TY - GEN A1 - Morozova, Iuliia A1 - Kehm, Christian A1 - Obrosov, Aleksei A1 - Yang, Yitong A1 - Miah, Kamal Uddin Mohammad A1 - Uludintceva, Elena A1 - Fritzsche, Sebastian A1 - Weiß, Sabine A1 - Michailov, Vesselin T1 - On the Heat Treatment of Selective-Laser-Melted 316L T2 - Journal of Materials Engineering and Performance N2 - The effect of heat treatment at various temperatures (650, 850, 1050, and 1100°C) and dwell times (10 min and 1 h) on the metallurgical and microstructural evolution as well as on the related tensile properties of stainless steel 316L processed by selective laser melting (SLM) has been systematically evaluated. The metallurgical and microstructural features such as defects, stability of the columnar–cellular structure and substructure, second phase particles, and phase transformation imparted by SLM and heat treatment have been discussed. It has been shown that the processing conditions specific to SLM significantly alter the kinetics of phase evolution compared to standard welding techniques which affects the accuracy of the prediction. The influence of these characteristics on tensile properties and hardness was elucidated. It was disclosed that with increasing heat treatment temperature there was a gradual increase in elongation but a decrease in strength related to the dislocation density and the development of the microstructure. KW - 316L KW - grain structure KW - phase evolution KW - SLM KW - tensile properties Y1 - 2023 U6 - https://doi.org/10.1007/s11665-022-07404-0 SN - 1544-1024 VL - 32 (2023) IS - 10 SP - 4295 EP - 4305 ER - TY - GEN A1 - Kashkarov, Egor B. A1 - Obrosov, Aleksei A1 - Sutygina, Alina A1 - Uludintceva, Elena A1 - Mitrofanov, Andrei A1 - Weiß, Sabine T1 - Hydrogen Permeation, and Mechanical and Tribological Behavior, of CrNx Coatings Deposited at Various Bias Voltages on IN718 by Direct Current Reactive Sputtering T2 - Coatings N2 - In the current work, the microstructure, hydrogen permeability, and properties of chromium nitride (CrNₓ) thin films deposited on the Inconel 718 superalloy using direct current reactive sputtering are investigated. The influence of the substrate bias voltage on the crystal structure, mechanical, and tribological properties before and after hydrogen exposure was studied. It was found that increasing the substrate bias voltage leads to densification of the coating. X-ray diffraction (XRD) results reveal a change from mixed fcc-CrN + hcp-Cr₂N to the approximately stoichiometric hcp-Cr₂N phase with increasing substrate bias confirmed by wavelength-dispersive X-ray spectroscopy (WDS). The texture coefficients of (113), (110), and (111) planes vary significantly with increasing substrate bias voltage. The hydrogen permeability was measured by gas-phase hydrogenation. The CrN coating deposited at 60 V with mixed c-CrN and (113) textured hcp-Cr₂N phases exhibits the lowest hydrogen absorption at 873 K. It is suggested that the crystal orientation is only one parameter influencing the permeation resistance of the CrNx coating together with the film structure, the presence of mixing phases, and the packing density of the structure. After hydrogenation, the hardness increased for all coatings, which could be related to the formation of a Cr₂O₃ oxide film on the surface, as well as the defect formation after hydrogen loading. Tribological tests reveal that hydrogenation leads to a decrease of the friction coefficient by up to 40%. The lowest value of 0.25 ± 0.02 was reached for the CrNₓ coating deposited at 60 V after hydrogenation. KW - CrNx coatings KW - Physical Vapour Deposition (PVD) KW - hydrogenation KW - tribology KW - mechanical properties KW - X-ray diffraction Y1 - 2018 UR - http://www.mdpi.com/2079-6412/8/2/66/htm U6 - https://doi.org/10.3390/coatings8020066 SN - 2079-6412 N1 - Special Issue "Surface Preparation and Treatments for Enhancing the Coating Performance" VL - 8 IS - 2 ER -