TY - CHAP A1 - Tallarida, Massimo T1 - III-V/oxide interfaces investigated with synchrotron radiation photoemission spectroscopy T2 - Meeting Abstracts-Electrochemical Society, Pacific Rim Meeting on Electrochemical and Solid-State Science, Honolulu, 2012 KW - interfaces KW - III/V KW - Synchrotron Photoemission Spectroscopy Y1 - 2012 UR - http://ma.ecsdl.org/content/MA2012-02/31/2587.full.pdf+html N1 - MA2012-02(31) SP - 2587 EP - 2587 PB - The Electrochemical Society ER - TY - GEN A1 - Tallarida, Massimo A1 - Adelmann, Christoph A1 - Delabie, Annelies A1 - Elshocht, Sven van A1 - Caymax, Matty A1 - Schmeißer, Dieter T1 - III-V/Oxide Interfaces Investigated with Synchrotron Radiation Photoemission Spectroscopy T2 - ECS Transactions N2 - We used synchrotron radiation photoemission spectroscopy (SR-PES) to investigate the surface of GaAs and other III-V semiconductors after tri-methyl-aluminum (TMA) pulses performed at 250{degree sign}C. We observed the removal of native oxide and the growth of Al-oxide upon measuring the As3d, Ga3d, Al2p and VB spectra. After seven TMA pulses we performed one water pulse. As3d and Ga3d peaks showed almost no lineshape change, but a decrease of intensity due to the water adsorption. The valence band shows a change in the secondary electron cut-off and the decrease of work function. We conclude that water mostly adsorbs molecularly and induces the work function decrease. The molecular absorption of water indicates that the seven TMA pulses produce a passivated surface only partially terminated with OH groups. KW - Interfaces KW - III/V KW - Synchrotron Photoemission Spectroscopy Y1 - 2013 U6 - https://doi.org/10.1149/05004.0123ecst SN - 1938-6737 VL - 50 IS - 4 SP - 123 EP - 128 ER - TY - GEN A1 - Barreca, Davide A1 - Carraro, Giorgio A1 - Gasparotto, Alberto A1 - Maccato, Chiara A1 - Rossi, Francesca A1 - Salviati, Giancarlo A1 - Tallarida, Massimo A1 - Das, Chittaranjan A1 - Fresno, Fernando A1 - Korte, Dorota A1 - Štangar, Urška Lavrenčič A1 - Franko, Mladen A1 - Schmeißer, Dieter T1 - Surface Functionalization of Nanostructured Fe2O3 Polymorphs: From Design to Light-Activated Applications T2 - ACS Applied Materials & Interfaces N2 - Nanostructured iron(III) oxide deposits are grown by chemical vapor deposition (CVD) at 400−500 °C on Si(100) substrates from Fe(hfa)2TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N′N′-tetramethylethylenediamine), yielding the selective formation of α-Fe2O3or the scarcely studiedε-Fe2O3 polymorphs under suitably optimized preparative conditions. By using Ti(OPr i)4(OPri= iso-propoxy) and water asatomic layer deposition (ALD) precursors, we subsequently functionalized the obtained materials at moderate temperatures (<300°C) by an ultrathin titanomagnetite (Fe3−xTixO4) overlayer. An extensive multitechnique character-ization, aimed at elucidating the system structure, morphology, composition and optical properties, evidenced that the photoactivated hydrophilic and photocatalytic behavior of the synthesized materials is dependent both on iron oxide phase composition and ALD surface modification. The proposed CVD/ALD hybrid synthetic approach candidates itself as a powerful tool for a variety of applications where semiconductor-based nanoarchitectures can benefit from the coupling with an ad hoc surface layer. KW - chemical vapor deposition KW - atomic layer deposition KW - iron oxide KW - titanomagnetite KW - photoactivated properties Y1 - 2013 U6 - https://doi.org/10.1021/am401475g SN - 1944-8252 VL - 5 IS - 15 SP - 7130 EP - 7138 ER - TY - GEN A1 - Adelmann, Christoph A1 - Cuypers, Daniel A1 - Tallarida, Massimo A1 - Rodriguez, Leonard A1 - De Clercq, Astrid A1 - Friedrich, Daniel A1 - Conard, Thierry A1 - Delabie, Annelies A1 - Seo, Jin Won A1 - Locquet, Jean-Pierre A1 - De Gendt, Stefan A1 - Schmeißer, Dieter A1 - Elshocht, Sven van A1 - Caymax, Matty T1 - Surface Chemistry and Interface Formation during the Atomic Layer Deposition of Alumina from Trimethylaluminum and Water on Indium Phosphide T2 - Chemistry of Materials N2 - The surface chemistry and the interface formation during the initial stages of the atomic layer deposition (ALD) of Al2O3 from trimethylaluminum (TMA) and H2O on InP(100)were studied by synchrotron radiation photoemission spectroscopy and scanning tunneling microscopy. The effect of the ex situ surface cleaning by either H2SO4 or (NH4)2S was examined. It is shown that the native oxide on the InP surface consisted mainly of indium hydrogen phosphates with a P enrichment at the interface with InP. After a (NH4)2S treatment, S was present on the surface as a sulfide in both surface and subsurface sites. Exposure to TMA led to the formation of a thin AlPO4 layer, irrespective of the surface cleaning. The surface Fermi level of p-type InP was found to be pinned close to midgap after H2SO4 cleaning and moved only slightly further toward the conduction band edge upon TMA exposure, indicating that the AlPO4/InP interface was rather defective. (NH4)2S passivation led to a Fermi level position of p-type InP close to the conduction band edge. Hence, the InP surface was weakly inverted, which can be attributed to surface doping by S donors. TMA exposure was found to remove surface S, which was accompanied by a shift of the Fermi level to midgap, consistent with the removal of (part of) the S donors in combination with a defective AlPO4/InP interface. Further TMA/H2O ALD did not lead to any detectable changes of the AlPO4/InP interface and suggested simple overgrowth with Al2O3. Y1 - 2013 U6 - https://doi.org/10.1021/cm304070h SN - 1520-5002 VL - 25 IS - 7 SP - 1078 EP - 1091 ER - TY - GEN A1 - Rossi, Francesca A1 - Fabbri, Filippo A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Modreanu, Mircea A1 - Attolini, Giovanni A1 - Salviati, Giancarlo T1 - Structural and luminescence properties of HfO2 nanocrystals grown by atomic layer deposition on SiC/SiO2 core/shell nanowires T2 - Scripta Materialia N2 - In this work we report the morphological, structural and luminescence properties of HfO2 nanocrystals grown on the surface of SiC/SiO2 core/shell nanowires by atomic layer deposition. All the studies are carried out in comparison with HfO2 nanocrystal aggregates grown on planar oxidized silicon substrates. The structural analyses reveal that HfO2has monoclinic structure with dif-ferent orientations. The cathodoluminescence emission shows the main components at 2.7 and 2.3 eV, deeply influenced by the arrangement and aggregation of the nanocrystals. KW - Silicon carbide KW - Silicon dioxide KW - Nanowires KW - Hafnium oxide KW - Nanocrystals Y1 - 2013 U6 - https://doi.org/10.1016/j.scriptamat.2013.08.017 SN - 1359-6462 VL - 69 IS - 10 SP - 744 EP - 747 ER - TY - GEN A1 - Haeberle, Jörg A1 - Henkel, Karsten A1 - Gargouri, Hassan A1 - Naumann, Franziska A1 - Gruska, Bernd A1 - Arens, Michael A1 - Tallarida, Massimo A1 - Schmeißer, Dieter T1 - Ellipsometry and XPS comparative studies of thermal and plasma enhanced atomic layer deposited Al2O3-films T2 - Beilstein Journal of Nanotechnology N2 - We report on results on the preparation of thin (<100 nm) aluminum oxide (Al2O3) films on silicon substrates using thermal atomic layer deposition (T-ALD) and plasma enhanced atomic layer deposition (PE-ALD) in the SENTECH SI ALD LL system. The T-ALD Al2O3layers were deposited at 200 °C, for the PE-ALD films we varied the substrate temperature range between room temperature (rt) and 200 °C. We show data from spectroscopic ellipsometry (thickness, refractive index, growth rate) over 4” wafers and correlatethem to X-ray photoelectron spectroscopy (XPS) results. The 200°C T-ALD and PE-ALD processes yield films with similar refractive indices and with oxygen to aluminum elemental ratios very close to the stoichiometric value of 1.5. However, in both also fragments of the precursor are integrated into the film. The PE-ALD films show an increased growth rate and lower carbon contaminations. Reducing the deposition temperature down to rt leads to a higher content of carbon and CH-species. We also find a decrease of the refractive index and of the oxygen to aluminum elemental ratio as well as an increase of the growth rate whereas the homogeneity of the film growth is not influenced significantly. Initial state energy shifts in all PE-ALD samples are observed which we attribute to a net negative charge within the films. KW - Al2O3 KW - ALD KW - ellipsometry KW - PE-ALD KW - XPS Y1 - 2013 U6 - https://doi.org/10.3762/bjnano.4.83 SN - 2190-4286 VL - 2013 IS - 4 SP - 732 EP - 742 ER - TY - CHAP A1 - Cuypers, Daniel A1 - Dorp, Dennis H. von A1 - Tallarida, Massimo A1 - Brizzi, Simone A1 - Rodriguez, Leonard A1 - Conard, Thierry A1 - Arnauts, Sophia A1 - Schmeißer, Dieter A1 - Adelmann, Christoph A1 - De Gendt, Stefan T1 - Study of InP Surfaces After Wet Chemical Treatments T2 - Meeting Abstracts-Electrochemical Society, San Francisco, 2013 KW - Synchrotron Radiation Photoelectron Spectroscopy KW - InP KW - Wet chemical treatment Y1 - 2013 UR - http://ma.ecsdl.org/content/MA2013-02/30/2132.full.pdf+html N1 - MA2013-02(30) SP - S. 2132 PB - The Electrochemical Society ER - TY - GEN A1 - Cuypers, Daniel A1 - Dorp, Dennis H. von A1 - Tallarida, Massimo A1 - Brizzi, Simone A1 - Rodriguez, Leonard A1 - Conard, Thierry A1 - Arnauts, Sophia A1 - Schmeißer, Dieter A1 - Adelmann, Christoph A1 - De Gendt, Stefan T1 - Study of InP Surfaces after Wet Chemical Treatments T2 - ECS Transactions N2 - In this work synchrotron radiation photoemission spectroscopy (SRPES) is used to study InP surfaces after different wet chemical treatments. All results are compared to a typical fingerprint of surface components present on an as received InP sample. It is shown that acidified (HCl and H₂SO₄) treatments efficiently remove the native phosphate, although components like Pᴼ, Inᴼ and P(2±∆)+ remain present. In alkaline solution (NH₄OH) oxide remains present at the surface. As an alternative treatment, the immersion into (NH₄)₂S was studied. This passivation treatment results in fewer surface components which suggests that a higher quality surface is obtained. KW - Synchrotron Radiation Photoelectron Spectroscopy KW - InP KW - Wet chemical treatment Y1 - 2013 U6 - https://doi.org/10.1149/05806.0297ecst SN - 1938-6737 SN - 1938-5862 VL - 58 IS - 6 SP - 297 EP - 303 ER - TY - GEN A1 - Cuypers, Daniel A1 - Dorp, Dennis H. von A1 - Tallarida, Massimo A1 - Brizzi, Simone A1 - Conard, Thierry A1 - Rodriguez, Leonard A1 - Mees, M. A1 - Arnauts, Sophia A1 - Schmeißer, Dieter A1 - Adelmann, Christoph A1 - De Gendt, Stefan T1 - Study of InP Surfaces after Wet Chemical Treatments T2 - ECS Journal of Solid State Science and Technology N2 - The influence of different wet chemical treatments (HCl, H₂SO₄, NH₄OH) on the composition of InP surfaces is studied by using synchrotron radiation photoemission spectroscopy (SRPES). It is shown that a significant amount of oxide remains present after immersion in a NH₄OH solution which is ascribed to the insolubility of In³⁺ at higher pH values. Acidic treatments efficiently remove the native oxide, although components like Pᴼ, Inᴼ and P(2±Δ)+ suboxides are observed. Alternatively, the influence of a passivation step in (NH₄)₂S solution on the surface composition was investigated. The InP surface after immersion into (NH₄)₂S results in fewer surface components, without detection of Pᴼ and P(2±Δ)+ suboxides. Finally, slight etching of InP surfaces in HCl/H₂O₂ solution followed by a native oxide removal step, showed no significant effect on the surface composition. KW - Synchrotron Radiation Photoelectron Spectroscopy KW - Scanning Tunneling Microscopy KW - InP KW - Wet chemical treatment Y1 - 2014 U6 - https://doi.org/10.1149/2.005401jss SN - 2162-8777 SN - 2162-8769 VL - 3 IS - 1 SP - N3016 EP - N3022 ER - TY - GEN A1 - Das, Chittaranjan A1 - Tallarida, Massimo A1 - Schmeißer, Dieter T1 - Linear dichroism in ALD layers of TiO₂ T2 - Environmental Earth Sciences N2 - We prepare TiO₂film by ALD and study their electronic properties by soft X-ray absorption spectroscopy (XAS) and photoelectron spectroscopy. We focus on XAS and X-ray linear dichroism to indentify band onset and learn about local distortion of the Ti–O octahedral atomic and about defects which cause Ti-based electronic states within the band gap. KW - Anatase KW - Dichroism KW - Amorphous Y1 - 2013 U6 - https://doi.org/10.1007/s12665-013-2836-7 SN - 1866-6280 VL - 70 IS - 8 SP - 3785 EP - 3795 ER - TY - GEN A1 - Henkel, Karsten A1 - Gargouri, Hassan A1 - Gruska, Bernd A1 - Arens, Michael A1 - Tallarida, Massimo A1 - Schmeißer, Dieter T1 - Capacitance and conductance versus voltage characterization of Al2O3 layers prepared by PE-ALD at 25°C ≤ T ≤ 200°C T2 - Journal of Vacuum Science and Technology A N2 - In this work, plasma enhanced atomic layer deposited (PE-ALD) samples were prepared at substrate temperatures in the range between room temperature (RT) and 200 °C and investigated by capacitance–voltage and conductance–voltage recordings. The measurements are compared to standard thermal atomic layer deposition (T-ALD) at 200 °C. Very low interface state density (D it) ~1011 eV−1 cm−2 could be achieved for the PE-ALD process at 200 °C substrate temperature after postdeposition anneal (PDA) in forming gas at 450 °C. The PDA works very effectively for both the PE-ALD and T-ALD at 200 °C substrate temperature delivering also similar values of negative fixed charge density (N fix) around −2.5 × 1012 cm−2. At the substrate temperature of 150 °C, highest N fix (−2.9 × 1012 cm−2) and moderate D it (2.7 × 1011 eV−1 cm−2) values were observed. The as deposited PE-ALD layer at RT shows both low D it in the range of (1 to 3) × 1011 eV−1 cm−2 and low N fix (−4.4 × 1011 cm−2) at the same time. The dependencies of N fix, D it, and relative permittivity on the substrate temperatures and its adjustability are discussed. KW - Atomic layer deposition (ALD) KW - Al2O3 KW - dielectric properties KW - interface state density KW - fixed oxide charge KW - permittivity Y1 - 2014 UR - http://link.aip.org/link/?JVA/32/01A107&aemail=author U6 - https://doi.org/10.1116/1.4831897 VL - 1 IS - 32 SP - 01A107-1 EP - 01A107-10 ER - TY - GEN A1 - Tallarida, Massimo A1 - Das, Chittaranjan A1 - Schmeißer, Dieter T1 - Quantum size effects in TiO2 thin films grown by atomic layer deposition T2 - Beilstein Journal of Nanotechnology N2 - We study the atomic layer deposition of TiO2 by means of X-ray absorption spectroscopy. The Ti precursor, titanium isopropoxide, was used in combination with H2O on Si/SiO2 substrates that were heated at 200 °C. The low growth rate (0.15 Å/cycle) and the in situ characterization permitted to follow changes in the electronic structure of TiO2 in the sub-nanometer range, which are influenced by quantum size effects. The modified electronic properties may play an important role in charge carrier transport and separation, and increase the efficiency of energy conversion systems. KW - atomic layer deposition (ALD) KW - charge transfer multiplet KW - covalency KW - energy conversion KW - quantum size effects KW - titanium dioxide (TiO2) KW - water splitting KW - X-ray absorption spectroscopy (XAS) Y1 - 2014 U6 - https://doi.org/10.3762/bjnano.5.7 SN - 2190-4286 IS - 5 SP - 77 EP - 82 ER - TY - GEN A1 - Adelmann, Christoph A1 - Schram, Tom A1 - Chew, Soon Aik A1 - Woicik, J. C. A1 - Brizzi, Simone A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Horiguchi, Naoto A1 - Elshocht, Sven van A1 - Ragnarsson, Lars-Åke T1 - On the scalability of doped hafnia thin films T2 - Applied Physics Letters N2 - The scaling behavior of Gd- and Al-doped HfO2 films as gate dielectrics in metal-oxide-semiconductor (MOS) capacitors was studied. For equivalent oxide thicknesses (EOTs) in the range of 10 Å, crystallized Gd:HfO2 showed higher leakage current densities than crystallized Al:HfO2, with undoped HfO2 in between. Ultimately, the scalability of Al:HfO2 was limited by the ability to crystallize the films at a given thermal budget. As a result, for post-deposition annealing at 800 °C, the EOT of Al:HfO2 based MOS capacitors was limited to ∼8 Å. However, for such an EOT, leakage current densities were reduced by about 100× with respect to HfO2. This demonstrates the high potential of Al:HfO2 for low-standby-power MOS devices. KW - scalability KW - hafnia thin films KW - Al:HfO2 KW - Gd:HfO2 KW - EXAFS KW - equivalent oxide thickness (EOT) KW - leakage current KW - X-ray absorption spectroscopy (XAS) Y1 - 2014 U6 - https://doi.org/10.1063/1.4870075 SN - 0003-6951 SN - 1077-3118 IS - 104 SP - 122906-1 EP - 122906-4 ER - TY - CHAP A1 - Henkel, Karsten A1 - Tallarida, Massimo A1 - Haeberle, Jörg A1 - Gargouri, Hassan A1 - Naumann, Franziska A1 - Gruska, Bernd A1 - Arens, Michael A1 - Schmeißer, Dieter ED - Glück, Bernhard K. ED - Schmidt, Sindy ED - Stein, Erhard ED - Raschke, Jörg-Uwe ED - Richter, Hans T1 - PE-ALD-Al2O3-Schichten für die Passivierung von Solarzellen T2 - Tagungsband Photovoltaik-Meeting: Anwendungen-Qualität-Perspektiven, Senftenberg, 16.04.2014 N2 - Dünne Al2O3-Schichten wurden bei Substrattemperaturen zwischen Raumtemperatur und 200°C mittels PE-ALD auf Si-Substraten abgeschieden und ellipsometrisch, spektroskopisch und elektrisch charakterisiert. Ihr Potenzial für die chemische und Feldeffektpassivierung der Oberflächenrekombination wird bewertet. KW - Al2O3 KW - Atomlagenabscheidung (ALD) KW - Passivierung KW - PE-ALD KW - negative fixe Oxidladungen Y1 - 2014 SP - 7 EP - 14 PB - Cottbus-Senftenberg CY - BTU ER - TY - GEN A1 - Tallarida, Massimo A1 - Das, Chittaranjan A1 - Cibrev, Dejan A1 - Kukli, Kaupo A1 - Tamm, Aile A1 - Ritala, Mikko A1 - Lana-Villarreal, Teresa A1 - Gómez, Roberto A1 - Leskelä, Markku A1 - Schmeißer, Dieter T1 - Modification of Hematite Electronic Properties with Trimethyl Aluminum to Enhance the Efficiency of Photoelectrodes T2 - The Journal of Physical Chemistry Letters N2 - The electronic properties of hematite were investigated by means of synchrotron radiation photoemission (SR-PES) and X-ray absorption spectroscopy (XAS). Hematite samples were exposed to trimethyl aluminum (TMA) pulses, a widely used Al-precursor for the atomic layer deposition (ALD) of Al2O3. SR-PES and XAS showed that the electronic properties of hematite were modified by the interaction with TMA. In particular, the hybridization of O 2p states with Fe 3d and Fe 4s4p changed upon TMA pulses due to electron inclusion as polarons. The change of hybridization correlates with an enhancement of the photocurrent density due to water oxidation for the hematite electrodes. Such an enhancement has been associated with an improvement in charge carrier transport. Our findings open new perspectives for the understanding and utilization of electrode modifications by very thin ALD films and show that the interactions between metal precursors and substrates seem to be important factors in defining their electronic and photoelectrocatalytic properties. KW - Hematite KW - Atomic Layer deposition KW - Photoelectrode KW - electro-catalysis KW - TMA KW - efficiency enhancement Y1 - 2014 U6 - https://doi.org/10.1021/jz501751w VL - 5 IS - 20 SP - 3582 EP - 3587 ER - TY - GEN A1 - Indra, Arindam A1 - Menezes, Prashanth W. A1 - Sahraie, Nastaran Ranjbar A1 - Bergmann, Arno A1 - Das, Chittaranjan A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Strasser, Peter A1 - Driess, Matthias T1 - Unification of Catalytic Water Oxidation and Oxygen Reduction Reactions: Amorphous Beat Crystalline Cobalt Iron Oxides T2 - Journal of the American Chemical Society N2 - Catalytic water splitting to hydrogen and oxygen is considered as one of the convenient routes for the sustainable energy conversion. Bifunctional catalysts for the electrocatalytic oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are pivotal for the energy conversion and storage, and alternatively, the photochemical water oxidation in biomimetic fashion is also considered as the most useful way to convert solar energy into chemical energy. Here we present a facile solvothermal route to control the synthesis of amorphous and crystalline cobalt iron oxides by controlling the crystallinity of the materials with changing solvent and reaction time and further utilize these materials as multifunctional catalysts for the unification of photochemical and electrochemical water oxidation as well as for the oxygen reduction reaction. Notably, the amorphous cobalt iron oxide produces superior catalytic activity over the crystalline one under photochemical and electrochemical water oxidation and oxygen reduction conditions. KW - photochemical KW - electrochemical KW - catalyst KW - water oxidation reaction KW - oxygen reduction reaction KW - cobalt iron oxides KW - control of crytallinity Y1 - 2014 U6 - https://doi.org/10.1021/ja509348t SN - 1520-5126 SN - 0002-7863 VL - 2014 IS - 136 SP - 17530 EP - 17536 ER - TY - GEN A1 - Das, Chittaranjan A1 - Henkel, Karsten A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Gargouri, Hassan A1 - Kärkkänen, Irina A1 - Schneidewind, Jessica A1 - Gruska, Bernd A1 - Arens, Michael T1 - Thermal and plasma enhanced atomic layer deposition of TiO2: Comparison of spectroscopic and electric properties T2 - Journal of Vacuum Science and Technology A N2 - Titanium oxide (TiO2) deposited by atomic layer deposition (ALD) is used as a protective layer in photocatalytic water splitting system as well as a dielectric in resistive memory switching. The way ALD is performed (thermally or plasma-assisted) may change the growth rate as well as the electronic properties of the deposited films. In the present work, the authors verify the influence of the ALD mode on functional parameters, by comparing the growth rate and electronic properties of TiO2 films deposited by thermal (T-) and plasma-enhanced (PE-) ALD. The authors complete the study with the electrical characterization of selected samples by means of capacitance–voltage and current–voltage measurements. In all samples, the authors found a significant presence of Ti3+ states, with the lowest content in the PE-ALD grown TiO2 films. The observation of Ti3+ states was accompanied by the presence of in-gap states above the valence band maximum. For films thinner than 10 nm, the authors found also a strong leakage current. Also in this case, the PE-ALD films showed the weakest leakage currents, showing a correlation between the presence of Ti3+ states and leakage current density. KW - titanium oxide (TiO2) KW - atomic layer deposition KW - plasma enhanced atomic layer deposition KW - synchrotron radiation photoelectron spectroscopy (SR-PES) KW - x-ray absorption spectroscopy KW - capacitance-voltage (CV) KW - current-voltage (IV) KW - ellipsometry KW - in-gap states Y1 - 2015 U6 - https://doi.org/10.1116/1.4903938 SN - 1520-8559 SN - 0734-2101 VL - 2015 IS - 33 SP - 01A144-1 EP - 01A144-8 ER - TY - CHAP A1 - Tallarida, Massimo A1 - Sohal, Rakesh A1 - Schmeißer, Dieter T1 - Electronic properties of the 2x1 3C-SiC surface reconstruction studied with resonant photoemission T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 41 N2 - We have studied the 2x1 reconstructed surface of the 3C-SiC polytype by means of photoemission spectroscopy. The reconstruction was characterized through Si2p and C1s core level and angle-integrated valence band spectroscopy, and confirmed by the observation of a two-domain 2x1 LEED pattern. The electronic properties of this surface were investigated by collecting valence band spectra at photon energies near the Si2p and C1s absorption edges. The results show a strong dependence of the photoemission intensity on the excitation energy with characteristic resonances for certain valence band features. With a detailed study of the resonances we are able to assign the electronic origin of the resonating states and the nature of the electronic transition near the absorption edges. Y1 - 2006 UR - http://www.dpg-verhandlungen.de/year/2006/conference/dresden/part/hl/session/5/contribution/2 SN - 0420-0195 SP - S. 239 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Kolanek, Krzysztof A1 - Karavaev, Konstantin A1 - Tallarida, Massimo A1 - Schmeißer, Dieter T1 - Atomic layer deposition of HfO2 onto SiO2 substrates investigated in-situ by non-contact UHV/AFM T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - We investigated in-situ the atomic layer deposition (ALD) of HfO2 onto SiO2 substrates with ultra high vacuum (UHV) non-contact atomic force microscope (NC-AFM). The ALD process was started after detailed analysis of the initial Si(001)/SiO2 substrate. The ALD cycles, made by using tetrakis-di-methyl-amido-Hf (TDMAHf) and water as precursors, were performed on the SiO2 substrate maintained at 230 ∘C. We studied the relation between the film growth and the root mean square surface roughness, surface skewness, kurtosis, fractal dimension and correlation length. In the initial stages of the ALD process with our analysis of the surface height histograms we were capable of determination: HfO2 layer thickness, surface coverage and surface roughness of a substrate and deposited material. Observation of the surface height histograms evolution during deposition allowed us to verify conformal and effective ALD growth on SiO2 substrate. With this detailed analysis of the surface topography we confirmed the completion of the first HfO2 layer after four ALD cycles. Y1 - 2010 SN - 0420-0195 SP - S. 248 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Michling, Marcel A1 - Tallarida, Massimo A1 - Kolanek, Krzysztof A1 - Schmeißer, Dieter T1 - In-situ EELS and UPS measurements on HfO2 ALD layers T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - In this contribution we report on our in-situ cycle-by-cycle (up to 10 cycles) investigations of the HfO2 ALD process using the methods of EELS and UPS. We used TDMA-Hf as a precursor and p-type Si wafer with natural oxide as the substrate. The EELS measurements were done with a primary energy of 52,5 eV and the UPS measurements with He I (21,218 eV). The change in the onset of the loss function is readily observed. Already after two cycles the value approach to the bulk value of HfO2. Upon ALD growth there is a remarkable decrease in the intensity of states within the gap. They are rather smooth and saturate after 10 cycles. With UPS we follow the variation of the VB onset and changes in the secondary electron onset. We summarize our data in a band diagram not based on bulk values but on cycle dependent quantities. With these cycle-by-cycle experiments we study the initial growth of HfO2 especially in the very first cycles. Y1 - 2010 UR - http://www.dpg-verhandlungen.de/year/2010/conference/regensburg/part/ds/session/24/contribution/5 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Starzyk, Łukasz A1 - Tallarida, Massimo A1 - Schmeißer, Dieter T1 - Electrically optimized high-κ metal gate MOSFET by specific modification of the band alignment T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - The electrical optimization of metal/oxide/semiconductor gate stacks by specific modification of the band alignment for advanced MOS technology incorporating high dielectric constant (κ) materials is explored. Because of requirements concerning continued scaling of MOSFET transistors, gate oxides and cobalt electrode have been grown successively on Si substrate respectively by means of atomic layer deposition (ALD) and evaporation. The thicknesses of high-κ films were around 2 nm. In case of work function engineering, interfaces’ chemistry plays a fundamental role. We applied synchrotron radiation based x-ray photoelectron spectroscopy (SR XPS) to characterize our samples, which allows step by step in situ investigations. Co 2p, Al 2p, Hf 4f, Si 2p and O 1s core levels spectra were measured and analyzed. From valence band (VB) spectra we determined Schottky barrier height and electronic bands offsets. Y1 - 2010 UR - http://www.dpg-verhandlungen.de/year/2010/conference/regensburg/part/ds/session/23/contribution/3 SN - 0420-0195 SP - S. 231 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Wyrodek, Jakub A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Weisheit, Martin T1 - Determination of interfacial layers in high - k ALD nanolaminate materials by ARXPS and SRXPS measurements T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - The interfacial layers of high dielectric constant (high - k) nanolaminate films are here explored. Problems concerning ALD nanolaminate layers deals mainly with lack of accurate methods to determine in depth profile of few nm thick stacks. Modified angle resolved XPS(ARXPS) and synchrotron radiation XPS(SRXPS) are proposed as methods suitable in layer profiling. Studied stacks containing ZrO/HfO or AlO/ZrO, were prepared on Si substrates by atomic layer deposition (ALD). Two sets of experiments were covered. First dealt with initial growth (up to 20 cycles, with thickness d < 2nm) of AlO/ZrO and included layer by layer insitu investigation by SRXPS. Second experiment refer to industrial grown ZrO/HfO films ( d ∼ 3nm ) processed with various parameters resulting in both, layer by layer and homogenous depositions. For those samples exsitu XPS, with angle dependent variation of probing depth, measurements were covered. By comparing obtained intensity ratios for different angles with computational developed stack model it was found that no simple layer by layer but some intermixing growth occurred including interaction with silicon substrate. Y1 - 2010 UR - http://www.dpg-verhandlungen.de/year/2010/conference/regensburg/part/ds/session/24/contribution/6 SN - 0420-0195 SP - S. 232 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Karavaev, Konstantin A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Zschech, Ehrenfried T1 - In-situ ALD growth of Hafnium oxide films T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - We report on a novel system for in-situ atomic layer growth (ALD) of high-k dielectric films. First results were obtained for Hf-oxide samples by using Hf-tetrachloride as precursor and water as oxidizer. We compare the photoelectron spectra of Si2p, O1s and Hf4f of our in-situ prepared films with samples (ex-situ) prepared by industrial ALD reactors and discuss similarities and differences observed in the core level spectra of the various samples by considering the different growth conditions. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/ds/session/23/contribution/12 SN - 0420-0195 SP - S. 244 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Tallarida, Massimo A1 - Karavaev, Konstantin A1 - Schmeißer, Dieter A1 - Zschech, Ehrenfried T1 - Photoemission and absorption spectroscopy for in situ investigations of the ALD growth T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 43 N2 - We have investigated the growth of Hf-oxide on Si by means of photoemission and X-ray absorption spectroscopy using synchrotron radiation at Bessy, Berlin. The Hf-oxide layers were grown via atomic layer deposition (ALD) using an in-situ ALD reactor attached to the investigation chamber. The XPS and XAS spectra were measured after every deposition cycle by transferring the sample into the investigation chamber without breaking the vacuum. From the experimental data we have obtained information about the early stages of the Hf-oxide growth, concerning in particular the reactivity of the interface with Si. Due to the possibility to study the layers after every cycle and with different oxidation parameters without exposing them to contaminants, the in situ investigation revealed to be a very important method to understand the growth properties of Hf-oxide. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/ds/session/22/contribution/5 SN - 0420-0195 SP - S. 242 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -