TY - GEN A1 - Städter, Matthias A1 - Müller, Klaus A1 - Rachow, Fabian A1 - Richter, Matthias A1 - Schmeißer, Dieter T1 - Ambient pressure thermal desorption spectroscopy (AP-TDS) of NiO/SiO2 catalysts T2 - Environmental Earth Sciences N2 - The Sabatier reaction is a key process in the "power-to-gas" application which is considered to con-tribute to future chemical energy storage systems. In this contribution we focus on the catalytic active sites of a NiO catalyst supported on SiO2(NiO/SiO2) which is commonly used in the Sabatier reaction. A novel technique for the characterization of the active sites is presented and dis-cussed using thermal desorption spectroscopy at ambient pressure. This analytical tool is operated under reaction conditions and allows element specific measurements during the catalytic process of CO2 reforming towards methane. Beside the desorption experiments, XPS and XAS measurements of pristine and catalytically used samples are performed to determine the influence of the Sabatier reaction conditions on the surface structure of the catalyst. KW - CO2 KW - NiO KW - TDS KW - XAS KW - XPS Y1 - 2013 U6 - https://doi.org/10.1007/s12665-013-2835-8 SN - 1866-6280 VL - 70 IS - 8 SP - 3779 EP - 3784 ER - TY - CHAP A1 - Hoffmannbeck, David A1 - Richter, Matthias A1 - Städter, Matthias A1 - Paloumpa, Ioanna A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Spectroscopic and microscopic characterization of potential catalysts for the hydrogenation of CO2 T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46 N2 - The reduction of CO2 emissions is a general demand of the society in order to avoid irreversible climate changes. We are investigating potential catalysts for the hydrogenation of CO2 in particular for its application in the so called oxyfuel combustion process. In order to understand the catalytic behavior of the investigated materials we use the techniques X-Ray Photoemission (XPS) and -absorption (XAS) Spectroscopy as well as X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The prospective of our work is to figure out the electronic and structural properties of the material and to optimize proper catalysts or design new ones for best catalytic activity. Beside the spectro-microscopic investigations the catalysts are tested under Sabatier reaction conditions in terms of activity, stability and sensitivity against poisoning. In our preliminary work we constructed a Sabatier reactor system with analytical parts based on infrared absorption and mass spectroscopy modules. First spectroscopic and catalytic results achieved on a commercially available Ru/Al2O3 catalyst will be presented. Y1 - 2011 UR - http://www.dpg-verhandlungen.de/year/2011/conference/dresden/part/o/session/60/contribution/123 SN - 0420-0195 SP - S. 483 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Rösken, Liz M. A1 - Rohrbeck, Magdalena A1 - Catena, Alberto A1 - Wehner, Stefan A1 - Fischer, Christian B. A1 - Richter, Matthias A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - Characterization of diamond-like carbon (DLC) coatings on industrial polyethylene and polyoxymethylene by SEM, AFM and NEXAFS T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - Diamond-like carbon (DLC) coatings are often utilized to change the base properties of raw materials, e. g. to gain robust or chemically inert surfaces. Here the deposition of hard DLC layers on soft polymers is tested. The common industrial polymers polyethylene (PE) and polyoxymethylene (POM) serve as model substrates in the present work. In order to examine the effect of the carbonaceous layers on PE and POM thin diamond-like carbon films were realized via PECVD. The topography of the different coatings was detected by AFM and SEM uncovering the different influence of the substrate material, e. g. interlayer formation for PE. The composition of the surface structures were analyzed in more detail by NEXAFS, showing the hybridization of carbon atoms in chemical different surroundings from the pure polymer to the carbon coating. The comparison of carbon coated PE- and POM-composites enables valuable insights into the interaction between soft substrates and hard coatings. For the chosen settings in PECVD, POM showed incomplete coating, while on PE a very stable and robust composite has formed. KW - Diamond-like carbon (DLC) KW - soft plolymers KW - Scanning electron microscopy (SEM) KW - Atomic foce microscopy (AFM) KW - Near-edge X-Ray absorption spectroscopy (NEXAFS) Y1 - 2014 UR - http://www.dpg-verhandlungen.de/year/2014/conference/dresden/part/ds/session/43/contribution/20?lang=en SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Richter, Matthias A1 - Städter, Matthias A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Multiple Auger Decay at resonant photo-excitation in carbon thin films T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - We use resonant photoemission at the C1s edge to study the electronic structure of HOPG, graphene flakes and monolayer graphene. We find remarkable differences in the profile of the Auger decay channels, which we attribute to an additional multiple-Auger with a three-hole final state. A prerequisite for the appearance of this decay mechanism is the existence of localized excitonic states, which cause the appearance of the multiple Auger decay. Defects (pits, holes, steps and kinks) can act as localized excitonic states. We use those effects to identify the existence and the quantity of such defect states within the pi*-band regime in carbon thin films, because the intensity of the three-hole Auger decay is varying with the defect density of the carbon films. The defect-excitonic states can be either localized in the band-gap at the M-point or in case of surface defects like steps, kinks or pits even at the K-point by losing the pure sp2 character of the films. We find that the appearance of the multiple Auger decay is different for multilayer and monolayer graphene. In particular the interaction of impurities leads to broadening of the C1s core levels. The three-hole Auger decay spectroscopy is a new method to detect such contaminations with a high sensitivity. KW - resonant photoelectron spectroscopy KW - Auger decay KW - multiple decay KW - carbon thin films Y1 - 2013 UR - http://www.dpg-verhandlungen.de/year/2013/conference/regensburg/part/hl/session/52/contribution/6?lang=de PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Städter, Matthias A1 - Richter, Matthias A1 - Schmeißer, Dieter T1 - Fano-Profiles in HOPG and graphene flakes T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - We investigated the electronic structure of the valence and conduction band of HOPG by 2D resonant photoemission spectroscopy. Our aim is to understand the electronic structure of defects and inhomogeneities in graphene and related materials in more detail. From our measurements we find that the transition from the sigma-band to the pi*-band at the M-point shows a characteristic Fano-Profile. A Fano-Profile occurs as the result of the interference of the band to band transition and a parallel transition to a discrete energy level within the band gap. The theory of Fano enables us to determine the energetic location of these discrete level. It is found to be several meV above the Fermi-Energy. Additional measurements on graphene flakes lead to similar results for the sigma- to pi*-band transition and the location of the discrete energy state. With this we not only can determine the energetic states of defects but also get a better understanding of the origin of the Fano profile which is a particular detail of the resonant absorption process. KW - resonant photoelectron spectroscopy KW - Fano profiles KW - Graphene KW - HOPG Y1 - 2013 UR - http://www.dpg-verhandlungen.de/year/2013/conference/regensburg/part/hl/session/52/contribution/5?lang=de PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Fischer, Christian B. A1 - Rohrbeck, Magdalena A1 - Wehner, Stefan A1 - Richter, Matthias A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - Interlayer formation of Diamond-Like Carbon Coatings on Polyethylene Plastic Material T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The coating of materials with diamond-like carbon (DLC) is a very common way to further improve and modify surface specific properties. Although DLC is frequently used as a protective coating on several substrates, the chemical and physical properties throughout the coating process on plastics are yet sparsely investigated. Different layer thicknesses of two types of protective coatings one sp3-enriched (robust, r-type) and one with more sp2-centers (flexible, f-type) have been realized on polyethylene by PECVD. Microscopic analysis showed diverse surface topographies for the two DLC-types. NEXAFS spectroscopy revealed significant details of carbon centers in chemically different neighborhood displaying a characteristic fingerprint behavior. The appropriate explanation for the current carbon deposition process is obviously the formation of an interlayer between these unequal materials. An improved understanding of hard DLC and soft polyethylene assembly is part of the present work. KW - Diamond-like carbon (DLC) KW - topography KW - X-ray absorption spectroscopy KW - plasma enhanced chemical vapor deposition Y1 - 2013 UR - http://www.dpg-verhandlungen.de/year/2013/conference/regensburg/part/o/session/33/contribution/4?lang=de PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Tallarida, Massimo A1 - Friedrich, Daniel A1 - Städter, Matthias A1 - Michling, Marcel A1 - Schmeißer, Dieter T1 - Growth of TiO2 with Thermal and Plasma Enhanced Atomic Layer Deposition T2 - Journal of Nanoscience and Nanotechnology Y1 - 2011 SN - 1533-4880 VL - 11 IS - 9 SP - 8049 EP - 8053 ER - TY - GEN A1 - Müller, Klaus A1 - Städter, Matthias A1 - Rachow, Fabian A1 - Hoffmannbeck, David A1 - Schmeißer, Dieter T1 - Sabatier-based CO2-methanation by catalytic conversion T2 - Environmental Earth Sciences N2 - The catalytic conversion of CO2is an important component for the reintegration of secondary products like CO2 or H2 into the energy supply. An example is the "power to gas’" concept with a conversion of CO2 into CH4. The CO2 is transferred into a carrier of chemical energy, with the possibility to feed the produced CH4 into the existing network of natural gas. At temperatures of around 350 °C, hydrogenation of CO2 to CH4 is possible by the Sabatier reaction CO2+4H2->CH4+H2O. One prerequisite for efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. The focus of catalyst development is given to their performance under the conditions to be expected in the special application. As a part of the project Geoenergy-Research (GeoEn), we address questions related to the catalytic utilization of CO2 produced in the course of the oxyfuel combustion of lignite. In this contribution, we report on the experimental setup in laboratory scale, which enables an advanced characterization of the catalytic performance, including thermodesorption measurements at atmospheric pressure in order to determine the amount of adsorbed CO2 under real conditions. We also show data for activation energies, the catalytic performance as function of temperature and the long time stability of a commercial Ru-based catalyst. KW - CO2 KW - Sabatier reaction KW - Catalysis KW - RuO2 Y1 - 2013 U6 - https://doi.org/10.1007/s12665-013-2609-3 SN - 1866-6280 VL - 70 IS - 8 SP - 3771 EP - 3778 ER - TY - THES A1 - Städter, Matthias T1 - Untersuchungen zu Fanoresonanzen in der resonanten Photoelektronenspektroskopie N2 - Im Mittelpunkt der vorliegenden Arbeit stehen die Untersuchung von Fanointerferenzen innerhalb der wissenschaftlichen Methode der resonanten Photoelektronenspektroskopie. Basis dieser Methode ist die Interpretation aus dem Festkörper emittierter Elektronen. Die detektierten Elektronen können dabei aus direkten Photoemissionen oder Deaktivierungsprozessen (Spectator-/Participator-Zerfälle) nach resonanten Anregungen von Rumpfelektronen stammen. Führen beide Prozesse zum selben Systemendzustand, können die emittierten Elektronen interferieren, was sich in der Ausprägung eines charakteristischen Intensitätsprofils, dem Fano-Profil, äußert. Die Form des Intensitätsprofils kann dabei über den Fanoparameter q beschrieben werden. Im Rahmen dieser Arbeit erfolgte die Diskussion von Fanointerferenzen an organischen (HOPG, Graphenflocken) und oxidischen (CuO, In2O3, SiO2) Materialsystemen. Im HOPG und den untersuchten Graphenflocken konnten mittels der Analyse der Fanoprofile exzitonische Zustände innerhalb der Bandlücke nachgewiesen werden. Durch die Untersuchungen am CuO konnte die Variation des Fanoparameters in Abhängigkeit vom Grundzustand des Systems gezeigt werden. Die für die untersuchten In2O3 Einristalle beobachteten Interferenzen beruhen auf der Existenz besetzter Zustände an der Fermienergie. Abschließend konnte eine Korrelation des jeweils auftretenden Fanoparameters mit den beobachteten multi-hole-Auger-Zerfällen nachgewiesen werden. KW - Fano KW - Fanointerferenzen KW - Festkörperphysik KW - In-gap Zustände KW - Resonante Photoelektronenspektroskopie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-31860 UR - http://opus4.kobv.de/opus4-btu/frontdoor/index/index/docId/3186 ER - TY - CHAP A1 - Tallarida, Massimo A1 - Deßmann, Nils A1 - Städter, Matthias A1 - Friedrich, Daniel A1 - Michling, Marcel A1 - Schmeißer, Dieter T1 - Atomic layer deposition of TiO T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46 N2 - We present a study of the initial growth of TiO2 on Si(111) by atomic layer deposition (ALD). The Si substrate was etched with NH4F before ALD to remove the native oxide film and to produce a Si-H termination. In−situ experiments by means of photoemission and X-ray absorption spectroscopy were conducted with synchrotron radiation on Ti-oxide films produced using Ti-tetra-iso-propoxide (TTIP) and water as precursors. O1s, Ti2p, C1s, and Si2p core level, and O1s and Ti2p absorption edges show the transition of the Ti-oxide properties during the first layers. The growth starts with a very small growth rate (0.03nm/cycle) due to the growth inhibition of the Si-H termination and proceeds with higher growth rate (0.1nm/cycle) after 1.5nm Ti-oxide has been deposited. Y1 - 2011 UR - http://www.dpg-verhandlungen.de/year/2011/conference/dresden/part/ds/session/12/contribution/2 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -