TY - GEN A1 - Gomez-Alvarez, Miguel Angel A1 - Morales, Carlos A1 - Méndez, Javier A1 - Campo, Adolfo del A1 - Urbanos, Fernando J. A1 - Díaz, Aarón A1 - Reséndiz, Luis A1 - Flege, Jan Ingo A1 - Granados, Daniel A1 - Soriano, Leonardo T1 - A Comparative Study of the ZnO Growth on Graphene and Graphene Oxide: The Role of the Initial Oxidation State of Carbon T2 - C - Journal of Carbon Research N2 - The role of the oxidation state of carbon on the early stages of growth of metal oxides was studied for the particular case of ZnO deposition on graphene and graphene oxide on SiO2 (G/SiO2 and GO/SiO2, respectively) substrates. The growth was carried out by thermal evaporation of metallic Zn under an oxygen atmosphere at room temperature. This technique permits quasi-equilibrium conditions during the oxide growth, allowing the characterization of the fundamental interaction between ZnO and the graphene-based substrates. Although in both cases ZnO follows a Volmer–Weber growth mode controlled by nucleation at defects, the details are different. In the case of the GO/SiO2 substrate, the nucleation process acts as a bottleneck, limiting the coverage of the complete surface and allowing the growth of very large ZnO structures in comparison to G/SiO2. Moreover, by studying the Zn-LMM Auger spectra, it is shown how the initial nature of the substrate influences the composition of the ZnO deposit during the very early stages of growth in terms of Zn/O atomic ratio. These results are compared to those previously reported regarding ZnO growth on graphite and graphene on Cu (G/Cu). This comparison allows us to understand the role of different characteristics of graphene-based substrates in terms of number of defects, oxidation state, graphene support substrate and number of graphene layers. KW - graphene KW - graphene oxide KW - zinc oxide KW - intrefaces KW - mode of growth KW - x-Ray photoelectron spectroscopy (XPS) KW - atomic force microscopy (AFM) KW - factor analyis Y1 - 2020 U6 - https://doi.org/10.3390/c6020041 SN - 2311-5629 VL - 6 IS - 2 ER - TY - GEN A1 - Morales, Carlos A1 - Leinen, Dietmar A1 - Flores, Eduardo A1 - Muñoz-Cortes, Esmeralda A1 - Leardini, Fabrice A1 - Ares, José Ramón A1 - Flege, Jan Ingo A1 - Soriano, Leonardo A1 - Ferrer, Isabel J. A1 - Sanchez, Carlos T1 - Imaging the Kirkendall effect in pyrite (FeS2) thin films: Cross-sectional microstructure and chemical features T2 - Acta Materialia N2 - This investigation provides novel data on the structure and chemical composition of pyrite thin films and new hints concerning their formation mechanism. From TEM-HAADF data, it has been found that the films are composed of two different layers: one is very compact and the other one is quite porous with many voids separating a few groups of grains. This porous layer is always in direct contact with the substrate, and its thickness is quite similar to that of the original Fe film. The average size of pyrite grains is equal in both layers, what suggests that the same process is responsible for their formation. Concentration profiles of sulfur, iron and some impurities (mainly sodium and oxygen from the glass substrate) through both layers are given in this work, and thus chemical inhomogeneities of the films are proved by the obtained stoichiometric ratios (S/Fe). Moreover, Na from sodalime glass substrates mainly accumulates at the pyrite grain boundaries and barely dopes them. The obtained results support the hypothesis that the iron sulfuration process essentially induces the diffusion of iron atoms, what leads to the porous layer formation as a manifestation of the Kirkendall Effect. Therefore, it seems that the same mechanisms that operate in the synthesis of surface hollow structures at the nanoscale are also active in the formation of pyrite thin films ranging from several tens to hundreds of nanometers. KW - Pyrite KW - Transmission electron microscopy (TEM) KW - Cross-section KW - Kirkendall effect KW - Sodium doping Y1 - 2021 U6 - https://doi.org/10.1016/j.actamat.2020.116582 SN - 1359-6454 SN - 1873-2453 VL - 205 ER - TY - GEN A1 - Morales, Carlos A1 - Pascual, Antonio A1 - Leinen, Dietmar A1 - Flores, Eduardo A1 - Muñoz-Cortes, Esmeralda A1 - Leardini, Fabrice A1 - Ares, José Ramón A1 - Flege, Jan Ingo A1 - Soriano, Leonardo A1 - Ferrer, Isabel J. A1 - Sanchez, Carlos T1 - Reaction Mechanism and Kinetic Model of Fe Thin Film Transformation into Monosulfides (FeS): First Step of the Fe Films Sulfuration Process into Pyrite T2 - The Journal of Physical Chemistry C N2 - The sulfuration of metallic iron layers into pyrite (FeS2) is preceded by an initial stage characterized by the iron transformation into monosulfide, which acts as a precursor of the disulfide. This work presents a comprehensive reaction and kinetic model of the sulfuration reaction of metallic iron thin films into monosulfides when a molecular sulfur (S2) atmosphere is used. By slowing down the sulfuration reaction, we have been able to follow in situ the evolution of the transport properties (electrical resistivity and Seebeck coefficient) of the Fe films during their sulfuration reaction to monosulfides. We show that two different stages characterize this initial sulfuration: (1) the transformation of Fe into hexagonal pyrrhotite (Fe → Fe1–xSH) and (2) a partial crystallographic transformation of this hexagonal pyrrhotite into orthorhombic pyrrhotite (Fe1–xSH → Fe1–xSO). A two-step process can explain the pyrrhotite hexagonal phase formation, being first controlled by the surface adsorption of S2 on the external sample interface (S2/pyrrhotite) and second by the diffusion of Fe atoms through the formed pyrrhotite layer. By deducing the corresponding kinetic equations in terms of the experimental parameters (S2 partial pressure and thicknesses of the layers of present species), we can explain the evolution of the electrical resistance and Seebeck coefficient of the original Fe film during its transformation into monosulfide. At the same time, the appearance of the Kirkendall effect during the monosulfide phase formation is experimental and formally justified. The comprehensive description of this first stage of the complete sulfuration process of the Fe film into pyrite provides a layout to deeply discuss the influence of these intermedium phases on the final iron disulfide film characteristics and the appearance of potential film defects related to the experimental growth conditions. KW - Fe thin films KW - sulfuration KW - kinetics KW - transport properties KW - Kirkendall effect KW - Seebeck coefficient KW - resistivity Y1 - 2022 U6 - https://doi.org/10.1021/acs.jpcc.2c02060 SN - 1932-7455 SN - 1932-7447 VL - 126 IS - 32 SP - 13870 EP - 13883 ER - TY - GEN A1 - Morales, Carlos A1 - Leinen, Dietmar A1 - Campo, Adolfo del A1 - Ares, José Ramón A1 - Sánchez, Carlos A1 - Flege, Jan Ingo A1 - Gutiérrez, Alejandro A1 - Prieto, Pilar A1 - Soriano, Leonardo T1 - Growth and characterization of ZnO thin films at low temperatures: from room temperature to -120 °C T2 - Journal of Alloys and Compounds N2 - ZnO thin films have been grown by e-beam evaporation in the range from room temperature to − 120 °C on two types of substrates, Al2O3 (0001) and Si (100). Although the ZnO/Al2O3 system has been thoroughly characterized, including optical and electrical techniques, the morphological, structural and chemical properties show no significant differences between both substrates. Thus, the general features of the ZnO growth mode at low temperature can be generalized. The relatively low growth temperatures reduce the diffusion of atoms at the surface, which leads to morphological and chemical changes. As the temperature decreases, the growth mode changes from a van der Drift model to a gradual bilayer system composed of an interfacial layer in contact with the substrate and a second columnar-based layer. This second well-ordered film disappears for the lowest temperatures while a Zn-rich interface in contact with the substrate emerges. Precisely from this interface, Zn-rich whiskers develop under the ZnO film and cause the loss of adhesion at temperatures below − 100 °C. These extreme temperatures also affect the crystal size, lattice strain, and total amount of oxygen vacancies. The behavior of the optical and electrical properties in terms of band gap, transparency, electrical resistivity, and Seebeck coefficient is discussed in the light of structural and chemical characterization. Samples grown at 0 °C exhibit an enhanced transmittance compared to those grown at room temperature while preserving similar electrical resistivity values and natural n-type doping. These results open a promising route to enhance ZnO films properties below the typical high temperature window. KW - zinc oxide (ZnO) KW - thin films KW - morphology KW - scanning electron microscopy (SEM) KW - DRX KW - optical properties KW - electrical properties Y1 - 2021 U6 - https://doi.org/10.1016/j.jallcom.2021.161056 SN - 0925-8388 SN - 1873-4669 VL - 884 ER -