TY - PAT A1 - Brinkmann, Ralf Peter A1 - Oberrath, Jens A1 - Awakowicz, Peter A1 - Lapke, Martin A1 - Musch, Thomas A1 - Mussenbrock, Thomas A1 - Rolfes, Ilona A1 - Schulz, Christian A1 - Storch, Robert A1 - Styrnoll, Tim A1 - Zietz, Christian T1 - Device and Use of the Device for Measuring the Density and/or the Electron Temperature and/or the Collision Frequency of a Plasma Y1 - 2011 ER - TY - JOUR A1 - Koch, Matthias A1 - Schulz, Peter A1 - Baier, Daniel T1 - Entwicklungsstand und -perspektiven der Internet- und eCommerce-Aktivitäten von KMU am Beispiel der Baubranche Y1 - 2002 ER - TY - GEN A1 - Dasgupta, Sunanda A1 - Ay, Peter A1 - Schulz, Stephanie T1 - Determination and Comparison of Equilibrium Data of Various Plant-Based Fatty Acid Mixtures T2 - Chemical Engineering & Technology N2 - Multistage melt crystallization of a variety of plant-based polyunsaturated fatty acid (PUFA) mixtures was conducted to obtain an overview on their liquid-solid equilibrium behavior. Crystal fraction and mother liquor samples were analyzed at every stage. Phase behavior diagrams at low saturated fatty acid concentrations were investigated in detail as they are of significant technical relevance with respect to efficient depletion of the saturated content from the samples. A high oleic acid content in the PUFA mixtures led to difficulties in depleting the mother liquor from the saturated content by melt crystallization. Thermograms from the differential scanning calorimetry were supplemented with illustrations which allow a novel interpretation of results and verification of conclusions. KW - Differential scanning calorimeter, Fatty acids, Liquid-solid phase diagram, Metastable zone, Multistage melt crystallization Y1 - 2014 UR - http://onlinelibrary.wiley.com/doi/10.1002/ceat.201300630/abstract U6 - https://doi.org/10.1002/ceat.201300630 SN - 0930-7516 VL - 37 IS - 6 SP - 1002 EP - 1008 ER - TY - GEN A1 - Bischoff, Lena A1 - Hübner, Gerrit A1 - Korolov, Ihor A1 - Donkó, Zoltán A1 - Hartmann, Peter A1 - Gans, Timo A1 - Held, Julian A1 - Schulz-von der Gathen, Volker A1 - Liu, Yue A1 - Mussenbrock, Thomas A1 - Schulze, Julian T1 - Experimental and computational investigations of electron dynamics in micro atmospheric pressure radio-frequency plasma jets operated in He/N2 mixtures T2 - Plasma Sources Science and Technology Y1 - 2018 U6 - https://doi.org/10.1088/1361-6595/aaf35d SN - 1361-6595 SN - 0963-0252 VL - 27 IS - 12 ER - TY - GEN A1 - Prill, Robert A1 - Singh, Jasvinder A. A1 - Seeber, Gesine H. A1 - Mai Nielsen, Sabrina A1 - Goodman, Susan A1 - Michel, Sven A1 - Kopkow, Christian A1 - Schulz, Robert A1 - Choong, Peter A1 - Hommel, Hagen T1 - Patient, physiotherapist and surgeon endorsement of the core domain set for total hip and total knee replacement in Germany: a study protocol for an OMERACT initiative T2 - BMJ open Y1 - 2020 U6 - https://doi.org/10.1136/bmjopen-2019-035207 SN - 2044-6055 VL - 10 IS - 6 ER - TY - GEN A1 - Prill, Robert A1 - Singh, Jasvinder A. A1 - Seeber, Gesine H. A1 - Mai Nielsen, Sabrina A1 - Goodman, Susan A1 - Michel, Sven A1 - Kopkow, Christian A1 - Schulz, Robert A1 - Choong, Peter A1 - Hommel, Hagen T1 - Endorsement des OMERACT Core Domain Sets für Hüft- und Kniegelenkersatz: ein Survey unter Patienten, Physiotherapeuten und Orthopäden in Deutschland – ein Studienprotokoll T2 - 4. Forschungssymposium Physiotherapie, FSPT2019 Abstractband Y1 - 2019 UR - http://www.dgptw.org/symposien/fspt-2019/fspt2019-abstractband SP - 45 EP - 46 ER - TY - GEN A1 - Korolov, Ihor A1 - Leimkühler, Marc A1 - Boeke, Marc A1 - Donkó, Zoltan A1 - Schulz-von der Gathen, Volker A1 - Bischoff, Lena A1 - Hübner, Gerrit A1 - Hartmann, Peter A1 - Gans, Timo A1 - Liu, Yue A1 - Mussenbrock, Thomas A1 - Schulze, Julian T1 - Helium metastable species generation in atmospheric pressure RF plasma jets driven by tailored voltage waveforms in mixtures of He and N 2 T2 - Journal of Physics D: Applied Physics Y1 - 2020 U6 - https://doi.org/10.1088/1361-6463/ab6d97 SN - 1361-6463 VL - 53 ER - TY - GEN A1 - Neyret, Margot A1 - Le Provost, Gaëtane A1 - Boesing, Andrea Larissa A1 - Schneider, Florian D. A1 - Baulechner, Dennis A1 - Bergmann, Joana A1 - Vries, Franciska T. de A1 - Fiore-Donno, Anna Maria A1 - Geisen, Stefan A1 - Goldmann, Kezia A1 - Merges, Anna A1 - Saifutdinov, Ruslan A. A1 - Simons, Nadja K. A1 - Tobias, Joseph A. A1 - Zaitsev, Andrey S. A1 - Gossner, Martin M. A1 - Jung, Kirsten A1 - Kandeler, Ellen A1 - Krauss, Jochen A1 - Penone, Caterina A1 - Schloter, Michael A1 - Schulz, Stefanie A1 - Staab, Michael A1 - Wolters, Volkmar A1 - Apostolakis, Antonios A1 - Birkhofer, Klaus A1 - Boch, Steffen A1 - Boeddinghaus, Runa S. A1 - Bolliger, Ralph A1 - Bonkowski, Michael A1 - Buscot, François A1 - Dumack, Kenneth A1 - Fischer, Markus A1 - Gan, Huei Ying A1 - Heinze, Johannes A1 - Hölzel, Norbert A1 - John, Katharina A1 - Klaus, Valentin H. A1 - Kleinebecker, Till A1 - Marhan, Sven A1 - Müller, Jörg A1 - Renner, Swen C. A1 - Rillig, Matthias C. A1 - Schenk, Noëlle V. A1 - Schöning, Ingo A1 - Schrumpf, Marion A1 - Seibold, Sebastian A1 - Socher, Stephanie A. A1 - Solly, Emily F. A1 - Teuscher, Miriam A1 - Kleunen, Mark van A1 - Wubet, Tesfaye A1 - Manning, Peter T1 - A slow-fast trait continuum at the whole community level in relation to land-use intensification T2 - Nature Communications N2 - AbstractOrganismal functional strategies form a continuum from slow- to fast-growing organisms, in response to common drivers such as resource availability and disturbance. However, whether there is synchronisation of these strategies at the entire community level is unclear. Here, we combine trait data for 2800 above- and belowground taxa from 14 trophic guilds spanning a disturbance and resource availability gradient in German grasslands. The results indicate that most guilds consistently respond to these drivers through both direct and trophically mediated effects, resulting in a ‘slow-fast’ axis at the level of the entire community. Using 15 indicators of carbon and nutrient fluxes, biomass production and decomposition, we also show that fast trait communities are associated with faster rates of ecosystem functioning. These findings demonstrate that ‘slow’ and ‘fast’ strategies can be manifested at the level of whole communities, opening new avenues of ecosystem-level functional classification. KW - General Physics and Astronomy KW - General Biochemistry KW - General Chemistry KW - Multidisciplinary KW - Genetics and Molecular Biology Y1 - 2024 U6 - https://doi.org/10.1038/s41467-024-45113-5 SN - 2041-1723 VL - 15 IS - 1 ER - TY - GEN A1 - Roggenbuck, Dirk A1 - Goihl, Alexander A1 - Hanack, Katja A1 - Holzlöhner, Pamela A1 - Hentschel, Christian A1 - Veiczi, Miklos A1 - Schierack, Peter A1 - Reinhold, Dirk A1 - Schulz, Hans-Ulrich T1 - Serological diagnosis and prognosis of severe acute pancreatitis by analysis of serum glycoprotein 2 T2 - Clinical Chemistry and Laboratory Medicine Y1 - 2017 U6 - https://doi.org/10.1515/cclm-2016-0797 SN - 1437-4331 SN - 1434-6621 VL - 55 IS - 6 SP - 854 EP - 864 ER - TY - GEN A1 - Jurischka, Christoph A1 - Dinter, Franziska A1 - Efimova, Anastasia A1 - Weiss, Romano A1 - Schiebel, Juliane A1 - Schulz, Christian A1 - Fayziev, Bekzodjon A1 - Schierack, Peter A1 - Fischer, Thomas A1 - Rödiger, Stefan T1 - An explorative study of polymers for 3D printing of bioanalytical test systems T2 - Clinical Hemorheology and Microcirculation N2 - Background: The 3D printing is relevant as a manufacturing technology of functional models for forensic, pharmaceutical and bioanalytical applications such as drug delivery systems, sample preparation and point-of-care tests. Objective: Melting behavior and autofluorescence of materials are decisive for optimal printing and applicability of the product which are influenced by varying unknown additives. Methods: We have produced devices for bioanalytical applications from commercially available thermoplastic polymers using a melt-layer process. We characterized them by differential scanning calorimetry, fluorescence spectroscopy and functional assays (DNA capture assay, model for cell adhesion, bacterial adhesion and biofilm formation test). Results: From 14 tested colored, transparent and black materials we found only deep black acrylonitrile-butadiene-styrene (ABS) and some black polylactic acid (PLA) useable for fluorescence-based assays, with low autofluorescence only in the short-wave range of 300-400 nm. PLA was suitable for standard bioanalytical purposes due to a glass transition temperature of approximately 60°C, resistance to common laboratory chemicals and easy print processing. For temperature-critical methods, such as hybridization reactions up to 90°C, ABS was better suited. Conclusions: Autofluorescence was not a disadvantage per se but can also be used as a reference signal in assays. The rapid development of individual protocols for sample processing and analysis required the availability of a material with consistent quality over time. For fluorescence-based assays, the use of commercial standard materials did not seem to meet this requirement. KW - Thermal analysis KW - 3D Printing Y1 - 2020 UR - https://pubmed.ncbi.nlm.nih.gov/31929149/ U6 - https://doi.org/10.3233/CH-190713 SN - 1875-8622 VL - 75 IS - 1 SP - 57 EP - 84 ER -