TY - GEN A1 - Franck, Max A1 - Dabrowski, Jarek A1 - Schubert, Markus Andreas A1 - Vignaud, Dominique A1 - Achehboune, Mohamed A1 - Colomer, Jean‐François A1 - Henrard, Luc A1 - Wenger, Christian A1 - Lukosius, Mindaugas T1 - Investigating Impacts of Local Pressure and Temperature on CVD Growth of Hexagonal Boron Nitride on Ge(001)/Si T2 - Advanced Materials Interfaces N2 - AbstractThe chemical vapor deposition (CVD) growth of hexagonal boron nitride (hBN) on Ge substrates is a promising pathway to high‐quality hBN thin films without metal contaminations for microelectronic applications, but the effect of CVD process parameters on the hBN properties is not well understood yet. The influence of local changes in pressure and temperature due to different reactor configurations on the structure and quality of hBN films grown on Ge(001)/Si is studied. Injection of the borazine precursor close to the sample surface results in an inhomogeneous film thickness, attributed to an inhomogeneous pressure distribution at the surface, as shown by computational fluid dynamics simulations. The additional formation of nanocrystalline islands is attributed to unfavorable gas phase reactions due to the radiative heating of the injector. Both issues are mitigated by increasing the injector‐sample distance, leading to an 86% reduction in pressure variability on the sample surface and a 200 °C reduction in precursor temperature. The resulting hBN films exhibit no nanocrystalline islands, improved thickness homogeneity, and high crystalline quality (Raman FWHM = 23 cm−1). This is competitive with hBN films grown on other non‐metal substrates but achieved at lower temperature and with a low thickness of only a few nanometers. KW - Boron Nitride KW - 2D material Y1 - 2025 U6 - https://doi.org/10.1002/admi.202400467 SN - 2196-7350 VL - 12 IS - 1 PB - Wiley ER - TY - GEN A1 - Morales, Carlos A1 - Gertig, Max A1 - Kot, Małgorzata A1 - Alvarado, Carlos A1 - Schubert, Markus Andreas A1 - Zoellner, Marvin Hartwig A1 - Wenger, Christian A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - In situ X‐ray photoelectron spectroscopy study of atomic layer deposited cerium oxide on SiO₂ : substrate influence on the reaction mechanism during the early stages of growth T2 - Advanced materials interfaces N2 - Thermal atomic layer deposition (ALD) of cerium oxide using commercial Ce(thd)4 precursor and O3 on SiO2 substrates is studied employing in‐situ X‐ray photoelectron spectroscopy (XPS). The system presents a complex growth behavior determined by the change in the reaction mechanism when the precursor interacts with the substrate or the cerium oxide surface. During the first growth stage, non‐ALD side reactions promoted by the substrate affect the growth per cycle, the amount of carbon residue on the surface, and the oxidation degree of cerium oxide. On the contrary, the second growth stage is characterized by a constant growth per cycle in good agreement with the literature, low carbon residues, and almost fully oxidized cerium oxide films. This distinction between two growth regimes is not unique to the CeOx/SiO2 system but can be generalized to other metal oxide substrates. Furthermore, the film growth deviates from the ideal layer‐by‐layer mode, forming micrometric inhomogeneous and defective flakes that eventually coalesce for deposit thicknesses above 10 nm. The ALD‐cerium oxide films present less order and a higher density of defects than films grown by physical vapor deposition techniques, likely affecting their reactivity in oxidizing and reducing conditions. KW - Atomic Layer Deposition (ALD) KW - Cerium oxide KW - In-situ X-ray Photoelectron spectroscopy (in-situ XPS) KW - Growth model KW - Substrate influence Y1 - 2025 U6 - https://doi.org/10.1002/admi.202400537 SN - 2196-7350 VL - 12 IS - 5 SP - 1 EP - 13 PB - Wiley CY - Weinheim ER -