TY - GEN A1 - Lange, Felix A1 - Ernst, Owen C. A1 - Teubner, Thomas A1 - Richter, Carsten A1 - Schmidbauer, Martin A1 - Skibitzki, Oliver A1 - Schroeder, Thomas A1 - Schmidt, Peer A1 - Boeck, Torsten T1 - In-plane growth of germanium nanowires on nanostructured Si(001)/SiO2 substrates T2 - Nano Futures N2 - Germanium (Ge) nanowires (NWs) were grown in-plane on nano-structured Si(001)/SiO2 substrates by molecular beam epitaxy using gold (Au) as the solvent. The site-selective NW growth was enabled by a rectangular array of gold droplets on silicon (Si) tips with an Au nuclei density below 0.25 μm−2 on the surrounding silicon oxide (SiO2). The initial growth of Ge NWs starting from Si–Au droplets with SixGe1−x nucleation from ternary alloy is discussed from a thermodynamic point of view. The in-plane NW elongation occurred within ⟨110⟩ directions on the substrate and NWs were mainly bounded by two 55◦ inclined 111 facets and a less pronounced planar (001) top facet. Fully relaxed crystal lattices of Ge NWs were observed from two-dimensional reciprocal space maps of x-ray diffraction measurements. KW - Crystal growth KW - Silicon KW - Germanium KW - Phase diagram Y1 - 2020 UR - https://iopscience.iop.org/article/10.1088/2399-1984/ab82a0 U6 - https://doi.org/10.1088/2399-1984/ab82a0 SN - 2399-1984 VL - 4 IS - 3 SP - 1 EP - 8 ER - TY - GEN A1 - Jahn, Stephan F. A1 - Blaudeck, Thomas A1 - Baumann, Reinhard R. A1 - Jakob, Alexander A1 - Ecorchard, Petra A1 - Rüffer, Tobias A1 - Lang, Heinrich A1 - Schmidt, Peer T1 - Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands T2 - Chemistry of Materials N2 - The chemical and physical properties of [AgO2C(CH2OCH2)3H] (3) and its use as an aqueous, ligand-free MOD ink (MOD = metal−organic decomposition) for piezo inkjet printing is discussed. The printed, thermal, or photochemical sintered silver features are electrically conductive on glass (2.7 × 107 S m−1) and PET (PET = polyethylene terephthalate) substrates (1.1 × 107 S m−1) corresponding to 43% and 18% of the bulk silver conductivity. Conducted tape tests show the suitability of the ink for particularly polymer substrates. TG-MS studies demonstrate a two-step decomposition for the conversion of 3 to elemental silver. The structure of 3 in the solid state was determined by single X-ray structure determination. Y1 - 2010 UR - http://pubs.acs.org/doi/abs/10.1021/cm9036428 U6 - https://doi.org/10.1021/cm9036428 SN - 1520-5002 VL - 22 IS - 10 SP - 3067 EP - 3071 ER - TY - GEN A1 - Müller, Carola J. A1 - Schwarz, Ulrich A1 - Schmidt, Peer A1 - Schnelle, Walter A1 - Doert, Thomas T1 - High-Pressure Synthesis, Crystal Structure, and Properties of GdS2 with Thermodynamic Investigations in the Phase Diagram Gd-S, T2 - Zeitschrift für anorganische und allgemeine Chemie N2 - Gadolinium disulfide was prepared by high-pressure synthesis at 8 GPa and 1173 K. It crystallizes in the monoclinic space group P121/a1 (No. 14) with lattice parameters a = 7.879(1) Å; b = 3.936(1) Å, c = 7.926(1) Å and β = 90.08(1)°. The crystal structure is a twofold superstructure of the aristotype ZrSSi and consists of puckered cationic [GdS]+ double slabs that are sandwiched by planar sulfur sheets containing S22– dumbbells. The thermal decomposition of GdS2 proceeds via the sulfur-deficient polysulfides GdS1.9, GdS1.85 and GdS1.77 and eventually results in the sesquisulfide Gd2S3. GdS2 is a paramagnetic semiconductor which orders antiferromagnetically at TN = 7.7(1) K. A metamagnetic transition is observed in the magnetically ordered state. KW - Polysulfides KW - Gadolinium KW - High-pressure synthesis KW - X-ray diffraction KW - Phase diagrams Y1 - 2010 UR - http://onlinelibrary.wiley.com/doi/10.1002/zaac.201000015/full U6 - https://doi.org/10.1002/zaac.201000015 SN - 1521-3749 VL - 636 IS - 6 SP - 947 EP - 953 ER - TY - GEN A1 - Jahn, Stephan F. A1 - Jakob, Alexander A1 - Blaudeck, Thomas A1 - Schmidt, Peer A1 - Lang, Heinrich A1 - Baumann, Reinhard R. T1 - Inkjet printing of conductive patterns with an aqueous solution of [AgO2C(CH2OCH2)3H] without any additional stabilizing ligands T2 - Thin Solid Films N2 - The use of silver(I)-2-[2-(2-methoxyethoxy)ethoxy]acetate, [AgO2C(CH2OCH2)3H], and its application as an aqueous metal-organic decomposition (MOD) inkjet ink is reported. The chemical and physical properties of the silver carboxylate and the ink formulated thereof are discussed. The ink meets all requirements of piezo driven inkjet printing. The printed features were converted into electrically conducting silver patterns by thermal or photo-thermal treatment. The conversion of [AgO2C(CH2OCH2)3H] to elemental silver follows a two-step decomposition as demonstrated by thermogravimetry–mass spectrometry (TG–MS) measurements. The measured conductivities of the printed features on glass and polyethylene-terephthalate (PET) are 2.7 × 107 S m−1 and 1.1 × 107 S m−1, respectively, which correspond to 43% (glass) and 18% (PET) of the bulk silver conductivity. KW - Inkjet printing KW - Silver KW - Carboxylate KW - Ethyleneglycol KW - Flexible electronics Y1 - 2010 UR - http://www.sciencedirect.com/science/article/pii/S0040609010000866 U6 - https://doi.org/10.1016/j.tsf.2010.01.030 SN - 0040-6090 VL - 518 IS - 12 SP - 3218 EP - 3222 ER - TY - GEN A1 - Zeugner, Alexander A1 - Kaiser, Martin A1 - Schmidt, Peer A1 - Menshchikova, Tatiana V. A1 - Rusinov, Igor P. A1 - Markelov, Anton V. A1 - Van den Broek, Wouter A1 - Chulkov, Evgueni V. A1 - Doert, Thomas A1 - Ruck, Michael A1 - Isaeva, Anna T1 - Modular Design with 2D Topological-Insulator Building Blocks: Optimized Synthesis and Crystal Growth and Crystal and Electronic Structures of BiₓTeI (x = 2, 3) T2 - Chemistry of Materials N2 - Structural engineering of topological bulk materials is systematically explored with regard to the incorporation of the buckled bismuth layer [Bi₂], which is a 2D topological insulator per se, into the layered BiTeI host structure. The previously known bismuth telluride iodides, BiTeI and Bi₂TeI, offer physical properties relevant for spintronics. Herewith a new cousin, Bi₃TeI (sp.gr. R3m, a = 440.12(2) pm, c = 3223.1(2) pm), joins the ranks and expands this structural family. Bi₃TeI = [Bi₂][BiTeI] represents a stack with strictly alternating building blocks. Conditions for reproducible synthesis and crystal-growth of Bi₂TeI and Bi₃TeI are ascertained, thus yielding platelet-like crystals on the millimeter size scale and enabling direct measurements. The crystal structures of Bi₂TeI and Bi₃TeI are examined by X-ray diffraction and electron microscopy. DFT calculations predict metallic properties of Bi₃TeI and an unconventional surface state residing on various surface terminations. This state emerges as a result of complex hybridization of atomic states due to their strong intermixing. Our study does not support the existence of new stacking variants BiₓTeI with x > 3; instead, it indicates a possible homogeneity range of Bi₃TeI. The series BiTeI–Bi₂TeI–Bi₃TeI illustrates the influence of structural modifications on topological properties. KW - Crytal growth KW - Topological insulator KW - Crystal structure KW - Electronic structure KW - Bismuth layered compounds Y1 - 2017 UR - http://pubs.acs.org/doi/abs/10.1021/acs.chemmater.6b05038 U6 - https://doi.org/10.1021/acs.chemmater.6b05038 SN - 0897-4756 SN - 1520-5002 VL - 29 IS - 3 SP - 1321 EP - 1337 ER - TY - GEN A1 - Wolf, Adrian A1 - Doert, Thomas A1 - Stolze, Karoline A1 - Schmidt, Peer T1 - Modeling of Chemical Vapor Transport of Uranium Phosphide Telluride UPTe T2 - Zeitschrift für Anorganische und Allgemeine Chemie N2 - The crystallization mechanism of uranium phosphide telluride UPTe by chemical vapor transport reaction [1] is presented based on thermodynamic modelling using TRAGMIN program. Evaluation of standard data of all expected species was performed by modeling of the binary phase diagrams U/Te and U/P. Data of UPTe were deduced from known phosphide tellurides[2,3]. Identifying the viable composition area within the quaternary system U/P/Te/I the temperature depending transport equilibria could be obtained. KW - Crystal growth KW - Chemical vapor transport KW - Chalogenides KW - Thermodynamic modeling Y1 - 2014 UR - http://onlinelibrary.wiley.com/doi/10.1002/zaac.201490026/full U6 - https://doi.org/10.1002/zaac.201490026 SN - 1521-3749 VL - 640 IS - 11 SP - 2374 ER - TY - GEN A1 - Efimova, Anastasia A1 - Varga, Janos A1 - Matuschek, Georg A1 - Saraji-Bozorgzad, Mohammad R. A1 - Denner, Thomas A1 - Zimmermann, Ralf A1 - Schmidt, Peer T1 - Thermal Resilience of Imidazolium-Based Ionic Liquids—Studies on Short- and Long-Term Thermal Stability and Decomposition Mechanism of 1-Alkyl-3-methylimidazolium Halides by Thermal Analysis and Single-Photon Ionization Time-of-Flight Mass Spectrometry T2 - Journal of Physical Chemistry B N2 - Ionic liquids are often considered as green alternatives of volatile organic solvents. The thermal behavior of the ionic liquids is relevant for a number of emerging large-scale applications at elevated temperature. Knowledge about the degradation products is indispensable for treatment and recycling of the used ionic liquids. The objective of this paper was an investigation of the short- and long-term stability of several 1-alkyl-3-methylimidazolium halides, determination of the degradation products, and the elucidation of their decomposition patterns and structure–stability relations. Short-term stability and mechanism of thermal degradation were investigated by a self-developed, innovative thermal analysis single-photon ionization time-of-flight mass spectrometry device with Skimmer coupling. The applied technology provides real-time monitoring of the forming species and allows tracing their change during the course of the decomposition. Therein, the almost fragment-free soft ionization with vacuum ultraviolet photons plays a crucial role. We have detected unfragmented molecules whose formation was only assumed by electron ionization. Nevertheless, the main decomposition products of the selected ionic liquids were alkyl imidazoles, alkenes, alkyl halides, and hydrogen halides. From the decomposition products, we have deduced the fragmentation patterns and discussed their interrelation with the length of the alkyl chain and the type of the halide anion. Our results did not suggest the evaporation of the investigated ionic liquids prior to their decomposition under atmospheric conditions. Long-term thermal stability and applicability were determined based on thermogravimetric analysis evaluated with a kinetic model. Thus, the time-dependent maximum operation temperature (MOT) for the respective ionic liquids has been calculated. As a rule, the short-term stability overestimates the long-term decomposition temperatures; the calculated MOT are significantly lower (at least 100 K) than the standardly obtained decomposition temperatures. KW - Ionic liquid KW - Thermal analysis KW - Thermal decomposition KW - Maximum operation temperature Y1 - 2018 U6 - https://doi.org/10.1021/acs.jpcb.8b06416 VL - 122 IS - 37 SP - 8738 EP - 8749 ER - TY - GEN A1 - Poddig, Hagen A1 - Donath, Tom A1 - Gebauer, Paul A1 - Finzel, Kati A1 - Kohout, Miroslav A1 - Wu, Yuandong A1 - Schmidt, Peer A1 - Doert, Thomas T1 - Rare Earth Metal Polytellurides RETe1.8 (RE = Gd, Tb, Dy) – Directed Synthesis, Crystal and Electronic Structures, and Bonding Features T2 - Zeitschrift für Anorganische und Allgemeine Chemie N2 - Single crystals of the polytellurides RETe1.8 of gadolinium, terbium, and dysprosium were prepared by chemical vapor transport and alkali metal halide flux reactions. To determine proper synthesis conditions for the desired target composition, the binary phase diagram Gd-Te was evaluated by CalPhaD methods. The compounds are isostructural to SmTe1.8 and crystallize in space group P4/n (no. 85) with lattice parameters of a = 966.10(4), 960.00(3), and 957.33(2) pm and c = 1794.15(10), 1785.77(6), and 1779.38(5) pm for GdTe1.8, TbTe1.8 and DyTe1.8, respectively. The structures consist of puckered [RETe] double slabs and planar telluride layers composed of Te2 dumbbells and linear Te3 units in accordance with ELI-D based bonding analyses. The latter can be understood as a Te3(4–) anion. GdTe1.8 is a semiconductor with a bandgap of 0.19 eV/0.17 eV (experimental / calculated). Magnetization data confirm trivalent RE ions and indicate antiferromagnetic order at T(N) = 12 K for TbTe1.8 and T(N) = 9.8 K for DyTe1.8, whereas GdTe1.8 remains paramagnetic down to 2 K. KW - Phase diagrams KW - Crystal structure KW - Crystal growth KW - Chemical vapor transport KW - Thermodynamc modelling KW - Chalcogenides KW - Polytellurides KW - Bonding analysis Y1 - 2018 UR - https://onlinelibrary.wiley.com/doi/10.1002/zaac.201800382 U6 - https://doi.org/10.1002/zaac.201800382 SN - 1521-3749 SN - 0044-2313 VL - 644 IS - 24 SP - 1886 EP - 1896 ER - TY - GEN A1 - Grönke, Martin A1 - Arrozi, Ubed S. F. A1 - Bronkalla, Nadine A1 - Schmidt, Peer A1 - Valldor, Martin A1 - Oswald, Steffen A1 - Woodcock, Thomas G. A1 - Eckert, Victoria A1 - Hao, Qi A1 - Plüschke, Laura A1 - Lederer, Albena A1 - Nielsch, Kornelius A1 - Büchner, Bernd A1 - Kaskel, Stefan A1 - Hampel, Silke T1 - Layered α-TiCl₃: Microsheets on YSZ Substrates for Ethylene Polymerization with Enhanced Activity T2 - Chemistry of Materials N2 - The transition metal halide α-titanium(III) chloride (α-TiCl₃) is a layered two-dimensional compound and a well-established Ziegler–Natta catalyst for the polymerization of ethylene. A new synthesis technique is used to obtain thin sheets of α-TiCl₃ that show exceptional physical properties in contrast to their bulk counterparts, due to an enlarged surface-to-volume ratio. Chemical vapor transport (CVT) of α-titanium(III) chloride directly on substrates results in microsheets that exhibit an improved catalytic effect. For rational planning of synthesis conditions, thermodynamic simulations of occurring gas-phase equilibria were performed. Based on these calculation results, crystal growth was achieved by adding GaCl₃via pure short term CVT in a temperature gradient of 700–600 K on yttrium-stabilized zirconia (YSZ) substrates. Phase pure, as-grown, single crystal sheets with high crystallinity and a thickness of around 4 μm were obtained. These thin sheets of α-TiCl₃ on YSZ substrates were implemented as catalysts for the ethylene polymerization reaction. A significant improvement of catalytic activity of 16% was achieved, probably due to an increased surface-to-volume ratio. As a highlight, the as-grown microsheets were exfoliated subsequently to a thickness lower than 200 nm and an even higher catalytic activity of up to 24% was confirmed experimentally due to delamination effects. This is the first time that an improved catalytic effect of α-TiCl₃ is observed as a result of downscaling from bulk to microsheets by CVT. KW - Crystal growth KW - Chemical vapor transport KW - Thermodynamic modeling KW - 2D layered compounds KW - Halides KW - Nanocrystals (1) Y1 - 2019 UR - https://pubs.acs.org/doi/10.1021/acs.chemmater.9b01818 U6 - https://doi.org/10.1021/acs.chemmater.9b01818 VL - 31 IS - 14 SP - 5305 EP - 5313 ER - TY - GEN A1 - Ehrling, Sebastian A1 - Senkovska, Irena A1 - Efimova, Anastasia A1 - Bon, Volodymyr A1 - Abylgazina, Leila A1 - Petkov, Petko A1 - Evans, Jack D. A1 - Attallah, Ahmed Gamal A1 - Wharmby, Michael Thomas A1 - Roslova, Maria A1 - Huang, Zhehao A1 - Tanaka, Hideki A1 - Wagner, Andreas A1 - Schmidt, Peer A1 - Kaskel, Stefan T1 - Temperature Driven Transformation of the Flexible Metal-Organic Framework DUT-8(Ni) T2 - Chemistry - a European journal N2 - DUT-8(Ni) metal-organic framework belongs to the family of flexible pillared layer materials. The desolvated framework can be obtained in the open pore form (op) or in the closed pore form (cp), depending on the crystal size regime. In the present work, we report on the behaviour of desolvated DUT-8(Ni) at elevated temperatures. For both, op and cp variants, heating causes a structural transition, leading to an new, crystalline compound, containing two interpenetrated networks. The state of the framework before transition (op vs. cp) influences the transition temperature: the small particles of the op phase transform at significantly lower temperature in comparison to the macroparticles of the cp phase, transforming close to the decomposition temperature. The new compound, confined closed pore phase (ccp), was characterized by powder X-ray diffraction and spectroscopic techniques, such as IR, EXAFS, and positron annihilation lifetime spectroscopy (PALS). Thermal effects of structural cp to ccp transitions were studied using differential scanning calorimetry (DSC), showing an overall exothermic effect of the process, involving bond breaking and reformation. Theoretical calculations reveal the energetics, driving the observed temperature induced phase transition. KW - Metal organic framework (MOF) KW - Thermal analysis KW - Crystal structure KW - Phase transition Y1 - 2022 UR - https://chemistry-europe.onlinelibrary.wiley.com/doi/10.1002/chem.202201281 U6 - https://doi.org/10.1002/chem.202201281 SN - 1521-3765 VL - 28 IS - 55 SP - 1 EP - 10 ER - TY - GEN A1 - Böhler, Stefan A1 - Rosencrantz, Sophia A1 - Wolf, Karina A1 - Heinemann, Robert A1 - Schmidt, Peer A1 - Ganster, Johannes A1 - Büsse, Thomas A1 - Balko, Jens A1 - Rosencrantz, Ruben R. T1 - Active protease formulation in commodity polymers withstands melt processing into compounds and blown films T2 - Materials Today Communications N2 - Integrating enzymes into thermoplastic polymers is challenging due to their lack of robustness with respect to temperature and shear fields during conventional melt processing. In the present study, blown films from low-density polyethylene (LDPE) were prepared containing a technical protease from Bacillus sp. First, LDPE/protease compounds were produced followed by blown film extrusion, both processes at melt mass temperatures of 130 °C or higher. Enzyme activity was proven, both for the LDPE/protease compound and the blown film. The highest enzyme activity in the compound was determined for processing at 132 °C and a screw speed of 75 rpm. The influence of melt temperature and shear fields was studied in detail. Enzyme activities were determined for melt temperatures up to 160 °C and for screw speeds ranging from 75 to 300 rpm during compounding by twin-screw extrusion. The process was also applied for biobased and biodegradable polyesters, where similar protease activity after compounding was verified. Electron microscopy, X-ray diffraction, nuclear magnetic resonance spectroscopy and differential scanning calorimetry served to analyze components and morphology of the enzyme formulation used here. It is proposed that the porous morphology of the protease particles is beneficial for the enzyme to remain active after processing. Additionally, the polymer matrix surrounding the particles protects the protease at elevated temperatures, which can be attributed to thermal insulation. Thus, the right combination of a suited technical enzyme formulation with appropriate mild melt compounding conditions allows enzymes to be incorporated into thermoplastics and retain their activity. This opens the way to use the abundant biological functions of enzymes in thermoplastic applications. KW - Thermal analysis KW - X-ray diffraction KW - Crystal structure Y1 - 2023 UR - https://www.sciencedirect.com/science/article/pii/S2352492822018591 U6 - https://doi.org/10.1016/j.mtcomm.2022.105018 SN - 2352-4928 VL - 34 SP - 1 EP - 9 ER -