TY - GEN A1 - Yfantis, Alexandros D. A1 - Tzalas, B. A1 - Lambrakopoulos, S. A1 - Anagnostaki, E. A1 - Schmeißer, Dieter T1 - New chrome free, environmentally friendly methods in chemical processes N2 - It gives an overview of the research work to develop chrom-free methods in different chemical processes. A new class of materials, the conductive polymers, have been studied extensively for their anticorrosion properties. KW - Alloys KW - Polypyrrole KW - Polymers Y1 - 2002 ER - TY - GEN A1 - Lewerenz, Hans-Joachim A1 - Murrell, Chris A1 - Jakubowicz, J. A1 - Aggour, Mohammed A1 - Kanis, M. A1 - Campbell, S. A. A1 - Cox, P. A. A1 - Hoffmann, Patrick A1 - Jungblut, H. A1 - Schmeißer, Dieter T1 - High Resolution Surface analysis of Si Roughenning in Dilute Ammonium Fluoride Solution T2 - Journal of Electroanalytical Chemistry N2 - The initial stages of porous Si formation on Si(111) in dilute ammonium fluoride solution are analysed by photoelectron spectroscopy using synchrotron radiation (SRPES). The PES results in the por-Si formation regime partly support a recent dissolution model. The contribution from the Si 2p surface core level shift shows that 0.35 ML of the surface is still H-terminated after interruption of the conditioning process at the first photocurrent maximum. Two signals shifted in binding energy by 0.8 and 1 eV, respectively, are attributed to reaction intermediates expected from the proposed reaction mechanism and from theoretical calculations using density functional theory (DFT). A distinct roughening is found in in-situ AFM measurements, with a calculated RMS roughness parameter of 2.6 nm. KW - Porous Si KW - transistors KW - Electropolishing KW - Photoelectron spectroscopy KW - AFM KW - Synchrotron radiation Y1 - 2003 SN - 1873-2569 VL - 540 SP - 3 EP - 6 ER - TY - GEN A1 - Appel, Günter A1 - Ade, H. A1 - Gürek, A. G. A1 - Stadler, S. A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter T1 - Orientation studies of Si-Phthalocyanines sulfonic acids cast on SiOx substrates T2 - Applied Physics / A N2 - Layers of dihydroxy silicon phthalocyanine tetrasulfonic acid and oligo-7-oxo silicon phthalocyanine tetrasulfonic acid were prepared by solution-casting methods. The purity of the material was checked by X-ray photoemission spectroscopy. The orientation of the molecules in respect to the substrate plane was investigated by angle-dependent near-edge X-ray absorption fine-structure spectroscopy. The morphology was characterized by atomic force microscopy. Most samples exhibited a significant orientation that was accompanied by crystalline structures; others had no orientation at all with a dominant amorphous morphology. This behavior indicates that several preparation parameters affect the crystallinity and the orientation of the phthalocyanines. Y1 - 2003 U6 - https://doi.org/10.1007/s003390201320 SN - 1432-0630 VL - 76 IS - 2 SP - 177 EP - 182 ER - TY - GEN A1 - Müller, Klaus A1 - Goryachko, Andriy A1 - Burkov, Yevgen A1 - Schwiertz, Carola A1 - Ratzke, Markus A1 - Köble, J. A1 - Reif, Jürgen A1 - Schmeißer, Dieter T1 - Scanning Kelvin Probe Microscopy and Photoemission electron microscopy of organic source-drain structures T2 - Synthetic Metals N2 - n order to optimize organic field effect transistors (OFETs), the characterisation of active-layer surfaces in terms of their roughness, chemical composition and distribution of surface potentials is important. We report on high-resolution microscopic mapping of organic source-drain structures with P3HT as the semiconductor by scanning Kelvin probe microscopy (SKPM) and photoemission electron microscopy (PEEM). It was shown that PEEM is able to characterise the surface morphology (roughness), the chemical homogeneity and the composition of organic structures. The two-dimensional mapping of surface potentials by SKPM with applied source-drain voltages is shown to be an important ingredient of OFETs failure mode analysis. KW - Photoemission electron microscopy (PEEM) KW - Scanning Kelvin probe microscopy (SKPM) KW - OFET Y1 - 2004 SN - 0379-6779 VL - 146 IS - 3 SP - 377 EP - 382 ER - TY - GEN A1 - Müssig, Hans-Joachim A1 - Dabrowski, Jarek Marek A1 - Wenger, Christian A1 - Lupina, Grzegorz A1 - Sorge, Roland A1 - Formanek, Peter A1 - Zaumseil, Peter A1 - Schmeißer, Dieter T1 - Ultrathin Dielectric Films Grown by Solid Phase Reaction of Pr with SiO2 T2 - MRS Proceedings Y1 - 2004 SN - 1946-4274 VL - 811 ER - TY - GEN A1 - Schmeißer, Dieter A1 - Müssig, Hans-Joachim T1 - Pr4f occupancy and VB/CB band offsets of Pr2O3 at the interface to Si(001) and SiC(0001) surfaces T2 - MRS Proceedings Y1 - 2004 SN - 1946-4274 VL - 811 ER - TY - JOUR A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter A1 - Soinski, M. S. T1 - Promieniowanie synchrotronowe jako uniwersalne narzedzie badawcze - Proby jego wykorzystania w badaniach struktury zeliwa Y1 - 2004 ER - TY - GEN A1 - Yfantis, Alexandros D. A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter ED - Kainer, Karl Ulrich T1 - Corrosion Protection by Conductive Polymers for Magnesium Alloys T2 - Magnesium, proceedings of the 6th International Conference on Magnesium Alloys and their Applications, November 2003 in Wolfsburg N2 - In this work, we present the experimental data related to the effect of the polypyrrole concentration and the film thickness on the corrosion inhibition properties of these novel polymer coatings. The relative corrosion resistance properties of the films formed from the matrix solutions, where polypyrrole was in situ polymerized and in cases where polypyrrole is dispersed in a form of powder (pigment) in the polyaclylic polymer, are further examined. The evaluation of the experimental data provides significant evidence regarding the mechanism of corrosion inhibition, as well as the optimization of the synthesis and application conditions. KW - corrosion protection KW - conductive polymers for magnesium alloys KW - polypyrrole Y1 - 2004 SN - 3-527-30975-6 SP - 605 EP - 610 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Sidorenko, Alexander A1 - Tokarev, Igor A1 - Krenek, Radim A1 - Burkov, Yevgen A1 - Schmeißer, Dieter A1 - Minko, S. A1 - Stamm, Manfred ED - Champion, Yannick ED - Fecht, Hans-Jörg T1 - Generation of Nanostructured Materials from Thin Films of Block Copolymer Assembles T2 - Nano-architectured and manostructured materials, fabrication, control and properties, EUROMAT 2003 Y1 - 2004 SN - 3-527-31008-8 SP - 143 EP - 150 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Tokarev, Igor A1 - Krenek, Radim A1 - Burkov, Yevgen A1 - Schmeißer, Dieter A1 - Sidorenko, Alexander A1 - Minko, Sergiy A1 - Stamm, Manfred T1 - Microphase separation in thin films of poly(styrene-block-4-vinylpyridine) Copolymer-2-(4-Hydroxybenzeneazo) benzoic Acid Assembly T2 - Macromolecules N2 - The fine structure of thin films of poly(styrene-block-4-vinylpyridine) copolymer-2-(4'-hydroxybenzeneazo)benzoic acid (PS-PVP+HABA) assembly has been studied using the combination of atomic force microscopy, ellipsometry, X-ray reflectivity, GISAXS, XPS, and XPEEM. The films consist of cylindrical nanodomains formed by PVP+HABA associates surrounded by PS matrix. Alignment of the domains can be switched upon exposure to vapors of different solvents from the parallel to perpendicular orientation and vice versa with respect to the surface plane. Swelling in 1,4-dioxane leads the system from the cylindrical to the spherical morphology. Solvent evaporation results in a shrinkage of the matrix in the vertical direction and subsequent merging of the spheres into the perpendicularly aligned cylinders. The cylinders form a regular hexagonal lattice with a spatial period of 25.5 nm. On the other hand, vapors of chloroform induce in-plane alignment. The films consist of parallel layers of the cylinders separated by PS matrix and demonstrate the fingerprint-like structure. The nanocylinders of PVP+HABA are packed into a distorted hexagonal lattice exhibiting 31 nm in plane and 17 nm vertical periodicity. In both cases a thin wetting layer is found at the polymer-substrate interface. The free surface is enriched with PS. Y1 - 2005 SN - 1520-5835 VL - 38 IS - 2 SP - 507 EP - 516 ER - TY - CHAP A1 - Henkel, Karsten A1 - Schwiertz, Carola A1 - Wagner, S. A1 - Valdeig, A. A1 - List, M. A1 - Schmeißer, Dieter T1 - Partikel- und Tropfendetektion im Mikrometerbereich mittels Schwingquarzen Y1 - 2003 SN - 3-935712-92-8 SP - 291 EP - 294 PB - w.e.b.-Univ.-Verl. CY - Dresden ER - TY - GEN A1 - Lamprakopoulos, Stelios A1 - Schmeißer, Dieter A1 - Anastassopoulou, Jane A1 - Theophanides, Theophile A1 - Yfantis, Alexandros D. T1 - An FTIR study of the role of H2O and D2O in the aging mechanism of conductive polypyrroles T2 - Synthetic Metals N2 - In the present work the role of H2O was studied by conductivity measurements and FTIR spectroscopy using the isotopic effect of deuterium in order to elucidate the aging mechanism of conductivity of polypyrroles. Polypyrrole was prepared with PTS as a dopant, by using deuterated water. Conductivity measurements showed changes due to structural water and atmospheric humidity. The FTIR absorption spectra indicated that the most probable structure of polypyrrole is the two-dimensional one. This finding could be attributed to the inhibition of polypyrrole's IR modes. The infrared spectrum analysis show that the gamma -NH bending mode of pyrrole has significantly changed after polymerization of pyrrole and this result is in accordance with XPS measurements. KW - Polypyrrole KW - Conductivity KW - FTIR KW - Isotopic effect Y1 - 2004 U6 - https://doi.org/10.1016/j.synthmet.2004.03.006 SN - 0379-6779 VL - 144 IS - 3 SP - 229 EP - 234 ER - TY - JOUR A1 - Schmeißer, Dieter T1 - Pr2O3/Si(001) interface reactions and stability N2 - We show that an interfacial silicate is formed in a natural way between Si(0 0 1) and the deposited Pr2O3 film if a sufficient amount of oxygen is provided during deposition, as during electron beam evaporation from Pr6O11 source. We provide arguments from results of ab initio calculations and we present a ternary phase diagram of the Pr-O-Si system obtained for epitaxial films from non-destructive depth profiling data acquired by synchrotron radiation and photoelectron spectroscopy (SR-PES) at the undulator beam line U49/2-PGM2. The composition of the interfacial layer is (Pr2O3)(SiO)x(SiO2)y, with x+y between 2 and 6 and depends on the growth condition and distance from the substrate. No interfacial SiO2 and no interfacial silicide is formed during growth. The ternary phase diagram indicates that this non-stoichiometric pseudobinary alloy is stable on Si up to high temperatures, without phase separation into Pr2O3 and SiO2. Therefore, a complete re-engineering of the CMOS process may be not necessary. KW - High-k-material KW - Pr2O3/Si(0 0 1) interface KW - Photoelectron spectroscopy KW - Ab initio calculations KW - CMOS Y1 - 2004 ER - TY - GEN A1 - Sidorenko, Alexander A1 - Tokarev, Igor A1 - Krenek, Radim A1 - Burkov, Yevgen A1 - Schmeißer, Dieter A1 - Stamm, Manfred T1 - XPEEM investigations of 2D hierachical array of Ni nanorods using block copolymer templates Y1 - 2004 ER - TY - JOUR A1 - Schmeißer, Dieter T1 - Cooper minimum observed for the Pr5s and Pr5p states in Pr2O3 Y1 - 2004 ER -