TY - GEN A1 - Amirli, Samir A1 - Fritzsche, Pascal A1 - Abbasov, Ilgar A1 - Wichmann, Steffen A1 - Simon, Sylvio A1 - Amirov, Fariz A1 - Mammadov, Arastun T1 - The İmpact of High Speed Mechanical Processing Efficiency on the Production Process T1 - Влияние высокоскоростной механической обработки на производственный процесс T2 - HERALD of the Azerbaijan Engineering Academy N2 - The main purpose of the article is to increase productivitiy, reduce processing time and the same time increase the cutting speed. The results are also displayed in Excel using a number of cutting parameters. For this purpose, the article shows the results of both high-speed milling and high-speed turning of a machine with different types of tools, as well as processing of one tool on different types of machines. Unlike other machines, in general, the work on the machines of universal processing centers turned out to be more productive. The feed rate of the machine tools is the focus area here. If we increase cutting values, then the tool life is reduced and that leads to higher tool costs. With universal high-performance machines we cannot save costs for tools (we can only save machine tool costs). Compared to universal high-performance machines, we can save tool costs with Universal Machining Center. Therefore, it is suggested to the machining with the universal machining center, although the machining time and cutting time is faster with the universal high-performance machine. N2 - В статье показаны результаты как высокоскоростной фрезерной, так и высокоскоростной токарной обработки станка с разными типами инструментов, а также обработки одного инструмента на разных типах станков. В отличие от других станков, работа на станках универсальных обрабатывающих центров оказалась более производительной. В центре внимания здесь скорости подачи станков. Если мы увеличиваем параметры резания, то срок службы инструмента снижается, что приводит к увеличению затрат на инструмент. С универсальными высокопроизводительными станками мы не можем сэкономить на инструментах (мы можем сэкономить только на станках). По сравнению с универсальными высокопроизводительными станками, мы можем сэкономить на инструментальных средствах с помощью универсального обрабатывающего центра. Поэтому рекомендуется выполнять обработку на универсальном обрабатывающем центре, хотя время обработки и время резки меньше на универсальном высокопроизводительном станке. KW - Energy efficiency KW - High speed mechanical processing KW - Production KW - Neseff Y1 - 2022 U6 - https://doi.org/10.52171/2076-0515_2022_14_01_41_51 SN - 2076-0515 SN - 2789-8245 VL - 14 IS - 1 SP - 41 EP - 51 ER - TY - GEN A1 - Amirov, Fariz A1 - Simon, Sylvio A1 - Wichmann, Steffen A1 - Amirli, Samir A1 - Fraňa, Karel T1 - Determining the Accuracy of Water Pressure Processing using 3D Scanning T1 - Определение точности измерений при обработке давлением воды с использованием 3D-сканирования T2 - HERALD of the Azerbaijan Engineering Academy N2 - The article provides the results of the study of manufacturing tolerances in waterjet cutting by the method of three-dimensional (3D) measurements: shape deviations were shown by three-dimensional comparison of scanned samples. The dimensions were also measured using two-dimensional (2D) sections of the scanned samples. It has been determined that the clean waterjet cutting tends to separate soft materials such as plastic, foil, foam or paper, as well as food. Unlike the pure waterjet cutting, the abrasive cutting is used for hard materials such as steel, ceramics, glass. The optimal pressure for material processing has been calculated. Particular emphasis is placed on the separation of composite materials, which cannot be satisfactorily accomplished using conventional methods. N2 - В статье приведены результаты исследования производственных допусков при водоструйной резке методом трехмерных (3D) измерений: отклонения формы были показаны путем трехмерного справнения отсканированных образцов. Размеры были измерены также с использованием двухмерных (2D) срезов отсканированных образцов. Определено, что чистая водоструйная резка имеет тенденцию отделять мягкие материалы, такие как пластмасса, фольга, пена или бумага, а также пища. В отличие от чистой водоструйной резки, абразивная резка используется для твердых материалов, таких как сталь, керамика, стекло. Вычислено оптимальное давление для обработки материалов. Особое значение уделено разделению композитных материалов, которое не может быть удовлетворительно осуществлено с использованием обычных методов. KW - 3D Scanning KW - Water Pressure Processing KW - Clean Waterjet Cutting KW - Measurement of Manufacturing Accuracy Y1 - 2021 UR - http://www.ama.com.az/category/journal/ SN - 2076-0515 SN - 2789-8245 VL - 13 IS - 3 SP - 38 EP - 44 ER - TY - GEN A1 - Simon, Sylvio A1 - Yusubov, Nizami A1 - Amirli, Samir ED - Simon, Sylvio ED - Amirov, Fariz ED - Namazov, Subhan T1 - Formation of Geometric Parameters of the Surfaces of Cylindrical Parts during Waterjet Cutting T2 - Machine Building and Energy: New Concepts and Technologies (MBENCT) N2 - The article is devoted to the study of the technological process of water jet cutting of cylindrical parts on CNC machines. The results of experimental data on determining the accuracy of dimensional deviation, surface roughness, and taper of cylindrical parts depending on the circular milling of a water jet during water jet cutting are presented. Y1 - 2023 UR - https://www.scientific.net/book/machine-building-and-energy-new-concepts-and-technologies-mbenct/978-3-0364-1034-0 SN - 978-0364-0034-1 SP - 59 EP - 64 PB - Trans Tech Publication Ltd. CY - Baech ER -