TY - GEN A1 - Zia, Waqas A1 - Malekshahi Byranvand, Mahdi A1 - Rudolph, Toby A1 - Rai, Monika A1 - Kot, Małgorzata A1 - Das, Chittaranjan A1 - Kedia, Mayank A1 - Zohdi, Mohammadreza A1 - Zuo, Weiwei A1 - Yeddu, Vishal A1 - Saidaminov, Makhsud I. A1 - Flege, Jan Ingo A1 - Kirchartz, Thomas A1 - Saliba, Michael T1 - MAPbCl3 Light Absorber for Highest Voltage Perovskite Solar Cells T2 - ACS Energy Letters N2 - Perovskite solar cells (PSCs) excel in achieving high open-circuit voltages (VOC) for narrow bandgaps (∼1.6 eV) but face challenges with wide-bandgap perovskites, like methylammonium lead trichloride (MAPbCl3) with a 3.03 eV bandgap. These materials are transparent in visible absorbing ultraviolet (UV) light. However, achieving uniform film crystallization remains a hurdle. Here, we enhance MAPbCl3 crystallization by manipulating annealing atmospheres (nitrogen, air, and MACl vapor). Excess MACl vapor improves surface coverage, which is crucial for film stability. We demonstrate that the microstructure of the perovskite film, including surface morphology, grain boundaries, and interfaces, can affect the photovoltaic properties. The subsequently obtained VOC of 1.78 V is the highest recorded for single-junction PSCs to the best of our knowledge. Surprisingly, the conventional hole-transport layer spiro-OMeTAD, optimized for narrow bandgaps, sustains such high voltages. Photoluminescence measurements reveal a trap-assisted recombination peak at 1.65 eV, indicating deep traps as significant to voltage loss in MAPbCl3. KW - Perovskite solar cells KW - methylammonium lead trichloride (MAPbCl3) KW - uniform film crystallization KW - manipulation of annealing atmospheres KW - trap-assisted recombination KW - microstructure Y1 - 2024 U6 - https://doi.org/10.1021/acsenergylett.3c02777 SN - 2380-8195 VL - 9 SP - 1017 EP - 1024 ER - TY - GEN A1 - Kodalle, Tim A1 - Malekshahi Byranvand, Mahdi A1 - Goudreau, Meredith A1 - Das, Chittaranjan A1 - Roy, Rajarshi A1 - Kot, Małgorzata A1 - Briesenick, Simon A1 - Zohdi, Mohammadreza A1 - Rai, Monika A1 - Tamura, Nobumichi A1 - Flege, Jan Ingo A1 - Hempel, Wolfram A1 - Sutter‐Fella, Carolin M. A1 - Saliba, Michael T1 - An integrated deposition and passivation strategy for controlled crystallization of 2D/3D Halide Perovskite films T2 - Advanced Materials N2 - This work introduces a simplified deposition procedure for multidimensional (2D/3D) perovskite thin films, integrating a phenethylammonium chloride (PEACl)‐treatment into the antisolvent step when forming the 3D perovskite. This simultaneous deposition and passivation strategy reduces the number of synthesis steps while simultaneously stabilizing the halide perovskite film and improving the photovoltaic performance of resulting solar cell devices to 20.8%. Using a combination of multimodal in situ and additional ex situ characterizations, it is demonstrated that the introduction of PEACl during the perovskite film formation slows down the crystal growth process, which leads to a larger average grain size and narrower grain size distribution, thus reducing carrier recombination at grain boundaries and improving the device's performance and stability. The data suggests that during annealing of the wet film, the PEACl diffuses to the surface of the film, forming hydrophobic (quasi‐)2D structures that protect the bulk of the perovskite film from humidity‐induced degradation. KW - 2D/3D perovskites KW - crystallization KW - in situ characterization KW - stability Y1 - 2024 U6 - https://doi.org/10.1002/adma.202309154 SN - 0935-9648 VL - 36 IS - 24 PB - Wiley CY - Weinheim ER - TY - GEN A1 - Kedia, Mayank A1 - Rai, Monika A1 - Phirke, Himanshu A1 - Aranda, Clara A. A1 - Das, Chittaranjan A1 - Chirvony, Vladimir A1 - Boehringer, Stephan A1 - Kot, Małgorzata A1 - Malekshahi Byranvand, Mahdi A1 - Flege, Jan Ingo A1 - Redinger, Alex A1 - Saliba, Michael T1 - Light Makes Right: Laser Polishing for Surface Modification of Perovskite Solar Cells T2 - ACS Energy Letters N2 - Interface engineering is a common strategy for passivating surface defects to attain open circuit voltages (Voc) in perovskite solar cells (PSCs). In this work, we introduce the concept of polishing a perovskite thin-film surface using a nanosecond (ns) pulsed ultraviolet laser to reduce surface defects, such as dangling bonds, undesirable phases, and suboptimal stoichiometry. A careful control of laser energy and scanning speed improves the photophysical properties of the surface without compromising the thickness. Using laser polishing, a Voc of 1.21 V is achieved for planar PSCs with a triple cation composition, showing an improved perovskite/hole transport interface by mitigating surface recombination losses. We measure an efficiency boost from 18.0% to 19.3% with improved stability of up to 1000 h. The results open the door to a new class of surface modification using lasers for interface passivation in well-controllable, automated, scalable, and solvent-free surface treatments. KW - Perovskite solar cells KW - laser polishing KW - perovskite/hole transport interface KW - surface defects KW - recombination losses Y1 - 2023 U6 - https://doi.org/10.1021/acsenergylett.3c00469 SN - 2380-8195 VL - 8 SP - 2603 EP - 2610 ER -