TY - GEN A1 - Limberg, Wolfgang A1 - Ebel, Thomas A1 - Pyczak, Florian A1 - Oehring, Michael A1 - Schimansky, Frank-Peter T1 - Influence of the sintering atmosphere on the mechanical properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C T2 - Materials Science and Engineering A Y1 - 2012 IS - 552 SP - 323 EP - 329 ER - TY - CHAP A1 - Bauer, Alexander A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias ED - Huron, Eric S. ED - Reed, Roger C. ED - Hardy, Mark C. ED - Mills, Michael J. ED - Montero, Rick E. ED - Portella, Pedro D. ED - Telesmann, Jack T1 - Creep strength and microstructure of polycrystalline γ’–strengthened cobalt-base superalloys T2 - Superalloys 2012, proceedings of the 12th International Symposium on Superalloys, held September 9-13, 2012 at Seven Springs Mountain Resort, Seven Springs, PA Y1 - 2012 SN - 978-1-118-51643-0 SN - 978-0-470-94320-5 SP - 695 EP - 703 PB - Wiley [u.a.] CY - Hoboken, New Jersey ER - TY - GEN A1 - Schloffer, Martin A1 - Iqbal, Farasat A1 - Gabrisch, Heike A1 - Schwaighofer, Emanuel A1 - Schimansky, Frank-Peter A1 - Mayer, Svea A1 - Stark, Andreas A1 - Lippmann, Thomas A1 - Göken, Mathias A1 - Pyczak, Florian A1 - Clemens, Helmut T1 - Microstructure development and hardness of a powder metallurgical multi phase gamma-TiAl based alloy T2 - Intermetallics Y1 - 2012 U6 - https://doi.org/10.1016/j.intermet.2011.11.015 SN - 0966-9795 IS - 22 SP - 231 EP - 240 ER - TY - GEN A1 - Wang, Li A1 - Pyczak, Florian A1 - Zhang, Jian A1 - Lou, Langhong A1 - Singer, Robert F. T1 - Effect of eutectics on plastic deformation and subsequent recrystallization in the single crystal nickel base superalloy CMSX-4 T2 - Materials Science and Engineering A Y1 - 2012 SN - 1873-4936 IS - 532 SP - 487 EP - 492 ER - TY - GEN A1 - Zhao, Dapeng A1 - Chang, Keke A1 - Ebel, Thomas A1 - Quian, M. A1 - Willumeit-Römer, Regine A1 - Yan, M. A1 - Pyczak, Florian T1 - Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding T2 - Powder Metallurgy Y1 - 2014 SN - 1743-2901 VL - 57 IS - 1 SP - 2 EP - 4 ER - TY - GEN A1 - Zhao, Dapeng A1 - Chang, Keke A1 - Ebel, Thomas A1 - Quian, M. A1 - Willumeit-Römer, Regine A1 - Yan, M. A1 - Pyczak, Florian T1 - Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material T2 - Journal of the Mechanical Behavior of Biomedical Materials Y1 - 2013 SN - 1878-0180 IS - 28 SP - 171 EP - 182 ER - TY - CHAP A1 - Stark, Andreas A1 - Schwaighofer, Emanuel A1 - Mayer, Svea A1 - Clemens, Helmut A1 - Lippmann, Thomas A1 - Lottermoser, Lars A1 - Schreyer, Andreas A1 - Pyczak, Florian T1 - In situ high-energy XRD study of the hot-deformation behavior of a novel γ-TiAl alloy T2 - Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A Y1 - 2013 U6 - https://doi.org/10.1557/opl.2012.1577 SP - 35 EP - 40 PB - Cambridge Univ. Press CY - Cambridge ER - TY - GEN A1 - Pyczak, Florian A1 - Bauer, A. A1 - Göken, Mathias A1 - Neumeier, Steffen A1 - Lorenz, U. A1 - Oehring, Michael A1 - Schell, N. A1 - Schreyer, Andreas A1 - Stark, Andreas A1 - Szymanzik, F. T1 - Plastic Deformation Mechanisms in a Crept L12 hardened Co-Base Superalloy T2 - Materials Science and Engineering A Y1 - 2013 SN - 1873-4936 IS - 571 SP - 13 EP - 18 ER - TY - GEN A1 - Weidner, Anja A1 - Pyczak, Florian A1 - Biermann, H. T1 - Scanning and transmission electron microscopy investigations of defect arrangements in a two-phase gamma-TiAl alloy T2 - Materials Science and Engineering A Y1 - 2013 SN - 1873-4936 IS - 571 SP - 49 EP - 56 ER - TY - CHAP A1 - Hauschildt, Katja A1 - Stark, Andreas A1 - Lorenz, Uwe A1 - Schell, Norbert A1 - Fischer, Torben A1 - Blankenburg, Malte A1 - Müller, Martin A1 - Pyczak, Florian T1 - Diffusion brazing of γ-TiAl-alloys: Investigations of the joint by electron microscopy and high-energy X-ray diffraction T2 - Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A Y1 - 2013 U6 - https://doi.org/10.1557/opl.2012.1750 SP - 215 EP - 220 PB - Cambridge Univ. Press CY - Cambridge ER - TY - GEN A1 - Gabrisch, Heike A1 - Stark, Andreas A1 - Schimansky, Frank-Peter A1 - Wang, Li A1 - Schell, Norbert A1 - Pyczak, Florian T1 - Carbides in Ti-45Al-5Nb alloys with different carbon contents T2 - Intermetallics Y1 - 2013 SN - 0966-9795 IS - 33 SP - 44 EP - 53 ER - TY - CHAP A1 - Gabrisch, Heike A1 - Lorenz, Uwe A1 - Oehring, Michael A1 - Paul, Jonathan A1 - Pyczak, Florian A1 - Rackel, Marcus W. A1 - Schimansky, Frank-Peter A1 - Stark, Andreas T1 - TiAlNb-alloy with a modulated B19 containing constituent produced by powder metallurgy T2 - Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A Y1 - 2013 U6 - https://doi.org/10.1557/opl.2012.1575 SP - 35 EP - 40 PB - Cambridge Univ. Press CY - Cambridge ER - TY - GEN A1 - Ebel, Thomas A1 - Ferri, Orley Milagres A1 - Limberg, Wolfgang A1 - Oehring, Michael A1 - Pyczak, Florian A1 - Schimansky, Frank-Peter T1 - Metal injection moulding of titanium and titanium-aluminides T2 - Key Engineering Materials Y1 - 2012 SN - 1662-9795 IS - 520 SP - 153 EP - 160 ER - TY - GEN A1 - Kainer, Karl Ulrich A1 - Ebel, Thomas A1 - Ferri, Orley Milagres A1 - Limberg, Wolfgang A1 - Pyczak, Florian A1 - Schimansky, Frank-Peter T1 - From titanium to magnesium: processing by advanced metal injection moulding T2 - Powder Metallurgy Y1 - 2012 VL - 55 IS - 4 SP - 315 EP - 321 ER - TY - GEN A1 - Larráyoz Izcara, Xabier A1 - Blank, Aharon A1 - Pyczak, Florian A1 - Staron, Peter A1 - Schumann, Sandor A1 - Huber, Norbert T1 - Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu)aluminum alloys T2 - Materials Science and Engineering A Y1 - 2014 SN - 1873-4936 IS - 610 SP - 46 EP - 53 ER - TY - GEN A1 - Imayev, V. A1 - Gaisin, R. A1 - Gaisina, E. A1 - Imayev, R. A1 - Hecht, H.-J. A1 - Pyczak, Florian T1 - Effect of hot forging on microstructure and tensile properties of Ti–TiB based composites produced by casting T2 - Materials Science and Engineering A Y1 - 2014 SN - 1873-4936 IS - 609 SP - 34 EP - 41 ER - TY - GEN A1 - Löber, Lukas A1 - Schimansky, Frank-Peter A1 - Kühn, Uta A1 - Pyczak, Florian A1 - Eckert, Jürgen T1 - Selective laser melting of a beta-solidifying TNMB1 titanium aluminide alloy T2 - Journal Materials Processing Technology Y1 - 2014 SN - 0924-0136 VL - 214 IS - 9 SP - 1852 EP - 1860 ER - TY - GEN A1 - Stark, Andreas A1 - Oehring, Michael A1 - Pyczak, Florian A1 - Lippmann, Thomas A1 - Lottermoser, Lars A1 - Schreyer, Andreas T1 - The transformation mechanism of β phase to ω-related phases in Nb-rich γ-TiAl alloys studied by in situ high-energy X-ray diffraction T2 - Materials Science Forum Y1 - 2014 SN - 1662-9752 IS - 772 SP - 85 EP - 89 ER - TY - GEN A1 - Jabbar, Houria A1 - Monchoux, Jean-Philippe A1 - Thomas, Marc A1 - Pyczak, Florian A1 - Couret, Alain T1 - Improvement of the creep properties of TiAl alloys densified by Spark Plasma Sintering T2 - Intermetallics Y1 - 2014 SN - 0966-9795 IS - 46 SP - 1 EP - 3 ER - TY - GEN A1 - Schloffer, Martin A1 - Schmoelzer, Thomas A1 - Mayer, Svea A1 - Schwaighofer, Emanuel A1 - Hawranek, G. A1 - Schimansky, Frank-Peter A1 - Pyczak, Florian A1 - Clemens, Helmut T1 - The Characterisation of a Powder Metallurgically Manufactured TNM™ Titanium Aluminide Alloy Using Complimentary Quantitative Methods T2 - Practical Metallography - Praktische Metallkunde Y1 - 2011 U6 - https://doi.org/10.3139/147.110138 SN - 0032-678x VL - 48 IS - 11 SP - 594 EP - 604 ER - TY - GEN A1 - Kaysser, Wolfgang A1 - Esslinger, Jörg A1 - Abetz, Volker A1 - Huber, Norbert A1 - Kainer, Karl Ulrich A1 - Klassen, Thomas A1 - Pyczak, Florian A1 - Schreyer, Andreas A1 - Staron, Peter T1 - Research with Neutron and Synchrotron Radiation on Aerospace and Automotive Materials and Components T2 - Advanced Engineering Materials Y1 - 2011 U6 - https://doi.org/10.1002/adem.201100150 SN - 1527-2648 VL - 13 IS - 8 SP - 637 EP - 657 ER - TY - GEN A1 - Staron, Peter A1 - Beckmann, Felix A1 - Lippmann, Thomas A1 - Stark, Andreas A1 - Oehring, Michael A1 - Pyczak, Florian A1 - Salgado, Mario A1 - Hort, Norbert A1 - Eckerlebe, Horst A1 - Kainer, Karl Ulrich A1 - Müller, Martin A1 - Schreyer, Andreas T1 - In situ studies of light metals with synchrotron radiation and neutrons T2 - Materials Science Forum Y1 - 2011 SN - 1662-9752 IS - 690 SP - 192 EP - 197 ER - TY - CHAP A1 - Stark, Andreas A1 - Oehring, Michael A1 - Pyczak, Florian ED - Palm, Martin ED - Bewlay, Bernard P. ED - Kumar, K. Sharvan ED - Yoshimi, Kyosuke T1 - Influence of Quenching Rates on the Transformation of Ternary Phases in Nb-rich γ-TiAl Alloys T2 - Intermetallic-based alloys for structural and functional applications, symposium held November 29 - December 3, Boston, Massachusetts, U.S.A Y1 - 2011 U6 - https://doi.org/doi:10.1557/opl.2011.30 SP - 107 EP - 112 PB - Cambridge Univ. Press CY - Cambridge ER - TY - GEN A1 - Pyczak, Florian A1 - Appel, Fritz A1 - Limberg, Wolfgang A1 - Lorenz, Uwe A1 - Oehring, Michael A1 - Paul, Jonathan A1 - Schimansky, Frank-Peter T1 - Novel Processing Techniques for gamma-TiAl Alloys T2 - Materials Science Forum Y1 - 2011 SN - 1662-9752 IS - 690 SP - 145 EP - 148 ER - TY - GEN A1 - Stark, Andreas A1 - Oehring, Michael A1 - Pyczak, Florian A1 - Schreyer, Andreas T1 - In Situ Observation of Various Phase Transformation Paths in Nb-Rich TiAl Alloys during Quenching with Different Rates T2 - Advanced Engineering Materials Y1 - 2011 SN - 1527-2648 VL - 18 IS - 8 SP - 700 EP - 704 ER - TY - GEN A1 - Neumeier, Steffen A1 - Dinkel, Michael A1 - Pyczak, Florian A1 - Göken, Mathias T1 - Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5 T2 - Materials Science and Engineering A Y1 - 2011 SN - 1873-4936 IS - 528 SP - 815 EP - 822 ER - TY - GEN A1 - Dinkel, Michael A1 - Pyczak, Florian A1 - May, Johannes A1 - Höppel, Heinz Werner A1 - Göken, Mathias T1 - XRD profile analysis characterization of ultrafine grained Al-Mg alloys T2 - Journal of Materials Science Y1 - 2008 SN - 1573-4803 VL - 43 IS - 23-24 SP - 7481 EP - 7487 ER - TY - GEN A1 - Bauer, A. A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias T1 - Microstructure and creep strength of different γ/γ'- strengthened Co-base superalloy variants T2 - Scripta Materialia Y1 - 2010 SN - 1359-6462 VL - 63 IS - 12 SP - 1197 EP - 1200 ER - TY - CHAP A1 - Löhnert, K. A1 - Pyczak, Florian ED - Ott, E. A. ED - Groh, E. R. ED - Banik, A. ED - Dempster, I. ED - Gabb, Timothy P. ED - Helmink, R. ED - Liu, X. ED - Mitchell, A. ED - Sjöberg, G. P. ED - Wusatowska-Sarnek, A. T1 - Microstructure evolution in the Nickel base superalloy Allvac®718Plus™ T2 - Superalloy 718 and derivatives, proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, held October 10 - 13, 2010, Pittsburgh, PA Y1 - 2010 SN - 978-1-61782-770-9 SP - 877 EP - 891 PB - Wiley CY - Boston [u.a.] ER - TY - GEN A1 - Jabbar, Houria A1 - Monchoux, Jean-Philippe A1 - Houdellier, Florent A1 - Dollé, Mickaël A1 - Schimansky, Frank-Peter A1 - Pyczak, Florian A1 - Thomas, Marc A1 - Couret, Alain T1 - Microstructure and mechanical properties of high niobium containing TiAl alloys elaborated by Spark Plasma Sintering T2 - Intermetallics Y1 - 2010 SN - 0966-9795 VL - 18 IS - 12 SP - 2312 EP - 2321 ER - TY - GEN A1 - Weidner, Anja A1 - Amberger, Dorothea A1 - Pyczak, Florian A1 - Schönbauer, Bernd A1 - Stanzl-Tschegg, Stefanie A1 - Mughrabi, Hael T1 - Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold T2 - International Journal of Fatigue Y1 - 2010 SN - 0142-1123 VL - 32 IS - 6 SP - 872 EP - 878 ER - TY - CHAP A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias ED - Reed, Roger C. ED - Green, Kenneth A. ED - Caron, Pierre ED - Gabb, Timothy P. ED - Fahrmann, Michael G. ED - Huron, Eric S. ED - Woodard, Shiela R. T1 - The Influence of Ruthenium and Rhenium on the local Properties of the gamma- and gamma'-Phase in Nickel-Base Superalloys and their Consequences for Alloy Behaviour T2 - Superalloys 2008, proceedings of the Eleventh International Symposium on Superalloys, held September 14 - 18, 2008, Pennsylvania, USA Y1 - 2008 SN - 978-0-87339-728-5 SP - 109 EP - 119 PB - TMS CY - Warrendale, Pa. ER - TY - GEN A1 - Dinkel, Michael A1 - Heinz, Paul A1 - Pyczak, Florian A1 - Volek, Andreas A1 - Ott, Michael A1 - Affeldt, Ernst A1 - Vossberg, Andreas A1 - Göken, Mathias A1 - Singer, Robert F. ED - Reed, Roger C. ED - Green, Kenneth A. ED - Caron, Pierre ED - Gabb, Timothy P. ED - Fahrmann, Michael G. ED - Huron, Eric S. ED - Woodard, Shiela R. T1 - New Boron and Silicon Free Single Crystal-Diffusion Brazing Alloys T2 - Superalloys 2008, proceedings of the Eleventh International Symposium on Superalloys, held September 14 - 18, 2008, Pennsylvania, USA Y1 - 2008 SN - 978-0-87339-728-5 SP - 211 EP - 220 PB - TMS CY - Warrendale, Pa. ER - TY - CHAP A1 - Heinz, Paul A1 - Volek, Andreas A1 - Singer, Robert F. A1 - Dinkel, Michael A1 - Pyczak, Florian A1 - Göken, Mathias A1 - Ott, Michael A1 - Affeldt, Ernst A1 - Vossberg, Andreas ED - Öchsner, Andreas ED - Murch, Graeme E. T1 - Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys T2 - Diffusion in Solids and Liquids III, 3rd International Conference on Diffusion in Solids and Liquids, Liege Konferenz Y1 - 2008 SN - 978-3-908451-51-8 SP - 294 EP - 299 PB - Trans Tech Publ. CY - Stafa-Zurich [u.a.] ER - TY - GEN A1 - Lu, Z. A1 - Pyczak, Florian A1 - Biermann, H. A1 - Mughrabi, Hael T1 - CBED study of local strain distribution in gamma and gamma' phases of a crept Ni base superalloy T2 - Acta Metallurgica Sinica - Chinese edition Y1 - 2006 VL - 42 IS - 7 SP - 694 EP - 698 ER - TY - CHAP A1 - Dinkel, Michael A1 - Pyczak, Florian A1 - Göken, Mathias A1 - Heinz, Paul A1 - Volek, Andreas A1 - Singer, Robert F. A1 - Ott, Michael A1 - Affeldt, Ernst A1 - Vossberg, Andreas ED - Lecomte-Beckers, Jacqueline ED - Carton, M. ED - Schubert, F. ED - Ennis, P. J. T1 - Nanoindentation and Orientation Measurements in Single Crystalline Brazing Joints of Nickel-Base Superalloys T2 - Materials for advanced power engineering 2006, proceedings of the 8th Liege Conference, Bd. 2 Y1 - 2006 SN - 3-89336-436-6 SP - 633 EP - 642 PB - Forschungszentrum CY - Jülich ER - TY - GEN A1 - Pyczak, Florian A1 - Devrient, B. A1 - Neuner, F. C. A1 - Mughrabi, Hael T1 - The influence of different alloying elements on the development of the gamma/gamma' microstructure of nickel-base superalloys during high-temperature annealing and deformation T2 - Acta Materialia Y1 - 2005 SN - 1359-6454 VL - 53 IS - 14 SP - 3879 EP - 3891 ER - TY - GEN A1 - Volek, Andreas A1 - Pyczak, Florian A1 - Singer, Robert F. A1 - Mughrabi, Hael T1 - Partitioning of Re between gamma and gamma' phase in nickel-base superalloys T2 - Scripta Materialia Y1 - 2005 VL - 52 IS - 2 SP - 141 EP - 145 ER - TY - CHAP A1 - Bürgel, R. A1 - Grossmann, J. A1 - Lüsebrink, O. A1 - Mughrabi, Hael A1 - Pyczak, Florian A1 - Singer, Robert F. A1 - Volek, Andreas ED - Green, Kenneth A. ED - Harada, H. ED - Howson, T. E. ED - Pollock, Tresa M. ED - Reed, Roger C. ED - Schirra, J. J. ED - Walston, S. T1 - Development of a New Alloy for Directional Solidification of Large Industrial Gas Turbine Blades T2 - Superalloys 2004, proceedings of the Tenth International Symposium on Superalloys, held September 19 - 23, 2004 at the Seven Springs Mountain Resort in Champion, Pennsylvania Y1 - 2004 SN - 0-87339-576-x SP - 25 EP - 34 PB - TMS CY - Warrendale, Pa. ER - TY - CHAP A1 - Pyczak, Florian A1 - Devrient, B. A1 - Mughrabi, Hael ED - Green, Kenneth A. ED - Harada, H. ED - Howson, T. E. ED - Pollock, Tresa M. ED - Reed, Roger C. ED - Schirra, J. J. ED - Walston, S. T1 - The Effects of Different Alloying Elements on the Thermal Expansion Coefficients, Lattice Constants and Misfit of Nickel-Based Superalloys Investigated by X-Ray Diffraction T2 - Superalloys 2004, proceedings of the Tenth International Symposium on Superalloys, held September 19 - 23, 2004, Pennsylvania Y1 - 2004 SP - 827 EP - 836 PB - TMS CY - Warrendale, Pa. ER - TY - GEN A1 - Lu, Zheng A1 - Pyczak, Florian A1 - Krämer, S. A1 - Biermann, H. A1 - Mughrabi, Hael T1 - Fast and reliable evaluation of lattice distortions from convergent-beam electron diffraction patterns T2 - The philosophical magazine Y1 - 2003 SN - 1478-6443 VL - 83 IS - 20 SP - 2383 EP - 2397 ER - TY - GEN A1 - Lu, Z. A1 - Pyczak, Florian A1 - Biermann, H. A1 - Mughrabi, Hael T1 - Measurement of local elastic strains in the single-crystal nickel-based superalloy CMSX-6 by convergent-beam electron diffraction T2 - Philosophical Magazine A Y1 - 2002 VL - 82 IS - 6 SP - 1219 EP - 1234 ER - TY - CHAP A1 - Durst, K. A1 - Pyczak, Florian A1 - Biermann, H. A1 - Göken, Mathias A1 - Mughrabi, Hael A1 - Vehoff, H. T1 - Microstructural and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigations T2 - Proceedings, Materials Week 2002 Y1 - 2002 SN - 3-88355-314-X PB - Werkstoffinformationsgesellschaft mbH CY - Frankfurt am Main ER - TY - GEN A1 - Großmann, Berthold von A1 - Biermann, H. A1 - Tetzlaff, Ulrich A1 - Pyczak, Florian A1 - Mughrabi, Hael T1 - Measurement of the local elastic strains in Aged Monocrystalline Nickel Base Superalloys by CBED T2 - Scripta Materialia Y1 - 2000 SN - 1359-6462 VL - 43 IS - 9 SP - 859 EP - 864 ER - TY - CHAP A1 - Pyczak, Florian A1 - Biermann, H. A1 - Mughrabi, Hael A1 - Volek, Andreas A1 - Singer, Robert F. ED - Pollock, Tresa M. ED - Kissinger, R. D. ED - Bowman, R. R. ED - Green, Kenneth A. ED - McLean, M. ED - Olson, S. L. ED - Schirra, J. J. T1 - CBED Measurement of Residual Internal Strains in the Neighbourhood of TCP Phases in Ni-Base Superalloys T2 - Superalloys 2000, proceedings of the Ninth International Symposium on Superalloys, held September 17 - 21, 2000, Seven Springs, PA Y1 - 2000 SN - 0-87339-477-1 SP - 367 EP - 377 PB - The Minerals, Metals & Materials Society, CY - Warrendale, Pa. ER - TY - CHAP A1 - Pyczak, Florian A1 - Mughrabi, Hael ED - Morris, David G. ED - Naka, S. ED - Caron, Pierre T1 - Overview of MD-Number Calculations as a Tool for Phase Stability Prediction in Ni-Base Superalloys T2 - Intermetallics and superalloys, Proceedings of EUROMAT 99, vol. 10 Y1 - 2000 SN - 3-527-30192-5 SP - 46 EP - 51 PB - Wiley-VCH CY - Weinheim [u.a.] ER - TY - CHAP A1 - Pyczak, Florian A1 - Mughrabi, Hael ED - Morris, David G. ED - Naka, S. ED - Caron, Pierre T1 - CBED Measurement of Residual Internal Strains in the Neighbourhood of TCP Phases in Ni-Base Superalloys T2 - Intermetallics and superalloys, Proceedings of EUROMAT 99, vol. 10 Y1 - 2000 SN - 3-527-30192-5 SP - 91 EP - 95 PB - Wiley-VCH CY - Weinheim [u.a.] ER - TY - GEN A1 - Pyczak, Florian A1 - Neumeier, Steffen A1 - Göken, Mathias T1 - Temperature Dependence of Element Partitioning in Rhenium and Ruthenium Bearing Nickel-Base Superalloys T2 - Materials Science and Engineering A Y1 - 2010 SN - 1873-4936 IS - 527 SP - 7939 EP - 7943 ER - TY - GEN A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias T1 - Influence of Rhenium and Ruthenium on Local Mechanical Properties of Nickel-Base Superalloys T2 - Philosophical Magazine A Y1 - 2011 SN - 1478-6443 VL - 91 IS - 33 SP - 4187 EP - 4199 ER - TY - GEN A1 - Gebhard, Susanne A1 - Pyczak, Florian A1 - Göken, Mathias T1 - Microstructural and Micromechanical Characterisation of TiAl Alloys Using Atomic Force Microscopy and Nanoindentation T2 - Materials Science and Engineering A Y1 - 2010 SN - 1873-4936 IS - 523 SP - 235 EP - 241 ER - TY - GEN A1 - Wang, Li A1 - Pyczak, Florian A1 - Zhang, Jian A1 - Singer, Robert F. T1 - On the role of eutectics during recrystallization in a single crystal nickel-base superalloy - CMSX-4 T2 - International Journal of Materials Research Y1 - 2009 SN - 2195-8556 VL - 100 IS - 8 SP - 1046 EP - 1051 ER - TY - GEN A1 - Pyczak, Florian A1 - Neumeier, Steffen A1 - Göken, Mathias T1 - Change of Internal Stress and Strain States in Nickel-Base Superalloys during Creep Deformation T2 - Materials Science and Engineering A Y1 - 2009 SN - 1873-4936 IS - 510-511 SP - 295 EP - 300 ER - TY - GEN A1 - Rettig, Ralf A1 - Heckl, Astrid A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias A1 - Singer, Robert F. T1 - Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys T2 - Defect and Diffusion Forum Y1 - 2009 SN - 1662-9507 IS - 289-292 SP - 101 EP - 108 ER - TY - GEN A1 - Bolz, Sebastian A1 - Oehring, Michael A1 - Lindemann, Janny A1 - Pyczak, Florian A1 - Paul, Jonathan A1 - Stark, Andreas A1 - Lippmann, Thomas A1 - Roth-Fagaraseanu, Dan A1 - Schreyer, Andreas A1 - Weiß, Sabine A1 - Schrüfer, Susanne T1 - Microstructure and mechanical properties of a forged beta-solidifying gamma TiAl alloy in different heat treatment conditions T2 - Intermetallics Y1 - 2015 VL - 2015 IS - 58 SP - 71 EP - 83 ER - TY - GEN A1 - Pyczak, Florian A1 - Bauer, Alexander A1 - Göken, Mathias A1 - Lorenz, Uwe A1 - Neumeier, Steffen A1 - Oehring, Michael A1 - Paul, Jonathan A1 - Schell, Norbert A1 - Schreyer, Andreas A1 - Symanzik, Felix T1 - The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys T2 - Journal of Alloys and Compounds Y1 - 2015 SN - 0925-8388 IS - 632 SP - 110 EP - 115 ER - TY - GEN A1 - Salih, M. Z. A1 - Uhlarz, M. A1 - Pyczak, Florian A1 - Brokmeier, Heinz Günter A1 - Weidenfeller, Bernd A1 - Al-hamdany, N. A1 - Zhong, Z. A1 - Schell, N. A1 - Gan, Weimin T1 - The effect of magnetic annealing on crystallographic texture and microstructure of Fe-2.6% Si T2 - Journal of Magnetism and Magnetic Materials Y1 - 2015 U6 - https://doi.org/10.1016/j.jmmm.2015.01.004 SN - 0304-8853 IS - 381 SP - 350 EP - 359 ER - TY - GEN A1 - Wang, Zhi A1 - Prashanth, Konda G. A1 - Chaubey, Anil K. A1 - Löber, Lukas A1 - Schimansky, Frank-Peter A1 - Pyczak, Florian A1 - Zhang, W. W. A1 - Scudino, Sergio A1 - Eckert, Jürgen T1 - Tensile properties of Al–12Si matrix composites reinforced with Ti–Al-based particles T2 - Journal of Alloys and Compounds Y1 - 2015 SN - 0925-8388 IS - 630 SP - 256 EP - 259 ER - TY - GEN A1 - Oehring, Michael A1 - Lindemann, Janny A1 - Pyczak, Florian A1 - Paul, Jonathan A1 - Stark, Andreas A1 - Lippmann, Thomas A1 - Schrüfer, Susanne A1 - Roth-Fagaraseanu, Dan A1 - Schreyer, Andreas A1 - Weiß, Sabine T1 - Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions T2 - Intermetallics N2 - In the cast condition g titanium aluminide alloys that solidify completely through the b phase are characterized by fine and homogeneous microstructures, weak textures and low segregation. For these reasons such alloys have a relatively good workability and can be closed-die forged without preceding ingot breakdown even if the alloys contain no large fractions of the b phase at the working temperature. The present work was devoted to a combined study of the constitution and microstructural morphologies that develop in various two-step heat treatments of a single-step forged b solidifying alloy. The study included high-energy X-ray diffraction for in situ investigations of the constitution at the heat treatment temperature. It was observed that the phase ransformations are quite sluggish in the material which results in fine microstructures and some conditions that significantly deviate from thermodynamic equilibrium. Further, tensile and creep testing was carried out on the different material conditions in order to identify the range in which the properties can be varied. It is found that this easily forgeable material exhibits comparable strength, ductility and creep strength as more conventional peritectically solidifying alloys. KW - TiAl KW - Titanium Aluminides KW - hot die forging KW - TNB-V4 Y1 - 2015 UR - http://www.sciencedirect.com/science/article/pii/S096697951400301X U6 - https://doi.org/10.1016/j.intermet.2014.11.008 SN - 0966-9795 VL - 2015 IS - 58 SP - 71 EP - 83 ER - TY - GEN A1 - Bauer, Alexander A1 - Neumeier, Steffen A1 - Pyczak, Florian A1 - Göken, Mathias T1 - Influence of Iridium on the Properties of γ′-Strengthened Co-Base Superalloys T2 - Advanced Engineering Materials Y1 - 2015 SN - 1527-2648 VL - 17 IS - 6 SP - 748 EP - 754 ER - TY - CHAP A1 - Wang, Li A1 - Pyczak, Florian A1 - Gabrisch, Heike A1 - Lorenz, Uwe A1 - Münch, Mathias A1 - Schimansky, Frank-Peter A1 - Schreyer, Andreas A1 - Stark, Andreas T1 - Effects of Carbon Content, Annealing Condition and Internal Defects on the nucleation, growth and coarsening of P-type Carbides in High Niobium Containing TiAl Alloys T2 - Advanced structural and functional intermetallic-based alloys, November 30 - December 5, 2014, Boston, Massachusetts, USA Y1 - 2015 SN - 978-1-5108-0634-4 SP - 61 EP - 66 PB - Curran CY - Red Hook, NY ER - TY - CHAP A1 - Rackel, Marcus W. A1 - Stark, Andreas A1 - Gabrisch, Heike A1 - Schimansky, Frank-Peter A1 - Schell, Norbert A1 - Schreyer, Andreas A1 - Pyczak, Florian T1 - In situ synchrotron radiation measurements of orthorhombic phase formation in an advanced TiAl alloy with modulated microstructure T2 - Advanced structural and functional intermetallic-based alloys, November 30 - December 5, 2014, Boston, Massachusetts, USA Y1 - 2015 SN - 978-1-5108-0634-4 SP - 120 EP - 126 PB - Curran CY - Red Hook, NY ER - TY - GEN A1 - Zhao, Dapeng A1 - Chang, Keke A1 - Ebel, Thomas A1 - Nie, Hermin A1 - Willumeit-Römer, Regine A1 - Pyczak, Florian T1 - Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial T2 - Journal of Alloys and Compounds Y1 - 2015 SN - 0925-8388 VL - 640 SP - 393 EP - 400 ER - TY - GEN A1 - Wang, Li A1 - Gabrisch, Heike A1 - Lorenz, Uwe A1 - Schimansky, Frank-Peter A1 - Schreyer, Andreas A1 - Stark, Andreas A1 - Pyczak, Florian T1 - Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys T2 - Intermetallics Y1 - 2015 U6 - https://doi.org/10.1016/j.intermet.2015.07.001 SN - 0966-9795 VL - 66 SP - 111 EP - 119 ER - TY - GEN A1 - Soyama, Juliano A1 - Oehring, Michael A1 - Limberg, Wolfgang A1 - Ebel, Thomas A1 - Kainer, Karl Ulrich A1 - Pyczak, Florian T1 - The effect of zirconium addition on sintering behaviour, microstructure and creep resistance of the powder metallurgy processed alloy Ti-45Al-5Nb-0.2B-0.2C T2 - Materials and Design Y1 - 2015 SN - 0261-3069 VL - 84 SP - 87 EP - 94 ER - TY - GEN A1 - Soyama, Juliano A1 - Oehring, Michael A1 - Limberg, Wolfgang A1 - Ebel, Thomas A1 - Kainer, Karl Ulrich A1 - Pyczak, Florian T1 - Sintering behaviour of Ti–45Al–5Nb–0.2B–0.2C alloy modifications by additions of elemental titanium and aluminium T2 - Powder Metallurgy Y1 - 2015 SN - 1743-2901 VL - 58 IS - 5 SP - 369 EP - 375 ER - TY - GEN A1 - Stark, Andreas A1 - Rackel, Marcus W. A1 - Tchouaha Tankoua, Aristide A1 - Oehring, Michael A1 - Schell, Norbert A1 - Lottermoser, Lars A1 - Schreyer, Andreas A1 - Pyczak, Florian T1 - In situ High-Energy X-Ray Diffraction during Hot-Forming of a Multiphase TiAl Alloy T2 - Metals Y1 - 2015 SN - 2075-4701 VL - 5 IS - 4 SP - 2252 EP - 2265 ER - TY - CHAP A1 - Pyczak, Florian A1 - Rackel, Marcus W. A1 - Gabrisch, Heike A1 - Halici, Dalic A1 - Lorenz, Uwe A1 - Schreyer, Andreas A1 - Stark, Andreas T1 - In-situ monitoring of thermal treatments and hot deformation of a y-TiAl alloy by high energy X-ray diffraction T2 - Proceedings of the 1st International Conference on Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering (123HiMAT-2015), June 29 - July 3, 2015, Sapporo, Japan Y1 - 2015 SN - 978-4-9908874-0-7 SP - 323 EP - 326 PB - The 123rd Committee of Japan Society for the Promotion of Science, IAI CY - Tokyo ER - TY - GEN A1 - Prashanth, Konda G. A1 - Scudino, Sergio A1 - Chaubey, Anil K. A1 - Löber, Lukas A1 - Wang, Pei A1 - Attar, Hooyar A1 - Schimansky, Frank-Peter A1 - Pyczak, Florian A1 - Eckert, Jürgen T1 - Processing of Al-12Si – TNM composites by selective laser melting and evaluation of compressive and wear properties T2 - Journal of Materials Research Y1 - 2016 U6 - https://doi.org/10.1557/jmr.2015.326 SN - 0884-2914 SN - 2044-5326 VL - 31 IS - 1 SP - 55 EP - 65 ER - TY - GEN A1 - Kolb, M. A1 - Wheeler, Jeffrey M. A1 - Mathur, H. N. A1 - Neumeier, Steffen A1 - Korte-Kerzel, Sandra A1 - Pyczak, Florian A1 - Michler, Johann A1 - Göken, Mathias T1 - Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures T2 - Materials Science and Engineering A Y1 - 2016 U6 - https://doi.org/10.1016/j.msea.2016.04.026 SN - 0921-5093 VL - 665 SP - 135 EP - 140 ER - TY - GEN A1 - Rackel, Marcus W. A1 - Stark, Andreas A1 - Gabrisch, Heike A1 - Schell, Norbert A1 - Schreyer, Andreas A1 - Pyczak, Florian T1 - Orthorhombic phase formation in a Nb-rich γ-TiAl based alloy – an in situ synchrotron radiation investigation T2 - Acta Materialia Y1 - 2016 U6 - https://doi.org/10.1016/j.actamat.2016.09.030 SN - 1359-6454 VL - 121 SP - 343 EP - 351 ER - TY - GEN A1 - Laipple, Daniel A1 - Stark, Andreas A1 - Schimansky, Frank-Peter A1 - Schwebke, Bernd A1 - Pyczak, Florian A1 - Schreyer, Andreas T1 - Microstructure of Ti-45Al-5Nb and Ti-45Al-10Nb powders T2 - Key Engineering Materials Y1 - 2016 U6 - https://doi.org/10.4028/www.scientific.net/KEM.704.214 SN - 1662-9795 VL - 704 SP - 214 EP - 222 ER - TY - GEN A1 - Amherd Hidalgo, Alexandra A1 - Ebel, Thomas A1 - Limberg, Wolfgang A1 - Pyczak, Florian T1 - Influence of oxygen on the fatigue behaviour of Ti-6Al-7Nb alloy T2 - Key Engineering Materials Y1 - 2016 U6 - https://doi.org/10.4028/www.scientific.net/KEM.704.44 SN - 1662-9795 VL - 704 SP - 44 EP - 52 ER - TY - GEN A1 - Tchouaha Tankoua, Aristide A1 - Stark, Andreas A1 - Rackel, Marcus W. A1 - Pyczak, Florian A1 - Hehl, Axel von T1 - In situ analysis of the forging process of a novel γ-TiAl alloy using synchrotron radiation T2 - Materialwissenschaft und Werkstofftechnik Y1 - 2016 U6 - https://doi.org/10.1002/mawe.201600635 SN - 1521-4052 VL - 47 IS - 11 SP - 1109 EP - 1120 ER - TY - GEN A1 - Luo, Xia A1 - Ebel, Thomas A1 - Pyczak, Florian A1 - Limberg, Wolfgang A1 - Lin, Yuanhua T1 - Carbides evolution of Ti-22Nb based alloys prepared by Metal Injection Molding and the Reduction Methods T2 - Materials Letters Y1 - 2017 SN - 1873-4979 SN - 0167-577X VL - 193 SP - 295 EP - 298 ER - TY - GEN A1 - Guimaraes, R. P. M. A1 - Soyama, Juliano A1 - Ebel, Thomas A1 - Fredel, Márcio C. A1 - Pyczak, Florian T1 - Influence of α-Phase Field Heat Treatment on the Tensile and Primary Creep Resistance of a Powder Metallurgical Processed Ti-45Al-5Nb-0.2B-0.2C Titanium Aluminide Alloy T2 - Materials Science Forum Y1 - 2017 SN - 0255-5476 VL - 899 SP - 418 EP - 423 ER - TY - GEN A1 - Wang, Li A1 - Lorenz, Uwe A1 - Münch, Mathias A1 - Stark, Andreas A1 - Pyczak, Florian T1 - Influence of alloy composition and thermal history on carbide precipitation in γ-based TiAl alloys T2 - Intermetallics Y1 - 2017 SN - 0966-9795 VL - 89 SP - 32 EP - 39 ER - TY - GEN A1 - Gabrisch, Heike A1 - Lorenz, Uwe A1 - Pyczak, Florian A1 - Rackel, Marcus W. A1 - Stark, Andreas T1 - Morphology and stability of orthorhombic and hexagonal phases in a lamellar γ-Ti-42Al-8.5Nb alloy-A transmission electron microscopy study T2 - Acta Materialia Y1 - 2017 SN - 1359-6454 VL - 135 SP - 304 EP - 313 ER - TY - GEN A1 - Amherd Hidalgo, Alexandra A1 - Frykholm, Robert A1 - Ebel, Thomas A1 - Pyczak, Florian T1 - Powder Metallurgy Strategies to Improve Properties and Processing of Titanium Alloys: A Review T2 - Advanced Engineering Materials Y1 - 2017 SN - 1527-2648 VL - 19 IS - 6 ER - TY - GEN A1 - Wang, Li A1 - Zenk, Carolin A1 - Stark, Andreas A1 - Felfer, Peter A1 - Gabrisch, Heike A1 - Göken, Mathias A1 - Lorenz, Uwe A1 - Pyczak, Florian T1 - Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys T2 - Acta Materialia Y1 - 2017 SN - 1359-6454 IS - 137 SP - 36 EP - 44 ER - TY - GEN A1 - Li, Yuzhi A1 - Pyczak, Florian A1 - Oehring, Michael A1 - Wang, Li A1 - Paul, Jonathan A1 - Lorenz, Uwe A1 - Yao, Zekun T1 - Thermal Stability of gamma' phase in long-term aged Co-Al-W alloys T2 - Journal of Alloys and Compounds Y1 - 2017 SN - 0925-8388 VL - 729 SP - 266 EP - 276 ER - TY - GEN A1 - Li, Yuzhi A1 - Pyczak, Florian A1 - Paul, Jonathan A1 - Oehring, Michael A1 - Lorenz, Uwe A1 - Yao, Zekun T1 - Microstructure evolution in L12 hardened Co-base superalloys during creep T2 - Journal of Materials Research Y1 - 2017 SN - 2044-5326 SN - 0884-2914 VL - 32 IS - 24 SP - 4522 EP - 4530 ER - TY - GEN A1 - Paul, Jonathan A1 - Oehring, Michael A1 - Appel, Fritz A1 - Pyczak, Florian T1 - Depth resolved near-surface residual stresses in γ-based TiAl before and after high-temperature exposure T2 - Intermetallics Y1 - 2017 SN - 0966-9795 VL - 84 SP - 103 EP - 111 ER - TY - GEN A1 - Iqbal, Farasat A1 - Pyczak, Florian A1 - Neumeier, Steffen A1 - Göken, Mathias T1 - Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy T2 - Materials Science and Engineering : A, Structural materials Y1 - 2017 SN - 0921-5093 SN - 1873-4936 VL - 689 SP - 11 EP - 16 ER - TY - GEN A1 - Kim, Young Min A1 - Mendis, Chamini A1 - Sasask, Taisuke A1 - Letzig, Dietmar A1 - Pyczak, Florian A1 - Hono, Kazuhiro A1 - Yi, Sangbong T1 - Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution T2 - Scripta Materialia Y1 - 2017 SN - 1359-6462 VL - 136 SP - 41 EP - 45 ER - TY - GEN A1 - Soyama, Juliano A1 - Oehring, Michael A1 - Ebel, Thomas A1 - Kainer, Karl Ulrich A1 - Pyczak, Florian T1 - Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Molding T2 - JOM : the journal of the Minerals, Metals & Materials Society Y1 - 2017 SN - 1047-4838 SN - 1543-1851 VL - 69 IS - 4 SP - 676 EP - 682 ER - TY - GEN A1 - Bambach, Markus A1 - Emdadi, Aliakbar A1 - Sizova, Irina A1 - Hecht, Ulrike A1 - Pyczak, Florian T1 - Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior T2 - Intermetallics Y1 - 2018 U6 - https://doi.org/10.1016/j.intermet.2018.07.004 SN - 0966-9795 VL - 101 SP - 44 EP - 55 ER - TY - GEN A1 - Kathöfer, Fabian A1 - Pyczak, Florian T1 - Effect of ternary elements on the eutectic temperature and microstructure in TiAl-x (x=Nb,Cr,Zr), MSE, Darmstadt, 2018 N2 - Titanium aluminides alloys (TiAl) based on the intermetallic γ-phase are widely recognized for their potential as aero engine components. This is due to their comparable service temperature and lower density than conventional metallic systems as for example Ni-base superalloys. For this reason, TiAl alloys are recently used in aircraft turbines as material for turbine blades. However, on the alloying development side almost exclusively the processing of cast or forged parts is state of art. Also, the forming of these alloys is still challenging and expensive, since the necessary forming temperatures between 1100 °C and 1250 °C bring currently available die materials to their limits. The present research is focused on the modification of TiAl-X (X being a ternary alloying element) alloy compositions to create a phase constitution that allows isothermal forming at lower temperatures. The underlying idea is to stabilize the unordered α-phase in the temperature regime between 1000 - 1100°C. It is expected that this unordered α-phase can be deformed more easily than ordered phases α2 and γ normally present in TiAl alloys. Based on the work of Kainuma et. al.[1] and thermodynamic calculations using Thermo-Calc software, different alloy composition - Ti – (38-43)Al – (1-7,5)[Nb,Cr,Zr] - were identified as promising for this concept. Therefore, samples were produced by arc melting and analyzed with respect to their phase transition temperature, microstructure and phase constitution. The results were compared to measurements done with the commercial used TiAl alloy TNM (Ti – 43, 5Al – 4Nb – 1Mo – 0,1B). [1] Kainuma, R, Fujita, Y. Mitsui, H., Ohnuma, I. and Ishida, K. (2000) Intermetallics, 8 KW - Titanium Aluminides KW - Material alloying KW - Phase Transformation KW - Microstructure Y1 - 2018 UR - https://www.mse-congress.de/program/poster-session SP - 1 ER - TY - GEN A1 - Amherd Hidalgo, Alexandra A1 - Limberg, Wolfgang A1 - Ebel, Thomas A1 - Frykholm, Robert A1 - Carreno-Morelli, Efrain A1 - Pyczak, Florian T1 - Influence of alloying elements in fatigue properties of α/β titanium alloys T2 - Key Engineering Materials Y1 - 2018 U6 - https://doi.org/10.4028/www.scientific.net/KEM.770.80 SN - 1662-9795 SN - 1013-9826 VL - 770 SP - 80 EP - 86 ER - TY - GEN A1 - Wang, Li A1 - Pyczak, Florian A1 - Paul, Jonathan A1 - Oehring, Michael A1 - Lorenz, Uwe A1 - Yao, Zekun A1 - Ning, Yongquan T1 - Rafting of γ′ precipitates in a Co-9Al-9W superalloy during compressive creep T2 - Materials Science and Engineering Y1 - 2018 U6 - https://doi.org/10.1016/j.msea.2018.02.017 SN - 0921-5093 VL - 719 SP - 43 EP - 48 ER - TY - GEN A1 - Zhao, Dapeng A1 - Chen, Yu-kai A1 - Chang, Keke A1 - Ebel, Thomas A1 - Luthringer, Bérengère A1 - Willumeit-Römer, Regine A1 - Pyczak, Florian T1 - Surface topography and cytocompatibility of metal injection molded Ti–22Nb alloy as biomaterial T2 - Transactions of Nonferrous Metals Society of China Y1 - 2018 U6 - https://doi.org/10.1016/S1003-6326(18)64772-7 SN - 1003-6326 VL - 28 IS - 7 SP - 1342 EP - 1350 ER - TY - GEN A1 - Lazurenko, Daria V. A1 - Bataev, Ivan A. A1 - Mali, Vyacheslav I. A1 - Jorge, J. R. A1 - Stark, Andreas A1 - Pyczak, Florian A1 - Ogneva, T. S. A1 - Maliutina, I. N. T1 - Synthesis of metal-intermetallic laminate (MIL) composites with modified Al3Ti structure and in situ synchrotron X-ray diffraction analysis of sintering process T2 - Materials and Design Y1 - 2018 U6 - https://doi.org/10.1016/j.matdes.2018.04.038 SN - 0264-1275 VL - 151 SP - 8 EP - 16 ER - TY - GEN A1 - Freund, Lisa P. A1 - Stark, Andreas A1 - Pyczak, Florian A1 - Schell, Norbert A1 - Göken, Mathias A1 - Neumeier, Steffen T1 - The grain boundary pinning effect of the µ phase in an advanced polycrystalline γ/γʹ Co-base superalloy T2 - Journal of Alloys and Compounds Y1 - 2018 U6 - https://doi.org/10.1016/j.jallcom.2018.04.204 SN - 0925-8388 VL - 753 SP - 333 EP - 342 ER - TY - GEN A1 - Freund, Lisa P. A1 - Stark, Andreas A1 - Kirchmayer, Andreas A1 - Schell, Norbert A1 - Pyczak, Florian A1 - Göken, Mathias A1 - Neumeier, Steffen T1 - The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density T2 - Metallurgical and Materials Transactions A Y1 - 2018 U6 - https://doi.org/10.1007/s11661-018-4757-2 SN - 1543-1940 SN - 1073-5623 VL - 49 IS - 9 SP - 4070 EP - 4078 ER - TY - GEN A1 - Wang, Li A1 - Oehring, Michael A1 - Lorenz, Uwe A1 - Stark, Andreas A1 - Pyczak, Florian T1 - New insights into perovskite-Ti3AlC precipitate splitting in a Ti-45Al-5Nb-0.75C alloy by transmission electron microscopy T2 - Intermetallics Y1 - 2018 U6 - https://doi.org/10.1016/j.intermet.2018.06.006 SN - 0966-9795 VL - 100 SP - 70 EP - 76 ER - TY - GEN A1 - Li, Yuzhi A1 - Pyczak, Florian A1 - Paul, Jonathan A1 - Yao, Zekun T1 - Oxidation behaviors of Co-Al-W-0.1B superalloys in a long-term isothermal exposure at 900 °C T2 - Journal of Materials Science and Technology Y1 - 2018 U6 - https://doi.org/10.1016/j.jmst.2018.03.013 SN - 1005-0302 VL - 34 IS - 11 SP - 2212 EP - 2217 ER - TY - GEN A1 - Wang, Li A1 - Oehring, Michael A1 - Lorenz, Uwe A1 - Yang, Junjie A1 - Pyczak, Florian T1 - Influence of alloying additions on L1₂ decomposition in γ-γʹ Co-9Al-9W-2X quaternary alloys T2 - Scripta Materialia Y1 - 2018 SN - 1359-6462 VL - 154 SP - 176 EP - 181 ER - TY - GEN A1 - Lazurenko, Daria V. A1 - Stark, Andreas A1 - Esikov, Maksim A. A1 - Paul, Jonathan A1 - Bataev, Ivan A. A1 - Kashimbetova, Adelya A. A1 - Mali, Vyacheslav I. A1 - Lorenz, Uwe A1 - Pyczak, Florian T1 - Ceramic-Reinforced γ-TiAl-Based Composites: Synthesis, Structure, and Properties T2 - Materials Y1 - 2019 U6 - https://doi.org/10.3390/ma12040629 SN - 1996-1944 VL - 12 IS - 4 ER - TY - GEN A1 - Song, Lin A1 - Wang, Li A1 - Oehring, Michael A1 - Hu, Xingguo A1 - Appel, Fritz A1 - Pyczak, Florian A1 - Zhang, Tiebang T1 - Evidence for deformation twinning of the D019-α2 phase in a high Nb containing TiAl alloy T2 - Intermetallics Y1 - 2019 U6 - https://doi.org/10.1016/j.intermet.2019.03.014 SN - 0966-9795 VL - 109 SP - 91 EP - 96 ER - TY - GEN A1 - Wang, Li A1 - Song, Lin A1 - Stark, Andreas A1 - Liu, Yong A1 - Oehring, Michael A1 - Lorenz, Uwe A1 - Pyczak, Florian T1 - Identification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloy T2 - Journal of Alloys and Compounds Y1 - 2019 SN - 0925-8388 VL - 805 SP - 880 EP - 886 ER - TY - GEN A1 - Song, Lin A1 - Hu, Xingguo A1 - Wang, Li A1 - Stark, Andreas A1 - Lazurenko, Daria V. A1 - Lorenz, Uwe A1 - Lin, Junpin A1 - Pyczak, Florian A1 - Zhang, Tiebang T1 - Microstructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon addition T2 - Journal of Alloys and Compounds Y1 - 2019 U6 - https://doi.org/10.1016/j.jallcom.2019.151649 SN - 0925-8388 VL - 807 ER - TY - GEN A1 - Han, Liuliu A1 - Xu, Xiandong A1 - Wang, Li A1 - Pyczak, Florian A1 - Zhou, Rui A1 - Liu, Yong T1 - A eutectic high-entropy alloy with good high-temperature strength-plasticity balance T2 - Materials Research Letters Y1 - 2019 SN - 2166-3831 VL - 7 IS - 11 SP - 460 EP - 466 ER -