TY - GEN A1 - Pérez, Eduardo A1 - Maldonado, David A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Perez-Bosch Quesada, Emilio A1 - Cantudo, Antonio A1 - Jimenez-Molinos, Francisco A1 - Wenger, Christian A1 - Roldan, Juan Bautista T1 - A comparison of resistive switching parameters for memristive devices with HfO2 monolayers and Al2O3/HfO2 bilayers at the wafer scale T2 - 14th Spanish Conference on Electron Devices (CDE 2023), Valencia, Spain, 06-08 June 2023 N2 - Memristive devices integrated in 200 mm wafers manufactured in 130 nm CMOS technology with two different dielectrics, namely, a HfO2 monolayer and an Al2O3/HfO2 bilayer, have been measured. The cycle-to-cycle (C2C) and device-todevice (D2D) variability have been analyzed at the wafer scale using different numerical methods to extract the set (Vset) and reset (Vreset) voltages. Some interesting differences between both technologies were found in terms of switching characteristics KW - RRAM Y1 - 2023 SN - 979-8-3503-0240-0 U6 - https://doi.org/10.1109/CDE58627.2023.10339417 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - GEN A1 - Uhlmann, Max A1 - Rizzi, Tommaso A1 - Wen, Jianan A1 - Quesada, Emilio Pérez-Bosch A1 - Beattie, Bakr Al A1 - Ochs, Karlheinz A1 - Pérez, Eduardo A1 - Ostrovskyy, Philip A1 - Carta, Corrado A1 - Wenger, Christian A1 - Kahmen, Gerhard T1 - End-to-end design flow for resistive neural accelerators T2 - IEEE transactions on computer-aided design of integrated circuits and systems N2 - Neural hardware accelerators have demonstrated notable energy efficiency in tackling tasks, which can be adapted to artificial neural network (ANN) structures. Research is currently directed towards leveraging resistive random-access memories (RRAMs) among various memristive devices. In conjunction with complementary metal-oxide semiconductor (CMOS) technologies within integrated circuits (ICs), RRAM devices are used to build such neural accelerators. In this study, we present a neural accelerator hardware design and verification flow, which uses a lookup table (LUT)-based Verilog-A model of IHP’s one-transistor-one-RRAM (1T1R) cell. In particular, we address the challenges of interfacing between abstract ANN simulations and circuit analysis by including a tailored Python wrapper into the design process for resistive neural hardware accelerators. To demonstrate our concept, the efficacy of the proposed design flow, we evaluate an ANN for the MNIST handwritten digit recognition task, as well as for the CIFAR-10 image recognition task, with the last layer verified through circuit simulation. Additionally, we implement different versions of a 1T1R model, based on quasi-static measurement data, providing insights on the effect of conductance level spacing and device-to-device variability. The circuit simulations tackle both schematic and physical layout assessment. The resulting recognition accuracies exhibit significant differences between the purely application-level PyTorch simulation and our proposed design flow, highlighting the relevance of circuit-level validation for the design of neural hardware accelerators. KW - RRAM Y1 - 2025 U6 - https://doi.org/10.1109/TCAD.2025.3597237 SN - 0278-0070 SN - 1937-4151 SP - 1 EP - 5 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - New York ER -