TY - GEN A1 - Böhler, Stefan A1 - Rosencrantz, Sophia A1 - Wolf, Karina A1 - Heinemann, Robert A1 - Schmidt, Peer A1 - Ganster, Johannes A1 - Büsse, Thomas A1 - Balko, Jens A1 - Rosencrantz, Ruben R. T1 - Active protease formulation in commodity polymers withstands melt processing into compounds and blown films T2 - Materials Today Communications N2 - Integrating enzymes into thermoplastic polymers is challenging due to their lack of robustness with respect to temperature and shear fields during conventional melt processing. In the present study, blown films from low-density polyethylene (LDPE) were prepared containing a technical protease from Bacillus sp. First, LDPE/protease compounds were produced followed by blown film extrusion, both processes at melt mass temperatures of 130 °C or higher. Enzyme activity was proven, both for the LDPE/protease compound and the blown film. The highest enzyme activity in the compound was determined for processing at 132 °C and a screw speed of 75 rpm. The influence of melt temperature and shear fields was studied in detail. Enzyme activities were determined for melt temperatures up to 160 °C and for screw speeds ranging from 75 to 300 rpm during compounding by twin-screw extrusion. The process was also applied for biobased and biodegradable polyesters, where similar protease activity after compounding was verified. Electron microscopy, X-ray diffraction, nuclear magnetic resonance spectroscopy and differential scanning calorimetry served to analyze components and morphology of the enzyme formulation used here. It is proposed that the porous morphology of the protease particles is beneficial for the enzyme to remain active after processing. Additionally, the polymer matrix surrounding the particles protects the protease at elevated temperatures, which can be attributed to thermal insulation. Thus, the right combination of a suited technical enzyme formulation with appropriate mild melt compounding conditions allows enzymes to be incorporated into thermoplastics and retain their activity. This opens the way to use the abundant biological functions of enzymes in thermoplastic applications. KW - Thermal analysis KW - X-ray diffraction KW - Crystal structure Y1 - 2023 UR - https://www.sciencedirect.com/science/article/pii/S2352492822018591 U6 - https://doi.org/10.1016/j.mtcomm.2022.105018 SN - 2352-4928 VL - 34 SP - 1 EP - 9 ER - TY - GEN A1 - Froeschke, Samuel A1 - Bestha, Kranthi Kumar A1 - Fucke, Rico A1 - Schiemenz, Sandra A1 - Popov, Alexey A1 - Naumann, Marco A1 - Knupfer, Martin A1 - Giebeler, Lars A1 - Wolf, Daniel A1 - Kizhake Malayil, Ranjith Kumar A1 - Sivan, Saramgi Chencheriparambil A1 - Grafe, Hans-Joachim A1 - Gräßler, Nico A1 - Corredor, Laura T. A1 - Wolter, Anja U. B. A1 - Büchner, Bernd A1 - Schmidt, Peer A1 - Hampel, Silke T1 - Structural and Magnetic Transitions Caused by Dimer Formation in the CrCl3–MoCl3 Solid Solution T2 - Chemistry of Materials N2 - In this work, we apply the concept of solid solutions to the two 2D transition metal trihalides CrCl3 and MoCl3. While CrCl3 belongs to the magnetically active CrX3 family, the magnetism in MoCl3 is intrinsically suppressed by the formation of aligned Mo–Mo dimers, which also distort the regular honeycomb lattice that is typical for the 2D transition metal trihalides. We report suitable synthesis conditions for the gapless solid solution and crystal growth by chemical vapor transport. The CrCl3–MoCl3 solid solution was initially synthesized at 650 °C for 100 h under addition of MoCl5 as mineralizer, and bulk crystals were subsequently grown by vapor transport in a temperature gradient from 600 °C → 550 °C for 60 h. The obtained solid solution exhibits multiple composition-dependent phase transitions at room temperature, as confirmed by powder X-ray diffraction measurements. The possible presence of Mo–Mo dimers in the solid solution was further investigated by infrared, Raman, electron energy loss, and nuclear quadrupole resonance spectroscopies. The combined results indicate that the Mo–Mo dimers are present over a wide range of compositions. Their orientation changes from parallel alignment for compositions from 70% ≤ c(Mo3+) ≤ 100% to random orientation for samples with c(Mo3+) < 70% content, which significantly affects the course of lattice parameters. Finally, the magnetic properties of the powder samples show a correlation between the Mo3+ content and the transition temperature into the low-temperature phase. Y1 - 2024 U6 - https://doi.org/10.1021/acs.chemmater.3c03109 SN - 0897-4756 SN - 1520-5002 VL - 36 IS - 9 SP - 4240 EP - 4253 ER - TY - GEN A1 - Froeschke, Samuel A1 - Yasmen, Nadia A1 - Popov, Alexey A1 - Schiemenz, Sandra A1 - Wolf, Daniel A1 - Giebeler, Lars A1 - Hantusch, Martin A1 - Gräßler, Nico A1 - Büchner, Bernd A1 - Schmidt, Peer A1 - Hampel, Silke T1 - Controlled Nanoplatelet Deposition of 2D Chromium Trihalide Solid Solutions T2 - Chemistry of Materials N2 - The two-dimensional (2D) chromium trihalides CrCl3, CrBr3, and CrI3 are most famous for their exotic magnetic properties when their crystals get downscaled to nanometer dimensions. One way to tune the properties of such materials and to further increase their potential utility, e.g., in spintronics, is the formation of solid solutions. Here, we present a detailed theoretical and experimental study on the synthesis and nanoplatelet growth of CrBrxCl3–x and CrBrxI3–x solid solutions. Phase pure powder was obtained by tempering the respective parent compounds at 600 and 550 °C, using additional iodine in the case of CrBrxI3–x. The dominant stacking order changes at x = 1.8 for CrBrxCl3–x while remaining similar to CrI3 for the whole CrBrxI3–x series. A consecutive chemical vapor transport from 575 → 525 °C for 2 h (CrBrxCl3–x) or 600 → 550 °C for 3 h with 0.1 mmol additional iodine (CrBrxI3–x) resulted in the deposition of high-quality nanoplatelets on a substrate with only several nanometers in height. The composition can be controlled by the choice of the starting material, since only small shifts in the anion ratio occur during the transport. The deposited CrBrxCl3–x nanoplatelets can then be easily delaminated by ultrasonication in ethanol to reduce the height even further to few-layer dimensions. These nanoplatelets could potentially be used to investigate the property changes (e.g., in terms of magnetic response) for the downscaling of these solid solutions. We further demonstrate the quality of the deposited material by transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy. Raman spectroscopy of the solid solution series reveals a complex evolution of vibrational modes. Photoluminescence measurements on solid solution samples show emission peaks in the near-infrared energy range with the specific energy and intensity being composition and temperature dependent. KW - 2D layered compounds KW - Chemical vapor transport KW - Crystal growth KW - Crystal structure KW - Halides KW - Thermodynamic modeling Y1 - 2023 UR - https://pubs.acs.org/doi/full/10.1021/acs.chemmater.2c03785 U6 - https://doi.org/10.1021/acs.chemmater.2c03785 SN - 1520-5002 SN - 0897-4756 VL - 35 IS - 11 SP - 4136 EP - 4148 ER - TY - GEN A1 - Froeschke, Samuel A1 - Schroth, Karl-Georg A1 - Steiner, Udo A1 - Popov, Alexey A1 - Schiemenz, Sandra A1 - Wolf, Daniel A1 - Giebeler, Lars A1 - Gräßler, Nico A1 - Büchner, Bernd A1 - Schmidt, Peer A1 - Hampel, Silke T1 - Understanding the chemistry of 2D rhodium trihalide solid solutions: tuning of optical properties and nanocrystal deposition T2 - 2D Materials N2 - In the search for novel 2D materials with potentially valuable properties, such as a tunable band gap for optoelectronic or catalytic applications, solid solutions hold the potential to significantly expand the inventory of available 2D nanomaterials. In this study, we present for the first time the synthesis of such 2D rhodium trihalide solid solutions: RhBrxCl3−x and RhBrxI3−x. We use thermodynamic simulations and simultaneous thermal analysis to predict conditions for their rational synthesis and to investigate suitable chemical vapor transport (CVT) parameters for these solid solutions. The evolution of the lattice parameters was investigated by powder x-ray diffraction, showing an isostructural relationship of the synthesized compounds and only minor deviation from Vegard's law. The optical band gap of these materials can be tuned in an energy range from 1.5 eV (RhCl3) to 1.2 eV (RhI3) by choosing the composition of the solid solution, while the samples also exhibit photoluminescence in similar energy ranges. Ultimately, the successful deposition of bulk as well as ultrathin 2D nanocrystals of RhBrxCl3−x by CVT from 925 °C to 850 °C is shown, where the composition of the deposited crystals is precisely controlled by the choice of the starting composition and the initial amount of material. The high quality of the obtained nanocrystals is confirmed by atomic force microscopy, high resolution transmission electron microscopy and selected area electron diffraction. For RhBrxI3−x, the CVT from 900 °C to 825 °C is more difficult and has only been practically demonstrated for an exemplary case. According to the observed properties, these novel solid solutions and nanocrystals show a great potential for an application in optoelectronic devices. KW - Crystal growth KW - Chemical vapor transport KW - Crystal structure KW - Thermodynamic modeling KW - 2D layered compounds KW - Halides Y1 - 2023 UR - https://iopscience.iop.org/article/10.1088/2053-1583/acd012 U6 - https://doi.org/10.1088/2053-1583/acd012 SN - 2053-1583 VL - 10 IS - 3 SP - 1 EP - 12 ER - TY - GEN A1 - Vinokurova, Ekaterina A1 - Knorr, Monika A1 - Efimova, Anastasia A1 - Ovchinnikov, Alexander A1 - Schmidt, Peer A1 - Büchner, Bernd A1 - Isaeva, Anna A1 - Roslova, Maria T1 - Microstructural evolution of layered K-doped RuCl3 during annealing traced by thermogravimetric analysis and 3D electron diffraction T2 - Zeitschrift für Anorgische und Allgemeine Chemie N2 - Nanoscale phase separation was induced in the K-doped RuCl3 van der Waals material by annealing, and studied with the goal to find a natural design strategy for the formation of two-dimensional architectures as an alternative to the costly and time-consuming experimental artificial growth methods. Phase conversion was traced by means of thermogravimetric analysis combined with mass spectrometry. The local crystal structure of co-existing K3Ru2Cl9 domains with the sizes of about 100 nm was solved by 3D electron diffraction. KW - 2D layered compounds KW - Chemical vapor transport KW - Crystal growth KW - Crystal structure KW - Halides KW - Thermal analysis Y1 - 2023 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/zaac.202300141 U6 - https://doi.org/10.1002/zaac.202300141 SN - 0044-2313 SN - 1521-3749 VL - 649 IS - 19 SP - 1 EP - 8 ER - TY - GEN A1 - Putze, Philipp A1 - Ritschel, Tobias A1 - Chekhonin, Paul A1 - Geck, Jochen A1 - Wolf, Daniel A1 - Popov, Alexey A1 - Büchner, Bernd A1 - Schmidt, Peer A1 - Hampel, Silke T1 - Creating chirality in WSe₂ through screw dislocations by chemical vapor transport T2 - Nanoscale horizons N2 - Screw dislocation-driven nanostructures of two-dimensional transition metal dichalcogenides (2D TMDs) can feature chirality that enables prominent asymmetric optical properties. One of the outstanding representatives is WSe₂ as it can exhibit intriguing new size and shape-dependent chemical and physical properties compared to its bulk counterpart. Crystal growth control in nanostructures with screw dislocation-driven growth is central for exploiting their structure-related properties. However, bottom-up syntheses of 2D TMDs usually contain ‘trial and error’ approaches. Here we report on the rational synthesis planning and realizing for the binary system W:Se to achieve chirality in nano-scale crystals by chemical vapor transport (CVT). For that purpose, key parameters were modelled based on thermodynamic datasets. Thus, crystal growth by CVT under addition of SeCl4 succeeds for right-handed spiral nanocrystals from 850 °C to 800 °C with a dwell time of 60 min, while left-handed spirals are obtained from 915 °C to 860 °C. Surface-fused SiO₂ nanoparticles on an Si(100) substrate served as potential nucleation points. Chirality of screwed WSe₂ was unprecedentedly investigated by circular-polarized Raman Spectroscopy and showed an intensity increase of the E¹₂g mode of 29% and 15% for right and left-handed spirals, respectively. Pyramid-like WSe2 analyzed by atomic force microscopy exhibits step heights of around 10 nm. Electron backscatter diffraction patterns reveal a convex curvature for WSe₂ with the curvature radii determined as Rx = (270 ± 32) μm and Ry = (141 ± 9) μm, respectively. KW - Chrystal growth KW - Chemical vapor transport KW - Thermodynamic modeling KW - 2D layered compounds KW - Chalcogenides Y1 - 2025 UR - https://pubs.rsc.org/en/content/articlelanding/2025/nh/d4nh00567h U6 - https://doi.org/10.1039/D4NH00567H VL - 10 IS - 5 SP - 944 EP - 956 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Putze, Philipp A1 - Wolf, Daniel A1 - Chekhonin, Paul A1 - Popov, Alexey A1 - Ritschel, Tobias A1 - Lubk, Axel A1 - Geck, Jochen A1 - Büchner, Bernd A1 - Schmidt, Peer A1 - Hampel, Silke T1 - Twisted and screw dislocation-driven growth of MoSe₂ nanostructures by chemical vapor transport T2 - Nano research N2 - Twisted multilayers of two-dimensional materials attract widespread research interest due to their intriguing electronic and optical properties related to their chiral symmetry breaking and Moiré effects. The two-dimensional transition metal dichalcogenide MoSe₂ is a particular promising material for twisted multilayers, capable of sustaining Moiré excitons. Here, we report on a rational bottom-up synthesis approach for twisted MoSe₂ flakes by chemical vapor transport (CVT). Screw dislocation-driven growth was forced by surface-fused SiO₂ nanoparticles on the substrates that serve as potential nucleation points in low supersaturation condition. Thus, crystal growth by in-situ CVT under addition of MoCl₅ leads to bulk 2H-MoSe₂ in a temperature gradient from 900 °C to 820 °C with a dwell time of 96 h. Hexagonally shaped 2H-MoSe₂ flakes were grown from 710 °C to 685 °C with a dwell time of 30 min on SiO₂@Al₂O₃(0001) substrates. Electron backscatter diffraction as well as electron microscopy reveals the screw dislocation-driven growth of triangular 3R-MoSe₂ with individual step heights between 0.9 nm and 2.9 nm on SiO₂@Si(100) under the same conditions. Finally, twisted MoSe₂ flakes exhibiting a twist angle of 19° with respect to the [010] zone axis could be synthesized. KW - Chrystal growth KW - Chemical vapor transport KW - Thermodynamic modeling KW - 2D layered compounds KW - Chalcogenides Y1 - 2025 UR - https://www.sciopen.com/article/10.26599/NR.2025.94908020 U6 - https://doi.org/10.26599/NR.2025.94908020 SN - 1998-0000 IS - 18 SP - 1 EP - 23 PB - Tsinghua University Press ER - TY - VIDEO A1 - Michalk, Silke A1 - Bartholomäus, Heike A1 - Schmidt, Peer T1 - Von starren Grenzen zu freien Wegen : die Entfaltung von Bildungspotenzialen T2 - University:Future Festival (U:FF), 13. bis 15. Mai 2025 N2 - Wie kann Studium neu gedacht werden? Die BTU Cottbus-Senftenberg diskutiert ein zukunftsfähiges Hochschulmodell, das Profillinien, Microcredentials und Future Skills integriert. Im Rahmen der Neugestaltung der Rahmenstudienordnungen und im Kontext der Empfehlungen des Wissenschaftsrates zur Weiterentwicklung des Hochschulsystems Brandenburg entsteht ein zukunftsfähiges Hochschulmodell, das Durchlässigkeit, Flexibilität und Qualität vereint. Der Transformationsprozess setzt auf die Schaffung individueller Bildungswege entlang des gesamten, weiter gefassten Student Life Cycles, wodurch die Attraktivität des Studiums und der Studienerfolg gesteigert werden. KW - Flexibilisierung KW - Microcredentials KW - Future Skills Y1 - 2025 UR - https://www.youtube.com/watch?v=Vilb_MeAC-0&t=457s ER - TY - RPRT A1 - Schmidt, Peer A1 - Giese, Marie A1 - Heinemann, Robert A1 - Nawdiyal, Amruta A1 - Knorr, Monika A1 - Breitkopf, Cornelia A1 - Schneegans, Marcel Felix A1 - Pinnau, Sebastian A1 - Lorenz, Tommy A1 - Mickoleit, Erik A1 - to Baben, Moritz A1 - Keuter, Philipp A1 - Müller, Michael A1 - Sergeev, Dmitry A1 - Ewaznezhad Fard, Darya A1 - Morsa, Amedeo A1 - Rhys, Dominic Jacob A1 - Yazhenskikh, Elena T1 - PCM-Screening-2 : Evaluierung eutektischer Gemische für den Einsatz als PCM : thermodynamische Modellierung und experimentelle Methoden - 2 T2 - Deutsche Forschungsberichte N2 - Durch den Einsatz von Wärme- und Kältespeichern in Gebäuden, Industrieanlagen und Kraftwerken können Lastschwankungen reduziert und die Anlageneffizienz verbessert werden. Latentwärmespeicher (PCM) ermöglichen durch Ausnutzung einer fest-flüssig Phasenumwandlung hohe Speicherdichten bei geringen Temperaturdifferenzen. Die Verfügbarkeit geeigneter und kostengünstiger PCM’s ist derzeit noch eingeschränkt. Ein Screening geeigneter Stoffsysteme zur Bildung multinärer Eutektika durch thermodynamische Modellierung der Phasengleichgewichte erlaubt fundierte Vorhersagen zur Zusammensetzung eutektischer Gemische, ihren Schmelztemperaturen und -enthalpien. Auf Basis der Literatur, umfangreicher experimenteller Untersuchungen und Simulationen wurde im Projekt eine im Temperaturbereich nicht eingeschränkte thermochemische Datenbank für das komplexe Stoffsystem Na+, K+, Ca2+, Mg2+ // Cl−, NO3−, SO4_2−, CO3_2− // H2O geschaffen, die eine Auswahl neuer PCM mit optimalen thermodynamischen Eigenschaften für spezifische Prozessanforderungen auf Basis von in Deutschland in großen Mengen verfügbaren, preiswerten Rohstoffen ermöglicht. Weiterhin wurde ein CalPhaD-basiertes Viskositätsmodell, ein Screening-Verfahren inkl. Webserver und intuitive Visualisierungsmöglichkeiten hochkomponentiger Systeme entwickelt. Mittels eines Screenings erfolgte eine Vorauswahl von potentiell als PCM geeigneten Gemischen, die umfangreich charakterisiert wurden. Auf Basis der vielversprechenden Speicherdichten und der niedrigen Materialkosten wird erwartet, dass ein oder mehrere dieser identifizierten PCMs in die Anwendung als thermische Speicher gebracht werden können. N2 - The use of heat and cold storage systems in buildings, industrial plants, and power stations can reduce load fluctuations and improve plant efficiency. Latent heat storage systems (phase change materials - PCM) enable high storage densities with low temperature differences by exploiting a solid-liquid phase transition. The availability of suitable and cost-effective PCMs is currently still limited. Screening suitable material systems for the formation of multinary eutectics through thermodynamic modeling of phase equilibria allows well-founded predictions to be made about the composition of eutectic mixtures, their melting temperatures, and enthalpies. Based on the literature, extensive experimental investigations, and simulations, the project created a thermochemical database for the complex material system Na+, K+, Ca2+, Mg2+ // Cl−, NO3−, SO4_2−, CO3_2− // H2O was created, which enables the selection of new PCMs with optimal thermodynamic properties for specific process requirements based on inexpensive raw materials available in large quantities in Germany. Furthermore, a CalPhaD-based viscosity model, a screening procedure including a web server, and intuitive visualization options for highly component systems were developed. A screening process was used to preselect mixtures potentially suitable as PCMs, which were then extensively characterized. Based on the promising storage densities and low material costs, it is expected that one or more of these identified PCMs can be put into application as thermal storage. KW - PCM KW - Latenwärmespeicher KW - Eutektische Gemische KW - Thermodynamische Daten KW - Thermodynamische Modellierung KW - Anorganische Salzhydrate KW - Anorganische Salze Y1 - 2026 UR - https://oa.tib.eu/renate/handle/123456789/29435 U6 - https://doi.org/10.34657/28504 ER -