TY - JOUR A1 - Hoffmann, Patrick A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter A1 - Kittler, Martin T1 - A spectro-microscopic approach to study the morphology and elemental distribution of mc-Si surfaces Y1 - 1999 ER - TY - JOUR A1 - Mikalo, Ricardo Pablo A1 - Hoffmann, Patrick A1 - Böhme, O. A1 - Schmeißer, Dieter T1 - Doping inhomogenities in Polypyrrole films: a Photoemission Electron Microscope (PEEM) and Spectro-Microscopic Study Y1 - 1998 ER - TY - JOUR A1 - Mikalo, Ricardo Pablo A1 - Hoffmann, Patrick A1 - Heller, Thomas A1 - Schmeißer, Dieter T1 - Lateral Doping Inhomogeneities as Revealed by ?-NEXAFS and ?-PES Y1 - 1998 ER - TY - GEN A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Improvement of Nitrogen Incorporation into Oxynitrides on 4H-SiC(0001) T2 - Nuclear Instruments and Methods in Physics Research, Section B : Beam with Materials and Atoms Y1 - 2006 VL - 246 IS - 1 SP - 85 EP - 89 ER - TY - JOUR A1 - Wehner, Stefan A1 - Schmeißer, Dieter A1 - Hoffmann, Patrick T1 - Spatiotemporal patterns of external noise-induced transitions in a bistable reaction-diffusion system : Photoelectron Emission Microscopy experiments and modeling Y1 - 2005 ER - TY - JOUR A1 - Hoffmann, Patrick T1 - Chemical state depth profiling of ultra-thin oxynitride layers by photoelectron spectroscopy Y1 - 2004 ER - TY - GEN A1 - Lewerenz, Hans-Joachim A1 - Murrell, Chris A1 - Jakubowicz, J. A1 - Aggour, Mohammed A1 - Kanis, M. A1 - Campbell, S. A. A1 - Cox, P. A. A1 - Hoffmann, Patrick A1 - Jungblut, H. A1 - Schmeißer, Dieter T1 - High Resolution Surface analysis of Si Roughenning in Dilute Ammonium Fluoride Solution T2 - Journal of Electroanalytical Chemistry N2 - The initial stages of porous Si formation on Si(111) in dilute ammonium fluoride solution are analysed by photoelectron spectroscopy using synchrotron radiation (SRPES). The PES results in the por-Si formation regime partly support a recent dissolution model. The contribution from the Si 2p surface core level shift shows that 0.35 ML of the surface is still H-terminated after interruption of the conditioning process at the first photocurrent maximum. Two signals shifted in binding energy by 0.8 and 1 eV, respectively, are attributed to reaction intermediates expected from the proposed reaction mechanism and from theoretical calculations using density functional theory (DFT). A distinct roughening is found in in-situ AFM measurements, with a calculated RMS roughness parameter of 2.6 nm. KW - Porous Si KW - transistors KW - Electropolishing KW - Photoelectron spectroscopy KW - AFM KW - Synchrotron radiation Y1 - 2003 SN - 1873-2569 VL - 540 SP - 3 EP - 6 ER - TY - GEN A1 - Lewerenz, Hans-Joachim A1 - Aggour, Mohammed A1 - Murrell, Chris A1 - Kanis, M. A1 - Hoffmann, Patrick A1 - Jungblut, H. A1 - Schmeißer, Dieter T1 - Interface engineering of photoelectrochemically prepared Si surfaces N2 - The oxide of Si(111) formed by electropolishing in dilute ammonium fluoride solution is analysed by photoelectron spectroscopy using synchrotron radiation. The oxidiclayer is about 3.1 nm thick and contains Si-F-x species as well as oxyfluorides. The oxyfluorides are found preferentially at the electropolishing layer surface. SiOHspecies are concentrated at the oxidic film/substrate interface. The full width half maximum of the Si 2p line indicates that the Si/electropolishing oxide interface issmoother than the Si/natural oxide interface. KW - Mean Free Paths KW - Silicon KW - Range Y1 - 2002 ER - TY - THES A1 - Hoffmann, Patrick T1 - Untersuchungen zu Inhomogenitäten an der Halbleitergrenzfläche Silizium-Siliziumoxynitrid KW - Grenzflächeneigenschaften KW - SiO2 KW - SiON KW - Synchrotron-basierte Röntgen-Spektroskopie KW - XPS KW - XAS Y1 - 2003 SN - 3-8322-1982-X PB - Shaker-Verlag CY - Aachen ER - TY - JOUR A1 - Sieber, N. A1 - Seyller, Th. A1 - Graupner, R. A1 - Ley, L. A1 - Mikalo, Ricardo Pablo A1 - Hoffmann, Patrick A1 - Batchelor, David R. A1 - Schmeißer, Dieter T1 - Wet-chemical preparation of silicate adlayer reconstructed SiC(0001) surfaces as studied by PIES and LEED N2 - We have studied the surface chemistry of 6H-SiC(0001) and 6H-SiC (000 (1) over bar) after wet-chemical treatment using photoelectron spectroscopy (PES) andlow-energy electron diffraction (LEED). The origin of chemically shifted components in the Si2p and C1s spectra is discussed in the light of previous studies onwet-chemically prepared surfaces and on silicate adlayer reconstructed surfaces. On 6H-SiC(0001) an ordered silicate adlayer was prepared by etching the surface withsulfuric acid based agents. KW - Core level KW - Photoelectron spectroscopy KW - Synchrotron radiation KW - Wet-chemical preparation OXIDE Y1 - 2002 ER - TY - GEN A1 - Aggour, Mohammed A1 - Stoerkel, Ulrich A1 - Murrell, Chris A1 - Campbell, S. A. A1 - Jungblut, H. A1 - Hoffmann, Patrick A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter A1 - Lewerenz, Hans-Joachim T1 - Electrochemical interface modification of CuInS2 thin films N2 - We studied two novel electrochemical treatments of CuInS2 solar-cell absorber films, introduced to remove the deleterious segregated CuS phase. Their influence onsurface topography, chemistry and electronic properties was investigated using in situ atomic force microscopy (AFM) and photoclectron spectroscopy, performed inpart at the U49/2 undulator beam line at BESSY II. The results are examined in order to develop an improved understanding of the chemical-electrochemical surfacetransformation processes. KW - thin-film solar cells KW - copper indium disulfide KW - atomic force microscopy (AFM) KW - photoelectron spectroscopy KW - synchrotron radiation KW - Solar-Cell Y1 - 2002 ER - TY - JOUR A1 - Hoffmann, Patrick A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter T1 - PEEM - a spectromicroscopic tool for mc-Si surface evaluation N2 - The photo emission electron microscope (PEEM) with its direct imaging of the sample surface is a convenient tool for fast evaluation of large sample areas. It is possibleto handle samples with a size of 30 mm x 30 mm.With PEEM it is possible to visualise grain boundaries and crystal displacements without removing the native oxide. No special sample treatment is needed exceptchemical polishing of the sample surface and a HF-dip to obtain a thin (1 ... 2 nm) oxide layer.The quality of that oxide was proofed by high resolution photo electron spectroscopy (PES) at a synchrotron. The results were compared to native oxide onsingle-crystalline Si and no suboxides (e.g. SiO) were found. Our spectromicroscopic PEEM measurements show no difference in the oxide qualities of different grainsand on grain boundaries or crystal displacements. Furthermore no difference in the binding energy of Si2p core levels were found.In addition to grain boundaries other spot-like features were found on the sample surface. These could be identified in some cases as precipitation of Ca underneath thenative oxide. KW - multicrystalline silicon KW - photoelectron spectroscopy KW - PEEM Y1 - 2002 ER - TY - CHAP A1 - Schmeißer, Dieter A1 - Hoffmann, Patrick A1 - Müssig, Hans-Joachim T1 - The Pr2O3/Si(001) interface: a mixed Si-Proxide T2 - BESSY annual report 2001 Y1 - 2002 SP - 171 EP - 173 PB - Bessy CY - Berlin ER - TY - JOUR A1 - Müller, Klaus A1 - Hoffmann, Patrick A1 - Milko, S. A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - PEEM and µ-NEXAFS of Cu-In-S-Surfaces N2 - The composition of CuInS2-films tends to differ from the ideal ratio of 1:1:2. A molecularlyvariation of dm=[Cu]/[In]-1 not equal 0 occurs due to the formation of binary phases as segregation's at the surface, as crystallites in the bulk of the film or at the surface of grains [1]. Furthermore, the range of homogeneity of the phase CuInS2 is relatively large caused by a low enthalpy of formation of defects like Cu-vacancies [2]. Segregation's at surfaces can be removed by KCN etching or by an electrochemical process [3, 4] We investigated the effect of an in-situ-heat-treatment of samples, prepared in the Cu-rich regime with additional amounts of copper, deposited on the surface of the Cu-In-S-films.We used Cu-In-S-films on molybdenum, prepared from precursors of Cu/In and a following reactive annealing-process in a sulphur-atmosphere. The experiments were performed as follows: The surface of the films was cleaned in situ to remove CuS-Phases by Argon-bombardment. The thin layers of additional Copper were prepared by evaporation of copper metal in Knudsen-cells. The thickness of this copper-films is in the range of monolayers, revealed by a calibration with copper on iron-substrates. After this deposition the samples were heated up to several temperatures (up to 550 ºC) for ten minutes, respectively. Here the molybdenum back-contact was used as electrical heater. Y1 - 2002 ER - TY - CHAP A1 - Henkel, Karsten A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Backpropagation-Netzwerke für ein Zweisensorsystem zur Erfassung von Kohlendioxidkonzentrationen und relativer Luftfeuchte T2 - Sensoren im Fokus neuer Anwendungen : Verbraucherschutz und Lebensmittelkontrolle, Biosysteme und Nanobiotechnologie, Umweltmesstechnik, neue Sensormaterialien, Mess- und Eichwesen N2 - Zwei Schwingquarzsensoren mit gleicher sensitiver Beschichtung wurden zur Messung von CO2-Konzentrationen bei variierenden Luftfeuchten genutzt. Die Daten wurden neuronalen Netzen mit unterschiedlicher Architektur trainiert. Zwei Netze wurden auf ihre Generalisierungsfähigkeit getestet und miteinander verglichen. Für ein einstufiges Netz konnten Ergebnisse mit Fehlern kleiner 12% für die CO2-Konzentration und kleiner 5% für die Luftfeuchte erzielt werden. Ein zweistufiges Netz erkannte Kategorien der Luftfeuchte 100%-ig, für die CO2-Konzentration wurden Fehler kleiner 9% erreicht, wobei eine deutlich bessere Generalisierungsfähigkeit dieses Netzes im Vergleich zum einstufigen Netz zu verzeichnen ist. Y1 - 2002 SN - 3-935712-71-5 SN - 978-3-935712-71-2 SP - 104 EP - 107 PB - w.e.b. Universitätsverlag CY - Dresden ER - TY - JOUR A1 - Batchelor, David R. A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Photoemission study of Aluminium Steel cold welded joints N2 - Aluminium and Stainless Steel bi-metal material is extremely versatile and is used in a wide range of products; from cooking utensils to high technology applications such as automobile manufacture and Synchrotron radiation instrumentation. As a consequence of this wide range of applications the study of the formation of Aluminium Steel junctions and the bonding mechanism is of considerable industrialimportance [1-3].In a previous publication [4] evidence for a chemical bond, alloying at the interface was found. As the monochromator focus and welded region are similar in size about 200 µm (the actual interface from SEM is an order of magnitude smaller) a simple photoemission experiment of translating the sample perpendicular (vertically, weld horizontal) to the weld and measuring spectra was performed. Y1 - 2002 ER - TY - JOUR A1 - Jäckel, B. A1 - Thißen, A. A1 - Hunger, Ralf A1 - Klein, A. A1 - Jaegermann, Wolfram A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Focus IS-PEEM investigations at U49/II: experimental determination of a magnification function, the contrast mechanism and the spectral resolution Y1 - 2002 ER - TY - JOUR A1 - Hoffmann, Patrick A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter T1 - A spectro-microscopic approach for spatially resolved characterisation of semiconductor structures in PEEM Y1 - 2000 ER - TY - JOUR A1 - Mikalo, Ricardo Pablo A1 - Appel, Günter A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Determination of the Vacuum Level in NEXAFS-spectra by Selected-Yield-NEXAFS Y1 - 1999 ER - TY - JOUR A1 - Hoffmann, Patrick A1 - Mikalo, Ricardo Pablo A1 - Schmeißer, Dieter T1 - Photoemissionselektronenmikroskopie - ein Instrument für die Materialforschung Y1 - 1999 ER -