TY - GEN A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Xavier, Fabio A1 - Riess, Michael A1 - Sens, Marc A1 - Benz, Andreas T1 - 0D/3D Simulations of Combustion in Gasoline Engines Operated with Multiple Spark Plug Technology T2 - SAE Technical Papers N2 - A simulation method is presented for the analysis of combustion in spark ignition (SI) engines operated at elevated exhaust gas recirculation (EGR) level and employing multiple spark plug technology. The modeling is based on a zero-dimensional (0D) stochastic reactor model for SI engines (SI-SRM). The model is built on a probability density function (PDF) approach for turbulent reactive flows that enables for detailed chemistry consideration. Calculations were carried out for one, two, and three spark plugs. Capability of the SI-SRM to simulate engines with multiple spark plug (multiple ignitions) systems has been verified by comparison to the results from a three-dimensional (3D) computational fluid dynamics (CFD) model. Numerical simulations were carried for part load operating points with 12.5%, 20%, and 25% of EGR. At high load, the engine was operated at knock limit with 0%, and 20% of EGR and different inlet valve closure timing. The quasi-3D treatment of combustion chamber geometry and the spherical flame propagation by the 0D SI-SRM enabled for estimating the impact of number of spark plugs on the combustion progress and the risk of knock occurrence. Application of three spark plugs shortened significantly the combustion process. When the engine was operated at knock limit and with 20% EGR, combustion duration was similar to that of engine operation without EGR and with one spark plug. Overall, the results presented demonstrate that this method has the potential to support early stages of engine development with limited experimental data available. KW - Spark Igniton Engine, Multiple Spark Plug Technology, Stochastic Reactor Modeling Y1 - 2015 U6 - https://doi.org/10.4271/2015-01-1243 SN - 0148-7191 SN - 0096-5170 IS - 2015-01-1243 ER - TY - GEN A1 - Matrisciano, Andrea A1 - Borg, Anders A1 - Perlman, Cathleen A1 - Lehtiniemi, Harry A1 - Pasternak, Michal A1 - Mauß, Fabian T1 - Soot Source Term Tabulation Strategy for Diesel Engine Simulations with SRM T2 - SAE Technical Papers N2 - In this work a soot source term tabulation strategy for soot predictions under Diesel engine conditions within the zero-dimensional Direct Injection Stochastic Reactor Model (DI-SRM) framework is presented. The DI-SRM accounts for detailed chemistry, in-homogeneities in the combustion chamber and turbulence-chemistry interactions. The existing implementation [1] was extended with a framework facilitating the use of tabulated soot source terms. The implementation allows now for using soot source terms provided by an online chemistry calculation, and for the use of a pre-calculated flamelet soot source term library. Diesel engine calculations were performed using the same detailed kinetic soot model in both configurations. The chemical mechanism for n-heptane used in this work is taken from Zeuch et al. [2] and consists of 121 species and 973 reactions including PAH and thermal NO chemistry. The engine case presented in [1] is used also for this work. The case is a single-injection part-load passenger car Diesel engine with 27 % EGR fueled with regular Diesel fuel. The two different approaches are analyzed and a detailed comparison is presented for the different soot processes globally and in the mixture fraction space. The contribution of the work presented in this paper is that a method which allows for a direct comparison of soot source terms - calculated online or retrieved from a flamelet table - without any change in the simulation setup has been developed within the SRM framework. It is a unique tool for model development. Our analysis supports our previous conclusion [1] that flamelet soot source terms libraries can be used for multi-dimensional modeling of soot formation in Diesel engines. KW - Diesel Engine, Stochastic Reactor Modeling, Particlulate Matter Y1 - 2015 U6 - https://doi.org/10.4271/2015-24-2400 SN - 0148-7191 SN - 0096-5170 IS - 2015-24-2400 SP - 1 EP - 15 ER - TY - CHAP A1 - Seidel, Lars A1 - Klauer, Christian A1 - Pasternak, Michal A1 - Matrisciano, Andrea A1 - Netzer, Corinna A1 - Hilbig, Martin A1 - Mauß, Fabian T1 - Systematic Mechanism Reduction for Engine Applications T2 - 5th International Workshop on Model Reduction in Reacting Flows, Lübbenau, 2015 N2 - In this work we apply various concepts of mechanism reduction with a PDF based method for species profile conservation. The reduction process is kept time efficient by only using 0D and 1D reactors. To account for the expansion phase in internal combustion engines a stochastic engine tool is used to validate the reduction steps. KW - Combustion, Mechanism Reduction Y1 - 2015 UR - www.modelreduction.net UR - http://modelreduction.net/wp-content/uploads/2015/07/5th_IWMRRF_2015.pdf ER - TY - CHAP A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Matrisciano, Andrea ED - Sens, Marc ED - Baar, Roland T1 - Diesel Engine Performance Mapping Using Stochastic Reactor Model T2 - Proceedings of the 2nd Conference on Engine Processes, July 2–3, 2015, Berlin, Germany KW - Diesel Engine Performance Mapping Y1 - 2015 SN - 978-3-7983-2768-9 SP - 217 EP - 232 PB - Tech. Univ., Universitätsverlag CY - Berlin ER - TY - GEN A1 - Matrisciano, Andrea A1 - Pasternak, Michal A1 - Wang, Xiaoxiao A1 - Antoshkiv, Oleksiy A1 - Mauß, Fabian A1 - Berg, Peter T1 - On the Performance of Biodiesel Blends – Experimental Data and Simulations Using a Stochastic Fuel Test Bench T2 - SAE Technical Papers Y1 - 2014 U6 - https://doi.org/10.4271/2014-01-1115 SN - 0148-7191 SN - 0096-5170 IS - 2014-01-1115 SP - 1 EP - 8 ER - TY - CHAP A1 - Matrisciano, Andrea A1 - Borg, Anders A1 - Perlman, Cathleen A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Netzer, Corinna A1 - Mauß, Fabian A1 - Lehtiniemi, Harry T1 - Simulation of DI-Diesel combustion using tabulated chemistry approach T2 - 1st Conference on Combustion Processes in Marine and Automotive Engines, 7th - 8th June 2016, Lund, Schweden KW - Simulation of DI-Diesel Y1 - 2016 UR - http://ecco-mate.eu/images/Training%20events/LUND/ECCO-MATE_C1_Proceedings.pdf SP - 44 EP - 47 ER - TY - CHAP A1 - Seidel, Lars A1 - Netzer, Corinna A1 - Hilbig, Martin A1 - Mauß, Fabian A1 - Klauer, Christian A1 - Pasternak, Michal A1 - Matrisciano, Andrea T1 - Systematic Reduction of Detailed Chemical Reaction Mechanisms for Engine Applications T2 - ASME 2016 Internal Combustion Engine Division Fall Technical Conference Greenville, South Carolina, USA, October 9–12, 2016 N2 - In this work we apply a sequence of concepts for mechanism reduction on one reaction mechanism including novel quality control. We introduce a moment based accuracy rating method for species profiles. The concept is used for a necessity based mechanism reduction utilizing 0D reactors. Thereafter a stochastic reactor model (SRM) for internal combustion engines is applied to control the quality of the reduced reaction mechanism during the expansion phase of the engine. This phase is sensitive on engine out emissions, and is often not considered in mechanism reduction work. The proposed process allows to compile highly reduced reaction schemes for CFD application for internal combustion engine simulations. It is demonstrated that the resulting reduced mechanisms predict combustion and emission formation in engines with accuracies comparable to the original detailed scheme. KW - Systematic Reduction KW - Chemical Reaction Mechanismus for Engine Applications Y1 - 2016 SN - 978-0-7918-5050-3 N1 - Paper No. ICEF2016-9304 PB - The American Society of Mechanical Engineers CY - New York, N.Y. ER - TY - THES A1 - Pasternak, Michal T1 - Simulation of the Diesel Engine Combustion Process Using the Stochastic Reactor Model KW - Diesel engine KW - Non-premixed combustion KW - Stochastic reactor model KW - Probability density function method KW - Numerical engine simulation KW - Turbulence-chemistry interactions Y1 - 2016 SN - 978-3-8325-4310-5 PB - Logos Verlag Berlin CY - Berlin ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Klauer, Christian A1 - Perlman, Cathleen A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Engine Knock Prediction and Evaluation Based on Detonation Theory Using a Quasi-Dimensional Stochastic Reactor Mode T2 - SAE technical paper KW - Engine Knock Prediction and Evaluation Based Y1 - 2017 U6 - https://doi.org/10.4271/2017-01-0538 SN - 0096-5170 SN - 0148-7191 IS - 2017-01-0538 SP - 11 Seiten ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Lehtiniemi, Harry A1 - Perlman, Cathleen A1 - Ravet, Frédéric ED - Leipertz, Alfred ED - Fröba, Andreas Paul T1 - 3D CFD Engine Knock Predication and Evaluation Based on Detailed Chemistry and Detonation Theory T2 - Motorische Verbrennung : aktuelle Probleme und moderne Lösungsansätze, XIII. Tagung im Haus der Technik Ludwigsburg, 16.-17. März 2017 KW - 3D CFD Engine Knock Y1 - 2017 SN - 978-3-945806-08-1 PB - ESYTEC Energie- und Systemtechnik GmbH CY - Erlangen ER -