TY - CHAP A1 - Garifullin, Marsel A1 - Launert, Benjamin A1 - Heinisuo, Markku A1 - Pasternak, Hartmut A1 - Mela, Kristo A1 - Pajunen, Sami T1 - Effect of Welding Residual Stresses on Behavior of Tubular T Joints T2 - 17th International Conference on Computing in Civil and Building Engineering N2 - Welded tubular joints are widely used in structural engineering due to their excellent resistance and stiffness, as well as simple connection. However, the welding process induces residual stresses in the welding area that can affect the structural behavior of joints. Currently very few papers investigate welding residual stresses in relation to tubular joints. This paper develops a finite element model of rectangular hollow section T joints considering welding residual stresses. Attention is paid particularly to welding sequences. The developed model is used to evaluate the effect of welding residual stresses on the resistance and initial stiffness of tubular joints. The results show that welding residual stresses increase the plastic resistance of rectangular hollow section joints under in-plane bending and axial brace loading. Y1 - 2018 UR - http://programme.exordo.com/icccbe2018/delegates/presentation/267/ UR - https://icccbe2018.exordo.com/files/papers/104/final_draft/Effect_of_Welding_Residual_Stresses_on_Behavior_of_Tubular_T_Joints.pdf ER - TY - CHAP A1 - Zivaljevic-Luxor, Natasa A1 - Pasternak, Hartmut T1 - Roofs for archaeological sites integration into public space of metropolitan area T2 - International Scientific Conference, Nis, Serbia, 31.08-01-09.2018 Y1 - 2018 UR - https://www.b-tu.de/fg-stahlbau/publikationen/veroeffentlichungen ER - TY - CHAP A1 - Jäger-Cañás, Andreas A1 - Pasternak, Hartmut T1 - On the buckling behavior of ring-stiffened shells under axial compression T2 - 8th International Conference on Thin-Walled Structures, ICTWS 2018, Lisbon, Portugal, July 24-27, 2018 Y1 - 2018 UR - https://www.b-tu.de/fg-stahlbau/publikationen/veroeffentlichungen ER - TY - CHAP A1 - Loebjinski, Maria A1 - Rug, Wolfgang A1 - Pasternak, Hartmut ED - Rug, Wolfgang T1 - Aktuelle Normen für den Bestandsbau mit Holz und beispielhafte Zuverlässigkeitsuntersuchungen T2 - Holzbau im Bestand - historische Holztragwerke : Beispiele für substanzschonende Erhaltung Y1 - 2018 SN - 978-3-410-28175-7 SP - 162 EP - 192 PB - Beuth Verlag CY - Berlin ER - TY - CHAP A1 - Loebjinski, Maria A1 - Rug, Wolfgang A1 - Pasternak, Hartmut T1 - Possibilities for a modification of partial safety factors for existing timber structures T2 - World Conference on Timber Engineering, Seoul, 20 - 23 Aug 2018 Y1 - 2018 UR - https://indico.conference4me.psnc.pl/event/171/session/347/contribution/136/material/paper/1.pdf ER - TY - CHAP A1 - Partov, Doncho A1 - Pasternak, Hartmut A1 - Grekov, Petar A1 - Nikolov, Radoslav A1 - Dimitrova, Antoaneta T1 - About the Theory of Orthotropic Steel Plate Established by Wilhelm Cornelius and its Application for Analysis of Two Steel Bridges With Orthotropic Decks in Varna T2 - X Jubilee International Scientific Conference „Civil Engineering Design and Construction“, Sept. 20-22, 2018, Varna, Bulgaria Y1 - 2018 UR - https://www.b-tu.de/fg-stahlbau/publikationen/veroeffentlichungen SP - 469 EP - 481 ER - TY - CHAP A1 - Loebjinski, Maria A1 - Köhler, Jochen A1 - Rug, Wolfgang A1 - Pasternak, Hartmut ED - Caspeele, Robby ED - Taerwe, Luc ED - Frangopol, Dan M. T1 - Development of an optimization-based and practice orientated assessment scheme for the evaluation of existing timber structures T2 - Life-Cycle Analysis and Assessment in Civil Engineering: Towards an Integrated Vision Y1 - 2019 SN - 978-1-138-62633-1 SN - 978-1-315-22891-4 SP - 353 EP - 360 PB - Taylor & Francis Group CY - London ER - TY - CHAP A1 - Stapelfeld, Christoph A1 - Launert, Benjamin A1 - Pasternak, Hartmut A1 - Doynov, Nikolay A1 - Michailov, Vesselin ED - Seefeldt, Marc T1 - Strength Calculation of Stiffened Structures Taking Into Consideration Realistic Weld Imperfections T2 - European Conference on Residual Stresses 2018, ECRS-10, Leuven, Belgium, 11-14th September, 2018 N2 - The topic of this article is the application of an analytical numerical hybrid model for a realistic prediction of imperfections induced by welds. At the beginning, the analytical model, its physical basis as well as the physical interrelationships are explained. This is followed by the explanation of the coupling procedure between the analytical model and the numerical calculation. Afterwards, the coupled hybrid model is applied on the investigated stiffened curved structure for the determination of the weld imperfections. An ultimate load analysis gives information about the load carrying behavior under axial loading. The results are compared against the traditional approach using eigenmode-based imperfections. The comparison underlines the potential additional utilization of load bearing capacity by this new approach. Y1 - 2018 SN - 978-1-945291-88-3 SN - 978-1-945291-89-0 U6 - https://doi.org/10.21741/9781945291890-39 SP - 245 EP - 250 PB - Materials Research Forum LLC CY - Millersville, PA ER - TY - GEN A1 - Zebinger, Markus A1 - Gierat, Marek A1 - Pasternak, Hartmut A1 - Krausche, Thomas T1 - Das Seilnetzdach der Schierker Feuerstein Arena im Harz Teil 2: Herstellung, Montage und Schweißsimulation T2 - Bauingenieur N2 - Die Stadt Wernigerode in Sachsen-Anhalt errichtete im Ortsteil Schierke eine Multifunktionsarena. Am Fuße des Brockens, dem höchsten Berg des Harzes und ganz Norddeutschlands gelegen, fügt sich die offene Überdachung in die vorhandene Topologie nahtlos ein. Das unter Denkmalschutz stehende Natureisstadion, mit seinen bestehenden Natursteinterrassen und einem Schiedsrichterturm aus Holz, wurde baulich so konzipiert, dass die Arena in den Wintermonaten als überdachte Kunsteisbahn und im Sommer als Fläche für Konzerte, Aufführungen und Sportveranstaltungen genutzt werden kann. Eine ganz besondere Herausforderung war die Herstellung und Montage des circa 190m langen geschweißten Stahlrandträgers. Der Hohlkasten besteht aus vier doppelt gekrümmten Blechen und lagert an lediglich zwei Fußpunkten auf. Der zweite Teil des Beitrags befasst sich mit Schweißeigenspannungen an einem ausgewählten Querschnitt der Überdachung. Y1 - 2018 SN - 0005-6650 VL - 93 IS - 10 SP - 383 EP - 391 ER - TY - GEN A1 - Stapelfeld, Christoph A1 - Launert, Benjamin A1 - Pasternak, Hartmut A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Traglastberechnung versteifter Platten und Schalen unter Berücksichtigung realer Schweißimperfektionen T2 - Bauingenieur N2 - Imperfektionen, die bei Traglastberechnungen Berücksichtigung finden müssen, haben ihre Ursachen in Herstellungs- und Fertigungstoleranzen oder werden durch das Schweißen und den damit zumeist einhergehenden Nachbehandlungen in den Bauteilen hervorgerufen. Durch die Wärmewirkung des Schweißens entstehen sowohl sehr große Verformungen als auch signifikante Zug und Druckspannungen. Der strukturelle und geometrische Imperfektionsgrad wird somit maßgeblich von der Anzahl und der Lage der Schweißnähte sowie den Schweißparametern bestimmt. Für die Berücksichtigung in Traglastberechnungen ist ein physikalisch fundiertes Modell erforderlich, welches die Schweißimperfektionen schnell und präzise berechnet. Das gekoppelte analytisch numerische Hybridmodell erfüllt diese Kriterien. Die mathematischen Grundlagen des analytischen Modells sowie die Kopplung mit der numerischen Finite-Elemente-Berechnung werden eingangs vorgestellt und die Anwendung zur Berechnung von Verzügen an einer Schiffsektion demonstriert. Darauffolgend wird das Hybridmodell an einer eben und einer gekrümmten versteiften Platte zur Berechnung der Schweißimperfektionen angewendet. Anschließende Traglastberechnungen sowie der Vergleich mit den Ergebnissen unter der Annahme einer geometrischen Ersatzimperfektion in Form des kritischsten Eigenwerts gibt Auskunft darüber, welches Potenzial die realitätsnahe direkte Berücksichtigung von Schweißimperfektionen birgt. Y1 - 2018 SN - 0005-6650 VL - 93 IS - 10 SP - 403 EP - 411 ER - TY - CHAP A1 - Li, Zheng A1 - Pasternak, Hartmut A1 - Partov, Doncho ED - Jendželovský, Norbert ED - Grmanová, Alžbeta T1 - Influence of statistical size effect in steel on structural safety T2 - Proceedings of 16th International Conference on New Trends in Statics and Dynamics of Buildings N2 - This paper present the investigation of the statistical size effect in steel structure and the corresponding reliability. This study described the randomness of material properties through two different ways. These two proposed simulation methods, which are an extension and supplement to traditional simulation methods, can effectively simulate the statistical size effect for the tensile and flexural components in steel structures. The test results show that the variations of the yield and tensile strength increase with the decreasing specimen volume. Besides, the structural component strength is not only related to the specimen volume, but also the stress distribution. It is found by studying the influence of statistical size effect on structural reliability that the strength, which is obtained by small specimens through statistical analysis in the laboratory, is no more accurately applicable to large construction. The core idea is that the stochastic material proper-ties are directly embedded in mechanical calculations to develop a more accurate and economical design method for steel structure. KW - Statistical size effect KW - Steel structure KW - Stochastic material model KW - Stochastic FEM KW - Structural safety Y1 - 2018 UR - http://www.newtrends.sk/dokumenty/proceedings_2018.pdf SN - 978-80-227-4845-2 PB - Slovak University of Technology CY - Bratislava ER -