TY - GEN A1 - Vinokurova, Ekaterina A1 - Knorr, Monika A1 - Efimova, Anastasia A1 - Ovchinnikov, Alexander A1 - Schmidt, Peer A1 - Büchner, Bernd A1 - Isaeva, Anna A1 - Roslova, Maria T1 - Microstructural evolution of layered K-doped RuCl3 during annealing traced by thermogravimetric analysis and 3D electron diffraction T2 - Zeitschrift für Anorgische und Allgemeine Chemie N2 - Nanoscale phase separation was induced in the K-doped RuCl3 van der Waals material by annealing, and studied with the goal to find a natural design strategy for the formation of two-dimensional architectures as an alternative to the costly and time-consuming experimental artificial growth methods. Phase conversion was traced by means of thermogravimetric analysis combined with mass spectrometry. The local crystal structure of co-existing K3Ru2Cl9 domains with the sizes of about 100 nm was solved by 3D electron diffraction. KW - 2D layered compounds KW - Chemical vapor transport KW - Crystal growth KW - Crystal structure KW - Halides KW - Thermal analysis Y1 - 2023 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/zaac.202300141 U6 - https://doi.org/10.1002/zaac.202300141 SN - 0044-2313 SN - 1521-3749 VL - 649 IS - 19 SP - 1 EP - 8 ER - TY - RPRT A1 - Schmidt, Peer A1 - Giese, Marie A1 - Heinemann, Robert A1 - Nawdiyal, Amruta A1 - Knorr, Monika A1 - Breitkopf, Cornelia A1 - Schneegans, Marcel Felix A1 - Pinnau, Sebastian A1 - Lorenz, Tommy A1 - Mickoleit, Erik A1 - to Baben, Moritz A1 - Keuter, Philipp A1 - Müller, Michael A1 - Sergeev, Dmitry A1 - Ewaznezhad Fard, Darya A1 - Morsa, Amedeo A1 - Rhys, Dominic Jacob A1 - Yazhenskikh, Elena T1 - PCM-Screening-2 : Evaluierung eutektischer Gemische für den Einsatz als PCM : thermodynamische Modellierung und experimentelle Methoden - 2 T2 - Deutsche Forschungsberichte N2 - Durch den Einsatz von Wärme- und Kältespeichern in Gebäuden, Industrieanlagen und Kraftwerken können Lastschwankungen reduziert und die Anlageneffizienz verbessert werden. Latentwärmespeicher (PCM) ermöglichen durch Ausnutzung einer fest-flüssig Phasenumwandlung hohe Speicherdichten bei geringen Temperaturdifferenzen. Die Verfügbarkeit geeigneter und kostengünstiger PCM’s ist derzeit noch eingeschränkt. Ein Screening geeigneter Stoffsysteme zur Bildung multinärer Eutektika durch thermodynamische Modellierung der Phasengleichgewichte erlaubt fundierte Vorhersagen zur Zusammensetzung eutektischer Gemische, ihren Schmelztemperaturen und -enthalpien. Auf Basis der Literatur, umfangreicher experimenteller Untersuchungen und Simulationen wurde im Projekt eine im Temperaturbereich nicht eingeschränkte thermochemische Datenbank für das komplexe Stoffsystem Na+, K+, Ca2+, Mg2+ // Cl−, NO3−, SO4_2−, CO3_2− // H2O geschaffen, die eine Auswahl neuer PCM mit optimalen thermodynamischen Eigenschaften für spezifische Prozessanforderungen auf Basis von in Deutschland in großen Mengen verfügbaren, preiswerten Rohstoffen ermöglicht. Weiterhin wurde ein CalPhaD-basiertes Viskositätsmodell, ein Screening-Verfahren inkl. Webserver und intuitive Visualisierungsmöglichkeiten hochkomponentiger Systeme entwickelt. Mittels eines Screenings erfolgte eine Vorauswahl von potentiell als PCM geeigneten Gemischen, die umfangreich charakterisiert wurden. Auf Basis der vielversprechenden Speicherdichten und der niedrigen Materialkosten wird erwartet, dass ein oder mehrere dieser identifizierten PCMs in die Anwendung als thermische Speicher gebracht werden können. N2 - The use of heat and cold storage systems in buildings, industrial plants, and power stations can reduce load fluctuations and improve plant efficiency. Latent heat storage systems (phase change materials - PCM) enable high storage densities with low temperature differences by exploiting a solid-liquid phase transition. The availability of suitable and cost-effective PCMs is currently still limited. Screening suitable material systems for the formation of multinary eutectics through thermodynamic modeling of phase equilibria allows well-founded predictions to be made about the composition of eutectic mixtures, their melting temperatures, and enthalpies. Based on the literature, extensive experimental investigations, and simulations, the project created a thermochemical database for the complex material system Na+, K+, Ca2+, Mg2+ // Cl−, NO3−, SO4_2−, CO3_2− // H2O was created, which enables the selection of new PCMs with optimal thermodynamic properties for specific process requirements based on inexpensive raw materials available in large quantities in Germany. Furthermore, a CalPhaD-based viscosity model, a screening procedure including a web server, and intuitive visualization options for highly component systems were developed. A screening process was used to preselect mixtures potentially suitable as PCMs, which were then extensively characterized. Based on the promising storage densities and low material costs, it is expected that one or more of these identified PCMs can be put into application as thermal storage. KW - PCM KW - Latenwärmespeicher KW - Eutektische Gemische KW - Thermodynamische Daten KW - Thermodynamische Modellierung KW - Anorganische Salzhydrate KW - Anorganische Salze Y1 - 2026 UR - https://oa.tib.eu/renate/handle/123456789/29435 U6 - https://doi.org/10.34657/28504 ER -