TY - GEN A1 - Moshammer, Kai A1 - Seidel, Lars A1 - Wang, Yu A1 - Selim, Hatem A1 - Sarathy, S. Mani A1 - Mauß, Fabian A1 - Hansen, Nils T1 - Aromatic ring formation in opposed-flow diffusive 1, 3-butadiene flames T2 - Proceedings of the Combustion Institute N2 - This paper is concerned with the formation of one-and two-ring aromatic species in near atmospheric-pressure opposed-flow diffusion flames of 1, 3-butadiene (1, 3-C 4 H 6). The chemical structures of two different 1, 3-C 4 H 6/Ar–O 2/Ar flames were explored using flame-sampling molecular-beam mass spectrometry with both electron and single-photon ionization. We provide mole fraction profiles of 47 components as function of distance from the fuel outlet and compare them to chemically detailed modeling results. To this end, the hierarchically developed model described by Seidel et al.[16] has been updated to accurately comprise the chemistry of 1, 3-butadiene. Generally a very good agreement is observed between the experimental and modeling data, allowing for a meaningful reaction path analysis. With regard to the formation of aromatic species up to naphthalene, it was essential to improve the fulvene … KW - formation of one-and two-ring aromatic species Y1 - 2017 U6 - https://doi.org/10.1016/j.proci.2016.09.010 SN - 1540-7489 VL - 36 IS - 1 SP - 947 EP - 955 ER - TY - CHAP A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Zeuch, Thomas ED - Bockhorn, Henning ED - Scala, F. ED - Commodo, M. ED - Tregrossi, A. T1 - Development of a kinetic mechanism for NOx fuel interaction T2 - Proceedings, Joint Meeting of the German and Italian Sections of the Combustion Institute, 41st Meeting on Combustion, Sorrento, May 2018 N2 - This work introduces a newly developed reaction mechanism to predict fuel/NOx interaction in freely propagating, burner stabilized premixed flames, shock tubes, jet stirred reactors and plug flow reactors experiments. The study focuses on pure ammonia as fuel as well as H₂,H₂/CO, CH₄ doped with NO, NO₂ and N₂O. The kinetic scheme also focuses on the formation and consumption of nitrogen oxides at different experimental conditions. It is found that the doping with N₂O has almost no sensitivity on the H₂ chemistry, while small amount of NO₂ is enough to change the pressure dependence of H₂ auto ignition. The experiments with N₂O still show the significant influence of the chain breaking reaction H+O₂(+M)⇋HO₂(+M) on the H₂ ignition delay times, resulting in the crossing lines for the ignition delay times, which are moved at higher pressure to higher temperature. The concentration of HO₂ is decisive for the active reaction pathway in shock tube oxidation as well as in jet stirred and flow reactor. Reaction NO+HO₂⇋NO₂+OH and NO₂+H⇋NO+OH are very important because they strongly influence the inter conversion process of NO and NO₂ in jet stirred reactor and flow reactor for cases studied herein. The formation of NO in burner stabilized premixed flames is shown to demonstrate the capability of the mechanism to be integrated into mechanisms for hydrocarbon oxidation. KW - Development of a Kinetic Y1 - 2018 UR - http://www.combustion-institute.it/proceedings/XXXXI-ASICI/proceedings2018.pdf SN - 978-88-88104-22-5 PB - Associazione Sezione Italiana del Combustion Institute CY - Napoli ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Lehtiniemi, Harry A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Impact of gasoline surrogates with different fuel sensitivity (RON-MON) on knock prediction T2 - Proceedings of the 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th European Conference on Computational Fluid Dynamics ECFD 7, Glasgow, Scotland, UK June 11 – 15, 2018 KW - Impact of gasoline surrogates Y1 - 2018 UR - http://www.eccm-ecfd2018.org/frontal/docs/Ebook-Glasgow-2018-ECCM-VI-ECFD-VII.pdf SP - 906 EP - 917 ER - TY - GEN A1 - Franken, Tim A1 - Duggan, Alexander A1 - Tao, Feng A1 - Matrisciano, Andrea A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Mauß, Fabian T1 - Multi-Objective Optimization of Fuel Consumption and NOx Emissions of a heavy-duty Diesel engine using a Stochastic Reactor Model T2 - SAE technical paper N2 - Highly fuel-efficient Diesel engines, combined with effective exhaust aftertreatment systems, enable an economic and low-emission operation of heavy-duty vehicles. The challenge of its development arises from the present engine complexity, which is expected to increase even more in the future. The approved method of test bench measurements is stretched to its limits, because of the high demand for large parameter variations. The introduction of a physics-based quasi-dimensional stochastic reactor model combined with tabulated chemistry enables the simulation-supported development of these Diesel engines. The stochastic reactor model mimics mixture and temperature inhomogeneities induced by turbulence, direct injection and heat transfer. Thus, it is possible to improve the prediction of NOx emissions compared to common mean-value models. To reduce the number of designs to be evaluated during … KW - Highly fuel-efficient Diesel engines Y1 - 2019 SN - 0096-5170 SN - 0148-7191 IS - 2019-01-1173 ER - TY - GEN A1 - Malliotakis, Zisis A1 - Banyon, Colin A1 - Zhang, Kuiwen A1 - Wagnon, Scott W. A1 - Rodriguez Henriquez, Jose Juan A1 - Vourliotakis, George A1 - Keramiotis, Christos A1 - Founti, Maria A1 - Mauß, Fabian A1 - Pitz, William J. A1 - Curran, Henry J. T1 - Testing the validity of a mechanism describing the oxidation of binary n-heptane/toluene mixtures at engine operating conditions T2 - Combustion and Flame N2 - The aim of this work is to evaluate the influence of the n-heptane/toluene ratio on the reactivity of binary toluene reference fuels (TRFs), through a combined experimental and numerical work. Novel experimental ignition delay time (IDT) data of three binary TRFs of varying n-heptane/toluene ratios have been obtained in a high-pressure shock tube and in a rapid compression machine at conditions relevant to novel engine operation. Measurements have been performed at two pressures (10 and 30 bar), and at three fuel/air equivalence ratios (0.5, 1.0 and 2.0) for TRF mixtures of 50%, 75% and 90% by volume toluene concentration, over the temperature range of 650–1450 K. It was found that, increasing the n-heptane content, led to an increase in reactivity and shorter measured IDTs. Reduced sensitivity to the equivalence ratio was observed at high temperatures, especially for high toluene content mixtures. A … KW - The aim of this work is to evaluate the influence of the n-heptane/toluene Y1 - 2019 U6 - https://doi.org/10.1016/j.combustflame.2018.10.024 SN - 0010-2180 VL - 199 SP - 241 EP - 248 ER - TY - GEN A1 - Franken, Tim A1 - Klauer, Christian A1 - Kienberg, Martin A1 - Matrisciano, Andrea A1 - Mauß, Fabian T1 - Prediction of thermal stratification in an engine-like geometry using a zero-dimensional stochastic reactor model T2 - International Journal of Engine Research KW - Prediction of thermal stratification Y1 - 2019 UR - https://journals.sagepub.com/eprint/5AKgEhAVA8RDS2tQWdGK/full SN - 2041-3149 U6 - https://doi.org/10.1177/1468087418824217 SN - 1468-0874 ER - TY - GEN A1 - Werner, Adina A1 - Matrisciano, Andrea A1 - Netzer, Corinna A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Further Application of the Fast Tabulated CPV Approach Y1 - 2018 UR - https://www.researchgate.net/publication/330737537 U6 - https://doi.org/10.13140/RG.2.2.18689.71529 N1 - 1st International Conference on Smart Energy Carriers ER - TY - GEN A1 - Werner, Adina A1 - Netzer, Corinna A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Matrisciano, Andrea A1 - Seidel, Lars A1 - Mauß, Fabian T1 - A Computationally Efficient Combustion Progress Variable (CPV) Approach for Engine Applications KW - (CPV) Approach for Engine Applications Y1 - 2018 U6 - https://doi.org/10.13140/RG.2.2.15334.27209 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Kinetic Modeling of NOx Formation and Consumption during Methanol and Ethanol Oxidation T2 - Combustion Science and Technology KW - Kinetic Modeling of NOx Formation Y1 - 2019 U6 - https://doi.org/10.1080/00102202.2019.1606804 SN - 1563-521X VL - 191 IS - 9 SP - 1628 EP - 1660 ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Impact of the surrogate formulation on 3D CFD engine knock prediction using detailed chemistry T2 - Fuel N2 - For engine knock prediction, surrogate fuels are often composed of iso-octane and n-heptane since they are the components of the Primary Reference Fuel (PRF). By definition, a PRF has no octane sensitivity (S = RON-MON). However, for a commercial gasoline fuel holds RON > MON and therefor S > 0. More complex surrogates are Toluene Reference Fuels (TRF) and Ethanol containing Toluene Reference Fuels (ETRF). In this work, the impact of the surrogate formulation on the prediction of flame propagation and auto-ignition in the unburnt gases are investigated. The surrogates are composed such that the Research Octane Number is the same. The auto-ignition events ahead of the flame front are predicted using 3D CFD and a combustion model based on the ETRF mechanism by Seidel (2017). The strength of the auto-ignition is determined using the detonation diagram by Bradley and co-workers (2002, 2003). Applying the different surrogates, ignition kernels of different size and reactivity are predicted. The results indicate a dependency on the local temperature history and the low temperature chemistry of the fuel species. The comparison of homogenous constant volume reactor and transient simulations show that the analysis of ignition delay time and octane rating solely from homogenous simulations is not sufficient if the knock tendency of a surrogate in engine simulations needs to be characterized. Y1 - 2019 U6 - https://doi.org/10.1016/j.fuel.2019.115678 SN - 1873-7153 VL - Volume 254 ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Assessment of the validity of RANS knock prediction using the resonance theory T2 - International Journal of Engine Research N2 - Following the resonance theory by Bradley and co-workers, engine knock is a consequence of an auto-ignition in the developing detonation regime. Their detonation diagram was developed using direct numerical simulations and was applied in the literature to engine knock assessment using large eddy simulations. In this work, it is analyzed if the detonation diagram can be applied for post-processing and evaluation of predicted auto-ignitions in Reynolds-averaged Navier–Stokes simulations even though the Reynolds-averaged Navier–Stokes approach cannot resolve the fine structures resolved in direct numerical simulations and large eddy simulations that lead to the prediction of a developing detonation. For this purpose, an engine operating point at the knock limit spark advance is simulated using Reynolds-averaged Navier–Stokes and large eddy simulations. The combustion is predicted using the G-equation and the well-stirred reactor model in the unburnt gases based on a detailed gasoline surrogate reaction scheme. All the predicted ignition kernels are evaluated using the resonance theory in a post-processing step. According to the different turbulence models, the predicted pressure rise rates and gradients differ. However, the predicted ignition kernel sizes and imposed gas velocities by the auto-ignition event are similar, which suggests that the auto-ignitions predicted by Reynolds-averaged Navier–Stokes simulations can be given a meaningful interpretation within the detonation diagram. Y1 - 2020 U6 - https://doi.org/10.1177/1468087419846032 SN - 2041-3149 SN - 1468-0874 VL - 21 IS - 4 SP - 610 EP - 621 ER - TY - GEN A1 - Netzer, Corinna A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Computationally efficient prediction of cycle-to-cycle variations in spark-ignition engines T2 - International Journal of Engine Research N2 - Cycle-to-cycle variations are important to consider in the development of spark-ignition engines to further increase fuel conversion efficiency. Direct numerical simulation and large eddy simulation can predict the stochastics of flows and therefore cycle-to-cycle variations. However, the computational costs are too high for engineering purposes if detailed chemistry is applied. Detailed chemistry can predict the fuels’ tendency to auto-ignite for different octane ratings as well as locally changing thermodynamic and chemical conditions which is a prerequisite for the analysis of knocking combustion. In this work, the joint use of unsteady Reynolds-averaged Navier–Stokes simulations for the analysis of the average engine cycle and the spark-ignition stochastic reactor model for the analysis of cycle-to-cycle variations is proposed. Thanks to the stochastic approach for the modeling of mixing and heat transfer, the spark-ignition stochastic reactor model can mimic the randomness of turbulent flows that is missing in the Reynolds-averaged Navier–Stokes modeling framework. The capability to predict cycle-to-cycle variations by the spark-ignition stochastic reactor model is extended by imposing two probability density functions. The probability density function for the scalar mixing time constant introduces a variation in the turbulent mixing time that is extracted from the unsteady Reynolds-averaged Navier–Stokes simulations and leads to variations in the overall mixing process. The probability density function for the inflammation time accounts for the delay or advancement of the early flame development. The combination of unsteady Reynolds-averaged Navier–Stokes and spark-ignition stochastic reactor model enables one to predict cycle-to-cycle variations using detailed chemistry in a fraction of computational time needed for a single large eddy simulation cycle. Y1 - 2020 U6 - https://doi.org/10.1177/1468087419856493 SN - 2041-3149 SN - 1468-0874 VL - 21 IS - 4 SP - 649 EP - 663 ER - TY - GEN A1 - Franken, Tim A1 - Netzer, Corinna A1 - Mauß, Fabian A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Borg, Anders A1 - Lehtiniemi, Harry A1 - Matrisciano, Andrea A1 - Kulzer, André Casal T1 - Multi-objective optimization of water injection in spark-ignition engines using the stochastic reactor model with tabulated chemistry T2 - International Journal of Engine Research N2 - Water injection is investigated for turbocharged spark-ignition engines to reduce knock probability and enable higher engine efficiency. The novel approach of this work is the development of a simulation-based optimization process combining the advantages of detailed chemistry, the stochastic reactor model and genetic optimization to assess water injection. The fast running quasi-dimensional stochastic reactor model with tabulated chemistry accounts for water effects on laminar flame speed and combustion chemistry. The stochastic reactor model is coupled with the Non-dominated Sorting Genetic Algorithm to find an optimum set of operating conditions for high engine efficiency. Subsequently, the feasibility of the simulation-based optimization process is tested for a three-dimensional computational fluid dynamic numerical test case. The newly proposed optimization method predicts a trade-off between fuel efficiency and low knock probability, which highlights the present target conflict for spark-ignition engine development. Overall, the optimization shows that water injection is beneficial to decrease fuel consumption and knock probability at the same time. The application of the fast running quasi-dimensional stochastic reactor model allows to run large optimization problems with low computational costs. The incorporation with the Non-dominated Sorting Genetic Algorithm shows a well performing multi-objective optimization and an optimized set of engine operating parameters with water injection and high compression ratio is found. KW - Water Injection KW - Genetic Optimization KW - Spark Ignition Engine KW - Stochastic Reactor Model KW - Detailed Chemistry Y1 - 2019 UR - https://journals.sagepub.com/doi/full/10.1177/1468087419857602 U6 - https://doi.org/10.1177/1468087419857602 SN - 2041-3149 VL - 20 IS - 10 SP - 1089 EP - 1100 ER -