TY - CHAP A1 - Lovas, Terese A1 - Blurock, Edward S. A1 - Mauß, Fabian ED - Bathe, Klaus-Jürgen T1 - Towards Dynamically Reduced Mechanisms based on Domain Splitting T2 - Computational fluid and solid mechanics 2003, proceedings Second MIT Conference on Computational Fluid and Solid Mechanics, June 17 - 20, 2003 Y1 - 2003 SN - 978-0-08-044046-0 SP - 1430 EP - 1433 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - CHAP A1 - Blurock, Edward S. A1 - Lovas, Terese A1 - Mauß, Fabian T1 - Steady State Reduced Mechanisms based on Domain Splitting T2 - Proceedings of the 19th International Conference on the Dynamics of Explosions and Reactive Systems, Hakone, July 27 - August 1, 2003 Y1 - 2003 N1 - CD-ROM CY - Hakone ER - TY - CHAP A1 - Lovas, Terese A1 - Blurock, Edward S. A1 - Mauß, Fabian T1 - Automatic Reduced Mechanisms based on Domain Splitting Methods T2 - Proceedings of the European Combustion Meeting "ECM 2003", Orléans, France, October 25-28, 2003 Y1 - 2003 N1 - CD-ROM CY - Orléans ER - TY - CHAP A1 - Ahmed, Syed Sayeed A1 - Moréac, Gladys A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Efficient lumping technique for the automatic generation of n-heptane and iso-octane oxidation mechanism T2 - 227th ACS National meeting, Anaheim, CA, March 28-April 1, 2004 N2 - The aim of this work is to generate a semi-detailed mechanism for the oxidation of n-heptane and iso-octane mixture with 241 species and 1905 reactions and to optimize it for the different engine operating conditions to cover the full range of temperature. A step wise efficient lumping strategy for different reaction types combine with necessity analysis has been used for the simplification and reduction of mechanism in order to make it faster and less complex in terms of both number of reactions and species. Its validation has been done against the shock tube experimental data from Fieweger et al. for both low and high temperature regions, lean and rich fuel conditions, a range of octane numbers and pressures from 13 bar to 40 bar. In addition, the mechanism was tested using a zero dimensional Homogenous Charge Compression Ignition engine model against experiments under a range of different octane numbers and initial temperatures. Y1 - 2004 SP - 265 EP - 266 PB - American Chemical Society CY - Washington, DC ER - TY - CHAP A1 - Bellanca, R. A1 - Mauß, Fabian A1 - Wang, H. T1 - Automatic optimization of detailed kinetic mechanism for HCCI-engine simulation T2 - The 227th ACS National Meeting, Anaheim, CA, March 28-April 1, 2004 N2 - In recent years detailed kinetic models have been developed and validated for both auto ignition and laminar combustion processes. The range of validity of these models is limited by the range of physical parameters covered by the available experimental data. Often, a re-optimization of the models is necessary. Optimization of reaction models has been automated in the past for example for the development of the GRI-Mech. In this work a similar procedure has been applied to optimize a gasoline fuel reference model as developed by Curran and Westbrook for HCCI engine cases. The HCCI-process was simulated using a compressed homogeneous reactor. Computations have been carried out on a PC in a graphical user interface environment. Experimental data were collected at Lund Institute of Technology on a Volvo engine with variable compression ratio and port injection mixes of iso-octane/n-heptane. Results show that, after optimization, HCCI experiments can be predicted for the given conditions. Y1 - 2004 SP - 267 EP - 268 PB - American Chemical Society CY - Washington, DC ER - TY - CHAP A1 - Gogan, Adina A1 - Lehtiniemi, Harry A1 - Mauß, Fabian A1 - Sunden, Bengt T1 - Stochastic Reactor Model for Auto-Ignition Calculation in Spark Ignition Engines T2 - Proceedings of the European Combustion Meeting, Louvain-la-Neuve, Belgium, April 3 - 6, 2005 Y1 - 2005 N1 - CD-ROM CY - Louvain-la-Neuve ER - TY - CHAP A1 - Mauß, Fabian A1 - Lehtiniemi, Harry A1 - Netzell, Karl T1 - Calculating soot in a turbulent jet diffision flame using the unsteady flamelet model T2 - Proceedings of the European Combustion Meeting, Louvain-la-Neuve, Belgium, April 3 - 6, 2005 Y1 - 2005 N1 - CD-ROM PB - Combustion Inst. CY - Louvain-la-Neuve ER - TY - THES A1 - Mauß, Fabian T1 - Entwicklung eines kinetischen Modells der Rußbildung mit schneller Polymerisation Y1 - 1998 SN - 3-89712-152-2 N1 - Aachen, Technische Hochschule, Dissertation PB - Cuvillier Verlag CY - Göttingen ER - TY - GEN A1 - Pasternak, Michal A1 - Nakov, Galin A1 - Mauß, Fabian A1 - Lehtiniemi, Harry T1 - Aspects of 0D and 3D Modeling of Soot Formation for Diesel Engines T2 - Combustion Science and Technology Y1 - 2014 U6 - https://doi.org/10.1080/00102202.2014.935213 SN - 1563-521X SN - 0010-2202 VL - 186 IS - 10-11 SP - 1517 EP - 1535 ER - TY - CHAP A1 - Lehtiniemi, Harry A1 - Borg, Andreas A1 - Mauß, Fabian T1 - Conditional Moment Closure with a Progress Variable Approach T2 - COMODIA 2012, proceedings of the Eighth International Conference on Modeling and Diagnostics for Advanced Engine Systems, July 23 - 26, 2012, Fukuoka, Japan Y1 - 2014 SP - 548 EP - 553 PB - JSME CY - Tokyo ER - TY - CHAP A1 - Kennel, C. A1 - Mauß, Fabian A1 - Peters, Norbert ED - Peters, Norbert T1 - Reduced Kinetic Mechanisms for Premixed Propane-Air Flames T2 - Reduced kinetic mechanisms for applications in combustion systems Y1 - 1993 SN - 3-540-56372-5 SN - 978-3-540-56372-3 SP - 123 EP - 141 PB - Springer CY - Berlin [u.a.] ER - TY - CHAP A1 - Priesching, Peter A1 - Saric, Fikret A1 - Mauß, Fabian A1 - Bauer, W. A1 - Schmid, M. A1 - Leipertz, Alfred ED - Leipertz, Alfred T1 - Partikelgrößenverteilung in Dieselmotoren - Detaillierte kinetische Berechnungen und Experimentelle Untersuchungen T2 - Motorische Verbrennung, aktuelle Probleme und moderne Lösungsansätze, VII. Tagung im Haus der Technik e.V., München, 15./16. März 2005 Y1 - 2005 SN - 3-931901-36-X SP - 287 EP - 298 PB - ESYTEC Energie- u. Systemtechnik CY - Erlangen ER - TY - CHAP A1 - Pasternak, Michal A1 - Mauß, Fabian ED - Leipertz, Alfred T1 - Simulation von Kraftstoffeffekten unter Dieselmotorischen Bedingungen mittels eines OD Kraftstoff-Versuchsstandes T2 - Motorische Verbrennung, aktuelle Probleme und moderne Lösungsansätze XI. Tagung im Haus der Technik e.V., Ludwigsburg, 14./15. März 2013 Y1 - 2013 SN - 978-3-931901-87-5 SP - 337 EP - 346 PB - ESYTEC Energie- u. Systemtechnik CY - Erlangen ER - TY - CHAP A1 - Lehtiniemi, Harry A1 - Borg, Andreas A1 - Mauß, Fabian ED - Leipertz, Alfred T1 - Konditionierte Momenten-Schließung mit einem Fortschritts-Variablen-Ansatz T2 - Motorische Verbrennung, aktuelle Probleme und moderne Lösungsansätze XI. Tagung im Haus der Technik e.V., Ludwigsburg, 14./15. März 2013 Y1 - 2013 SN - 978-3-931901-87-5 SP - 347 EP - 358 PB - ESYTEC Energie- u. Systemtechnik CY - Erlangen ER - TY - CHAP A1 - Lehtiniemi, Harry A1 - Borg, Andreas A1 - Mauß, Fabian T1 - Conditional Moment Closure with a Progress Variable Approach T2 - Engine processes Y1 - 2013 SN - 978-3-8169-3222-2 SP - 100 EP - 111 PB - Expert Verlag CY - Renningen ER - TY - CHAP A1 - Pasternak, Michal A1 - Mauß, Fabian ED - Sens, Marc ED - Baar, Roland T1 - Aspects of Diesel Engine In-Cylinder Processes Simulation Using 0D Stochastic Reactor Model T2 - Engine processes Y1 - 2013 SN - 978-3-8169-3222-2 SP - 139 PB - Expert Verlag CY - Renningen ER - TY - GEN A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Sens, Marc A1 - Riess, Michael A1 - Benz, Andreas A1 - Stapf, Karl Georg T1 - Gasoline Engine Simulations Using a Zero-Dimensional Spark Ignition Stochastic Reactor Model and Three-Dimensional Computational Fluid Dynamics Engine Model T2 - International Journal of Engine Research N2 - A simulation process for spark ignition gasoline engines is proposed. The process is based on a zero-dimensional spark ignition stochastic reactor model and three-dimensional computational fluid dynamics of the cold in-cylinder flow. The cold flow simulations are carried out to analyse changes in the turbulent kinetic energy and its dissipation. From this analysis, the volume-averaged turbulent mixing time can be estimated that is a main input parameter for the spark ignition stochastic reactor model. The spark ignition stochastic reactor model is used to simulate combustion progress and to analyse auto-ignition tendency in the end-gas zone based on the detailed reaction kinetics. The presented engineering process bridges the gap between three-dimensional and zero-dimensional models and is applicable to various engine concepts, such as, port-injected and direct injection engines, with single and multiple spark plug technology. The modelling enables predicting combustion effects and estimating the risk of knock occurrence at different operating points or new engine concepts for which limited experimental data are available. KW - Spark Ignition Engine, Engine Knock, Stochastic Reactor Model Y1 - 2016 U6 - https://doi.org/10.1177/1468087415599859 SN - 1468-0874 VL - 17 IS - 1 SP - 76 EP - 85 ER - TY - GEN A1 - Locci, Carlo A1 - Colin, Olivier A1 - Poitou, Damien A1 - Mauß, Fabian T1 - A tabulated, flamelet based no model for large eddy simulations of non premixed turbulent jets with enthalpy loss T2 - Flow, Turbulence and Combustion N2 - Three LES models devoted to the NO prediction in under-adiabatic furnaces are evaluated in this paper: the NORA (NO relaxation Approach) model, based on the NO relaxation towards equilibrium, the linear model (LM) which employs a linear relation to rescale the NO consumption rate, and a new model, DF-NORA, in which the linear approximation of the LM is replaced by a tabulation of the reaction rate as a function of a NO progress variable. To generate this table, NO relaxation complex chemistry calculations are used like in NORA, but the homogeneous reactor is replaced by a steady laminar diffusion flame. These models are validated on Sandia Flame D and on the flameless case of Verissimo et al. (Ener. Fuel. 25, 2469-2480 ([32])). For both cases, NORA underpredicts the NO production due to its insensitivity to strain, while LM overpredicts NO by a factor 2 on Flame D and a factor 13 on the flameless case. DF-NORA presents the best prediction with a maximal underprediction of 30% on Flame D and an over-prediction of 30% on the final NO yield of the flameless case. The impact of a radiative source term is also assessed on Flame D, showing a local decrease of NO by less than 7% compared to the adiabatic calculation for the DF-NORA model. KW - Flameless Combustion, Large Eddy Simulations, NO modeling, Tabulation Y1 - 2015 U6 - https://doi.org/10.1007/s10494-014-9591-z SN - 1386-6184 VL - 94 IS - 4 SP - 691 EP - 729 ER - TY - GEN A1 - Seidel, Lars A1 - Moshammer, Kai A1 - Wang, Xiaoxiao A1 - Zeuch, Thomas A1 - Kohse-Höinghaus, Katharina A1 - Mauß, Fabian T1 - Comprehensive kinetic modeling and experimental study of a fuel-rich, premixed n-heptane flame T2 - Combustion and Flame N2 - An existing comprehensive kinetic hydrocarbon oxidation model has been augmented and revised for a detailed analysis of n-heptane flame chemistry. The analysis was enabled by experiments in which the detailed species composition in a fuel-rich flat premixed (ϕ=1.69) n-heptane flame at 40mbar has been studied by flame-sampling molecular-beam mass spectrometry using electron impact ionization. Mole fraction profiles of more than 80 different species have been measured and compared against the new detailed kinetic model consisting of 349 species and 3686 elementary reactions. For all major products and most of the minor intermediates, a good agreement of the modeling results with the experimentally-observed mole fraction profiles has been found. The presence of low- and intermediate-temperature chemistry close to the burner surface was consistently observed in the experiment and the simulation. With the same kinetic model, n-heptane auto-ignition timing, flame speeds and species composition in a jet-stirred reactor have been successfully simulated for a broad range of temperatures (500-2000K) and pressures (1-40bar). The comprehensive nature and wide applicability of the new model were further demonstrated by the examination of various target experiments for other C1 to C7 fuels. KW - Hydrocarbon Oxidation Mechanism, Low Pressure Flame, Molecular-beam Spectrometry, n-Heptane, Soot Precursors Y1 - 2015 U6 - https://doi.org/10.1016/j.combustflame.2015.01.002 SN - 0010-2180 VL - 162 IS - 5 SP - 2045 EP - 2058 ER - TY - GEN A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Xavier, Fabio A1 - Riess, Michael A1 - Sens, Marc A1 - Benz, Andreas T1 - 0D/3D Simulations of Combustion in Gasoline Engines Operated with Multiple Spark Plug Technology T2 - SAE Technical Papers N2 - A simulation method is presented for the analysis of combustion in spark ignition (SI) engines operated at elevated exhaust gas recirculation (EGR) level and employing multiple spark plug technology. The modeling is based on a zero-dimensional (0D) stochastic reactor model for SI engines (SI-SRM). The model is built on a probability density function (PDF) approach for turbulent reactive flows that enables for detailed chemistry consideration. Calculations were carried out for one, two, and three spark plugs. Capability of the SI-SRM to simulate engines with multiple spark plug (multiple ignitions) systems has been verified by comparison to the results from a three-dimensional (3D) computational fluid dynamics (CFD) model. Numerical simulations were carried for part load operating points with 12.5%, 20%, and 25% of EGR. At high load, the engine was operated at knock limit with 0%, and 20% of EGR and different inlet valve closure timing. The quasi-3D treatment of combustion chamber geometry and the spherical flame propagation by the 0D SI-SRM enabled for estimating the impact of number of spark plugs on the combustion progress and the risk of knock occurrence. Application of three spark plugs shortened significantly the combustion process. When the engine was operated at knock limit and with 20% EGR, combustion duration was similar to that of engine operation without EGR and with one spark plug. Overall, the results presented demonstrate that this method has the potential to support early stages of engine development with limited experimental data available. KW - Spark Igniton Engine, Multiple Spark Plug Technology, Stochastic Reactor Modeling Y1 - 2015 U6 - https://doi.org/10.4271/2015-01-1243 SN - 0148-7191 SN - 0096-5170 IS - 2015-01-1243 ER - TY - GEN A1 - Matrisciano, Andrea A1 - Borg, Anders A1 - Perlman, Cathleen A1 - Lehtiniemi, Harry A1 - Pasternak, Michal A1 - Mauß, Fabian T1 - Soot Source Term Tabulation Strategy for Diesel Engine Simulations with SRM T2 - SAE Technical Papers N2 - In this work a soot source term tabulation strategy for soot predictions under Diesel engine conditions within the zero-dimensional Direct Injection Stochastic Reactor Model (DI-SRM) framework is presented. The DI-SRM accounts for detailed chemistry, in-homogeneities in the combustion chamber and turbulence-chemistry interactions. The existing implementation [1] was extended with a framework facilitating the use of tabulated soot source terms. The implementation allows now for using soot source terms provided by an online chemistry calculation, and for the use of a pre-calculated flamelet soot source term library. Diesel engine calculations were performed using the same detailed kinetic soot model in both configurations. The chemical mechanism for n-heptane used in this work is taken from Zeuch et al. [2] and consists of 121 species and 973 reactions including PAH and thermal NO chemistry. The engine case presented in [1] is used also for this work. The case is a single-injection part-load passenger car Diesel engine with 27 % EGR fueled with regular Diesel fuel. The two different approaches are analyzed and a detailed comparison is presented for the different soot processes globally and in the mixture fraction space. The contribution of the work presented in this paper is that a method which allows for a direct comparison of soot source terms - calculated online or retrieved from a flamelet table - without any change in the simulation setup has been developed within the SRM framework. It is a unique tool for model development. Our analysis supports our previous conclusion [1] that flamelet soot source terms libraries can be used for multi-dimensional modeling of soot formation in Diesel engines. KW - Diesel Engine, Stochastic Reactor Modeling, Particlulate Matter Y1 - 2015 U6 - https://doi.org/10.4271/2015-24-2400 SN - 0148-7191 SN - 0096-5170 IS - 2015-24-2400 SP - 1 EP - 15 ER - TY - CHAP A1 - Matrisciano, Andrea A1 - Seidel, Lars A1 - Klauer, Christian A1 - Lehtiniemi, Harry A1 - Mauß, Fabian T1 - An a priori thermodynamic data analysis based chemical lumping method for the reduction of large and multi-component chemical kinetic mechanisms T2 - 5th International Workshop on Model Reduction in Reacting Flows, Lübbenau, 2015 N2 - A chemical species lumping approach for reduction of large hydrocarbons and oxygenated fuels is presented. The methodology is based on an a priori analysis of the Gibbs free energy of the isomer species which is then used as main criteria for the evaluation of lumped group. Isomers with similar Gibbs free energy are lumped assuming they present equal concentrations when applied to standard reactor conditions. Unlike several lumping approaches found in literature, no calculation results from the primary mechanism have been employed prior to the application of our chemical lumping strategy. KW - Combustion, Mechanism Reduction Y1 - 2015 UR - www.modelreduction.net UR - http://modelreduction.net/wp-content/uploads/2015/07/5th_IWMRRF_2015.pdf ER - TY - CHAP A1 - Seidel, Lars A1 - Klauer, Christian A1 - Pasternak, Michal A1 - Matrisciano, Andrea A1 - Netzer, Corinna A1 - Hilbig, Martin A1 - Mauß, Fabian T1 - Systematic Mechanism Reduction for Engine Applications T2 - 5th International Workshop on Model Reduction in Reacting Flows, Lübbenau, 2015 N2 - In this work we apply various concepts of mechanism reduction with a PDF based method for species profile conservation. The reduction process is kept time efficient by only using 0D and 1D reactors. To account for the expansion phase in internal combustion engines a stochastic engine tool is used to validate the reduction steps. KW - Combustion, Mechanism Reduction Y1 - 2015 UR - www.modelreduction.net UR - http://modelreduction.net/wp-content/uploads/2015/07/5th_IWMRRF_2015.pdf ER - TY - CHAP A1 - Seidel, Lars A1 - Perlman, Cathleen A1 - Fröjd, Karin A1 - Klaus, Anna-Katharina A1 - Laska, Timothy A1 - Jalving, J. A1 - Mauß, Fabian ED - Seidel, Lars T1 - CPU Efficient Modelling of Biomass Gasification Using a Stochastic Reactor Approach and Chemistry Guided Reduction T2 - 22nd European Biomass Conference and Exhibition KW - Biomass Y1 - 2014 ER - TY - GEN A1 - Seidel, Lars A1 - Perlman, Cathleen A1 - Fröjd, Karin A1 - Klaus, Anna-Katharina A1 - Laska, Timothy A1 - Jalving, T. A1 - Mauß, Fabian T1 - CPU Efficient Modelling of Biomass Gasification Using a Stochastic Reactor Approach and Chemistry Guided Reduction KW - CPU Efficient Modelling Y1 - 2014 UR - http://www.loge.se/pdf/poster_BiomassConferenceBCE2014.pdf N1 - 1st International Workshop on Computational Fluid Dynamics (CFD) and biomass thermochemical Conversion SP - 1 ER - TY - CHAP A1 - Rodriguez Henriquez, Jose Juan A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Plug Flow Reactor Set-up evaluation with methane decomposition at mild conditions and overpressure T2 - Abstract book, 7th European Combustion Meeting (ECM), Budapest, Hungary, March 30-April 2 Y1 - 2015 SN - 978-963-12-1257-0 ER - TY - CHAP A1 - Matrisciano, Andrea A1 - Seidel, Lars A1 - Klauer, Christian A1 - Mauß, Fabian A1 - Lehtiniemi, Harry T1 - An a priori thermodynamic data analysis based on chemical lumping method for the reduction of large and multi-component chemical kinetic mechanisms T2 - 5th Annual Internation Workshop on Model Reduction in Reaction Flows (IWMRRF) Lübbenau, 28.06-01.07.2015, proceedings Y1 - 2015 ER - TY - CHAP A1 - Lehtiniemi, Harry A1 - Borg, Andreas A1 - Mauß, Fabian ED - Sens, Marc ED - Baar, Roland T1 - Modeling of Spray Combustion under Diesel Engine Conditions T2 - Proceedings of the 2nd Conference on Engine Processes, July 2–3, 2015, Berlin, Germany KW - Modeling of Spray Combustion Y1 - 2015 SN - 978-3-7983-2768-9 SP - 217 EP - 249 PB - Universitätsverlag der TU Berlin CY - Berlin ER - TY - CHAP A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Matrisciano, Andrea ED - Sens, Marc ED - Baar, Roland T1 - Diesel Engine Performance Mapping Using Stochastic Reactor Model T2 - Proceedings of the 2nd Conference on Engine Processes, July 2–3, 2015, Berlin, Germany KW - Diesel Engine Performance Mapping Y1 - 2015 SN - 978-3-7983-2768-9 SP - 217 EP - 232 PB - Tech. Univ., Universitätsverlag CY - Berlin ER - TY - GEN A1 - Matrisciano, Andrea A1 - Pasternak, Michal A1 - Wang, Xiaoxiao A1 - Antoshkiv, Oleksiy A1 - Mauß, Fabian A1 - Berg, Peter T1 - On the Performance of Biodiesel Blends – Experimental Data and Simulations Using a Stochastic Fuel Test Bench T2 - SAE Technical Papers Y1 - 2014 U6 - https://doi.org/10.4271/2014-01-1115 SN - 0148-7191 SN - 0096-5170 IS - 2014-01-1115 SP - 1 EP - 8 ER - TY - GEN A1 - Svensson, Erik A1 - Li, Changle A1 - Shamun, Sam A1 - Johansson, Bengt A1 - Tuner, Martin A1 - Perlman, Cathleen A1 - Lehtiniemi, Harry A1 - Mauß, Fabian T1 - Potential Levels of Soot, NOx , HC and CO for Methanol Combustion T2 - SAE Technical Papers N2 - Methanol is today considered a viable green fuel for combustion engines because of its low soot emissions and the possibility of it being produced in a CO2-neutral manner. Methanol as a fuel for combustion engines have attracted interest throughout history and much research was conducted during the oil crisis in the seventies. In the beginning of the eighties the oil prices began to decrease and interest in methanol declined. This paper presents the emission potential of methanol. T-Φ maps were constructed using a 0-D reactor with constant pressure, temperature and equivalence ratio to show the emission characteristics of methanol. These maps were compared with equivalent maps for diesel fuel. The maps were then complemented with engine simulations using a stochastic reactor model (SRM), which predicts end-gas emissions. The SRM was validated using experimental results from a truck engine running in Partially Premixed Combustion (PPC) mode at medium loads. The SRM was able to predict the combustion in terms of pressure trace and rate of heat release. The CO and NOx emissions were matched, however, the HC emissions were underestimated. Finally, the trajectories from the SRM simulations were superimposed on the T-Φ maps to investigate the in engine conditions. The T-Φ map analysis shows that emission of soot are non-existent, formaldehyde can be avoided and that emissions of methane are kept at, compared to diesel combustion, low levels, however CO and NOx levels are similar to diesel combustion. These results were confirmed for engine conditions by the SRM simulations and the engine experiments. KW - Potential Levels of Soot KW - Methanol Combustion Y1 - 2016 U6 - https://doi.org/10.4271/2016-01-0887 SN - 0148-7191 SN - 0096-5170 IS - 2016-01-0887 SP - 17 Seiten ER - TY - GEN A1 - Franken, Tim A1 - Mauß, Fabian T1 - Development of Methodology for Predictive Diesel Combustion Simulation Using 0D Stochastic Reactor Model T2 - SAE Technical Papers N2 - Stringent exhaust emission limits and new vehicle test cycles require sophisticated operating strategies for future diesel engines. Therefore, a methodology for predictive combustion simulation, focused on multiple injection operating points is proposed in this paper. The model is designated for engine performance map simulations, to improve prediction of NOx, CO and HC emissions.The combustion process is calculated using a zero dimensional direct injection stochastic reactor model based on a probability density function approach. Further, the formation of exhaust emissions is described using a detailed reaction mechanism for n-heptane, which involves 56 Species and 206 reactions. The model includes the interaction between turbulence and chemistry effects by using a variable mixing time profile. Thus, one is able to capture the effects of mixture inhomogeneities on NOx, CO and HC emission formation.The mixing time model is parameterized using transfer functions for engine operating parameters, e.g., injection mass, injection duration, air fuel ratio, start of injection and speed. These functions are calibrated for nine operating points using multi objective simulated annealing optimization combined with fast running metamodels that speed up the optimization process. The calibrated transfer functions are validated for nine additional operating points. The results for the calibration and validation points show a good match of the combustion heat release rate. Especially the main injection heat release rate is well predicted by the model. The NOx and CO emissions reflect the experimental trends and are in close range to the measurements. Finally, the model is tested for triple injection operating points. The results match the measurements, which show the applicability of the stochastic reactor model in conjunction with the mixing time transfer functions for engine performance map simulations. KW - Mathematical analysis KW - Diesel / Compression Ignition engines Y1 - 2016 U6 - https://doi.org/10.4271/2016-01-0566 SN - 0148-7191 SN - 0096-5170 IS - 2016-01-0566 SP - 14 Seiten ER - TY - GEN A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Mauß, Fabian T1 - Combustion Modeling of Diesel Sprays T2 - SAE Technical Papers N2 - Several models for ignition, combustion and emission formation under diesel engine conditions for multi-dimensional computational fluid dynamics have been proposed in the past. It has been recognized that the use of a reasonably detailed chemistry model improves the combustion and emission prediction especially under low temperature and high exhaust gas recirculation conditions.The coupling of the combustion chemistry and the turbulent flow can be achieved with different assumptions. In this paper we investigate a selection of n-heptane spray experiments published by the Engine Combustion Network (ECN spray H) with three different combustion models: well-stirred reactor model, transient interactive flamelet model and progress variable based conditional moment closure. All models cater for the use of detailed chemistry, while the turbulence-chemistry interaction modeling and the ability to consider local effects differ.The same chemical mechanism is used by all combustion models, which allows a comparison of ignition delay, flame stabilization and flame lift-off length between the experiments and the results from simulations using the different combustion models. The investigated parameters influence the predictions of computational fluid dynamics simulations of diesel engines. This study indicates that the most reasonable behavior with respect to ignition, flame stabilization and flame structure is predicted by the progress variable based conditional moment closure model. KW - Modeling of Diesel Sprays Y1 - 2016 U6 - https://doi.org/10.4271/2016-01-0592 SN - 0148-7191 SN - 0096-5170 IS - 2016-01-0592 SP - 1 EP - 11 ER - TY - CHAP A1 - Mauß, Fabian A1 - Matrisciano, Andrea T1 - SRM in Engines: Performance and Emissions T2 - 3rd International Combustion Institute Summer School, June 19-23, Chania, Greece KW - Stochastic Reactor Models Y1 - 2016 UR - http://iciss2016.gr/site/wp-content/uploads/2016/05/ICISS_Mauss-Matrisciano_Abstract_Tutorial.pdf ER - TY - CHAP A1 - Leon de Syniawa, Larisa A1 - Nawdiyal, A. A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Formation of C5 Species from iso-Butene T2 - Book of Abstracts, SMARTCATs 2nd General Meeting & Workshop on Smart Energy Carriers in Industry Lisbon, 14-16 November - 2016 KW - Formation of C5 Species Y1 - 2016 UR - http://media.wix.com/ugd/504c46_ad5e1606ba5c444aaa48e7a6f8a95288.pdf SP - 42 EP - 43 ER - TY - CHAP A1 - Malliotakis, Zisis A1 - Banyon, Colin A1 - Curran, Henry J. A1 - Founti, Maria A1 - Keramiotis, Christos A1 - Vourliotakis, George A1 - Koutmos, Panagiotis A1 - Paterakis, George A1 - Souflas, Konstantinos A1 - Mauß, Fabian A1 - Rodriguez Henriquez, Jose Juan A1 - Skevis, George T1 - A Comperative Study on the Oxidation of Gaseous and Liquid fuels in a Swirlstabilized Flame via Chemiluminescence Measurements T2 - Book of abtracts, COST SMARTCATs 2nd General Meeting, Lisbon, 14-16th November KW - Oxidation of Gaseous Y1 - 2016 UR - http://media.wix.com/ugd/504c46_d2c80c64c7024a84823473ecb521dc46.pdf SP - 84 EP - 85 PB - Cost, European Cooperation in Science and Technology ER - TY - CHAP A1 - Matrisciano, Andrea A1 - Borg, Anders A1 - Perlman, Cathleen A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Netzer, Corinna A1 - Mauß, Fabian A1 - Lehtiniemi, Harry T1 - Simulation of DI-Diesel combustion using tabulated chemistry approach T2 - 1st Conference on Combustion Processes in Marine and Automotive Engines, 7th - 8th June 2016, Lund, Schweden KW - Simulation of DI-Diesel Y1 - 2016 UR - http://ecco-mate.eu/images/Training%20events/LUND/ECCO-MATE_C1_Proceedings.pdf SP - 44 EP - 47 ER - TY - CHAP A1 - Seidel, Lars A1 - Netzer, Corinna A1 - Hilbig, Martin A1 - Mauß, Fabian A1 - Klauer, Christian A1 - Pasternak, Michal A1 - Matrisciano, Andrea T1 - Systematic Reduction of Detailed Chemical Reaction Mechanisms for Engine Applications T2 - ASME 2016 Internal Combustion Engine Division Fall Technical Conference Greenville, South Carolina, USA, October 9–12, 2016 N2 - In this work we apply a sequence of concepts for mechanism reduction on one reaction mechanism including novel quality control. We introduce a moment based accuracy rating method for species profiles. The concept is used for a necessity based mechanism reduction utilizing 0D reactors. Thereafter a stochastic reactor model (SRM) for internal combustion engines is applied to control the quality of the reduced reaction mechanism during the expansion phase of the engine. This phase is sensitive on engine out emissions, and is often not considered in mechanism reduction work. The proposed process allows to compile highly reduced reaction schemes for CFD application for internal combustion engine simulations. It is demonstrated that the resulting reduced mechanisms predict combustion and emission formation in engines with accuracies comparable to the original detailed scheme. KW - Systematic Reduction KW - Chemical Reaction Mechanismus for Engine Applications Y1 - 2016 SN - 978-0-7918-5050-3 N1 - Paper No. ICEF2016-9304 PB - The American Society of Mechanical Engineers CY - New York, N.Y. ER - TY - CHAP A1 - Rodriguez Henriquez, Jose Juan A1 - Keramiotis, Christos A1 - Vourliotakis, George A1 - Mauß, Fabian A1 - Founti, Maria T1 - An Experimental Investigation of the Effect of Simulated EGR on Typical Gaseous Fuels Mixtures T2 - 1st Conference on Combustion Processes in Marine and Automotive Engines, 7th - 8th June 2016, Lund, Schweden KW - Typical Gaseous Fuels Mixtures KW - Experimental Investigation Y1 - 2016 UR - http://ecco-mate.eu/images/Training%20events/LUND/ECCO-MATE_C1_Proceedings.pdf SP - 18 EP - 21 ER - TY - CHAP A1 - Rodriguez Henriquez, Jose Juan A1 - Keramiotis, Christos A1 - Vourliotakis, George A1 - Mauß, Fabian A1 - Founti, Maria ED - Krstić, Snežana ED - Cunningham, Paul T1 - An emission characterization study on a model flame fuelled with natural gas and commercial grade propane T2 - Proceedings, The MCAA Poster Session – ESOF 2016, EuroScience Open Forum – Manchester, United Kingdom, 24-27 July 2016 Y1 - 2016 SN - 978-2-9601724-2-3 SP - 27 EP - 28 PB - MCAA CY - Brussels ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Klauer, Christian A1 - Perlman, Cathleen A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Engine Knock Prediction and Evaluation Based on Detonation Theory Using a Quasi-Dimensional Stochastic Reactor Mode T2 - SAE technical paper KW - Engine Knock Prediction and Evaluation Based Y1 - 2017 U6 - https://doi.org/10.4271/2017-01-0538 SN - 0096-5170 SN - 0148-7191 IS - 2017-01-0538 SP - 11 Seiten ER - TY - GEN A1 - Matrisciano, Andrea A1 - Franken, Tim A1 - Perlman, Cathleen A1 - Borg, Anders A1 - Lehtiniemi, Harry A1 - Mauß, Fabian T1 - Development of a Computationally Efficient Progress Variable Approach for a Direct Injection Stochastic Reactor Model T2 - SAE technical papers KW - Development of a Computationally Efficient Progress Y1 - 2017 U6 - https://doi.org/10.4271/2017-01-0512 SN - 0148-7191 SN - 0096-5170 IS - 2017-01-0512 SP - 18 Seiten ER - TY - GEN A1 - Aslanjan, Jana A1 - Klauer, Christian A1 - Perlman, Cathleen A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Simulation of a Three-Way Catalyst Using Transient Single and Multi-Channel Models T2 - SAE technical paper KW - Simulation of a Three-Way Catalyst Using Y1 - 2017 U6 - https://doi.org/10.4271/2017-01-0966 SN - 0148-7191 SN - 0096-5170 IS - 2017-01-0966 ER - TY - GEN A1 - Franken, Tim A1 - Sommerhoff, Arnd A1 - Willems, Werner A1 - Matrisciano, Andrea A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Netzer, Corinna A1 - Mauß, Fabian T1 - Advanced Predictive Diesel Combustion Simulation Using Turbulence Model and Stochastic Reactor Model T2 - SAE technical paper KW - Advanced Predictive Y1 - 2017 UR - http://papers.sae.org/2017-01-0516 U6 - https://doi.org/10.4271/2017-01-0516 SN - 0148-7191 SN - 0096-5170 N1 - WCX™ 17: SAE World Congress Experience ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Lehtiniemi, Harry A1 - Perlman, Cathleen A1 - Ravet, Frédéric ED - Leipertz, Alfred ED - Fröba, Andreas Paul T1 - 3D CFD Engine Knock Predication and Evaluation Based on Detailed Chemistry and Detonation Theory T2 - Motorische Verbrennung : aktuelle Probleme und moderne Lösungsansätze, XIII. Tagung im Haus der Technik Ludwigsburg, 16.-17. März 2017 KW - 3D CFD Engine Knock Y1 - 2017 SN - 978-3-945806-08-1 PB - ESYTEC Energie- und Systemtechnik GmbH CY - Erlangen ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Klauer, Christian A1 - Perlman, Cathleen A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Impact of Gasoline Octane Rating on Engine Knock using Detailed Chemistry and a Quasi-dimensional Stochastic Reaktior Model T2 - Digital Proceedings of the 8th European Combustion Meeting (ECM 2017), Dubrovnik, Croatia Y1 - 2017 UR - https://www.researchgate.net/publication/319059022 SP - 493 EP - 498 ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Lehtiniemi, Harry A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Efficient tracking of knock onset for a wide range of fuel surrogates T2 - International Multidimensional Engine Modeling User's Group Meeting at the SAE Congress KW - Efficient tracking of knock Y1 - 2017 UR - https://www.researchgate.net/publication/319137036 ER - TY - GEN A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Klauer, Christian A1 - Matrisciano, Andrea T1 - Diesel engine performance mapping using a parametrized mixing time model T2 - International Journal of Engine Research KW - Diesel engine performance Y1 - 2018 U6 - https://doi.org/10.1177/1468087417718115 SN - 2041-3149 SN - 1468-0874 VL - 19 IS - 2 SP - 202 EP - 213 ER - TY - CHAP A1 - Aslanjan, Jana A1 - Klauer, Christian A1 - Günther, Vivien A1 - Mauß, Fabian T1 - On the Influence of Inlet Gas Variations and Gas Phase Chemistry in a Three-Way Catalyst T2 - COMODIA - The Ninth International Conference on Modeling and Diagnostics for Advanced, July 25, 2017 - July 28, 2017 N2 - The conversion effects of a three-way catalyst are simulated in previous works using single and multiple representative channel approaches with detailed surface kinetic models. In addition, this article introduces global gas phase chemistry to the model. This allows reflecting ongoing reactions due to incomplete combustion products in low temperature regime. The 1D single-channel model representative for the catalyst is used here. Next to the comparison of the catalyst outlet emissions with and without gas phase chemistry, the transient temperature increase is simulated in order to model the catalysts light off temperature. Additionally, the transient inlet emissions are enhanced to show the influence of water and hydrogen on the modeling results. The heat transfer is modeled by wall heat losses to provide proper heat dissipation out of the catalyst. The modeling results show a good agreement to the experimental data with low computational cost. Y1 - 2017 U6 - https://doi.org/10.1299/jmsesdm.2017.9.A308 ER - TY - CHAP A1 - Fischer, Michael A1 - Günther, Michael A1 - Berger, Carsten A1 - Troeger, Ralf A1 - Pasternak, Michal A1 - Mauß, Fabian ED - Günther, Michael ED - Sens, Marc T1 - Suppressing Knocking by Using CleanEGR – Better Fuel Economy and Lower Raw Emissions Simultaneously T2 - Knocking in Gasoline Engines, 5th International Conference, December 12-13, 2017, Berlin, Germany KW - Suppressing Knocking Y1 - 2018 SN - 978-3-319-69760-4 U6 - https://doi.org/10.1007/978-3-319-69760-4_21 SP - 384 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Pasternak, Michal A1 - Netzer, Corinna A1 - Mauß, Fabian A1 - Fischer, Michael A1 - Sens, Marc A1 - Riess, Michael ED - Günther, Michael ED - Sens, Marc T1 - Simulation of the Effects of Spark Timing and External EGR on Gasoline Combustion Under Knock-Limited Operation at High Speed and Load T2 - Knocking in Gasoline Engines, 5th International Conference, December 12-13, 2017, Berlin, Germany Y1 - 2018 SN - 978-3-319-69760-4 U6 - https://doi.org/10.1007/978-3-319-69760-4_8 SP - 121 EP - 142 PB - Springer International Publishing CY - Cham ER -