TY - GEN A1 - Kurapati, Vinaykumar Reddy A1 - Borg, Anders A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Fast CFD Diesel engine modelling using the 1-Dimentional SprayLet approach T2 - SAE Technical Paper N2 - In the SAE article 2023-24-0083: SprayLet: One-dimensional interactive cross-sectionally averaged spray model, we formulatet a one-dimensional Spray model in interaction with the surrounding gas phase. We could demonstrate, that the model predicted liquid and gaseous penetration length in good aggreement with ECN spray experiments. In this paper we use this model in engine CFD (CONVERGE CFD) and demonstrate a strong reduction in CPU time (50%). We can show a strong decrease in grid dependency, which allows a further reduction of CPU time (90%). We will present engine CFD simulations, comparing detailed spray with SpayLet simulations. This includes pressure traces, heat release, and emissions. Y1 - 2024 UR - https://www.sae.org/publications/technical-papers/content/2024-01-2684/ SN - 0148-7191 SN - 2688-3627 IS - 2024-01-2684 ER - TY - GEN A1 - Kurapati, Vinaykumar Reddy A1 - Borg, Anders A1 - Seidel, Lars A1 - Mauß, Fabian T1 - SprayLet: One-Dimensional Interactive Cross-Sectionally Averaged Spray Model T2 - SAE Technical Paper N2 - Spray modeling is among the main aspects of mixture formation and combustion in internal combustion engines. It plays a major role in pollutant formation and energy efficiency although adequate modeling is still under development. Strong grid dependence is observed in the droplet-based stochastic spray model commonly used. As an alternative, an interactive model called 'SprayLet' is being developed for spray simulations based on one-dimensional integrated equations for the gas and liquid phases, resulting from cross-sectionally averaging of multi-dimensional transport equations to improve statistical convergence. The formulated one-dimensional cross-section averaged system is solved independently of the CFD program to provide source terms for mass, momentum and heat transfer between the gas and liquid phases. The transport processes take place in a given spray cone where the nozzle exit is automatically resolved. In the 1D program, the conservation equations are for droplet diameter, droplet temperature, as well as for continuity and momentum of the liquid and the gaseous phase are solved. The source terms between the phases are conservatively embedded into the spray region of the CFD program. In CFD program, the transport equations are solved for gas phase only. The SprayLet model is validated using standard Sandia sprays by comparing penetration lengths and fuel mixture fractions with experimental data. Y1 - 2023 U6 - https://doi.org/10.4271/2023-24-0083 SN - 0148-7191 SN - 2688-3627 ER - TY - GEN A1 - Manna, Maria Virginia A1 - Sabia, Pino A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Ragucci, Raffaele A1 - Mauß, Fabian A1 - De Joannon, Mara T1 - NH3NO interaction at low-temperatures: an experimental and modeling study T2 - Proceedings of the Combustion Institute N2 - The present work provides new insight into NH3single bondNO interaction under low-temperature conditions. The oxidation process of neat NH3 and NH3 doped with NO (450, 800 ppm) was experimentally investigated in a Jet Stirred Flow Reactor at atmospheric pressure for the temperature range 900–1350 K. Results showed NO concentration is entirely controlled by DeNOx reactions in the temperature range 1100–1250 K, while NH3single bondNO interaction does not develop through a sensitizing NO effect, for these operating conditions. A detailed kinetic model was developed by systematically updating rate constants of controlling reactions and declaring new reactions for N2H2 isomers (cis and trans). The proposed mechanism well captures target species as NO and H2 profiles. For NH3single bondNO mixtures, NO profiles were properly reproduced through updated DeNOx chemistry, while NH2 recombination reactions were found to be essential for predicting the formation of H2. The role of ammonia as a third-body species is implemented in the updated mechanism, with remarkable effects on species predictions. For neat NH3 mixture, the reaction H+O2(+M)=HO2(+M) was crucial to predict NO formation via the reaction NH2+HO2double bondH2NO+OH. Y1 - 2023 U6 - https://doi.org/10.1016/j.proci.2022.09.027 SN - 1873-2704 VL - 39 IS - 1 SP - 775 EP - 784 ER - TY - GEN A1 - Mante, Till A1 - Prehn, Sascha A1 - Theile, Martin A1 - Seidel, Lars A1 - Mestre, Laura A1 - Buchholz, Bert A1 - Mauß, Fabian ED - Heintzel, Alexander T1 - Investigation of An Ammonia Diesel Dual-Fuel Combustion Process on a Heavy-Duty Single Cylinder Research Engine for the Development of Suitable Simulation Tools for Maritime Applications T2 - Heavy-Duty-, On- und Off-Highway-Motoren 2022 : Stand der Energiewende im Heavy-Duty-Bereich N2 - This paper discusses the adaption of a single cylinder research engine for a retrofit application with an ammonia diesel dual-fuel combustion process and the build of an ammonia fuel system. The gaseous ammonia will be injected in the air intake pipe and the premixed ammonia air mixture will enter the combustion chamber. The diesel injection is carried out via a high-pressure common rail system. All relevant parameters can be freely adjusted via a freely programmable control unit. With the help of experimental data from a single cylinder research engine at the chair of piston machines and internal combustion engines of the University of Rostock (LKV), a dual-fuel combustion model based on detailed chemistry will be developed and optimized. This model will be integrated in a full research engine model, which ensures the best possible representation of the real engine. The combustion model is being developed by LOGE Deutschland GmbH. The full research engine model is developed by FVTR GmbH. The analysis of the combustion process starts with pure diesel operating points and is successively substituted by ammonia in the course of the measurement campaigns. Both the combustion characteristics are relevant, as they significantly influence the resulting performance and engine operation, as well as the exhaust emissions, as the carbon emissions can be reduced, but the nitrogen oxides and ammonia slip increase significantly in relevance due to the ammonia. The results obtained will be used to derive initial recommendations for action and to estimate the potential for application in the inland waterway shipping. In addition, the development of the systematic simulation tools covers a broad spectrum of research questions and aims to increase the efficiency of the necessary R&D. Y1 - 2022 SN - 978-3-658-41477-1 SN - 978-3-658-41476-4 U6 - https://doi.org/10.1007/978-3-658-41477-1_3 SP - 24 EP - 39 PB - Springer Vieweg CY - Wiesbaden ER - TY - GEN A1 - Turquand d'Auzay, Charles A1 - Shapiro, Evgeniy A1 - Prouvier, Matthieu A1 - Winkler, Axel A1 - Seidel, Lars A1 - Borg, Anders A1 - Mauß, Fabian T1 - Evaluation of Fast Detailed Kinetics Calibration Methodology for 3D CFD Simulations of Spray Combustion T2 - SAE Technical Paper N2 - Meeting strict current and future emissions legislation necessitates development of computational tools capable of predicting the behaviour of combustion and emissions with an accuracy sufficient to make correct design decisions while keeping computational cost of the simulations amenable for large-scale design space exploration. While detailed kinetics modelling is increasingly seen as a necessity for accurate simulations, the computational cost can be often prohibitive, prompting interest in simplified approaches allowing fast simulation of reduced mechanisms at coarse grid resolutions appropriate for internal combustion engine simulations in design context. In this study we present a simplified Well-stirred Reactor (WSR) implementation coupled with 3D CFD Ricardo VECTIS solver. A detailed evaluation of benchmark ECN spray problem is presented demonstrating that a single point calibration of such a model using a bulk reaction multiplier approach can provide correct representation of the solution across a wide range of temperatures on grid sizes typically employed for RANS internal combustion engine simulations with tabulated kinetics or zonal combustion models. Y1 - 2022 U6 - https://doi.org/10.4271/2022-01-1042 SN - 0148-7191 SN - 0096-5170 IS - 2022-01-1042 ER - TY - GEN A1 - Van Treek, Lisa A1 - Lubrano Lavadera, Marco A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Konnov, Alexander A. T1 - Experimental and modelling study of laminar burning velocity of aqueous ethanol T2 - Fuel N2 - Laminar burning velocities of ethanol-water-air mixtures have been determined using the heat flux method. Aqueous ethanol contained 0–40% of water by mole fraction. Laminar premixed flat flames were stabilized on a perforated burner under adiabatic conditions for the equivalence ratio range from 0.7 to 1.4. Burning velocity measurements were performed for the initial gas temperature of 358 K and at atmospheric pressure. The results for ethanol-air flames are in good agreement with the previous data obtained using the same heat flux method. The present and literature experimental data were compared against predictions using four different kinetic models. All models show uniform behaviour over the range of ethanol dilution by water covered in the present study. However, model predictions significantly diverge from the experimental data obtained in spherical flames. To quantify the effect of dilution on the laminar burning velocity, an empirical dimensionless correlation has been derived from the experimental data and predictions of the models tested. Further numerical analyses were performed to identify the effects of water addition on laminar burning velocities. Results suggested that water strongly interacts with the H2/O2 and C1 oxidation/recombination routes. Y1 - 2019 U6 - https://doi.org/10.1016/j.fuel.2019.116069 SN - 1873-7153 VL - 257 ER - TY - GEN A1 - Hilbig, Martin A1 - Malliotakis, Zisis A1 - Seidel, Lars A1 - Vourliotakis, George A1 - Keramiotis, Christos A1 - Mauß, Fabian A1 - Founti, Maria T1 - The effect of base chemistry choice in a generated n‐hexane oxidation model using an automated mechanism generator T2 - International Journal of Chemical Kinetics N2 - The present study describes the utilization of a reaction mechanism generator for the development of chemical kinetic models. The aim of the investigation is twofold. The in-house developed mechanism generator is updated with reaction classes reported in the literature, and the effect of the lower hydrocarbon chemistry, that is, base chemistry, on the generation process is assessed. For this purpose, the algorithm is implemented on two different base chemistry mechanisms, that have previously been validated against a different range of hydrocarbons, that is, the mechanisms of the groups coauthoring the study. n-Hexane has been used as a modeling target due to its important role in combustion studies as a surrogate for engine and aviation applications. The steps of the generation process are given in detail as this is the first time the current algorithm is utilized. The two generated mechanisms are compared against speciation data, ignition delay times, and flame velocities from the literature. The overall agreement of the generated mechanisms is satisfying; discrepancies exist in the negative temperature coefficient regime. Reaction path analysis and sensitivity analysis were performed, revealing the reactions that cause the different mechanism performance. Among others, the study reveals that the generated schemes pose a fast and adequate alternative to literature mechanisms; it is however evident that the latter may include more detailed reaction paths and are therefore superior in terms of validation. Y1 - 2019 U6 - https://doi.org/10.1002/kin.21309 SN - 1097-4601 SN - 0538-8066 VL - 51 IS - 10 SP - 786 EP - 798 ER - TY - GEN A1 - Richter, Jana A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Reaction mechanism development and investigation on the convergence influence in a 1D catalyst model for a γ-alumina stabilized three-way catalyst T2 - The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines N2 - Accurate and computational cost-effective modeling tools for the optimization of processes and devices of all kinds are needed in nearly all scientific fields. While experimental optimization entails high expenses in terms of cost and time virtual optimization may be a promising alternative. In this work, the suitability and accuracy of a 1D heterogeneous catalytic model is investigated. First, the influence of cell discretization and residence time on the convergence in a 1D catalyst model are investigated. Second, the catalyst model is investigated and validated with use of a stoichiometric steady state three-way catalyst experiment. With the help of these investigations the reaction mechanism is further developed and new reaction rates for two reactions are presented. The modeling results are compared to a 2D simulation approach in terms of computational time and catalyst conversion behavior. The presented model is capable to capture the experimental results with a drastically reduced computational time in comparison to the 2D simulation presented in literature. Y1 - 2022 UR - https://www.jstage.jst.go.jp/article/jmsesdm/2022.10/0/2022.10_A10-3/_article/-char/en U6 - https://doi.org/10.1299/jmsesdm.2022.10.A10-3 SN - 2424-2918 ER - TY - GEN A1 - Mai, Tam V.-T. A1 - Bui, Thanh Q. A1 - Nhung, Nguyen Thi Ai A1 - Quy, Phan Tu A1 - Shrestha, Krishna Prasad A1 - Mauß, Fabian A1 - Giri, Binod Raj A1 - Huynh, Lam Kim T1 - An Ab Initio RRKM-Based Master Equation Study for Kinetics of OH-Initiated Oxidation of 2-Methyltetrahydrofuran and Its Implications in Kinetic Modeling T2 - Energies N2 - Cyclic ethers (CEs) can be promising future biofuel candidates. Most CEs possess physico-chemical and combustion indicators comparable to conventional fuels, making them suitable for internal combustion engines. This work computationally investigates the kinetic behaviors of hydrogen abstraction from 2-methyl tetrahydrofuran (2MTHF), one of the promising CEs, by hydroxyl radicals under combustion and atmospheric relevant conditions. The various reaction pathways were explored using the CCSD(T)/cc-pVTZ//M06-2X/aug-cc-pVTZ level of theory. The Rice–Ramsperger–Kassel–Marcus-based master equation (RRKM-ME) rate model, including treatments for hindered internal rotation and tunneling, was employed to describe time-dependent species profiles and pressure and temperature-dependent rate coefficients. Our kinetic model revealed that the H-abstraction proceeds via an addition-elimination mechanism forming reaction complexes at both the entrance and exit channels. Eight different reaction channels yielding five radical products were located. The reaction exhibited complex kinetics yielding a U-shaped Arrhenius behavior. An unusual occurrence of negative temperature dependence was observed at low temperatures, owing to the negative barrier height for the hydrogen abstraction reaction from the C-H bond at the vicinity of the O-atom. A shift in the reaction mechanism was observed with the dominance of the abstraction at Cα-H of 2MTHF ring (causing negative-T dependence) and at CH3 (positive-T dependence) at low and high temperatures, respectively. Interestingly, the pressure effect was observed at low temperatures, revealing the kinetic significance of the pre-reaction complex. Under atmospheric pressure, our theoretical rate coefficients showed excellent agreement with the available literature data. Our model nicely captured the negative temperature-dependent behaviors at low temperatures. Our predicted global rate coefficients can be expressed as k (T, 760 Torr) = 3.55 × 101 × T−4.72 × exp [−340.0 K/T] + 8.21 × 10−23 × T3.49 × exp [918.8 K/T] (cm3/molecule/s). Our work provides a detailed kinetic picture of the OH-initiated oxidation kinetics of 2MTHF. Hence, this information is useful for building a kinetic me chanism for methylated cyclic ethers. KW - ab initio KW - RRKM-ME calculations KW - 2-methyl tetrahydrofuran KW - OH radicals KW - kinetic modeling Y1 - 2023 U6 - https://doi.org/10.3390/en16093730 SN - 1996-1073 VL - 16 IS - 9 ER - TY - GEN A1 - Siddareddy, Reddy Babu A1 - Franken, Tim A1 - Pasternak, Michal A1 - Leon de Syniawa, Larisa A1 - Oder, Johannes A1 - Rottengruber, Hermann A1 - Mauß, Fabian T1 - Real-Time Simulation of CNG Engine and After-Treatment System Cold Start. Part 1: Transient Engine-Out Emission Prediction Using a Stochastic Reactor Model T2 - SAE Technical Paper N2 - During cold start of natural gas engines, increased methane and formaldehyde emissions can be released due to flame quenching on cold cylinder walls, misfiring and the catalyst not being fully active at low temperatures. Euro 6 legislation does not regulate methane and formaldehyde emissions. New limits for these two pollutants have been proposed by CLOVE consortium for Euro 7 scenarios. These proposals indicate tougher requirements for aftertreatment systems of natural gas engines. In the present study, a zero-dimensional model for real-time engine-out emission prediction for transient engine cold start is presented. The model incorporates the stochastic reactor model for spark ignition engines and tabulated chemistry. The tabulated chemistry approach allows to account for the physical and chemical properties of natural gas fuels in detail by using a-priori generated laminar flame speed and combustion chemistry look-up tables. The turbulence-chemistry interaction within the combustion chamber is predicted using a K-k turbulence model. The optimum turbulence model parameters are trained by matching the experimental cylinder pressure and engine-out emissions of nine steady-state operating points. Subsequently, the trained engine model is applied for predicting engine-out emissions of a WLTP passenger car engine cold start. The predicted engine-out emissions comprise nitrogen oxide, carbon monoxide, carbon dioxide, unburnt methane, formaldehyde, and hydrogen. The simulation results are validated by comparing to transient engine measurements at different ambient temperatures (-7°C, 0°C, 8°C and 20°C). Additionally, the sensitivity of engine-out emissions towards air-fuel-ratio (λ=1.0 and λ=1.3) and natural gas quality (H-Gas and L-Gas) is investigated. KW - Spark Ignition Engines KW - Gas Engines KW - Alternative Fuel Engines KW - Natural Gas KW - Nitrogen Oxides KW - Cold Start KW - Carbon Monoxide KW - Methane KW - Formaldehyde KW - Simulation KW - Stochastic Reactor Model KW - Tabulated Chemistry Y1 - 2023 U6 - https://doi.org/10.4271/2023-01-0183 SN - 2688-3627 SN - 0148-7191 ER - TY - GEN A1 - Leon de Syniawa, Larisa A1 - Siddareddy, Reddy Babu A1 - Oder, Johannes A1 - Franken, Tim A1 - Günther, Vivien A1 - Rottengruber, Hermann A1 - Mauß, Fabian T1 - Real-Time Simulation of CNG Engine and After-Treatment System Cold Start. Part 2: Tail-Pipe Emissions Prediction Using a Detailed Chemistry Based MOC Model T2 - SAE Technical Report N2 - In contrast to the currently primarily used liquid fuels (diesel and gasoline), methane (CH4) as a fuel offers a high potential for a significant reduction of greenhouse gas emissions (GHG). This advantage can only be used if tailpipe CH4 emissions are reduced to a minimum, since the GHG impact of CH4 in the atmosphere is higher than that of carbon dioxide (CO2). Three-way catalysts (TWC - stoichiometric combustion) and methane oxidation catalysts (MOC - lean combustion) can be used for post-engine CH4 oxidation. Both technologies allow for a nearly complete CH4 conversion to CO2 and water at sufficiently high exhaust temperatures (above the light-off temperature of the catalysts). However, CH4 combustion is facing a huge challenge with the planned introduction of Euro VII emissions standard, where stricter CH4 emission limits and a decrease of the cold start starting temperatures are discussed. The aim of the present study is to develop a reliable kinetic catalyst model for MOC conversion prediction in order to optimize the catalyst design in function of engine operation conditions, by combining the outputs from the predicted transient engine simulations as inputs to the catalyst model. Model development and training has been performed using experimental engine test bench data at stoichiometric conditions as well as engine simulation data and is able to reliably predict the major emissions under a broad range of operating conditions. Cold start (-7°C and +20°C) experiments were performed for a simplified worldwide light vehicle test procedure (WLTP) driving cycle using a prototype gas engine together with a MOC. For the catalyst simulations, a 1-D catalytic converter model was used. The model includes detailed gas and surface chemistry that are computed together with catalyst heat up. In a further step, a virtual transient engine cold start cycle is combined with the MOC model to predict tail-pipe emissions at transient operating conditions. This method allows to perform detailed emission investigations in an early stage of engine prototype development. KW - Exhaust Emissions KW - Tail Pipe Emissions KW - Three Way Catalyst KW - Gas Engines KW - Cold Start KW - Simulation KW - Detailed Chemistry KW - Methane Oxidation Catalyst KW - Methane KW - Co-Simulation KW - Catalysts Y1 - 2023 U6 - https://doi.org/10.4271/2023-01-0364 SN - 2688-3627 SN - 0148-7191 ER - TY - GEN A1 - Rakhi, Rakhi A1 - Günther, Vivien A1 - Mauß, Fabian T1 - A detailed surface reaction mechanism to investigate oxidation of methane over nickel catalyst T2 - Proceedings in Applied Mathematics & Mechanics : PAMM N2 - We have developed a kinetically consistent detailed surface reaction mechanism for modeling the oxidation of methane over a nickel-based catalyst. A one-dimensional model, LOGEcat based on the single-channel 1D catalyst model, is used to perform the simulations. The original multi-step reaction mechanism is thermodynamically consistent and consists of 52 reactions. By thermodynamic consistency, we mean that the equilibrium is achieved with the support of the Arrhenius parameters and does not depend on the thermochemistry of the species involved in the considered reactions. The detailed mechanism developed in this investigation contains 26 reversible reactions. These reactions are obtained with the use of the thermochemistry of the species. The study focuses on ensuring kinetic consistency and this is done with the help of thermodynamic analysis by bringing the thermochemistry of the species in play in order to develop a surface reaction mechanism. The new mechanism can be used to understand the other processes, for example, steam- and dry-reforming of methane over nickel, however, the main focus of the paper is to check the performance of the detailed mechanism for catalytic partial oxidation of methane. The applicability of the mechanism is checked for various reactor conditions in terms of parameters such as temperature and pressure by comparing the results with the available reference data. The detailed mechanism developed in this study is able to accurately express oxidation of methane over the nickel catalyst for the considered reactor conditions. Y1 - 2023 U6 - https://doi.org/10.1002/pamm.202200055 SN - 1617-7061 N1 - Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) VL - 22 IS - 1 ER - TY - GEN A1 - Rakhi, Rakhi A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Insights into dry reforming of methane over nickel catalyst using a thermodynamic model T2 - Reaction Kinetics, Mechanisms and Catalysis N2 - A thermodynamic model is developed using a one-dimensional model, LOGEcat to understand the dry reforming of methane over nickel-based catalysts. To do so, we have extended our previously developed mechanism (Rakhi and Shrestha in React Kinet, Mech Catal 135:3059–3083, 2022) which contains 21 reversible reactions by adding 5 more reversible reactions and updating the thermochemistry of one intermediate species. The adjusted mechanism contains 26 reversible reactions obtained with the help of thermodynamic analysis. This study focuses on using the thermodynamic model for dry reforming of methane and insights into the reaction pathways and sensitivity analysis for the kinetically consistent surface reaction mechanism. The applicability of the mechanism is examined for reactor conditions in terms of parameters such as temperature by comparing the results with the available reference data. The mechanism is able to accurately express the reforming conditions of methane over the nickel catalyst for complete range of temperature and also provide useful insights into the reaction pathways established with the thermodynamic model. Y1 - 2023 U6 - https://doi.org/10.1007/s11144-023-02426-8 SN - 1878-5204 SN - 1878-5190 ER - TY - GEN A1 - Siddareddy, Reddy Babu A1 - Franken, Tim A1 - Leon de Syniawa, Larisa A1 - Pasternak, Michal A1 - Prehn, Sascha A1 - Buchholz, Bert A1 - Mauß, Fabian T1 - Simulation of CNG Engine in Agriculture Vehicles. Part 1: Prediction of Cold Start Engine-Out Emissions Using Tabulated Chemistry and Stochastic Reactor Model T2 - SAE Technical Paper N2 - Worldwide, there is the demand to reduce harmful emissions from non-road vehicles to fulfill European Stage V+ and VI (2022, 2024) emission legislation. The rules require significant reductions in nitrogen oxides (NOx), methane (CH4) and formaldehyde (CH2O) emissions from non-road vehicles. Compressed natural gas (CNG) engines with appropriate exhaust aftertreatment systems such as threeway catalytic converter (TWC) can meet these regulations. An issue remains for reducing emissions during the engine cold start where the CNG engine and TWC yet do not reach their optimum operating conditions. The resulting complexity of engine and catalyst calibration can be efficiently supported by numerical models. Hence, it is required to develop accurate simulation models which can predict cold start emissions. This work presents a real-time engine model for transient engine-out emission prediction using tabulated chemistry for CNG. The engine model is based on a stochastic reactor model (SRM) which describes the in-cylinder processes of spark ignition (SI) engines including large-scale and lowscale turbulence, convective heat transfer, turbulent flame propagation and chemistry. Chemistry is described using a tabulated chemistry model which calculates the major exhaust gas emissions of CNG engines such as CO2, NOx, CO, CH4 and CH2O. By best practice, the engine model parameters are optimized by matching the experimental cylinder pressure and engine-out emissions from steady-state operating points. The engine model is trained for a non-road transient cycle (NRTC) cold start at 25°C ambient temperature and validated for a NRTC cold start at 10°C ambient temperature. The trained model is evaluated regarding their feasibility and accuracy predicting transient engineout emissions. KW - CNG engine KW - Cold start KW - Stochastic reactor model KW - Tabulated chemistry KW - Natural gas KW - Driving cycle Y1 - 2023 U6 - https://doi.org/10.4271/2023-24-0006 SN - 0148-7191 SN - 2688-3627 ER - TY - GEN A1 - Leon de Syniawa, Larisa A1 - Siddareddy, Reddy Babu A1 - Prehn, Sascha A1 - Günther, Vivien A1 - Franken, Tim A1 - Buchholz, Bert A1 - Mauß, Fabian T1 - Simulation of CNG Engine in Agriculture Vehicles. Part 2: Coupled Engine and Exhaust Gas Aftertreatment Simulations Using a Detailed TWC Model T2 - SAE Technical Paper N2 - In more or less all aspects of life and in all sectors, there is a generalized global demand to reduce greenhouse gas (GHG) emissions, leading to the tightening and expansion of existing emissions regulations. Currently, non-road engines manufacturers are facing updates such as, among others, US Tier 5 (2028), European Stage V (2019/2020), and China Non-Road Stage IV (in phases between 2023 and 2026). For on-road applications, updates of Euro VII (2025), China VI (2021), and California Low NOx Program (2024) are planned. These new laws demand significant reductions in nitrogen oxides (NOx) and particulate matter (PM) emissions from heavy-duty vehicles. When equipped with an appropriate exhaust aftertreatment system, natural gas engines are a promising technology to meet the new emission standards. Gas engines require an appropriate aftertreatment technology to mitigate additional GHG releases as natural gas engines have challenges with methane (CH4) emissions that have 28 times more global warming potential compared to CO2. Under stoichiometric conditions a three-way catalytic converter (TWC - stoichiometric combustion) can be used to effectively reduce emissions of harmful pollutants such as nitrogen oxides and carbon monoxide (CO) as well as GHG like methane. The aim of the present study is to understand the performance of the catalytic converter in function of the engine operation and coolant temperature in order to optimize the catalyst operating conditions. Different cooling temperatures are chosen as the initial device temperature highly affects the level of warm up emissions such that low coolant temperatures entail high emissions. In order to investigate the catalyst performance, experimental and virtual transient engine emissions are coupled with a TWC model to predict tail-pipe emissions at transient operating conditions. Engine experiments are conducted at two initial engine coolant temperatures (10°C and 25°C) to study the effects on the Non-Road Transient Cycle (NRTC) emissions. Engine simulations of combustion and emissions with acceptable accuracy and with low computational effort are developed using the Stochastic Reactor Model (SRM). Catalyst simulations are performed using a 1D catalytic converter model including detailed gas and surface chemistry. The initial section covers essential aspects including the engine setup, definition of the engine test cycle, and the TWC properties and setup. Subsequently, the study introduces the transient SI-SRM, 1D catalyst model, and kinetic model for the TWC. The TWC model is used for the validation of a NRTC at different coolant temperatures (10°C and 25°C) during engine start. Moving forward, the next section includes the coupling of the TWC model with measured engine emissions. Finally, a virtual engine parameter variation has been performed and coupled with TWC simulations to investigate the performance of the engine beyond the experimental campaign. Various engine operating conditions (lambda variation for this paper) are virtually investigated, and the performance of the engine can be extrapolated. The presented virtual development approach allows comprehensive emission evaluations during the initial stages of engine prototype development KW - CNG KW - Cold start KW - Afterteatment KW - Three-Way Catalyst KW - Surface chemistry KW - Simulation Y1 - 2023 U6 - https://doi.org/10.4271/2023-24-0112 SN - 0148-7191 SN - 2688-3627 ER - TY - GEN A1 - David, William I. F. A1 - Agnew, Gerry D. A1 - Bañares-Alcántara, René A1 - Barth, James A1 - Hansen, John Bogild A1 - Bréquigny, Pierre A1 - De Joannon, Mara A1 - Fürstenberg Stott, Sofia A1 - Fürstenberg Stott, Conor A1 - Guati-Rojo, Andrea A1 - Hatzell, Marta A1 - MacFarlane, Douglas R. A1 - Makepeace, Joshua W. A1 - Mastorakos, Epaminondas A1 - Mauß, Fabian A1 - Medford, Andrew A1 - Mounaim-Rousselle, Christine A1 - Nowicki, Duncan A. A1 - Picciani, Mark A. A1 - Postma, Rolf S. A1 - Rouwenhorst, Kevin H. R. A1 - Sabia, Pino A1 - Salmon, Nicholas A1 - Simonov, Alexandr N. A1 - Smith, Collin A1 - Torrente-Murciano, Laura A1 - Valera-Medina, Augustin T1 - 2023 Roadmap on ammonia as a carbon-free fuel T2 - Journal of Physics: Energy N2 - The 15 short chapters that form this 2023 ammonia-for-energy roadmap provide a comprehensive assessment of the current worldwide ammonia landscape and the future opportunities and associated challenges facing the use of ammonia, not only in the part that it can play in terms of the future displacement of fossil-fuel reserves towards massive, long-term, carbon-free energy storage and heat and power provision, but also in its broader holistic impacts that touch all three components of the future global food-water-energy nexus. Y1 - 2024 U6 - https://doi.org/10.1088/2515-7655/ad0a3a SN - 2515-7655 VL - 6 IS - 2 ER - TY - GEN A1 - Giri, Binod Raj A1 - Palacios, Manuel Monge A1 - Thangaraj, Ravikumar A1 - Shrestha, Krishna Prasad A1 - Viskolcz, Béla A1 - Mauss, Fabian A1 - Szőri, Milán T1 - An Ab initio based OH initiated oxidation kinetics of glycerol carbonate: A promising biofuel component T2 - Proceedings of the Combustion Institute N2 - The global energy demand is steadily increasing because of the population explosion and economic growth. Fossil fuels supply around 85 % of global primary energy demand. On one hand, fulfilling the increasing energy demands is a big challenge for the next few decades. On the other hand, the continued burning of fossil fuels leads to higher CO2 emissions, severely impacting global warming. Therefore, the policymakers vow to shift from conventional fuels to renewable resources for economic, environmental, and future energy security reasons. In this context, biofuels from lignocellulosic biomass and/or carbon-neutral fuels produced in the sustainable carbon cycle can close the carbon cycle and reach net zero-carbon emission. Recently, glycerol carbonate has been proposed as a promising fuel or fuel additive for future sustainability. Therefore, we investigated the hydrogen abstraction reactions of glycerol carbonate (GC) by OH radicals using high-level ab initio and variational transition state theory calculations. We mapped out the potential energy surface using the CCSD(T)/cc-pV(D, T)Z//MP2/cc-pVTZ level of theory. We used the ab initio parameters to obtain the site-specific rate coefficients by employing the variational transition state theory. We observed that every hydrogen atom in GC displays a unique reactivity with OH radicals. We derived branching ratio of each channel that are difficult to access experimentally. The overall rate coefficients exhibit a strong non-Arrhenius behaviour, which can be represented as: This is the first reported rate data for the glycerol carbonate and OH radicals reaction. Y1 - 2024 UR - https://www.sciencedirect.com/science/article/abs/pii/S1540748924004760 U6 - https://doi.org/10.1016/j.proci.2024.105668 VL - 40 SP - 1 EP - 8 PB - Elsevier ER - TY - GEN A1 - Eckart, Sven A1 - Shrestha, Krishna P A1 - Giri, Binod R A1 - Fang, Qilong A1 - Li, Wei A1 - Mauss, Fabian A1 - Krause, Hartmut A1 - Li, Yuyang T1 - Insight into premixed diethoxymethane flames: Laminar burning velocities, temperatures, and emissions behaviour T2 - Proceedings of the Combustion Institute N2 - Diethoxymethane ((CH3CH2O)2CH2, DEM) is a promising carbon-neutral fuel. DEM is a diether or acetal with a molecular structure similar to oxymethylene ethers (CH3O–(CH2O)n–CH3, OMEn). Thus, DEM can be expected to have a similar combustion behavior to OMEs, reducing harmful emissions such as NOx and particulate matter (PM) in internal combustion engines. From both experimental and kinetic modeling, fundamental studies on DEM are scarce in the literature. More studies are required to gain a detailed insight into the oxidation kinetics of DEM. Laminar burning velocity (LBV) is a critical property that allows a detailed assessment of the potential application of DEM in combustion devices. Unfortunately, the literature on the LBV of DEM is limited. Therefore, in this study we have investigated the LBV of DEM using two reactors for the first time, namely a heat flux burner and a combustion chamber. The experimental data is reported for equivalence ratio between 0.7 and 1.7, initial temperatures of 368–423 K, and initial pressure of 1–5 bar. In addition, we developed a detailed kinetic model extending our recent work of Shrestha et al. (Combust. Flame. 246 (2022) 112,426) to characterize the combustion behavior of DEM utilizing the new experimental data from this work and the literature data. Our model performs remarkably well in capturing the newly measured LBV experimental data over various experimental conditions. We found that DEM and dimethoxy methane (DMM) have similar values of LBVs (within ±1.5 cm/s) for a given condition, which indicates that intermediate chemistry governs the flame chemistry. Despite DEM being a larger molecule that is expected to have slightly lower LBVs than DMM, its effect on the measured values of LBVs is negligible. Finally, we experimentally measured NOx formation in DEM flame for the first time. The stochiometric flame has the highest NOx formation. The proposed model predicted the equivalence ratio dependence of NOx nicely. However, it overestimates the NOx formation for stoichiometric DEM/air mixtures by ∼30 %. The model suggests that the thermal NO formation route is favored at lean and stochiometric conditions. In contrast, the prompt NO formation route is enhanced for rich mixtures. Y1 - 2024 UR - https://www.sciencedirect.com/science/article/pii/S1540748924003870 U6 - https://doi.org/10.1016/j.proci.2024.105579 VL - 40 SP - 1 EP - 7 PB - Elsevier ER - TY - GEN A1 - Eckart, Sven A1 - Shrestha, Krishna P A1 - Giri, Binod R A1 - Fang, Qilong A1 - Chen, Chen A1 - Li, Wei A1 - Krause, Hartmut A1 - Mauss, Fabian A1 - Liu, Dong A1 - Li, Yuyang T1 - Chemical insights into ethyl acetate flames from experiment and kinetic modeling: Laminar burning velocity, speciation and NOx emission T2 - Proceedings of the Combustion Institute N2 - Oxygenated fuels, such as alcohols, ethers, and esters, are promising alternatives to conventional fuels. These fuels can help reduce detrimental emissions like carbon monoxide and unburned hydrocarbons and enhance octane ratings. Among these oxygenates, ethyl acetate (EA), a small alkyl ester sourced from biomass, emerges as a clean, promising energy carrier. It serves as a surrogate fuel to facilitate investigations into the combustion behaviours of biodiesel. Despite its importance, the literature knowledge of EA combustion characteristics is limited. Therefore, this study aims to broaden the knowledge of the combustion behaviour of this type of oxygenated fuel compound. In this study, we measured the laminar burning velocities of EA by employing a heat flux burner and a closed combustion vessel over the equivalence ratios of 0.7 – 1.7, pressures of 1 – 10 bar and temperatures ranging from 353 – 423 K. Further, we also measured the NOx emissions in exhaust gas of the premixed flames fueled by EA/air for the first time over the equivalence ratio of 0.8 – 1.2. Additionally, we employed a non-premixed counterflow flame setup for extensive characterisation of species and their concentration under diverse conditions encompassing various strain rates and oxygen concentrations. Finally, we utilized these newly measured data to construct and validate a detailed kinetic model developed as part of this work. The newly developed model will help characterize the combustion properties of EA. Y1 - 2024 UR - https://www.sciencedirect.com/science/article/pii/S1540748924002955 U6 - https://doi.org/10.1016/j.proci.2024.105487 VL - 40 (2024) SP - 1 EP - 7 PB - Elsevier ER - TY - GEN A1 - Thomas, Daniel E A1 - Shrestha, Krishna P A1 - Mauss, Fabian A1 - Northrop, William F T1 - Extinction and NO formation of ammonia-hydrogen and air non-premixed counterflow flames T2 - Proceedings of the Combustion Institute N2 - Green ammonia, produced using renewable energy, is a promising carbon-free energy vector and fuel. This work studies combustion of ammonia-hydrogen fuel mixtures with air in counterflow diffusion flame experiments and provides an improved kinetic mechanism for modeling ammonia combustion. The extinction strain rate is measured for a range of 0 to 15% hydrogen in the fuel blend. The flame structure is also investigated with quantitative laser-induced fluorescence (LIF) measurements of nitric oxide (NO) for the same hydrogen concentrations and strain rate range from 26 to 134 s. For these conditions, NO concentration increases with both strain rate and fuel hydrogen content. The previously published kinetic model developed by the authors is used to perform one-dimensional flame simulations of the experimental setup and conditions, and results are compared to three other recently published ammonia mechanisms. None of the selected models satisfactorily predict both the measured extinction strain rate and flame NO concentration. The models mainly fail to predict extinction strain rate at higher Hfraction and NO formation at the highest experimental strain rates and H fraction. The reaction rate parameters for some of the key reactions in the published model developed by authors were updated to improve agreement with experimental results. The updated model results are closely aligned with extinction strain rate measurements, and have improved prediction of flame NO concentration. The model reveals that the reactions from the NH and NH sub-mechanism are sensitive in predicting the extinction strain rate as well as NO. In particular, the reaction NH+NO=NO+H had significant impact on NO predictions. Y1 - 2024 UR - https://www.sciencedirect.com/science/article/abs/pii/S1540748922003388 U6 - https://doi.org/10.1016/j.proci.2022.08.067 VL - 39 IS - 2 SP - 1803 EP - 1812 PB - Elsevier ER - TY - GEN A1 - Pasternak, Michał A1 - Siddareddy, Reddy Babu A1 - de Syniawa, Larisa León A1 - Guenther, Vivien A1 - Picerno, Mario A1 - Andert, Jakob A1 - Franken, Tim A1 - Mauss, Fabian A1 - Adamczyk, Wojciech T1 - Plant modelling of engine and aftertreatment systems for X-in-the-loop simulations with detailed chemistry T2 - CONAT 2024 International Congress of Automotive and Transport Engineering. N2 - Use of numerical simulations at early stage of engine and aftertreatment systems development helps in evaluating their different concepts and reducing the need for costly building of prototypes. In this work, we explore the feasibility of fully physical and chemical-based tool-chain for co-simulating engine in-cylinder and aftertreatment processes. Detailed gas-phase reaction kinetics and surface chemistry mechanisms are applied for the modeling of combustion, pollutants formation and aftertreatment, respectively. Engine in-cylinder performance parameters are simulated using a stochastic reactor model and multi-component fuel surrogate. The engine model is coupled with an aftertreatment model capable of simulating diesel oxidation catalyst (DOC), selective catalytic reduction catalyst, lean NOx trap, ammonia slip catalyst, and three-way catalyst. Both the engine and aftertreatment models are embedded within the Simulink framework. They work in co-simulation and are coupled using Functional Mock-up Interface (FMI) technology. The coupled framework acts as a virtual test bench that is developed given its application for X-in-the-Loop (XiL) simulations. The framework can be applied to engine steady state or transient operating conditions. Here, exemplary calculations are performed using a Model-in-the-Loop (MiL) approach. Simulations are conducted under transient conditions of Worldwide Harmonized Light Vehicle Test Cycle for a compression ignition engine coupled with a DOC. The presented framework is considered a first step towards complex engine plant modeling using detailed chemistry for the virtualization of the development of engine, fuels and aftertreatment systems. Y1 - 2024 SN - 978-3-031-77626-7 U6 - https://doi.org/10.1007/978-3-031-77627-4_14 SP - 151 EP - 163 PB - Springer Nature Switzerland CY - Cham ER - TY - GEN A1 - Mauss, Fabian A1 - Rakhi, Rakhi T1 - Numerical study of catalytic methanation reactions using a kinetic model T2 - SAE Technical Paper N2 - Even if huge efforts are made to push alternative mobility concepts, such as, electric cars (BEV) and fuel cell powered cars, the importance and use of liquid fuels is anticipated to stay high during the 2030s. The biomethane and synthetic natural gas (SNG) might play a major role in this context as they are raw material for chemical industry, easy to be stored via existing infrastructure, easy to distribute via existing infrastructure, and versatile energy carrier for power generation and mobile applications. Hence, biomethane and synthetic natural gas might play a major role as they are suitable for power generation as well as for mobile applications and can replace natural gas without any infrastructure changes. In this paper, we aim to understand the direct production of synthetic natural gas from CO2 and H2 in a Sabatier process based on a thermodynamic analysis as well as a multi-step kinetic approach. For this purpose, we thoroughly discuss CO2 methanation to control emission in order to maximize the methane formation and minimize the CO formation and to understand the complex methanation process. We have considered an equilibrium and kinetic modelling study on the NiO-SiO2 catalyst for methanation focusing on CO2 derived SNG. In this work, a comprehensive thermodynamic analysis of CO2 hydrogenation is preformed to define the optimum process parameters followed by the kinetic simulations. Further, the simulations can be performed at various conditions, for example, catalyst mass, mass flow, pressure, temperature etc. to optimize the methanation process. Y1 - 2024 U6 - https://doi.org/10.4271/2024-24-0022 SN - 0148-7191 IS - 2024-24-0022 ER - TY - GEN A1 - Mauss, Fabian A1 - Rakhi, Rakhi T1 - Numerical investigation of equilibrium and kinetic aspects for hydrogenation of CO2 T2 - Catalysts N2 - Even if huge efforts are made to push alternative mobility concepts, such as electric cars and fuel-cell-powered cars, the significance and use of liquid fuels is anticipated to stay high during the 2030s. Biomethane and synthetic natural gas (SNG) might play a major role in this context, as they are raw material for chemical industry that is easy to be stored and distribute via existing infrastructure, and are a versatile energy carrier for power generation and mobile applications. Since biomethane and synthetic natural gas are suitable for power generation and for mobile applications, they can therefore replace natural gas without any infrastructure changes, thus playing a major role.In this paper, we aim to comprehend the direct production of synthetic natural gas from CO2 and H2 in a Sabatier process based on a thermodynamic analysis as well as a multi-step kinetic approach. For this purpose, we thoroughly discuss CO2 methanation to control emissions in order to maximize the methane formation along with minimizing the CO formation and to understand the complex methanation process. We consider an equilibrium and kinetic modeling study on the NiO-SiO2 catalyst for methanation focusing on CO2-derived SNG. The thermodynamic analysis of CO2 hydrogenation is preformed to define the optimal process parameters followed by the kinetic simulations for catalyst development. The investigation presented in this paper can also be used for developing machine learning algorithms for methanation processes. Y1 - 2024 UR - https://www.mdpi.com/2073-4344/14/9/562 U6 - https://doi.org/10.3390/catal14090562 VL - 14 SP - 1 EP - 20 PB - MDPI ER -