TY - GEN A1 - Franken, Tim A1 - Netzer, Corinna A1 - Pasternak, Michal A1 - Mauß, Fabian A1 - Seidel, Lars A1 - Matrisciano, Andrea A1 - Borg, Anders A1 - Lehtiniemi, Harry A1 - Kulzer, André Casal T1 - Simulation of Spark-Ignited Engines with Water Injection using the Stochastic Reactor Model, 37th International Symposium on Combustion Y1 - 2018 UR - https://www.researchgate.net/publication/328265636 ER - TY - GEN A1 - Agbro, Edirin A1 - Tomlin, Alison S. A1 - Zhang, Wankang A1 - Burluka, Alexey A1 - Mauß, Fabian A1 - Alfazazi, Adamu A1 - Sarathy, S. Mani T1 - Chemical Kinetic Modeling Study on the Influence of n-Butanol Blending on the Combustion, Autoignition, and Knock Properties of Gasoline and Its Surrogate in a Spark-Ignition Engine T2 - American Chemical Society N2 - The ability of a mechanism describing the oxidation kinetics of toluene reference fuel (TRF)/n-butanol mixtures to predict the impact of n-butanol blending at 20% by volume on the autoignition and knock properties of gasoline has been investigated under conditions of a strongly supercharged spark-ignition (SI) engine. Simulations were performed using the LOGEengine code for stoichiometric fuel/air mixtures at intake temperature and pressure conditions of 320 K and 1.6 bar, respectively, for a range of spark timings. At the later spark timing of 6° crank angle (CA) before top dead center (BTDC), the predicted knock onsets for a gasoline surrogate (TRF) and the TRF/n-butanol blend are higher compared to the measurements, which is consistent with an earlier study of ignition delay times predicted in a rapid compression machine (RCM; Agbro, E.; Tomlin, A. S.; Lawes, M.; Park, S.; Sarathy, S. M. The influence of n … KW - The ability of a mechanism describing the oxidation kinetics Y1 - 2018 U6 - https://doi.org/10.1021/acs.energyfuels.8b00962 SN - 1520-5029 SN - 0887-0624 VL - 32 IS - 10 SP - 10065 EP - 10077 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Detailed Kinetic Mechanism for the Oxidation of Ammonia Including the Formation and Reduction of Nitrogen Oxides T2 - Energy & Fuels N2 - This work introduces a newly developed reaction mechanism for the oxidation of ammonia in freely propagating and burner-stabilized premixed flames as well as shock-tube, jet-stirred reactor, and plug-flow reactor experiments. The paper mainly focuses on pure ammonia and ammonia–hydrogen fuel blends. The reaction mechanism also considers the formation of nitrogen oxides as well as the reduction of nitrogen oxides depending upon the conditions of the surrounding gas phase. Doping of the fuel blend with NO2 can result in acceleration of H2 autoignition via the reaction NO2 + HO2 ⇋ HONO + O2, followed by the thermal decomposition of HONO, or deceleration of H2 oxidation via NO2 + OH ⇋ NO + HO2. The concentration of HO2 is decisive for the active reaction pathway. The formation of NO in burner-stabilized premixed flames is shown to demonstrate the capability of the mechanism to be integrated … KW - Energy & Fuels Y1 - 2018 U6 - https://doi.org/10.1021/acs.energyfuels.8b01056 SN - 1520-5029 SN - 0887-0624 VL - 32 IS - 10 SP - 10202 EP - 10217 ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Pasternak, Michal A1 - Lehtiniemi, Harry A1 - Perlman, Cathleen A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Three-dimensional computational fluid dynamics engine knock prediction and evaluation based on detailed chemistry and detonation theory T2 - International Journal of Engine Research N2 - Engine knock is an important phenomenon that needs consideration in the development of gasoline-fueled engines. In our days, this development is supported using numerical simulation tools to further understand and predict in-cylinder processes. In this work, a model tool chain which uses a detailed chemical reaction scheme is proposed to predict the auto-ignition behavior of fuels with different octane ratings and to evaluate the transition from harmless auto-ignitive deflagration to knocking combustion. In our method, the auto-ignition characteristics and the emissions are calculated using a gasoline surrogate reaction scheme containing pathways for oxidation of ethanol, toluene, n-heptane, iso-octane and their mixtures. The combustion is predicted using a combination of the G-equation based flame propagation model utilizing tabulated laminar flame speeds and well-stirred reactors in the burned and … KW - Engine knock is an important phenomenon Y1 - 2018 U6 - https://doi.org/10.1177/1468087417740271 SN - 1468-0874 SN - 2041-3149 VL - 19 IS - 1 SP - 33 EP - 44 ER - TY - GEN A1 - Moshammer, Kai A1 - Seidel, Lars A1 - Wang, Yu A1 - Selim, Hatem A1 - Sarathy, S. Mani A1 - Mauß, Fabian A1 - Hansen, Nils T1 - Aromatic ring formation in opposed-flow diffusive 1, 3-butadiene flames T2 - Proceedings of the Combustion Institute N2 - This paper is concerned with the formation of one-and two-ring aromatic species in near atmospheric-pressure opposed-flow diffusion flames of 1, 3-butadiene (1, 3-C 4 H 6). The chemical structures of two different 1, 3-C 4 H 6/Ar–O 2/Ar flames were explored using flame-sampling molecular-beam mass spectrometry with both electron and single-photon ionization. We provide mole fraction profiles of 47 components as function of distance from the fuel outlet and compare them to chemically detailed modeling results. To this end, the hierarchically developed model described by Seidel et al.[16] has been updated to accurately comprise the chemistry of 1, 3-butadiene. Generally a very good agreement is observed between the experimental and modeling data, allowing for a meaningful reaction path analysis. With regard to the formation of aromatic species up to naphthalene, it was essential to improve the fulvene … KW - formation of one-and two-ring aromatic species Y1 - 2017 U6 - https://doi.org/10.1016/j.proci.2016.09.010 SN - 1540-7489 VL - 36 IS - 1 SP - 947 EP - 955 ER - TY - CHAP A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Zeuch, Thomas ED - Bockhorn, Henning ED - Scala, F. ED - Commodo, M. ED - Tregrossi, A. T1 - Development of a kinetic mechanism for NOx fuel interaction T2 - Proceedings, Joint Meeting of the German and Italian Sections of the Combustion Institute, 41st Meeting on Combustion, Sorrento, May 2018 N2 - This work introduces a newly developed reaction mechanism to predict fuel/NOx interaction in freely propagating, burner stabilized premixed flames, shock tubes, jet stirred reactors and plug flow reactors experiments. The study focuses on pure ammonia as fuel as well as H₂,H₂/CO, CH₄ doped with NO, NO₂ and N₂O. The kinetic scheme also focuses on the formation and consumption of nitrogen oxides at different experimental conditions. It is found that the doping with N₂O has almost no sensitivity on the H₂ chemistry, while small amount of NO₂ is enough to change the pressure dependence of H₂ auto ignition. The experiments with N₂O still show the significant influence of the chain breaking reaction H+O₂(+M)⇋HO₂(+M) on the H₂ ignition delay times, resulting in the crossing lines for the ignition delay times, which are moved at higher pressure to higher temperature. The concentration of HO₂ is decisive for the active reaction pathway in shock tube oxidation as well as in jet stirred and flow reactor. Reaction NO+HO₂⇋NO₂+OH and NO₂+H⇋NO+OH are very important because they strongly influence the inter conversion process of NO and NO₂ in jet stirred reactor and flow reactor for cases studied herein. The formation of NO in burner stabilized premixed flames is shown to demonstrate the capability of the mechanism to be integrated into mechanisms for hydrocarbon oxidation. KW - Development of a Kinetic Y1 - 2018 UR - http://www.combustion-institute.it/proceedings/XXXXI-ASICI/proceedings2018.pdf SN - 978-88-88104-22-5 PB - Associazione Sezione Italiana del Combustion Institute CY - Napoli ER - TY - CHAP A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Lehtiniemi, Harry A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Impact of gasoline surrogates with different fuel sensitivity (RON-MON) on knock prediction T2 - Proceedings of the 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th European Conference on Computational Fluid Dynamics ECFD 7, Glasgow, Scotland, UK June 11 – 15, 2018 KW - Impact of gasoline surrogates Y1 - 2018 UR - http://www.eccm-ecfd2018.org/frontal/docs/Ebook-Glasgow-2018-ECCM-VI-ECFD-VII.pdf SP - 906 EP - 917 ER - TY - GEN A1 - Franken, Tim A1 - Duggan, Alexander A1 - Tao, Feng A1 - Matrisciano, Andrea A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Mauß, Fabian T1 - Multi-Objective Optimization of Fuel Consumption and NOx Emissions of a heavy-duty Diesel engine using a Stochastic Reactor Model T2 - SAE technical paper N2 - Highly fuel-efficient Diesel engines, combined with effective exhaust aftertreatment systems, enable an economic and low-emission operation of heavy-duty vehicles. The challenge of its development arises from the present engine complexity, which is expected to increase even more in the future. The approved method of test bench measurements is stretched to its limits, because of the high demand for large parameter variations. The introduction of a physics-based quasi-dimensional stochastic reactor model combined with tabulated chemistry enables the simulation-supported development of these Diesel engines. The stochastic reactor model mimics mixture and temperature inhomogeneities induced by turbulence, direct injection and heat transfer. Thus, it is possible to improve the prediction of NOx emissions compared to common mean-value models. To reduce the number of designs to be evaluated during … KW - Highly fuel-efficient Diesel engines Y1 - 2019 SN - 0096-5170 SN - 0148-7191 IS - 2019-01-1173 ER - TY - GEN A1 - Malliotakis, Zisis A1 - Banyon, Colin A1 - Zhang, Kuiwen A1 - Wagnon, Scott W. A1 - Rodriguez Henriquez, Jose Juan A1 - Vourliotakis, George A1 - Keramiotis, Christos A1 - Founti, Maria A1 - Mauß, Fabian A1 - Pitz, William J. A1 - Curran, Henry J. T1 - Testing the validity of a mechanism describing the oxidation of binary n-heptane/toluene mixtures at engine operating conditions T2 - Combustion and Flame N2 - The aim of this work is to evaluate the influence of the n-heptane/toluene ratio on the reactivity of binary toluene reference fuels (TRFs), through a combined experimental and numerical work. Novel experimental ignition delay time (IDT) data of three binary TRFs of varying n-heptane/toluene ratios have been obtained in a high-pressure shock tube and in a rapid compression machine at conditions relevant to novel engine operation. Measurements have been performed at two pressures (10 and 30 bar), and at three fuel/air equivalence ratios (0.5, 1.0 and 2.0) for TRF mixtures of 50%, 75% and 90% by volume toluene concentration, over the temperature range of 650–1450 K. It was found that, increasing the n-heptane content, led to an increase in reactivity and shorter measured IDTs. Reduced sensitivity to the equivalence ratio was observed at high temperatures, especially for high toluene content mixtures. A … KW - The aim of this work is to evaluate the influence of the n-heptane/toluene Y1 - 2019 U6 - https://doi.org/10.1016/j.combustflame.2018.10.024 SN - 0010-2180 VL - 199 SP - 241 EP - 248 ER - TY - GEN A1 - Franken, Tim A1 - Klauer, Christian A1 - Kienberg, Martin A1 - Matrisciano, Andrea A1 - Mauß, Fabian T1 - Prediction of thermal stratification in an engine-like geometry using a zero-dimensional stochastic reactor model T2 - International Journal of Engine Research KW - Prediction of thermal stratification Y1 - 2019 UR - https://journals.sagepub.com/eprint/5AKgEhAVA8RDS2tQWdGK/full SN - 2041-3149 U6 - https://doi.org/10.1177/1468087418824217 SN - 1468-0874 ER - TY - GEN A1 - Werner, Adina A1 - Matrisciano, Andrea A1 - Netzer, Corinna A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Further Application of the Fast Tabulated CPV Approach Y1 - 2018 UR - https://www.researchgate.net/publication/330737537 U6 - https://doi.org/10.13140/RG.2.2.18689.71529 N1 - 1st International Conference on Smart Energy Carriers ER - TY - GEN A1 - Werner, Adina A1 - Netzer, Corinna A1 - Lehtiniemi, Harry A1 - Borg, Anders A1 - Matrisciano, Andrea A1 - Seidel, Lars A1 - Mauß, Fabian T1 - A Computationally Efficient Combustion Progress Variable (CPV) Approach for Engine Applications KW - (CPV) Approach for Engine Applications Y1 - 2018 U6 - https://doi.org/10.13140/RG.2.2.15334.27209 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Kinetic Modeling of NOx Formation and Consumption during Methanol and Ethanol Oxidation T2 - Combustion Science and Technology KW - Kinetic Modeling of NOx Formation Y1 - 2019 U6 - https://doi.org/10.1080/00102202.2019.1606804 SN - 1563-521X VL - 191 IS - 9 SP - 1628 EP - 1660 ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Impact of the surrogate formulation on 3D CFD engine knock prediction using detailed chemistry T2 - Fuel N2 - For engine knock prediction, surrogate fuels are often composed of iso-octane and n-heptane since they are the components of the Primary Reference Fuel (PRF). By definition, a PRF has no octane sensitivity (S = RON-MON). However, for a commercial gasoline fuel holds RON > MON and therefor S > 0. More complex surrogates are Toluene Reference Fuels (TRF) and Ethanol containing Toluene Reference Fuels (ETRF). In this work, the impact of the surrogate formulation on the prediction of flame propagation and auto-ignition in the unburnt gases are investigated. The surrogates are composed such that the Research Octane Number is the same. The auto-ignition events ahead of the flame front are predicted using 3D CFD and a combustion model based on the ETRF mechanism by Seidel (2017). The strength of the auto-ignition is determined using the detonation diagram by Bradley and co-workers (2002, 2003). Applying the different surrogates, ignition kernels of different size and reactivity are predicted. The results indicate a dependency on the local temperature history and the low temperature chemistry of the fuel species. The comparison of homogenous constant volume reactor and transient simulations show that the analysis of ignition delay time and octane rating solely from homogenous simulations is not sufficient if the knock tendency of a surrogate in engine simulations needs to be characterized. Y1 - 2019 U6 - https://doi.org/10.1016/j.fuel.2019.115678 SN - 1873-7153 VL - Volume 254 ER - TY - GEN A1 - Netzer, Corinna A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Assessment of the validity of RANS knock prediction using the resonance theory T2 - International Journal of Engine Research N2 - Following the resonance theory by Bradley and co-workers, engine knock is a consequence of an auto-ignition in the developing detonation regime. Their detonation diagram was developed using direct numerical simulations and was applied in the literature to engine knock assessment using large eddy simulations. In this work, it is analyzed if the detonation diagram can be applied for post-processing and evaluation of predicted auto-ignitions in Reynolds-averaged Navier–Stokes simulations even though the Reynolds-averaged Navier–Stokes approach cannot resolve the fine structures resolved in direct numerical simulations and large eddy simulations that lead to the prediction of a developing detonation. For this purpose, an engine operating point at the knock limit spark advance is simulated using Reynolds-averaged Navier–Stokes and large eddy simulations. The combustion is predicted using the G-equation and the well-stirred reactor model in the unburnt gases based on a detailed gasoline surrogate reaction scheme. All the predicted ignition kernels are evaluated using the resonance theory in a post-processing step. According to the different turbulence models, the predicted pressure rise rates and gradients differ. However, the predicted ignition kernel sizes and imposed gas velocities by the auto-ignition event are similar, which suggests that the auto-ignitions predicted by Reynolds-averaged Navier–Stokes simulations can be given a meaningful interpretation within the detonation diagram. Y1 - 2020 U6 - https://doi.org/10.1177/1468087419846032 SN - 2041-3149 SN - 1468-0874 VL - 21 IS - 4 SP - 610 EP - 621 ER - TY - GEN A1 - Netzer, Corinna A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Ravet, Frédéric A1 - Mauß, Fabian T1 - Computationally efficient prediction of cycle-to-cycle variations in spark-ignition engines T2 - International Journal of Engine Research N2 - Cycle-to-cycle variations are important to consider in the development of spark-ignition engines to further increase fuel conversion efficiency. Direct numerical simulation and large eddy simulation can predict the stochastics of flows and therefore cycle-to-cycle variations. However, the computational costs are too high for engineering purposes if detailed chemistry is applied. Detailed chemistry can predict the fuels’ tendency to auto-ignite for different octane ratings as well as locally changing thermodynamic and chemical conditions which is a prerequisite for the analysis of knocking combustion. In this work, the joint use of unsteady Reynolds-averaged Navier–Stokes simulations for the analysis of the average engine cycle and the spark-ignition stochastic reactor model for the analysis of cycle-to-cycle variations is proposed. Thanks to the stochastic approach for the modeling of mixing and heat transfer, the spark-ignition stochastic reactor model can mimic the randomness of turbulent flows that is missing in the Reynolds-averaged Navier–Stokes modeling framework. The capability to predict cycle-to-cycle variations by the spark-ignition stochastic reactor model is extended by imposing two probability density functions. The probability density function for the scalar mixing time constant introduces a variation in the turbulent mixing time that is extracted from the unsteady Reynolds-averaged Navier–Stokes simulations and leads to variations in the overall mixing process. The probability density function for the inflammation time accounts for the delay or advancement of the early flame development. The combination of unsteady Reynolds-averaged Navier–Stokes and spark-ignition stochastic reactor model enables one to predict cycle-to-cycle variations using detailed chemistry in a fraction of computational time needed for a single large eddy simulation cycle. Y1 - 2020 U6 - https://doi.org/10.1177/1468087419856493 SN - 2041-3149 SN - 1468-0874 VL - 21 IS - 4 SP - 649 EP - 663 ER - TY - GEN A1 - Franken, Tim A1 - Netzer, Corinna A1 - Mauß, Fabian A1 - Pasternak, Michal A1 - Seidel, Lars A1 - Borg, Anders A1 - Lehtiniemi, Harry A1 - Matrisciano, Andrea A1 - Kulzer, André Casal T1 - Multi-objective optimization of water injection in spark-ignition engines using the stochastic reactor model with tabulated chemistry T2 - International Journal of Engine Research N2 - Water injection is investigated for turbocharged spark-ignition engines to reduce knock probability and enable higher engine efficiency. The novel approach of this work is the development of a simulation-based optimization process combining the advantages of detailed chemistry, the stochastic reactor model and genetic optimization to assess water injection. The fast running quasi-dimensional stochastic reactor model with tabulated chemistry accounts for water effects on laminar flame speed and combustion chemistry. The stochastic reactor model is coupled with the Non-dominated Sorting Genetic Algorithm to find an optimum set of operating conditions for high engine efficiency. Subsequently, the feasibility of the simulation-based optimization process is tested for a three-dimensional computational fluid dynamic numerical test case. The newly proposed optimization method predicts a trade-off between fuel efficiency and low knock probability, which highlights the present target conflict for spark-ignition engine development. Overall, the optimization shows that water injection is beneficial to decrease fuel consumption and knock probability at the same time. The application of the fast running quasi-dimensional stochastic reactor model allows to run large optimization problems with low computational costs. The incorporation with the Non-dominated Sorting Genetic Algorithm shows a well performing multi-objective optimization and an optimized set of engine operating parameters with water injection and high compression ratio is found. KW - Water Injection KW - Genetic Optimization KW - Spark Ignition Engine KW - Stochastic Reactor Model KW - Detailed Chemistry Y1 - 2019 UR - https://journals.sagepub.com/doi/full/10.1177/1468087419857602 U6 - https://doi.org/10.1177/1468087419857602 SN - 2041-3149 VL - 20 IS - 10 SP - 1089 EP - 1100 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Vin, Nicolas A1 - Herbinet, Olivier A1 - Seidel, Lars A1 - Battin-Leclerc, Frédérique A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Insights into nitromethane combustion from detailed kinetic modeling – Pyrolysis experiments in jet-stirred and flow reactors T2 - Fuel N2 - The pyrolysis of nitromethane highly diluted in helium was studied in a plug flow reactor and in a jet-stirred reactor at 1.07 bar and over the temperature range from 500 to 1100 K. Mole fraction profiles of major products and of intermediates were identified with gas chromatography and Fourier transform infrared spectroscopy. Using these experimental data, as well as published ones, we have developed a newly compiled model for the prediction of the pyrolysis and of the oxidation of nitromethane in jet-stirred and flow reactors, freely propagating, and burner-stabilized premixed flames, as well as in shock-tubes. The experimental results from the present work and from the literature are interpreted with the help of the kinetic model derived here. This study mainly focuses on the analysis of speciation in different reactors. Among the nitrogenous species, NO is found to be a major product for pyrolysis and oxidation. The model suggests that for nitromethane pyrolysis and oxidation the thermal dissociation channel to CH3 and NO2 is the main reaction path for the nitromethane degradation followed by the H-atom abstraction channel. The most sensitive reactions for nitromethane pyrolysis in a flow reactor and during pyrolysis and oxidation in a jet-stirred reactor are found to be CH3NO2(+M) ⇋ CH3 + NO2(+M) and CH3 + NO2 ⇋ CH3O + NO. The reaction CH3 + NO2 ⇋ CH3O + NO is found to be the most important reaction for all conditions studied. In a burner-stabilized premixed flame, as the mixture gets richer, the thermal dissociation channel CH3NO2(+M) ⇋ CH3 + NO2(+M) becomes more important as the contribution of the H-atom abstraction channel is decreased. Furthermore, in the burner-stabilized premixed flames, it was found that NO is mainly formed via NO2: NO2 + H ⇋ NO + OH, NO2 + CH3 ⇋ CH3O + NO. The model provided an overall reasonable agreement with the experimental data. However, for pyrolysis conditions, future work is desirable to improve predictions of intermediate species. This work extends the kinetic database and helps to improve the understanding of nitromethane chemistry. The kinetic model presented in this work can serve as a base model for hydrocarbons and oxygenated fuels higher than C2 and nitrogen-containing compounds higher than C1 as well as for pure nitrogen compounds. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/pii/S001623611931703X#! U6 - https://doi.org/https://doi.org/10.1016/j.fuel.2019.116349 SN - 0016-2361 VL - 261 ER - TY - GEN A1 - Van Treek, Lisa A1 - Lubrano Lavadera, Marco A1 - Konnov, Alexander A. A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Measurements of the laminar burning velocities of ethanol-water-air flames N2 - The laminar burning velocity of ethanol-water-air flames at atmospheric pressure and initial gas temperatures of T = 358 K was measured with the heat flux method. The mixture of ethanol-water-air contained 0%, 10%, 20%, 30% and 40% water by mole and the equivalence ratio (ϕ) range was varied from 0.7 to 1.4. The experiments were compared against predictions using three different kinetic models. Y1 - 2019 UR - https://www.researchgate.net/publication/330635016_Measurements_of_the_laminar_burning_velocities_of_ethanol-water-air_flames N1 - 1st International Conference on Smart Energy Carriers ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Modeling for Nitromethane oxidation T2 - 1st International Conference on Smart Energy Carriers Napoli, 2019 N2 - The diminishing availability of conventional fuels and stricter regulations on pollution control and CO2 emission targets have led scientist and engineers to look for alternative fuels. Recently nitromethane has slowly gained interest as alternative fuel over conventional fuel for internal combustion engines. In the past, it was mostly used as rocket propellant or as an explosives [1,2]. Nitromethane is an energetic compound with a wide variety of applications, including its use as a monopropellant, a liquid explosive, a solvent for chemical processing and analysis, and a highperformance fuel additive for internal combustion engines and pulsed detonation engines [3]. The chemical formula of nitromethane is CH3NO2. As the name suggests, the molecule is essentially methane with one of the four hydrogens replaced by a nitro group. In essence, it is the simplest of possible energetic CHON molecules that contain nitro groups, which is why it is often used in reaction studies as a prototype for more complex energetic materials. There is no reliable kinetic model for nitromethane combustion, which is validated over a wide range of experimental conditions. There are a few published studies [4–8] both numerically and experimentally focusing often on a single reactor at very specific conditions. The aim of the present work is to extend our recently published mechanism [9] for syngas, methane and ammonia oxidation to include CH3NO2 as fuel and validate against the available experimental data from the literature. The development and compilation strategy for our mechanism is described in our recent work [9] and this study is conducted in a similar manner. Rates are taken mainly from [7,10–16]. This makes the kinetic model more robust and reliable for combustion modelling. Y1 - 2019 UR - http://logesoft.com/loge-16/wp-content/uploads/2019/01/Abstract_1stICSEC_SMARTCATs_Napoli_Shrestha-et-al_2018-11-28.pdf ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Zeuch, Thomas T1 - Kinetic Modeling for NOx prediction with improved base Chemistry T2 - COST 1404, SMARTCATs, Chemistry of smart energy carriers and technologies, 3rd General Meeting and Workshop on SECs in Industry of SMARTCATs Action KW - COST 1404, SMARTCATs, Chemistry of smart energy carriers and technologies, 3rd General Meeting and Workshop on SECs in Industry of SMARTCATs Action Y1 - 2017 UR - http://www.smartcats.eu/wp-content/uploads/2017/10/AM3_02_01.pdf ER - TY - GEN A1 - León, Larisa A1 - Ruwe, Lena A1 - Moshammer, Kai A1 - Seidel, Lars A1 - Shrestha, Krishna Prasad A1 - Wang, Xiaoxiao A1 - Mauß, Fabian A1 - Kohse-Höinghaus, Katharina A1 - Hansen, Nils T1 - Chemical insights into the larger sooting tendency of 2-methyl-2-butene compared to n-pentane T2 - Combustion and Flame N2 - A comprehensive, chemically detailed mechanism for the combustion of 2-methyl-2-butene and n-pentane is presented to provide insights into the different sooting tendencies of these two structurally different C5 hydrocarbons. A hierarchically assembled mechanism has been developed to specifically target speciation data from low-pressure premixed flames of 2-methyl-2-butene [Ruwe et al., Combust. Flame, 175, 34-46, 2017] and newly measured mole fraction data for a fuel-rich (ɸ=1.8) n-pentane flame, in which species profiles up to phenol were quantified. The partially isomer-resolved chemical composition of this flame was determined using flame-sampling molecular-beam mass spectrometry with single-photon ionization by tunable, synchrotron-generated vacuum-ultraviolet radiation. The presented model, which includes a newly determined, consistent set of the thermochemistry data for the C5 species, presents overall satisfactory capabilities to predict the mole fraction profiles of common combustion intermediates. The analysis of the model predictions revealed the fuel-structure dependencies (i.e. saturated vs. unsaturated and linear vs. branched) of the formation of small aromatic species that are considered as soot precursors. The propensity of the 2-methyl-2-butene flame to form larger concentrations of aromatic species was traced back to the readily available formation routes of several small precursor molecules and the efficient formation of “first aromatic rings” beyond benzene. KW - 2-Methyl-2-butene KW - n-Pentane KW - Laminar premixed flames KW - Molecular-beam mass spectrometry KW - Kinetic modeling KW - PAH formation Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/S0010218019302883#! U6 - https://doi.org/10.1016/j.combustflame.2019.06.029 SN - 0010-2180 VL - 208 SP - 182 EP - 197 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Eckart, Sven A1 - Elbaz, Ayman M. A1 - Giri, Binod Raj A1 - Fritsche, Chris A1 - Seidel, Lars A1 - Roberts, William L. A1 - Krause, Hartmut A1 - Mauß, Fabian T1 - A comprehensive kinetic model for dimethyl ether and dimethoxymethane oxidation and NOx interaction utilizing experimental laminar flame speed measurements at elevated pressure and temperature T2 - Combustion and Flame N2 - Laminar flame speeds of dimethyl ether and dimethoxymethane at pressures from 1 to 5 bar and initial temperatures from 298 to 373 K were determined experimentally using a constant volume spherical vessel and a heat flux burner setup. This study is the first to report dimethoxymethane laminar flame speeds at a pressure higher than 1 bar. Using these experimental data along with data available in the literature, a new kinetic model for the prediction of the oxidation behavior of dimethyl ether and dimethoxymethane in freely propagating and burner stabilized premixed flames, in shock tubes, rapid compression machines, flow reactors, and a jet-stirred reactor has been developed. The experimental results from the present work and literature are interpreted with the help of the derived kinetic model. This newly developed reaction mechanism considers the redox chemistry of NOx to accommodate the influence of the oxygen level on the onset of fuel conversion and interconversion of NO and NO2. The current model suggests that an increased O2 level promotes the HO2 production, which in turn leads to the formation of OH radicals, which promotes the combustion of the fuel/air mixture under lean conditions. The increase of OH radical concentrations is mainly via the NO/NO2 interconversion reaction channel, NO+HO2=NO2+OH, NO2+H=NO+OH, CH3OCH3+NO2=CH3OCH2+HONO, followed by the thermal decomposition of HONO. This work extends the kinetic database and helps to improve the understanding of dimethyl ether and dimethoxymethane combustion behavior. The kinetic model presented in this work can serve as a base model for hydrocarbons and oxygenated fuels higher than C2. KW - Dimethyl ether KW - Dimethoxymethane KW - Laminar flame speed KW - Kinetic modeling KW - NOx Y1 - 2020 U6 - https://doi.org/10.1016/j.combustflame.2020.04.016 SN - 1556-2921 VL - 218 SP - 57 EP - 74 ER -