TY - CHAP A1 - Müller, Klaus A1 - Burkov, Yevgen A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Goryachko, Andriy A1 - Schmeißer, Dieter ED - Wöll, Christof T1 - Microscopic and spectroscopic characterization of interfaces and dielectric layers for OFET devices T2 - Organic Electronics : structural and Electronic Properties of OFETs KW - microscopic KW - spectrocsopic KW - dielectric Y1 - 2009 SN - 978-3-527-40810-8 SP - 445 EP - 468 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Spin coated organic ferroelectric films for non volatile memories KW - organic KW - ferroelectric Y1 - 2011 ER - TY - GEN A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Band gab determination of P(VDF-TrFE) copolymer film by electron energy loss spectroscopy Y1 - 2010 ER - TY - CHAP A1 - Garain, Samiran A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Schmeißer, Dieter T1 - One-Pot Synthesis of Copper Oxide Nanowires and PVDF/CuO Composite Films for Piezoelectric Energy Harvesting Application T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Band 53,3 N2 - Copper oxide (CuO) is an attractive p-type oxide semiconductor with narrow band gap that has intriguing properties such as non-toxicity, chemical stability, electrocatalytic activity, abundant availability and low production cost. Polymeric materials have attracted great interest owing to their high flexibility, light weight, low cost production and high resistance against corrosion. Poly(vinylidene fluoride) (PVDF) is a commonly used piezoelectric polymer due to its excellent flexibility and piezoelectric properties. In this work, we adopted a one-pot synthesis of CuO nanowires by facile and selective chemical etching process of Cu substrate. XPS, XRD, SEM data ascribed the formation of polycrystalline CuO nanowires over the entire Cu surface. It has been observed that the uniformity, shape and size of the nanowires could be conveniently controlled by etching time and etchant concentration. We have also prepared piezoelectric nanogenerator based on the flexible PVDF/CuO composite film, where the traditional electrical poling treatment was avoided. In addition, dielectric properties have been studied to demonstrate the role of interfacial polarization. KW - PVDF KW - electroactive phase KW - nanogenerators KW - energy storage Y1 - 2018 UR - https://www.dpg-verhandlungen.de/year/2018/conference/berlin/part/cpp/session/20/contribution/21 SN - 0420-0195 SP - S. 135 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Biswas, Anirban A1 - Garain, Samiran A1 - Maity, Kuntal A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Influence of In situ Synthesized Bismuth Oxide Nanostructures in Self-poled PVDF-based Nanogenerator for Mechanical Energy Harvesting Application T2 - Polymer Composites N2 - A self-poled piezoelectric nanogenerator (NG) based on bismuth oxide (Bi2O3) nanostructures (BNS)-doped poly(vinylidene fluoride) (PVDF) is demonstrated. The in-situ formation of BNS incorporated in the PVDF matrix is realized through a simple solution casting technique that favors the nucleation and stabilization of 99.6% of the electroactive phase in PVDF (i.e., beta/gamma-phases). The enhancement of the output voltage (3.6 V) and current (2.4mA) of the NG based on a nonelectrically poled BNS containing PVDF composite film is achieved and demonstrated by simple repeated human finger imparting. The improvement of the output performance is influenced by the generation of the electroactive polar beta-phase in PVDF, due to the electrostatic interactions between the –CH2–/–CF2– dipoles of PVDF and the surface charge of the BNS. The NGs are able to charge up capacitors demonstrating that the power generation from such a hybrid device structure can be utilized for powering various portable devices. KW - Nanogenerators KW - energy harvesting KW - PVDF KW - bismuth oxide KW - Field-emission scanning electron microscopy (FESEM) KW - X-ray photoelectron spectroscopy (XPS) KW - X-ray diffraction (XRD) KW - Fourier Transform Infrared Spectroscopy (FTIR) Y1 - 2019 U6 - https://doi.org/10.1002/pc.24628 SN - 0272-8397 SN - 1548-0569 VL - 40 IS - S1 SP - E265 EP - E274 ER - TY - GEN A1 - Ghosh, Sujoy Kumar A1 - Sinha, Tridib Kumar A1 - Xie, Mengying A1 - Bowen, Christopher Rhys A1 - Garain, Samiran A1 - Mahanty, Biswajit A1 - Roy, Krittish A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Kim, Jin Kuk A1 - Mandal, Dipankar T1 - Temperature–Pressure Hybrid Sensing All-Organic Stretchable Energy Harvester T2 - ACS Applied Electronic Materials N2 - The design and development of intrinsically stretchable all-organic self-powered sensors concurrently perceiving temperature and pressure remain a challenge but deliver an exciting platform to realize environmentally friendly wearable electronics. In this approach, a biomimetic all-organic stretchable energy harvester is designed by a xylitol-added poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS/Xyl) film as a compatible overlay electrode with polyaniline-reinforced one-dimensional aligned poly(vinylidene fluoride) hybrid electroactive soft nanowires. The gradient of elastic modulus between the electrode and the active nanowire component enables the all-organic device to manifest excellent power-generating performance under external temperature fluctuation (∼3 μW/m2 under ΔT ∼ 92 K) and mechanical force (∼31 μW/cm2 at 30 N). Importantly, the device renders simultaneous energy scavenging of temperature and pressure changes under pressing and stretching conditions (∼20%). The excellent mechanosensitivity (∼100 mV/N), fast response time (∼1 ms), outstanding mechanical and thermal stability, and good temperature resolution <10 K enable the harvester to act as an epidermal sensor, which simultaneously detects and discriminates both subtle pressure and thermal deviations exposed to an epidermis surface. The real-time recording and wireless transferring of physiological signals to a smartphone indicate an effective way to realize remote healthcare monitoring for early intervention. KW - all-organic KW - piezoelectric KW - pyroelectric KW - energy harvester KW - sensor KW - healthcare monitoring Y1 - 2021 U6 - https://doi.org/10.1021/acsaelm.0c00816 SN - 2637-6113 VL - 3 IS - 1 SP - 248 EP - 259 ER - TY - GEN A1 - Maity, Kuntal A1 - Garain, Samiran A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Self-Powered Human-Health Monitoring through Aligned PVDFNanofibers Interfaced Skin-Interactive Piezoelectric Sensor T2 - ACS Applied Polymer Materials N2 - Flexible and wearable e-skin sensors are attracting a great interest for their smart sensing applications in next-generation electronics. However, implant ability, sensitivity, and biosignal detection capability in a self-powered manner are the prime concerns in embedded devices. In particular, electrode compatibility and imperishability have become challenging issues in wearable sensors due to the poor compatibility and fragileness of metal electrodes. In this context, we report on a skin-interactive metal-free spongy electrode in a piezoelectric sensor where highly aligned poly(vinylidenefluoride) (PVDF) nanofibers (NFs) arrays are introduced as the piezoelectric active component and conducting polyaniline- (PANI-) coated PVDF (PANI−PVDF) NFs mats served as flexible electrodes. Notably, a 99% yield of piezoelectric phases of the aligned PVDF arrays is the key factor to exhibit promising mechano-sensitivity (0.8 V/kPa) performance that in turn helps in human-health monitoring. The sensor shows excellent mechanical to electrical energy conversion that enable to sense human finger touch (10 V under 10 kPa) with energy conversion efficiency of 53%. Most importantly, due to the compatible electrodes excellent mechanical stability has been found showing negligible degradation over 12,000 periodic cycles. Furthermore, under mechanical stimuli, it is also possible to charge up a capacitor (1μF) to 4 V within 60 s confirming the possibility to use the device as a self-powered piezo-organic-e-skin sensor (POESS). This type of structural design enables to trace elusive movement of muscles and the operation in several conditions such as bending, compression and stretching. We demonstrated various human gestures monitoring, such as wrist bending, neck stretching, and arm compressions, throat movements during drinking water, coughing actions, and swallowing. In addition, diverse specific phonation recognition, heart-pulse measurement and its respective short-time Fourier transform (STFT) analysis indicate an efficient and convenient way of monitoring human-health status particularly in hospital-free mode. KW - e-skin sensor KW - piezoelectric nanofibers KW - PVDF KW - flexible electrode KW - health-care monitoring KW - self-powered electronics Y1 - 2020 U6 - https://doi.org/10.1021/acsapm.9b00846 SN - 2637-6105 VL - 2 IS - 2 SP - 862 EP - 878 ER - TY - GEN A1 - Roy, Krittish A1 - Ghosh, Sujoy Kumar A1 - Sultana, Ayesha A1 - Garain, Samiran A1 - Xie, Mengying A1 - Bowen, Christopher Rhys A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - A Self-Powered Wearable Pressure Sensor and Pyroelectric Breathing Sensor Based on GO Interfaced PVDF Nanofibers T2 - ACS Applied Nano Materials N2 - This paper reports a self-powered,flexible, piezo- and pyro-electric hybrid nanogenerator (NG) device that can be fixed on different locations of human skin for detecting static and dynamic pressure variations and can also monitor temperature fluctuations during the respiration process. An efficient and cost-effective fabrication strategy has been developed to create electrospun poly(vinylidene fluoride) (PVDF)/graphene oxide (GO) nanofibers, which are used to create a highly sensitive wearable pressure sensor and pyroelectric breathing sensor. The sensor can accurately and rapidly detect pressures as low as 10 Pa with a high sensitivity (4.3 V/kPa), a key performance indicator for wearable sensors. Importantly, the sensor exhibits a high sensitivity to bending and stretching by finger, wrist, and elbow. The pressure sensor is also highly sensitive to vocal vibrations when attached to the human throat. The device can generate a maximum output power density of∼6.2 mW/m2 when subjected to a compressive stress, which enhances its range of applications. Moreover, it is demonstrated that doping with GO improves the pyroelectric energy harvesting and sensing performance of the device under repeated temperature fluctuations. The PVDF/GO-based nanogenerator has a maximum pyroelectric output power density of∼1.2 nW/m2 and can sense temperature changes during respiration, which makes it promising as a pyroelectric breathing sensor. It is demonstrated that processing of the PVDF-GO self-powered multifunctional pressure and pyroelectric breathing sensor can be up-scaled for fabricating compact and high-performance electronic skins for application in health monitoring, motion detection, and portable electronics. KW - piezo- and pyro-electric hybrid nanogenerator KW - poly(vinylidenefluoride) (PVDF)/graphene oxide (GO) nanofibers KW - wearable pressure sensor KW - breathing sensor Y1 - 2019 U6 - https://doi.org/10.1021/acsanm.9b00033 SN - 2574-0970 VL - 2 IS - 4 SP - 2013 EP - 2025 ER - TY - GEN A1 - Garain, Samiran A1 - Sen, Shrabanee A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Enhancement of Electroactive β-phase and Superior Dielectric Properties in Cerium Based Poly(vinylidene fluoride) Composite Films T2 - Materials Today: proceedings N2 - In this work we report on the preparation of poly(vinylidene fluoride) (PVDF) films with various mass fractions (wt%) of hydrated rare earth metal salt [(NH4)4Ce(SO4)4.2H2O] (CAS) and its electroactive phase (β- and γ-phase) formation. It was found that CAS can yield high amount of electroactive phases in PVDF. Compared to the neat PVDF film, a significantly increment of dielectric constant (ε ∼ 41) and a low loss factor (tan δ ∼ 0.8) were observed in the PVDF-CAS composite films. Thus the PVDF-CAS composite films with high electroactive phase and superior dielectric properties may meet the requirements of next generation electronic components. KW - PVDF KW - High amount of electroactive phase KW - Superior dielectric properties Y1 - 2018 U6 - https://doi.org/10.1016/j.matpr.2017.11.003 SN - 2214-7853 VL - 5 IS - 3 part 3 SP - 10084 EP - 10090 ER - TY - GEN A1 - Maity, Kuntal A1 - Garain, Samiran A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Natural Sugar-Assisted, Chemically Reinforced, Highly Durable Piezoorganic Nanogenerator with Superior Power Density for Self-Powered Wearable Electronics T2 - ACS Applied Materials & Interfaces N2 - Natural piezoelectric materials are of increasing interest, particularly for applications in biocompatible, implantable, and flexible electronic devices. In this paper, we introduce a cost-effective, easily available natural piezoelectric material, that is, sugar in the field of wearable piezoelectric nanogenerators (PNGs) where low electrical output, biocompatibility, and performance durability are still critical issues. We report on a high-performance piezoorganic nanogenerator (PONG) based on the hybridization of sugar-encapsulated polyvinylidenefluoride (PVDF) nanofiber webs (SGNFW). We explore the crucial role of single-crystal sugar having a fascinating structure along with the synergistic enhancement of piezoelectricity during nanoconfinement of sugar-interfaced macromolecular PVDF chains. As a consequence, the SGNFW-based PONG exhibits outstanding electricity generation capability (e.g.,∼100 V under 10 kPa human finger impact and maximum power density of 33 mW/m2) in combination with sensitivity to abundantly available different mechanical sources (such as wind flow, vibration, personal electronics, and acoustic vibration). Consequently, it opens up suitability in multifunctional self-powered wearable sensor designs for realistic implementation. In addition, commercially available capacitors are charged up effectively by the PONG because of its rapid energy storage capability. The high performance of the PONG not only offers“battery-free”energy generation (several portable units of light-emitting diodes and a liquid crystal display screen are powered up without using external storage) but also promises its use in wireless signal transmitting systems, which widens the potential in personal health care monitoring. Furthermore, owing to the geometrical stress confinement effect, the PONG is proven to be a highly durable power-generating device validated by stability test over 10 weeks. Therefore, the organic nanogenerator would be a convenient solution for portable personal electronic devices that are expected to operate in a self-powered manner. KW - natural piezoelectric material KW - sugar KW - PVDF KW - organic piezoelectric nanogenerator KW - high performance and durability KW - self-powered electronics Y1 - 2018 U6 - https://doi.org/10.1021/acsami.8b15320 SN - 1944-8244 SN - 1944-8252 VL - 10 SP - 44018 EP - 44032 ER - TY - GEN A1 - Biswas, Anirban A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Comparison of the thermal stability of the α, β and γ phases in poly(vinylidene fluoride) based on in situ thermal Fourier transform infrared spectroscopy T2 - Phase Transitions N2 - The electroactive β phase of poly(vinylidenefluoride) (PVDF) is induced due to the aging time of PVDF solutions. The feasibility of the combination of the three crystalline polymorphs (α, β and γ) is demonstrated where their relative proportion within the PVDF film can be tailored by the simple monitoring of the preparation conditions. To identify all these phases, Fourier transform infrared (FT-IR) spectroscopy is carried out and it is spotlighted that the vibrational bands at 510 and 841 cm-1 are not sufficient to state the formation of the β phase. The main aim of this work is devoted to develop a better understanding on the thermal stability of these several phases of PVDF, which has a longstanding ambiguity persisting in this area. It has been found that the in situ thermal FT-IR spectroscopy is one of the best alternatives to understand this important issue. It is ascertained that the β phase is the least thermally stable phase among α, β and γ phases, whereas the γ phase is the most thermally stable phase. KW - PVDF KW - thermal stability KW - β-phase KW - infrared spectroscopy KW - in situ thermal FT-IR study Y1 - 2017 U6 - https://doi.org/10.1080/01411594.2017.1337902 SN - 0141-1594 SN - 1029-0338 VL - 90 IS - 12 SP - 1205 EP - 1213 ER - TY - GEN A1 - Garain, Samiran A1 - Barman, Koushik A1 - Sinha, Tridib Kumar A1 - Jasimuddin, Sk A1 - Haeberle, Jörg A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Cerium(III) Complex Modified Gold Electrode: An Efficient Electrocatalyst for the Oxygen Evolution Reaction T2 - ACS Applied Materials and Interfaces N2 - Exploring efficient and inexpensive electrocatalysts for the oxidation of water is of great importance for various electrochemical energy storage and conversion technologies. In the present study, a new water-soluble [Ce III(DMF) (HSO4)3] complex was synthesized and characterized by UV−vis, photoluminescence, and high-resolution X-ray photoelectron spectroscopy techniques. Owing to classic 5d →4f transitions, an intense photoluminescence in the UV region was observed from the water-soluble [CeIII(DMF)(HSO4)3] complex. A stacking electrode was designed where self-assembled L-cysteine monolayer modified gold was immobilized with the synthesized cerium complex and was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltam-metry. The resulting electrode, i.e., [CeIII(DMF)(HSO4)3]−L-cysteine-Au stacks shows high electrocatalytic water oxidation behavior at an overpotential of η ≈0.34 V under neutral pH conditions. We also demonstrated a way where the overpotential is possible to decrease upon irradiation of UV light. KW - water oxidation KW - electrocatalyst KW - photoelectrocatalyst KW - photoluminescence KW - Ce(III)-complex KW - L-cysteine KW - gold electrode Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b05236 SN - 1944-8244 SN - 1944-8252 VL - 8 IS - 33 SP - 21294 EP - 21301 ER - TY - GEN A1 - Ghosh, Sujoy Kumar A1 - Biswas, Anirban A1 - Sen, Shrabanee A1 - Das, Chittaranjan A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Yb3+ Assisted Self-Polarized PVDF Based Ferroelectretic Nanogenerator: A Facile Strategy of Highly Efficient Mechanical Energy Harvester Fabrication T2 - Nano Energy N2 - Ytterbium (Yb3+) assisted porous poly(vinylidene fluoride) (PVDF) composite film comprising flexible ferroelectretic nanogenerator (FTNG) is highlighted where traditional poling treatment is completely avoided. The piezoelectric output of FTNG is realized by the co-operative activity of self-polarized -CH2/-CF2 dipoles with porous electret-like structure in the composite film. Owing to extraordinary ferroelectric and dielectric properties, FTNG is acting as a highly efficient mechanical energy harvester. It is capable to capture several forms of abundant mechanical energy arising from humanfinger movements, machine vibrations and sound waves. As a proof of concept, under compressive deformation, FTNG is enable to instantly powers up several consumer electronics and thus provides a promising strategy for achieving self-powered electronic devices. KW - PVDF KW - Yb 3+ KW - Porous ferroelectret material KW - Self-polarization KW - Ferroelectretic nanogenerator KW - Mechanical energy harvester KW - Self-powered electronics Y1 - 2016 U6 - https://doi.org/10.1016/j.nanoen.2016.10.042 SN - 2211-2855 VL - 2016 IS - 30 SP - 621 EP - 629 ER - TY - GEN A1 - Garain, Samiran A1 - Sinha, Tridib Kumar A1 - Adhikary, Prakriti A1 - Henkel, Karsten A1 - Sen, Shrabanee A1 - Ram, Shanker A1 - Sinha, Chittaranjan A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - Self-Poled Transparent and Flexible UV Light-Emitting Cerium Complex–PVDF Composite: A High-Performance Nanogenerator T2 - ACS Applied Materials & Interfaces N2 - Cerium(III)-,N-dimethylformamide-bisulfate [Ce(DMF)(HSO4)3] complex is doped into poly(vinylidene fluoride) (PVDF) to induce a higher yield (99%) of the electroactive phases (β- and γ-phases) of PVDF. A remarkable enhancement of the output voltage (∼32 V) of a nano-generator (NG) based on a nonelectrically poled cerium(III) complex containing PVDF composite film is achieved by simple repeated human finger imparting, whereas neat PVDF does not show this kind of behavior. This high electrical output resembles the generation of self-poled electroactiveβ-phase in PVDF due to the electrostatic interactions between the fluoride of PVDF and the surface-active positive charge cloud of the cerium complex via H-bonding and/or bipolar interaction among the opposite poles of cerium complex and PVDF, respectively. The capacitor charging capability of the flexible NG promises its applicability as piezoelectric-based energy harvester. The cerium(III) complex doped PVDF composite film exhibit an intense photoluminescence in the UV region, which might be due to a participation of electron cloud from negative pole of bipolarized PVDF. This fact may open a new area for prospective development of high-performance energy-saving flexible solid-state UV light emitters. KW - PVDF KW - electroactive phase KW - nanogenerator KW - cerium charge transfer complex KW - piezoelectric energy harvester KW - UV-emitter Y1 - 2015 U6 - https://doi.org/10.1021/am507522r SN - 1944-8244 SN - 1944-8252 VL - 2015 IS - 7 SP - 1298 EP - 1307 ER - TY - GEN A1 - Tamang, Abiral A1 - Ghosh, Sujoy Kumar A1 - Garain, Samiran A1 - Alam, Md. Mehebub A1 - Haeberle, Jörg A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - DNA-Assisted β‑phase Nucleation and Alignment of Molecular Dipoles in PVDF Film: A Realization of Self-Poled Bioinspired Flexible Polymer Nanogenerator for Portable Electronic Devices T2 - ACS Applied Materials & Interfaces N2 - A flexible nanogenerator (NG) is fabricated with a poly(vinylidene fluoride) (PVDF)film, where deoxyribonu-cleic acid (DNA) is the agent for the electroactive β-phase nucleation. Denatured DNA is co-operating to align the molecular−CH2/−CF2 dipoles of PVDF causing piezo- electricity without electrical poling. The NG is capable of harvesting energy from a variety of easily accessible mechanical stress such as human touch, machine vibration, football juggling, and walking. The NG exhibits high piezoelectric energy conversion efficiency facilitating the instant turn-on of several green or blue light-emitting diodes. The generated energy can be used to charge capacitors providing a wide scope for the design of self-powered portable devices. KW - PVDF KW - β-phase KW - DNA KW - self-poling KW - piezoelectric flexible nanogenerator Y1 - 2015 U6 - https://doi.org/10.1021/acsami.5b04161 SN - 1944-8244 SN - 1944-8252 IS - 7 SP - 16143 EP - 16147 ER - TY - CHAP A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - A polymer nanogenerator based on silver nanoparticles doped electrospun P(VDF-HFP) nanofibers T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The rising energy demand within the increasing mobility of human society has driven the development of new alternative power sources for portable devices with ultra-low electric power consumption. Based on its piezoelectric properties poly-vinylidene fluoride (PVDF) is a good candidate for mechanical energy harvesting for such devices. Moreover the copolymer poly(vinylidene fluoride-hexafluoropropylene) [P(VDF-HFP)] offers better film flexibility and cost-effectiveness than pure PVDF. We report on a polymer nanogenerator (PNG) based on electrospun P(VDF-HFP) nanofibers doped with silver nanoparticles (Ag-NPs). The electrospun fibers were characterized by FTIR, XPS, SEM and pressure imparting probe. It has been found that the yield of the piezoelectric phase is increased by the addition of Ag-NPs due to an interaction between surface charges of Ag-NPs and the molecular dipoles. Furthermore, defects in the P(VDF-HFP) electrospun fibers are removed. Accordingly, a significant enhancement in the output power of the PNG was found. Similar trends were also observed with Pd-NPs. KW - nanogenerator KW - PVDF KW - nanoparticles Y1 - 2015 UR - http://www.dpg-verhandlungen.de/year/2015/conference/berlin/part/ds/session/36/contribution/34?lang=en SN - 0420-0195 SP - S. 208 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Improved performance of a polymer nanogenerator based on silver nanoparticles doped electrospun P(VDF–HFP) nanofibers T2 - Physical Chemistry Chemical Physics N2 - We report on the electrospinning of poly(vinylidene fluoride–hexafluoropropylene) [P(VDF–HFP)] nanofibers doped with silver nanoparticles for the preparation of a polymer based nanogenerator (PNG). It has been found that the yield of the piezoelectric phase is increased by the addition of silver nanoparticles. Furthermore, defects in the P(VDF–HFP) electrospun fibers are removed resulting in a significant enhancement in the output power of the PNG. A maximum generated PNG output voltage of 3 V with a current density of 0.9 μA cm−2 is achieved. KW - piezoelectric thin polymer film KW - FTIR KW - nanogenerator KW - PVDF KW - P(VDF-HFP) KW - nanofibers Y1 - 2014 U6 - https://doi.org/10.1039/C3CP55238A SN - 1463-9084 SN - 1463-9076 VL - 2014 IS - 16 SP - 10403 EP - 10407 ER - TY - CHAP A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Control of the Crystalline Polymorph, Molecular Dipole and Chain Orientations in P(VDF-HFP) for High Electrical Energy Storage Application T2 - International Conference on Nanoscience, Technology and Societal Implications (NSTSI), 2011 Y1 - 2012 SN - 978-1-4577-2035-2 U6 - https://doi.org/10.1109/NSTSI.2011.6111801 PB - IEEE ER - TY - GEN A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - The electroactive Beta-phase formation in Poly(vinylidene fluoride) by gold nanoparticles doping T2 - Materials Letters Y1 - 2012 SN - 0167-577X IS - 73 SP - 123 EP - 125 ER - TY - CHAP A1 - Garain, Samiran A1 - Adhikary, Prakriti A1 - Mandal, Dipankar A1 - Sen, Shrabanee A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Electro-active β-Phase Formation in Poly(vinylidene fluoride) Films by Hydrated Rare earth Metal Salt T2 - Proceeding of the International Conference on Nanotechnology 2013 (ICNT 2013) N2 - Polyvinylidene fluoride (PVDF) is a typical fluoro-polymer with complicated polymorphisms due to the semi-crystalline nature. Generally, four crystalline phases, α, β, γ and δ may exist in PVDF crystals. The nonpolar α- and δ-phase has a monoclinic lattice with trans-gauche conformation (TGTG⁄), which is thermodynamically most stable for PVDF. The polar β phase with all-trans (TTTT) planar zigzag conformation is attractive for its piezo-, pyro-, and ferroelectric properties. The polar β-Phase and also semi-polar γ-phase (TTTGTTTG⁄) have obtained wide device applications such as acoustic transducers, piezoelectric sensors, energy harvesting generators, pyroelectric sensors, non-volatile memories and energy storage capacitors. In this work, we explore the possibility to nucleate β-phase in PVDF hydrated salt composite films by addition of the hydrated Rare earth metal salt, (NH4)4 Ce (SO4)4, 2H2O) for the piezo- ferro and high dielectric based device applications. It has been found that the water molecules in (NH4)4 Ce (SO4)4, 2H2O could form hydrogen bonds with PVDF during the crystallization process and the hydrogen bonds promoted the electro-active crystalline β- phase in PVDF with all -trans conformations. In addition, the DMF (solvent used for films preparation) can also assist the rare-earth based nanoparticle preparation, as a result the electrostatic interaction of the surface charge of the nanoparticles and molecular dipoles in PVDF can resist the electroactive β- phase in PVDF. KW - PVDF KW - β-Phase KW - piezoelectric Y1 - 2013 SN - 978-81-927756-0-9 SP - S. 127 PB - Institute of Technology, Haldia, WB, India CY - Haldia ER - TY - GEN A1 - Mandal, Dipankar A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - The effect of X-ray photoelectron spectroscopy measurement on P(VDF-TrFE) copolymer thin films T2 - Applied Surface Science N2 - The impact of prolonged X-ray irradiation during X-ray photoelectron spectroscopy (XPS) measurement was investigated on poly(vinylidene-trifluoroethylene) (P(VDF-TrFE)) thin films. It was observed that prolonged X-ray irradiation can accelerate the crosslinking of P(VDF-TrFE) and diminish the ferroelectric phase. Fourier transform infrared spectroscopy (FT-IR) data indicate that the ferroelectric phase diminishes completely after 360 kJ of X-ray irradiation dose and it induces the paraelectric phase. In this work, the main emphasis was given to the optimization of the X-ray irradiation dose during XPS measurements to maintain the ferroelectric phase within the copolymer films. KW - P(VDF-TrFE) copolymer thin film KW - XPS measurement KW - X-ray irradiation KW - Ferroelectric to paraelectric phase transformation Y1 - 2012 U6 - https://doi.org/10.1016/j.apsusc.2012.07.144 SN - 0169-4332 SN - 1873-5584 IS - 261 SP - 209 EP - 213 ER - TY - GEN A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Comment on "Preparation and Characterization of Silver-Poly(vinylidene fluoride) Nanocomposites:Formation of Piezoelectric Polymorph of Poly(vinylidene fluoride" Y1 - 2011 ER - TY - CHAP A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Das, Suken A1 - Schmeißer, Dieter ED - Heber, Jörg ED - Schlom, Darrell ED - Tokura, Yoshinori ED - Waser, Rainer ED - Wuttig, Matthias T1 - Control of β- and γ-Phase formation in electroactive P(VDF-HFP) films by silver nano-particle doping T2 - Frontiers in Electronic Materials: A Collection of Extended Abstracts of the Nature Conference Frontiers in Electronic Materials, June 17 to 20 2012, Aachen, Germany KW - P(VDF.HFP) KW - electroactive phase KW - nanoparticle doping KW - FTIR Y1 - 2012 SN - 978-3-527-41191-7 U6 - https://doi.org/10.1002/9783527667703.ch69 SP - 640 EP - 641 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Henkel, Karsten A1 - Lazareva, I. A1 - Mandal, Dipankar A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Koval, Yuri A1 - Müller, P. A1 - Schmeißer, Dieter T1 - Electrical investigations on metal/ferroelectric/insulator/semiconductor structures using Poly[vinylidene fluoride trifluoroethylene] as ferroelectric layer for organic nonvolatile memory applications KW - metal KW - frerroelectric KW - insulator KW - semiconductor Y1 - 2009 ER - TY - JOUR A1 - Schmeißer, Dieter A1 - Burkov, Yevgen A1 - Paloumpa, Ioanna A1 - Mandal, Dipankar A1 - Henkel, Karsten T1 - Microscopic and Spectroscopic Characterization of Interfaces and Dielectric Layers for OFET Devices Y1 - 2008 ER - TY - CHAP A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Lazareva, I. A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Electrical investigations on MFIS structures consisting P[VDF/TrFE] as ferro-electric layer for non-volatile memory applications T2 - Proceedings of 15th Workshop on Dielectrics in Microelectronics, Bad Saarow, 23 - 25 June 2008, Bad Saarow (Berlin) KW - MFIS, P[VDF/TrFE] KW - ferroelectric KW - non-volatile Y1 - 2008 SP - 159 EP - 160 ER - TY - THES A1 - Mandal, Dipankar T1 - Ultra-thin films of a ferroelectric copolymer: P(VDF-TrFE) KW - Grenzflächenchemie KW - Photoelektronenspektroskopie KW - Polymerfilm Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5628 UR - http://opus4.kobv.de/opus4-btu/frontdoor/index/index/docId/439 ER - TY - JOUR A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Ferroelectric properties of spin-coated ultrathin (down to 10nm) copolymer films KW - ferroelectric KW - spin-coated KW - copolymer Y1 - 2008 ER - TY - CHAP A1 - Mandal, Dipankar A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Dipole orientation of the P[VDF-TrFE] co-polymer films: A NEXAFS study T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - Ferroelectric properties of copolymers of vinylidene fluoride with trifluoroethylene (P[VDF-TrFE]) has become great deal of interest due to potential use in non volatile memory technology. Permanent dipoles (formed between the alternating hydrogen and fluorine atom within the copolymer) ordering of orientation are crucial for device efficiency. Here we focus on thickness dependence dipole orientation in these co-polymer films. In our systematic studies, we found there is prominent dipole re-orientation effect also for the intrinsic films (~10 nm thickness) before applying the electric field. It is observed after the application of the field, the dipoles re-oriented in opposite direction. Therefore, we conclude that the lowest thickness of the film should have well grown crystalline lamellae structure. As a result, c-axis of crystallites acts as well define manner in plane of the surface and for that reason the b-axis is more free. Because the b-axis is parallel to the polarization direction, it is easy to get a preferred orientation of the dipoles. For thicker films (here up to 100 nm), the average orientation effect is hindered, so a very low re-orientation effect has been observed. For this investigation, we used Near Edge X-ray Absorption Spectroscopy, at the U 49/2-PGM beam line of BESSY-II, Berlin. This work is supported by DFG within SPP1157 (SCHM 745/11-2). Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/sysa/session/5/contribution/76 SN - 0420-0195 SP - S. 840 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Interface reactions of ferroelectric copolymer layers with different electrode materials T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - The ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) is a possible material for low cost applications as organic nonvolatile memory element. We present an XPS interface investigation of the copolymer/electrode interface. Below 100nm film thickness, interface phenomena becomes important. Possible interface reactions could lead to a reduction of the ferroelectric functionality.We present a comparative study of the two interfaces Al/P(VDF-TrFE) and PEDOT:PSS/P(VDF-TrFE). The result is a clear indication of a surface reaction in between the Aluminum-electrodes. In contrast, for PEDOT:PSS the measurements shows a layer by layer formation of the interface PEDOT:PSS/PVDF without any reaction. Second, we present a study of remanent polarization of ultrathin spincoated films of the copolymer, in a thickness range from 5 to 100mn, with organic electrodes like PEDOT:PSS. The measurements are carried out by using the flatband shift of a capacitance-voltage (CV) characteristic. This shift of flatband voltage is used as value for the electric polarization of the polymer. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/sysa/session/5/contribution/16 SN - 0420-0195 SP - S. 830 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - JOUR A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Schmeißer, Dieter T1 - No interfacial layer for PEDOT electrodes on PVDF: Characterization of reactions at the interface P(VDF/TrFE)/Al and P(VDF/TrFE)/PEDOT:PSS Y1 - 2007 ER - TY - CHAP A1 - Mandal, Dipankar A1 - Müller, Klaus A1 - Seifarth, Olaf A1 - Hoffman, Patrick A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Study of reactions at the interface P(VDF/TrFE)/Al and P(VDF/TrFE)/PEDOT:PSS T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42 N2 - Due to potential use in non volatile memory application, Poly(vinylidene fluoride/trifluoroethylene) (P(VDF-TrFE)) is a great deal of interest, especially to produce organic field effect transistors (OFET). Right now it was found that Aluminum is one of the cost-effective inorganic electrode candidate. On the other hand, poly(3,4 ethylenedioxythiophene):poly(4-styrenesulfonate)(PEDOT:PSS) shows promising behavior for the application as organic electrode. In part of our investigations we have systematically studied surface interactions of organic ferroelectric thin films (P(VDF-TrFE))with inorganic (Al) and organic layers (PEDOT:PSS). By X-ray photoelectron spectroscopy (XPS) is has been found that there is a interfacial reaction with Al and the copolymer. In contrast, for electrodes, made of PEDOT: PSS, we found not such kind of behavior. In this case, we found no evidence for any surface reaction. Furthermore, we present our results concerning the orientation of permanent dipoles in the co-polymer (formed between hydrogen and fluorine atom). Here, we use Near-edge X-ray absorption fine structure (NEXAFS) analysis at the U 49/2 - PGM2 beam line of the BESSY-II Synchrotron. This work is supported by Deutsche Forschungsgemeinschaft (DFG) within priority program 1157 (DSCH 745/11-1). Y1 - 2007 UR - http://www.dpg-verhandlungen.de/year/2007/conference/regensburg/part/syoe/session/8/contribution/18 SN - 0420-0195 SP - S. 797 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Schmeißer, Dieter A1 - Tallarida, Massimo A1 - Henkel, Karsten A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Chumakov, Dmytro A1 - Zschech, Ehrenfried T1 - Characterization of oxidic and organic materials with synchrotron radiation based XPS and XAS KW - oxidic KW - organic KW - materials KW - synchrotron radiation KW - XPS KW - XAS Y1 - 2009 ER -