TY - CHAP A1 - Schmeißer, Dieter A1 - Müller, Sebastian A1 - Henkel, Karsten A1 - Müller, Klaus A1 - Wehner, Stefan T1 - In-situ analysis of moving reaction fronts for the bistable CO oxidation reaction on noble metal catalyst T2 - Extended Abstracts Book of First International Conference on Materials for Energy N2 - Experimental data on the reaction kinetics of catalytic processes are prerequisite for modeling of such reactions and their output. We investigate the CO oxidation on some noble metal catalysts, like Iridium(111) and Palladium(111) which is a bistable surface reaction. In a specific range of CO content in the feed gas islands of one or the other adsorbate nucleate and grow, which is recorded with photo electron emission microscopy (PEEM). During these transients the coverage on the surface changes from predominantly oxygen covered to predominantly CO covered resp. vice versa. But the resolution of PEEM and especially its unknown and nonlinear dependence of coverage of the two adsorbates (oxygen and CO) and image intensity make it impossible to extract the changes in coverage. On the other hand the reaction diffusion model based on the Langmuir-Hinshelwood-mechanism delivers the coverage of oxygen and carbon monoxide. The shapeand wall velocity of those islands has been connected perfectly to each other [CPL 423 (2006) 39], but not the absolute coverage and their variation during the reaction. Since the domain wall velocity is small on Iridium(111), this has opened the possibility for a detailed analysis of the changing coverage inside this domain wallutilizing synchrotron radiation and photo electron spectroscopy at BESSY II. The coverage profile of oxygen and CO inside a moving domain wall was measured for both cases using XPS spectra at O1s, C1s and the valence band during thereaction. Comparison with the reaction-diffusion-model and other catalytic surfaces, like Palladium(111) are done. KW - CO oxidation KW - Ir KW - Pd KW - photo electron emission microscopy (PEEM) Y1 - 2010 SN - 978-3-89746-117-8 SP - S. 932 PB - Dechema e.V. CY - Frankfurt ER - TY - CHAP A1 - Müller, Sebastian A1 - Schölzel, Mario T1 - Combining Hardware and Software Based Self Repair Methods for Statically Scheduled Data Paths T2 - 2010 IEEE 25th International Symposium on Defect and Fault Tolerance in VLSI Systems (DFT 2010), Kyoto, Japan, 6 - 8 October 2010 KW - Prozessoren KW - Zuverlässigkeit KW - Selbstreparatur Y1 - 2010 SN - 978-1-424-48447-8 N1 - IEEE Computer Society SP - 90 EP - 98 PB - IEEE CY - Piscataway, NJ ER - TY - THES A1 - Müller, Sebastian T1 - Synchrotron radiation spectroscopy studies of the initial interaction of Chromium and Cobalt with the surface of Titanium Dioxide N2 - In the framework of this thesis, synchrotron radiation based spectroscopy methods are applied to study the electronic structures of stoichiometric Rutile single crystals and TiO2 thin films, and the initial stage of chromium and cobalt growth on TiO2 thin films. Resonance photoemission spectroscopy of clean TiO2 at the Ti L2,3 edges led to Auger-like features, with kinetic energies corresponding to the Ti L2,3M4,5M4,5 Auger decay channels. The presence of these features is assigned to origin from a d2L2 charge transfer state. The resonance of the Ti L3M2,3V Auger channel at the Ti L2 edge is assigned to the L2L3V Coster-Kronig Auger, followed by the normal L3M2,3V Auger decay. The deposition of chromium on the TiO2 film causes a strong interaction at the interface, in which TiO(2-x) is formed together with chromium in the Cr 3+ state. Besides the oxidized component, contribution of metallic chromium is found as well. In the ultra-low coverage regime, post-deposition oxidation is observed, in which metallic chromium is oxidized to Cr2O3, accompanied by re-oxidation of the substrate to TiO2. The interface reaction is also reflected by the appearance of two defect states in the band gap. Resonant photo-emission at the Cr 2p and Ti 2p edges shows well distinguishable Cr 3d respectively Ti 3d character of the respective states. Indications for self-cleaning properties are found by removal of surface carbon during storage in UHV, but the influence of chromium on these properties is not studied in detail. The interaction between cobalt and TiO2 is weaker than that of chromium and TiO2. Nevertheless, an interface reaction is found, in which some of the deposited cobalt is oxidized, while the oxide support is partly reduced. The particular oxidation state of Cobalt is identified by means of multiplet calculation including charge transfer and crystal field effects. The calculated XAS and XPS spectra indicate Co 2+ in a tetrahedral coordination with four oxygen atoms. The metallic component of cobalt gives rise to a broad resonance in the valence band down to -20 eV, with a pronounced satellite feature that reflects the oxidized component. KW - Titanium dioxide KW - Metal/metal-oxide interaction KW - Multiplet-calculation KW - Resonant photoemission Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-18914 UR - http://opus.kobv.de/btu/volltexte/2010/1891/ ER - TY - CHAP A1 - Hettchen, Sebastian A1 - Pinkepank, Heidi A1 - Scharnholz, Lars A1 - Müller, Tim S. ED - Bayerl, Günter ED - Belzyt, Leszek C. T1 - Ślady przemysłu od Lauchhammer do Nowej Soli KW - Industrie Kulturlandschaft Geschichte, Niederlausitz, Lubuskie, Lauchhammer, Plessa, Domsdorf, Lichterfeld, Cottbus, Peitz, Forst, Sommerfeld, Sorau, Sagan, Grünberg, Neusalz Y1 - 2014 SP - 133 EP - 173 PB - be.bra Wissenschaft Verlag GmbH CY - Berlin ET - 1. Auflage ER - TY - CHAP A1 - Müller, Jens A1 - Kreuz, Sebastian A1 - Höhl, Wolfgang A1 - Lüdecke, Volker ED - Pivec, Maja ED - Gründler, Josef T1 - A Process full of Challenges – A Serious Game About the German Energy Transition T2 - Proceedings of the 11th European Conference on Games Based Learning , Graz, Austria, 5-6 October 2017 Y1 - 2017 SN - 978-1-911218-57-9 SN - 978-1-911218-56-2 SP - 456 EP - 463 PB - Academic Conferences and Publishing International CY - Reading ER - TY - RPRT A1 - Thonicke, Kirsten A1 - Rahner, Eva A1 - Arneth, Almut A1 - Bartkowski, Bartosz A1 - Bonn, Aletta A1 - Döhler, Christian A1 - Finger, Robert A1 - Freitag, Jens A1 - Grosch, Rita A1 - Grossart, Hans-Peter A1 - Grützmacher, Kim A1 - Hartman Scholz, Amber A1 - Häuser, Christoph A1 - Hickler, Thomas A1 - Hölker, Franz A1 - Jähnig, Sonja C. A1 - Jeschke, Jonathan A1 - Kassen, Rees A1 - Kastner, Thomas A1 - Kramer-Schadt, Stephanie A1 - Krug, Cornelia A1 - Lakner, Sebastian A1 - Loft, Lasse A1 - Matzdorf, Bettina A1 - Meakins, Felicity A1 - De Meester, Luc A1 - Monaghan, Michael T. A1 - Müller, Daniel A1 - Overmann, Jörg A1 - Quaas, Martin A1 - Radchuk, Viktoriia A1 - Reyer, Christopher A1 - Roos, Christian A1 - Scholz, Imme A1 - Schroer, Sibylle A1 - Sioen, Giles Bruno A1 - Sommer, Simone A1 - Sommerwerk, Nike A1 - Tockner, Klement A1 - Turk, Zachary A1 - Warner, Barbara A1 - Wätzold, Frank A1 - Wende, Wolfgang A1 - Veenstra, Tonjes A1 - Voort, Hein van de T1 - 10 Must-Knows aus der Biodiversitätsforschung Y1 - 2022 U6 - https://doi.org/10.5281/zenodo.6257476 PB - Potsdam-Institut für Klimafolgenforschung e.V. (PIK) CY - Potsdam ER - TY - CHAP A1 - Schölzel, Mario A1 - Koal, Tobias A1 - Müller, Sebastian A1 - Scharoba, Stefan A1 - Röder, Stefanie A1 - Vierhaus, Heinrich Theodor T1 - A Comprehensive Software-Based Self-Test and Self-Repair Method for Statically Scheduled Superscalar Processors T2 - 17th IEEE Latin-American Test Symposium - LATS 2016 Y1 - 2016 SN - 978-1-5090-1331-9 SP - 33 EP - 38 PB - IEEE CY - Piscataway, NJ ER - TY - RPRT A1 - Schmidt, Peer A1 - Donath, Ines A1 - Wels, Martin A1 - Pinnau, Sebastian A1 - Grau Turuelo, Constantino A1 - Breitkopf, Cornelia A1 - Hack, Klaus A1 - Baben, Moritz to A1 - Reis, Bruno A1 - Müller, Michael A1 - Sergeev, Dmitry A1 - Qi, Jia T1 - PCM Screening - Evaluierung eutektischer Gemische für den Einsatz als PCM: thermodynamische Modellierung und experimentelle Methoden : Energie Speicher: PCM-Screening : Schlussbericht N2 - Ein wichtiges Ziel der Bundesregierung ist der Ausbau des Anteils erneuerbarer Energien an der gesamten Stromerzeugung. Die Entwicklung optimierter Wärme- und Kältespeicher stellt einen wichtigen Baustein bei der Erreichung dieser Zielstellung dar. Elektrisch betriebene Wärmepumpen und Kompressionskältemaschinen sowie dezentrale Klein-BHKW bieten in Verbindung mit entsprechend dimensionierten, thermischen Speichern ein großes Potential zum Lastmanagement in Smart Grids und somit zur Netzintegration von Strom aus erneuerbaren Energien. Die im Projekt entwickelte Methodik zur Suche nach neuen Latentspeichermedien kann für ein breites Anwendungsfeld von Heiz- und Kühlanwendungen in Gebäuden bis hin zur Kraftwerkstechnik eingesetzt werden. Innerhalb der Fördermaßnahme „Anwendungsorientierte Forschung und Entwicklung zur nichtnuklearen Energieforschung“ im 6. Energieforschungsprogramm der Bundesregierung wurde durch die Projektarbeiten das Schwerpunktthema Energiespeicher (3.8) adressiert, wobei der Aspekt der Entwicklung neuer Materialien mit reduzierten Kosten für einen wirtschaftlichen Betrieb im Vordergrund stand. Speziell wurden dabei die Unterpunkte 3.8.4 Thermische Speicher zur Weiterentwicklung, Optimierung und Erprobung von PCM sowie 3.8.5 Übergeordnete Themen mit Modellen und Simulationswerkzeugen für die Auswahl und Bewertung neuer Speichermaterialien adressiert. Die Projektergebnisse besitzen aber auch Berührungspunkte mit den Schwerpunkten 3.12 Energieeffizienz in Industrie, Gewerbe, Handel und Dienstleistungen sowie 3.4 Solarthermische Kraftwerke, da mit der entwickelten Screening-Methode für diese Anwendungsfälle neue Wärmespeichermaterialien auf der Basis wasserfreier Salze mit höheren Prozesstemperaturen gefunden werden können. Durch den Einsatz von Methoden zur Modellierung und Simulation von Prozessen erfolgt gleichermaßen die Umsetzung einer energie- und ressourcenschonenden Forschungstätigkeit. Das im Projekt entwickelte Vorgehen hilft dabei, einen äußerst sparsamen Einsatz von Chemikalien, eine niedrige Belastung der Umwelt durch verringerten Entsorgungsaufwand der verbrauchten Stoffe sowie einen deutlich geringeren Aufwand und Energieeinsatz für die Messtechnik zu ermöglichen. Damit wurde zugleich das Schwerpunktthema 3.8.5 Modelle und Simulationswerkzeuge für die Auswahl und Bewertung neuer Speichermaterialien angesprochen. KW - Latentwärmespeicher KW - Phase diagram KW - Thermodynamic modeling KW - Thermal analysis Y1 - 2021 UR - https://www.tib.eu/de/suchen/id/TIBKAT:177643451X/ U6 - https://doi.org/10.2314/KXP:177643451X PB - TIB – Leibniz-Informationszentrum Technik und Naturwissenschaften CY - Hannover ER - TY - RPRT A1 - Bett, Andreas W. A1 - Erlach, Berit A1 - Gölz, Sebastian A1 - Gutnik, Magdalena A1 - Hentschel, Anja A1 - Hirschl, Bernd A1 - Hübner, Gundula A1 - Kienzlen, Volker A1 - Matthies, Ellen A1 - Müller, Florian J. Y. A1 - Münch, Wolfram A1 - O'Sullivan, Marlene A1 - Rech, Bernd A1 - Reusswig, Fritz A1 - Schöbel-Rutschmann, Sören A1 - Schomerus, Thomas A1 - Stryi-Hipp, Gerhard T1 - Vorschläge für einen klimagerechten Ausbau der Photovoltaik und Windenergie N2 - Photovoltaik- und Windenergieanlagen spielen eine Schlüsselrolle für eine klimagerechte Energieversorgung. Zukünftig werden sie einen Großteil des Energiebedarfs decken – auch in den Sektoren Wärme und Verkehr. Studien zeigen: Für Klimaneutralität 2045 muss die Ausbaugeschwindigkeit auf das Drei- bis Vierfache der letzten Jahre erhöht werden. Komplexe und langwierige Planungs- und Genehmigungsverfahren, zu wenig ausgewiesene Flächen und eine unzureichende Bürgerbeteiligung hemmen jedoch den Ausbau. Das Impulspapier „Vorschläge für einen klimagerechten Ausbau der Photovoltaik und Windenergie“ einer interdisziplinären Arbeitsgruppe des Akademienprojekts Energiesysteme der Zukunft (ESYS) nennt zwölf Handlungsoptionen, um Hemmnisse abzubauen und die Ausbaugeschwindigkeit auf die erforderlichen 15 bis 25 Gigawatt pro Jahr zu beschleunigen. KW - Photovoltaik KW - Windenergie KW - Solarenergie KW - Ausbau erneuerbarer Energien Y1 - 2021 UR - https://energiesysteme-zukunft.de/publikationen/stellungnahme/ausbau-photovoltaik-und-windenergie ER - TY - CHAP A1 - Müller, Sebastian A1 - Schmeißer, Dieter T1 - Synchrotron radiation spectroscopy studies of the initial interaction between cobalt and titanium dioxide T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - Small metallic particles deposited on oxide surfaces can serve as heterogeneous catalysts, as for example TiO2 supported cobalt is a known Fischer-Tropsch-Catalyst. The goal of the presented studies is to investigate the interaction between cobalt and TiO2 in the initial step of growth by synchrotron radiation based spectroscopy. PES studies of TiO2 supported cobalt show a reduction of the oxide support, accompanied by an oxidation of the deposited material. The oxidation is not complete, but metallic cobalt is found already in the very first step of growth. Uniform decrease of both substrate PES lines indicate very weak interaction between overlayer and TiO2. An atomic multiplet calculation including charge transfer and crystal field effects is applied to simulate the experimental Co 2p XAS and XPS spectra of the oxidized component. The results allow the identification of the local coordination as well as the identification of the oxidation state of cobalt. Y1 - 2010 SN - 0420-0195 SP - S. 652 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -