TY - GEN A1 - Müller, David T1 - Lösung von NIMBY-Problemen beim Ausbau des deutschen Stromnetzes T2 - Zeitschrift für öffentliche und gemeinwirtschaftliche Unternehmen KW - Spieltheorie KW - Energiewende KW - Netzausbau Y1 - 2016 SN - 0344-9777 VL - 39 IS - 3 SP - 248 EP - 269 ER - TY - CHAP A1 - Sagradov, Olga A1 - Müller, David ED - Kümpel, Thomas ED - Schlenkrich, Kay ED - Heupel, Thomas T1 - Verbesserung der Prognosequalität im Personalcontrolling T2 - Controlling & Innovation 2022, Gesundheitswesen N2 - Für das langfristige Bestehen eines Unternehmens ist es notwendig, schnell und gezielt auf ständige Umweltveränderungen zu reagieren. Die Reaktionsgeschwindigkeit auf zukünftige Veränderungen hängt von der Fähigkeit des Unternehmens ab, mögliche Szenarien für die Entwicklung der internen sowie externen Umgebung vorherzusagen. Die Controlling-Abteilungen, welche regulär kurz-, mittel- und langfristige Prognosen vorbereiten müssen, erhalten heutzutage neue Möglichkeiten in der Auswahl der Forecast-Instrumentarien. Die Regressionsmodelle sowie Predictive Analytics und vor allem Machine Learning stellen keine neuen Analysemethoden dar, jedoch finden sie eher selten Anwendung in Controlling und Planung der Unternehmen. Einer der möglichen Anwendungsbereiche der fortgeschrittenen Analytics im Unternehmenscontrolling stellt die Krankheitsanalyse bzw. -vorhersage dar. Mit dem Ausfall der Arbeitskräfte sind abhängig von der Unternehmenstätigkeit hohe Kosten verbunden. Steigende Aufmerksamkeit zum Thema Gesundheitsmanagement in Unternehmen fordert ebenso die Erstellung aussagekräftiger Analytics, um die entsprechenden Maßnahmen strategisch zu planen. Anhand von Daten eines ostdeutschen Großunternehmens beantworten die Autoren die Frage, wie sich die Prognosequalität des Krankheitsstandes mittels Regressionsmodellen und Predictive Analytics verbessern lässt. Abschließend sind aus dem Beitrag der Nutzen und die Herausforderungen der Anwendung von fortgeschrittenen Prognosemethoden im Personalcontrolling zu entnehmen. KW - Trends Controlling KW - Controlling Entwicklungen KW - Controller KW - Machine Learning in Controlling Y1 - 2022 SN - 978-3-658-36483-0 SN - 978-3-658-36484-7 U6 - https://doi.org/10.1007/978-3-658-36484-7 SN - 2625-7114 SN - 2625-7122 SP - 95 PB - Springer Gabler CY - Wiesbaden ER - TY - GEN A1 - Müller, Klaus A1 - Städter, Matthias A1 - Rachow, Fabian A1 - Hoffmannbeck, David A1 - Schmeißer, Dieter T1 - Sabatier-based CO2-methanation by catalytic conversion T2 - Environmental Earth Sciences N2 - The catalytic conversion of CO2is an important component for the reintegration of secondary products like CO2 or H2 into the energy supply. An example is the "power to gas’" concept with a conversion of CO2 into CH4. The CO2 is transferred into a carrier of chemical energy, with the possibility to feed the produced CH4 into the existing network of natural gas. At temperatures of around 350 °C, hydrogenation of CO2 to CH4 is possible by the Sabatier reaction CO2+4H2->CH4+H2O. One prerequisite for efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. The focus of catalyst development is given to their performance under the conditions to be expected in the special application. As a part of the project Geoenergy-Research (GeoEn), we address questions related to the catalytic utilization of CO2 produced in the course of the oxyfuel combustion of lignite. In this contribution, we report on the experimental setup in laboratory scale, which enables an advanced characterization of the catalytic performance, including thermodesorption measurements at atmospheric pressure in order to determine the amount of adsorbed CO2 under real conditions. We also show data for activation energies, the catalytic performance as function of temperature and the long time stability of a commercial Ru-based catalyst. KW - CO2 KW - Sabatier reaction KW - Catalysis KW - RuO2 Y1 - 2013 U6 - https://doi.org/10.1007/s12665-013-2609-3 SN - 1866-6280 VL - 70 IS - 8 SP - 3771 EP - 3778 ER - TY - CHAP A1 - Müller, Klaus A1 - Hoffmannbeck, David A1 - Kirner, Georg A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - CO2-Methanation by Catalytic Conversion T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The utilization of CO2 as raw material is an important component of a program for CO2 reduction. A possibility is the production of methane. At a moderate temperature of around 350°C, hydrogenation of CO2 to methane is possible by the Sabatier reaction CO2 + 4H2 ->CH4 +2H2O. Prerequisite for an efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. In this contribution, we present investigations of Ru and Ni catalysts on different substrates. For Ru/Al2O3 catalysts, we found stable operation without degradation within 500 hours with a conversion rate of 80% at 350°C. For NiO/SiO2 catalysts, a conversion rate of 90% was found for temperatures of 350-405°C. We also show the investigation of cross sensitivities against SOx and NOx, which are typical contaminations of CO2, generated by the industrial oxyfuel process. In our work the morphology (REM, AFM, specific surface), chemical composition (FTIR, XPS) and phase composition (XRD) of the catalysts are characterized. In addition, we report on thermodesorption (TDS) measurements at atmospheric pressure to determine the amount of adsorbed CO2 under real conditions. The project is funded by the German Ministry of Research and Education (BMBF-GeoEn). Y1 - 2012 UR - http://www.dpg-verhandlungen.de/year/2012/conference/berlin/part/ds/session/37/contribution/45 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - BOOK A1 - Müller, David T1 - Investitionsrechnung und Investitionscontrolling N2 - Investitionen als eine wesentliche Grundlage unternehmerischer Tätigkeit sind durch komplexe Entscheidungsprozesse gekennzeichnet. Zentrale Aufgabe des Investitionscontrollings ist deshalb die Unterstützung der Planung, Realisierung und Umsetzung dieser Entscheidungen. Damit diese Aufgabe bestmöglich erfüllt werden kann, wurde die vorliegende Auflage neu strukturiert. Die Eigenschaften des Investitionsprozesses und des Investitionscontrollings werden in den ersten beiden Kapiteln vorgestellt. Im Anschluss daran werden die Grundlagen der Entscheidungstheorie dargelegt. Diese werden üblicherweise als Einzelentscheidungen betrachtet, jedoch sind Investitionsentscheidungen in den seltensten Fällen Individualentscheidungen. In der Regel sind mehrere Mitarbeiter und Abteilungen in die Entscheidungsprozesse eingebunden. Es liegt nahe, neben den Individualentscheidungen auch kollektive Entscheidungen zu berücksichtigen. Aus diesem Grund werden Theorie und Praxis kollektiver Entscheidungen in einem eigenständigen Kapitel beleuchtet. Neben der Entscheidungstheorie bildet die Investitionstheorie das klassische Fundament zur Unterstützung von Investitionsentscheidungen. Die grundlegenden Verfahren für Situationen unter Sicherheit werden ebenso vorgestellt wie die Verfahren für Entscheidungen unter Unsicherheit. Eine ganze Reihe von Investitionen wird nicht durch einen einzelnen Akteur (z.B. Unternehmen, Kostenstelle, Gemeinde) sondern als Gemeinschaftsinvestitionen durch mehrere Akteure realisiert. Die kooperative Spieltheorie ist in der Lage, für eine gerechte Nutzenaufteilung zu sorgen. Deshalb ist diesem Bereich ein umfangreiches Kapitel mit vielen Anwendungsbeispielen gewidmet. KW - Controlling KW - Entscheidungs- und Spieltheorie KW - Gemeinschaftsinvestitionen KW - Investitionscontrolling KW - Investitionsrechnung KW - Wertorientierte Unternehmensführung KW - Individuelle Entscheidungen KW - Kollektive Entscheidungen KW - Kooperative Spieltheorie KW - Investitionsrechenverfahren KW - Investitionsrechenverfahren unter Sicherheit KW - Investitionsrechenverfahren und Unsicherheit Y1 - 2019 SN - 978-3-662-57608-3 SN - 978-3-662-57609-0 U6 - https://doi.org/10.1007/978-3-662-57609-0 PB - Springer CY - Berlin [u.a.] ET - 2. Auflage ER - TY - CHAP A1 - Müller, David ED - Müller, David T1 - Analyse der Improvisation als Problemlösungsalternative in KMU T2 - Controlling für kleine und mittlere Unternehmen Y1 - 2017 SN - 978-3-11-051487-2 U6 - https://doi.org/10.1515/9783110517163-016 SP - 393 EP - 427 PB - De Gruyter-Oldenbourg CY - München ET - 2. Auflage ER - TY - GEN A1 - Müller, David T1 - A reply to Ponte et al. (2016) supply chain collaboration: some comments on the Nucleolus of the beer game T2 - Journal of Industrial Engineering and Management KW - Spieltheorie Y1 - 2018 UR - https://www.jiem.org/index.php/jiem/article/view/2430 U6 - https://doi.org/10.3926/jiem.2430 SN - 2013-8423 VL - 11 IS - 3 SP - 528 EP - 534 ER - TY - GEN A1 - Schmidt, Simon David A1 - Ammar, Kais A1 - Dornisch, Wolfgang A1 - Forest, Samuel A1 - Müller, Ralf T1 - Phase field model for the martensitic transformation: comparison of the Voigt/Taylor and Khachaturyan approach T2 - Continuum Mechanics and Thermodynamics Y1 - 2021 U6 - https://doi.org/10.1007/s00161-021-01007-1 SN - 0935-1175 SN - 1432-0959 VL - 33 IS - 5 SP - 2075 EP - 2094 ER - TY - GEN A1 - Dornisch, Wolfgang A1 - Schrade, David A1 - Wolf, Jana A1 - Müller, Ralf T1 - Numerical methods for the modeling of the magnetization vector in multiferroic heterostructures T2 - Proceedings in Applied Mathematics and Mechanics, Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar 2017) N2 - Multiferroic heterostructures are commonly used to obtain electro‐magnetic coupling effects. Thereby, the ferroelectric layer is used to control the magnetization in the ferromagnetic layer. The coupling between the layers is obtained by the mechanical coupling between the layers, which have well‐defined interfaces. Within this contribution we use phase field models to define the polarization and magnetization in the ferroelectric and ferromagnetic layers, respectively. A coupling between polarization/magnetization and strains in each layer in combination with coherent deformations at the interface yields an electromagnetic coupling within the entire heterostructure. Numerical formulations for the interpolation of the polarization vector are well‐defined in the literature. However, the establishment of a consistent numerical formulation for the ferromagnetic layer, where the length of the magnetization vector has to be constant, remains a difficult task. We propose a new numerical approach for the consistent treatment of the ferromagnetic layer and provide numerical simulations which illustrate the electromagnetic coupling effect. Y1 - 2017 U6 - https://doi.org/10.1002/pamm.201710221 SN - 1617-7061 VL - 17 IS - 1 SP - 503 EP - 504 PB - WILEY-VCH Verlag GmbH & Co. KGaA CY - Weinheim ER - TY - GEN A1 - Hannan, Azmin Nasrin A1 - Seidlitz, Holger A1 - Hartung, David A1 - Kuke, Felix A1 - Ambrosio, Marcello A1 - Müller, Marco T1 - Sustainability and Circular Economy in Carbon Fiber-Reinforced Plastics T2 - Materials Circular Economy N2 - Carbon fiber-reinforced plastic (CFRP) components are known for their exceptional resilience and ultra-lightweight nature, making them the preferred choice for applications requiring high mechanical loads with minimal weight. However, the intricate and anisotropic structure of CFRP components poses challenges, resulting in expensive repairs and testing. This complexity also leads to increased waste generation. Yet, innovative recycling processes offer a solution by reintegrating carbon components into a closed material cycle, promoting sustainability and circular economy principles. This work focuses on recycled CFs (rCFs) obtained through a continuous recycling method for CFRP primary recyclate from composite pressure vessel. Furthermore, re-purposing of the separated matrix material for secondary energy sources makes the process, a 100% recycling route. This closed-loop approach addresses conventional pyrolysis challenges and contributes to more efficient utilization of CFRP waste components. rCF and recycled polyethylene terephthalate (rPET) polymers were compounded through an extrusion process. Test specimens were then fabricated according to standard test norms to evaluate the resulting tensile and bending properties. The tensile and flexural modulus of the rCF-rPET obtained are 6.80 and 4.99 GPa, respectively. The need for enhancing the quality of rCF is apparent. Suggestive and potential implications and the marketability of rCF-rPET compounds are also discussed. KW - Sustainability KW - Circular Economy KW - Carbon Fiber-Reinforced Plastics Y1 - 2024 U6 - https://doi.org/10.1007/s42824-024-00111-2 SN - 2524-8146 VL - 6 IS - 1 PB - Springer Science and Business Media LLC ER -