TY - CHAP A1 - Müller, David A1 - Müller, Martin ED - Funk, Wilfried ED - Rossmanith, Jonas T1 - Ermittlung fairer Transferpreise in internationalen Unternehmen T2 - Internationale Rechnungslegung und Internationales Controlling Y1 - 2017 SN - 978-3-658-16103-3 SN - 978-3-658-16104-0 U6 - https://doi.org/10.1007/978-3-658-16104-0 SP - 341 EP - 361 PB - Gabler CY - Wiesbaden ER - TY - CHAP A1 - Müller, David ED - Petersen, Karl ED - Zwirner, Christian ED - Brösel, Gerrit T1 - Realoptionsmodelle T2 - Handbuch Unternehmensbewertung Y1 - 2013 SN - 978-3-89817-917-1 SP - 328 EP - 340 PB - Bundesanzeiger-Verlag CY - Köln ER - TY - GEN A1 - Müller, David T1 - Optimal exercise and profit sharing of joint real investments in the energy industry T2 - Problems and Perspectives in Management Y1 - 2013 SN - 1727-7051 SN - 1810-5467 VL - Vol. 11 IS - 3 SP - 24 EP - 36 ER - TY - BOOK A1 - Müller, David T1 - Betriebswirtschaftslehre für Ingenieure N2 - Ingenieure tragen wesentlich dazu bei, dass Unternehmen ihre Ziele erreichen und wirtschaftlich erfolgreich sind. Dafür ist einerseits betriebswirtschaftliches Know-how Voraussetzung sowie andererseits ein Grundverständnis des Zusammenwirkens von Technik und Ökonomie unter Berücksichtigung wirtschaftlicher Konsequenzen sowie unternehmerischer Rahmenbedingungen. Beide Seiten angemessen zu berücksichtigen und deren Zusammenspiel darzustellen, ist zentrales Anliegen des vorliegenden Buches. Neben den klassischen Grundlagenbereichen (Produktion, Absatz und Marketing, Finanzierung, Jahresabschluss und Unternehmensführung) werden spezielle Themen aus der Kosten- und Investitionsrechnung vertiefend präsentiert, die eine hohe Affinität zur Ingenieurstätigkeit aufweisen. Darüber hinaus ist in der zweiten Auflage dem Bereich der Produktplanung und Produktgestaltung ein eigenständiges Kapitel gewidmet worden. In allen anderen Kapiteln wurden die entsprechenden Normen und Richtlinien integriert. KW - Betriebswirtschaftslehre KW - Grundlagen KW - Ingenieure KW - Rechnungswesen KW - Unternehmensführung Y1 - 2013 SN - 978-3-642-36056-5 SN - 978-3-642-36057-2 PB - Springer Gabler CY - Berlin ET - 2. Auflage ER - TY - GEN A1 - Müller, Klaus A1 - Städter, Matthias A1 - Rachow, Fabian A1 - Hoffmannbeck, David A1 - Schmeißer, Dieter T1 - Sabatier-based CO2-methanation by catalytic conversion T2 - Environmental Earth Sciences N2 - The catalytic conversion of CO2is an important component for the reintegration of secondary products like CO2 or H2 into the energy supply. An example is the "power to gas’" concept with a conversion of CO2 into CH4. The CO2 is transferred into a carrier of chemical energy, with the possibility to feed the produced CH4 into the existing network of natural gas. At temperatures of around 350 °C, hydrogenation of CO2 to CH4 is possible by the Sabatier reaction CO2+4H2->CH4+H2O. One prerequisite for efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. The focus of catalyst development is given to their performance under the conditions to be expected in the special application. As a part of the project Geoenergy-Research (GeoEn), we address questions related to the catalytic utilization of CO2 produced in the course of the oxyfuel combustion of lignite. In this contribution, we report on the experimental setup in laboratory scale, which enables an advanced characterization of the catalytic performance, including thermodesorption measurements at atmospheric pressure in order to determine the amount of adsorbed CO2 under real conditions. We also show data for activation energies, the catalytic performance as function of temperature and the long time stability of a commercial Ru-based catalyst. KW - CO2 KW - Sabatier reaction KW - Catalysis KW - RuO2 Y1 - 2013 U6 - https://doi.org/10.1007/s12665-013-2609-3 SN - 1866-6280 VL - 70 IS - 8 SP - 3771 EP - 3778 ER - TY - BOOK A1 - Müller, David T1 - Investitionscontrolling N2 - Investitionen als eine wesentliche Grundlage unternehmerischer Tätigkeit sind durch komplexe Entscheidungsprozesse gekennzeichnet. Die Unterstützung der Unternehmensführung bei der Planung, Umsetzung und Kontrolle dieser Entscheidungen ist zentrale Aufgabe des Investitionscontrollings. Die ersten beiden Kapitel dieses Lehrbuchs sind der Darstellung der Führungsprozesse von Investitionen und einer umfassenden Einführung in die konzeptionellen Grundlagen des Investitionscontrollings gewidmet. Darauf aufbauend folgen zwei Kapitel zur Entscheidungstheorie. Da Entscheidungen über Investitionen in den seltensten Fällen von Einzelpersonen getroffen werden, wird neben der Theorie der Individualentscheidung auch die Theorie der Kollektiventscheidung vorgestellt. Beide Bereiche ruhen auf zwei Pfeilern: einem präskriptiven und einem deskriptiven Teil, welche in die Darstellungen integriert werden. Im Anschluss an diese Ausführungen werden die grundlegenden Verfahren der Investitionsrechnung erläutert – für Situationen unter Sicherheit ebenso wie für Entscheidungen unter Unsicherheit. Der Leser kann die vorgestellten Inhalte auf circa einhundert Seiten durch Übungsaufgaben mit Lösungen vertiefen. KW - Controlling KW - Entscheidungs- und Spieltheorie KW - Gemeinschaftsinvestition KW - Investitionscontrolling KW - Investitionsrechnungen KW - Wertorientierte Unternehmensführung Y1 - 2014 SN - 978-3-642-41989-8 SN - 978-3-642-41990-4 PB - Springer CY - Berlin [u.a.] ER - TY - CHAP A1 - Müller, David ED - Meyer, Jörn-Axel T1 - Faire Verteilung von Synergieeffekten im Rahmen kooperativer Umweltschutzinvestitionen T2 - Energie- und Umweltmanagement in kleinen und mittleren Unternehmen Y1 - 2014 SN - 978-3-8441-0357-1 SP - 49 EP - 77 PB - Eul Verlag CY - Lohmar ER - TY - CHAP A1 - Müller, Klaus A1 - Hoffmannbeck, David A1 - Kirner, Georg A1 - Städter, Matthias A1 - Schmeißer, Dieter T1 - CO2-Methanation by Catalytic Conversion T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The utilization of CO2 as raw material is an important component of a program for CO2 reduction. A possibility is the production of methane. At a moderate temperature of around 350°C, hydrogenation of CO2 to methane is possible by the Sabatier reaction CO2 + 4H2 ->CH4 +2H2O. Prerequisite for an efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. In this contribution, we present investigations of Ru and Ni catalysts on different substrates. For Ru/Al2O3 catalysts, we found stable operation without degradation within 500 hours with a conversion rate of 80% at 350°C. For NiO/SiO2 catalysts, a conversion rate of 90% was found for temperatures of 350-405°C. We also show the investigation of cross sensitivities against SOx and NOx, which are typical contaminations of CO2, generated by the industrial oxyfuel process. In our work the morphology (REM, AFM, specific surface), chemical composition (FTIR, XPS) and phase composition (XRD) of the catalysts are characterized. In addition, we report on thermodesorption (TDS) measurements at atmospheric pressure to determine the amount of adsorbed CO2 under real conditions. The project is funded by the German Ministry of Research and Education (BMBF-GeoEn). Y1 - 2012 UR - http://www.dpg-verhandlungen.de/year/2012/conference/berlin/part/ds/session/37/contribution/45 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Müller, David T1 - Abstimmungen gerechter gestalten T2 - Controlling & Management Review Y1 - 2015 SN - 2195-8262 SN - 2195-8270 VL - 59 IS - 5 SP - 52 EP - 58 ER - TY - GEN A1 - Müller, David T1 - Erweiterung des Instrumentariums des Kooperationscontrollings durch Lösungskonzepte der kooperativen Spieltheorie - eine Analyse T2 - Betriebswirtschaftliche Forschung und Praxis Y1 - 2015 SN - 0340-5370 VL - 67 IS - 4 SP - 458 EP - 482 ER - TY - GEN A1 - Müller, David T1 - Grid extension in German backyards: a game-theory rationale T2 - Journal of Environmental Planning and Management Y1 - 2017 U6 - https://doi.org/10.1080/09640568.2016.1159952 SN - 1360-0559 VL - 60 IS - 3 SP - 437 EP - 461 ER - TY - GEN A1 - Müller, David T1 - … and justice for all – cost fairness in Volkswagen’s product family T2 - Journal of Applied Accounting Research Y1 - 2017 U6 - https://doi.org/10.1108/JAAR-09-2015-0078 SN - 0967-5426 VL - 18 IS - 2 SP - 261 EP - 271 ER - TY - GEN A1 - Müller, David T1 - Fair allocation of cost reductions for a scale-based product family in a hierarchically structured firm T2 - International Journal of Product Development Y1 - 2017 U6 - https://doi.org/10.1504/IJPD.2017.10006084 SN - 1741-8178 SN - 1477-9056 VL - 22 IS - 1 SP - 1 EP - 20 ER - TY - CHAP A1 - Müller, David ED - Müller, David T1 - Faire Kostenaufteilung von Kooperationen in der Forst- und Landwirtschaft T2 - Controlling für kleine und mittlere Unternehmen Y1 - 2017 SN - 978-3-11-051487-2 SP - 260 EP - 285 PB - De Gruyter-Oldenbourg CY - München ET - 2. Auflage ER - TY - CHAP A1 - Müller, David ED - Müller, David T1 - Analyse der Improvisation als Problemlösungsalternative in KMU T2 - Controlling für kleine und mittlere Unternehmen Y1 - 2017 SN - 978-3-11-051487-2 U6 - https://doi.org/10.1515/9783110517163-016 SP - 393 EP - 427 PB - De Gruyter-Oldenbourg CY - München ET - 2. Auflage ER - TY - CHAP A1 - Müller, David ED - Müller, David ED - Trost, Ralf T1 - The Usability and Suitability of Allocation Schemes for Corporate Cost Accounting T2 - Game Theory in Management Accounting Y1 - 2018 SN - 978-3-319-61602-5 U6 - https://doi.org/10.1007/978-3-319-61603-2_19 SP - 401 EP - 427 PB - Springer CY - Cham [u.a.] ER - TY - BOOK A1 - Müller, David T1 - Investitionsrechnung und Investitionscontrolling N2 - Investitionen als eine wesentliche Grundlage unternehmerischer Tätigkeit sind durch komplexe Entscheidungsprozesse gekennzeichnet. Zentrale Aufgabe des Investitionscontrollings ist deshalb die Unterstützung der Planung, Realisierung und Umsetzung dieser Entscheidungen. Damit diese Aufgabe bestmöglich erfüllt werden kann, wurde die vorliegende Auflage neu strukturiert. Die Eigenschaften des Investitionsprozesses und des Investitionscontrollings werden in den ersten beiden Kapiteln vorgestellt. Im Anschluss daran werden die Grundlagen der Entscheidungstheorie dargelegt. Diese werden üblicherweise als Einzelentscheidungen betrachtet, jedoch sind Investitionsentscheidungen in den seltensten Fällen Individualentscheidungen. In der Regel sind mehrere Mitarbeiter und Abteilungen in die Entscheidungsprozesse eingebunden. Es liegt nahe, neben den Individualentscheidungen auch kollektive Entscheidungen zu berücksichtigen. Aus diesem Grund werden Theorie und Praxis kollektiver Entscheidungen in einem eigenständigen Kapitel beleuchtet. Neben der Entscheidungstheorie bildet die Investitionstheorie das klassische Fundament zur Unterstützung von Investitionsentscheidungen. Die grundlegenden Verfahren für Situationen unter Sicherheit werden ebenso vorgestellt wie die Verfahren für Entscheidungen unter Unsicherheit. Eine ganze Reihe von Investitionen wird nicht durch einen einzelnen Akteur (z.B. Unternehmen, Kostenstelle, Gemeinde) sondern als Gemeinschaftsinvestitionen durch mehrere Akteure realisiert. Die kooperative Spieltheorie ist in der Lage, für eine gerechte Nutzenaufteilung zu sorgen. Deshalb ist diesem Bereich ein umfangreiches Kapitel mit vielen Anwendungsbeispielen gewidmet. KW - Controlling KW - Entscheidungs- und Spieltheorie KW - Gemeinschaftsinvestitionen KW - Investitionscontrolling KW - Investitionsrechnung KW - Wertorientierte Unternehmensführung KW - Individuelle Entscheidungen KW - Kollektive Entscheidungen KW - Kooperative Spieltheorie KW - Investitionsrechenverfahren KW - Investitionsrechenverfahren unter Sicherheit KW - Investitionsrechenverfahren und Unsicherheit Y1 - 2019 SN - 978-3-662-57608-3 SN - 978-3-662-57609-0 U6 - https://doi.org/10.1007/978-3-662-57609-0 PB - Springer CY - Berlin [u.a.] ET - 2. Auflage ER - TY - GEN A1 - Dornisch, Wolfgang A1 - Schrade, David A1 - Xu, Bai-Xiang A1 - Keip, Marc-André A1 - Müller, Ralf T1 - Coupled phase field simulations of ferroelectric and ferromagnetic layers in multiferroic heterostructures T2 - Archive of Applied Mechanics N2 - The combination of materials with either pronounced ferroelectric or ferromagnetic effect characterizes multiferroic heterostructures, whereby the different materials can be arranged in layers, columns or inclusions. The magnetization can be controlled by the application of electrical fields through a purely mechanical coupling at the interfaces between the different materials. Thus, a magneto-electric coupling effect is obtained. Within a continuum mechanics formulation, a phase field is used to describe the polarization and the magnetization in the ferroelectric and ferromagnetic layers, respectively. The coupling between polarization/magnetization and strains within the layers, in combination with the mechanical coupling at the sharp layer interfaces, yields the magneto-electric coupling within the heterostructure. The continuum formulations for both layers are discretized in order to make the differential equations amenable to a numerical solution with the finite element method. A state-of-the-art approach is used for the ferroelectric layer. The material behavior of the ferromagnetic layer is described by a continuum formulation from the literature, which is discretized using a newly proposed approach for the consistent interpolation of the magnetization vector. Four numerical examples are presented which show the applicability of the newly proposed approach for the ferromagnetic layer as well as the possibility to simulate magneto-electric coupling in multiferroic heterostructures. KW - Multiferroic heterostructure KW - Phase field method KW - Ferroelectric material KW - Ferromagnetic material KW - Finite element method KW - Rotation interpolation Y1 - 2019 U6 - https://doi.org/10.1007/s00419-018-1480-9 SN - 0939-1533 SN - 1432-0681 VL - 89 IS - 6 SP - 1031 EP - 1056 ER - TY - GEN A1 - Dornisch, Wolfgang A1 - Schrade, David A1 - Xu, Bai-Xiang A1 - Müller, Ralf T1 - Coupling of phase field models for ferroelectric and ferromagnetic layers in multiferroic heterostructures T2 - VII International Conference on Coupled Problems in Science and Engineering (Coupled Problems 2017) N2 - Heterostructures of ferroelectric and ferromagnetic layers are commonly used to obtain electromagnetic effects. The elastic coupling between the layers is widely acknowledged as the main mechanism responsible for the electro-magneto interaction. Within this contribution we study the coupling of ferroelectric and ferromagnetic layers with well-defined interfaces. The intention is to simulate the switching of the magnetization with the help of electric fields, which has been studied experimentally in [1]. Each layer is simulated by using mechanically coupled phase field modeling, whereby the approaches presented in [2] and [3] will be used. The strains in each layer depend on the direction of the polarization/magnetization. A mismatch of these strains will be compensated by local deformations at the interface as the coupling results from the coherent deformation at the interface. This leads to the possibility to alter the magnetization direction by changing the electric polarization and vice verse. Numerical simulations will illustrate the evolution of the ferroic microstructures with a focus on the strain coupling and the resulting interactions between layers. Y1 - 2017 UR - http://congress.cimne.com/coupled2017/admin/files/fileabstract/a365.pdf PB - CIMNE CY - Barcelona ER - TY - GEN A1 - Dornisch, Wolfgang A1 - Schrade, David A1 - Wolf, Jana A1 - Müller, Ralf T1 - Numerical methods for the modeling of the magnetization vector in multiferroic heterostructures T2 - Proceedings in Applied Mathematics and Mechanics, Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar 2017) N2 - Multiferroic heterostructures are commonly used to obtain electro‐magnetic coupling effects. Thereby, the ferroelectric layer is used to control the magnetization in the ferromagnetic layer. The coupling between the layers is obtained by the mechanical coupling between the layers, which have well‐defined interfaces. Within this contribution we use phase field models to define the polarization and magnetization in the ferroelectric and ferromagnetic layers, respectively. A coupling between polarization/magnetization and strains in each layer in combination with coherent deformations at the interface yields an electromagnetic coupling within the entire heterostructure. Numerical formulations for the interpolation of the polarization vector are well‐defined in the literature. However, the establishment of a consistent numerical formulation for the ferromagnetic layer, where the length of the magnetization vector has to be constant, remains a difficult task. We propose a new numerical approach for the consistent treatment of the ferromagnetic layer and provide numerical simulations which illustrate the electromagnetic coupling effect. Y1 - 2017 U6 - https://doi.org/10.1002/pamm.201710221 SN - 1617-7061 VL - 17 IS - 1 SP - 503 EP - 504 PB - WILEY-VCH Verlag GmbH & Co. KGaA CY - Weinheim ER -