TY - GEN A1 - Schob, Daniela A1 - Roszak, Robert A1 - Sagradov, Ilja A1 - Sparr, Holger A1 - Kupsch, Andreas A1 - Leonard, Fabien A1 - Müller, Bernd R. A1 - Bruno, Giovanni T1 - Experimental and numerical simulation of material and damage behaviour of 3d printed polyamide 12 under quasi-static-loading T2 - Archives of Mechanics N2 - In order to characterise the material and damage behaviour of additively manufactured polyamide 12 (PA12) under quasi-static load and to implement it in a numerical model, experiments under quasi-static load as well as microstructural investigations were carried out. Selective laser sintering (SLS) was used as the manufacturing process. For the classification of the material behaviour, quasi-static cyclic tests with holding times as well as tensile tests were performed. X-ray refraction and computed tomography (CT) were used to investigate the damage behaviour. The Chaboche model, which has already been applied for metallic materials under thermomechanical loading, served as the basis for the selection of the numerical material model. The same procedure was used for the selection of the damage model, where the Gurson–Tvergaard–Needleman (GTN) model was chosen, which was already used for porous metallic materials. The Chaboche model shows very good agreement with experimental results. Furthermore, the coupling with the GTN model allows a very good modelling of the damage behaviour. Finally, it could be shown that the selected models are suitable to simulate the material and damage behaviour of 3D printed PA12. KW - Polyamide 12 KW - 3D printing KW - Viscoplastic KW - Chaboche model KW - Damage KW - GTN model KW - X-ray refraction KW - Computed tomography Y1 - 2019 UR - https://am.ippt.pan.pl/am/article/viewFile/v71p507/pdf U6 - https://doi.org/10.24423/aom.3162 SN - 0373-2029 VL - 71 IS - 4-5 SP - 507 EP - 526 ER - TY - GEN A1 - Hauschildt, Katja A1 - Stark, Andreas A1 - Schell, Norbert A1 - Müller, Martin A1 - Pyczak, Florian T1 - The transient liquid phase bonding process of a γ-TiAl alloy with brazing solders containing Fe or Ni T2 - Intermetallics Y1 - 2019 SN - 0966-9795 VL - 106 SP - 48 EP - 58 ER - TY - GEN A1 - Boch, Steffen A1 - Allan, Eric A1 - Birkhofer, Klaus A1 - Bossdorf, Oliver A1 - Blüthgen, Nico A1 - Christ-Breulmann, Sabina A1 - Diekötter, Tim A1 - Dormann, Carsten F. A1 - Gossner, Martin M. A1 - Hallmann, Christine A1 - Hemp, Andreas A1 - Hölzel, Norbert A1 - Jung, Kirsten A1 - Klaus, Valentin H. A1 - Klein, Alexandra M. A1 - Kleinebecker, Till A1 - Lange, Markus A1 - Müller, Jörg A1 - Nacke, Heiko A1 - Prati, Daniel A1 - Renner, Swen C. A1 - Rothenwöhrer, Christoph A1 - Schall, Peter A1 - Schulze, Ernst-Detlef A1 - Socher, Stephanie A. A1 - Tscharntke, Teja A1 - Türke, Manfred A1 - Weiner, Christiane N. A1 - Weisser, Wolfgang W. A1 - Westphal, Catrin A1 - Wolters, Volkmar A1 - Wubet, Tesfaye A1 - Fischer, Markus T1 - Extensive und jährlich wechselnde Nutzungsintensität fördert den Artenreichtum im Grünland T2 - ANLIEGEN NATUR Y1 - 2016 UR - https://www.biom.uni-freiburg.de/mitarbeiter/dormann/boch2016anliegennatur.pdf SN - 1864-0729 VL - 38 IS - 1 SP - 86 EP - 95 ER - TY - GEN A1 - Chabrillat, Sabine A1 - Kaufmann, H. A1 - Merz, Bruno A1 - Müller, Andreas A1 - Bens, Oliver A1 - Lemmnitz, Christine T1 - Development of relationships between reflectance and erosion modelling: Test site preliminary field spectral analysis N2 - Verlagsort: Herrsching Y1 - 2003 ER -