TY - CHAP A1 - Lindemann, Janny A1 - Roth-Fagaraseanu, Dan A1 - Wagner, Lothar T1 - Effect of Shot Peening on Fatigue Performance of Gamma Titanium Aluminides T2 - Shot peening, proceedings of the 8th International Conference on Shot Peening (ICSP-8) in Garmisch-Partenkirchen, Germany, 16 - 20 September 2002 Y1 - 2003 SN - 3-527-30537-8 SP - 392 EP - 398 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Lindemann, Janny A1 - Grossmann, Kim A1 - Raczek, Thomas A1 - Wagner, Lothar T1 - Influence of Shot Peening and Deep Rolling on High Temperature Fatigue of the Ni-Superalloy Udimet 720 LI T2 - Shot peening, proceedings of the 8th International Conference on Shot Peening (ICSP-8) in Garmisch-Partenkirchen, Germany, 16 - 20 September 2002 Y1 - 2003 SN - 3-527-30537-8 SP - 454 EP - 460 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Lindemann, Janny A1 - Roth-Fagaraseanu, Dan A1 - Wagner, Lothar ED - Kim, Nack J. ED - Lee, C. S. ED - Eylon, D. T1 - Surface Strengthening for Optimizing Fatigue Performance of Gamma Titanium Aluminides at Ambient and Elevated Temperatures, Light Materials for Transportation Systems T2 - Proceedings of the Second International Conference on Light Materials for Transportation Systems (LiMAT-2001) held at Pusan, Korea, May 6 - 10, 2001, Vol. 2 Y1 - 2001 PB - Center for Advanced Aerospace Materials CY - Pohang ER - TY - GEN A1 - Düring, Michael A1 - Karabet, Andrey A1 - Viehweger, Bernd A1 - Lindemann, Janny A1 - Zhang, Ping T1 - Magnesium-Knetlegierungen : Innovative Leichtbauwerkstoffe für den Automobilbau T2 - Forum der Forschung N2 - Wenngleich der Verwendung von Mg-Knetlegierungen im Automobilbau ein großes Potenzial zugesprochen wird, ist deren Einsatz bislang von geringer Bedeutung geblieben. Im Rahmen des vom BMBF-geförderten Verbundforschungsvorhabens "MIA-Magnesium im Automobilbau" wurden daher in Zusammenarbeit der Firmen DaimlerChrysler AG, ThyssenKrupp Umformtechnik GmbH, Otto Fuchs Metallwerke KG, Honsel GmbH & Co. KG, GP Innovation GmbH, OSK Kiefer GmbH sowie der BTU Cottbus die Grundlagen für die prototypische Fertigung von Bauteilen aus den Mg-Knetlegierungen des Typs AZ31 und AZ 80 erarbeitet. KW - Magnesium-Knetlegierungen Y1 - 2006 SN - 0947-6989 VL - 10 IS - 19 SP - 41 EP - 46 ER - TY - GEN A1 - Zhang, Ping A1 - Ding, W. J. A1 - Lindemann, Janny A1 - Leyens, Christoph T1 - Mechanical properties of the hot-rolled Mg-12Gd-3Y magnesium alloy N2 - Tensile and high cycle fatigue (HCF) properties of the hot-rolled Mg-12Gd-3Y (wt.%) magnesium alloyhave been investigated. The magnesium alloy exhibits a fatigue strength of about 150 MPa, which ismuch higher than that of the commercial Mg-8Al-Zn alloy AZ80. Aging heat-treatment (T5) improvedthe fatigue life of the Mg-12Gd-3Y alloy. Fatigue cracks nucleated at the intense slip bands in theas-rolled alloy. After T5 treatment, however, the fatigue crack nucleation site shifted to the phase boundariesbetween MgGdY particles and Mg matrix. T5 heat-treatment retarded the crack initiation and thusimproved the fatigue life of the Mg-12Gd-3Y alloy. KW - Mechanical properties KW - Tensile KW - Fatigue KW - Magnesium alloys KW - Aging heat treatment Y1 - 2009 ER - TY - CHAP A1 - Lindemann, Janny A1 - Glavatskikh, Maria A1 - Leyens, Christoph A1 - Roth-Fagaraseanu, Dan ED - Kim, Young-Won T1 - Effect of Small Boron and Carbon Additions on the Mechanical Properties of a Novel High Niobium-Containing Gamma Titanium Aluminide Alloy T2 - Structural aluminides for elevated temperatures, proceedings of the Structural Aluminides for Elevated Temperatures Symposium, held during TMS 2008 annual meeting & exhibition, New Orleans, Louisiana, USA, March 9 - 13, 2008 KW - Gamma titanium aluminides KW - Mechanical properties KW - Fatigue KW - Creep Y1 - 2008 SN - 978-0-87339-720-9 SP - 257 EP - 264 PB - TMS CY - Warrendale, Pa. ER - TY - CHAP A1 - Glavatskikh, Maria A1 - Lindemann, Janny A1 - Leyens, Christoph A1 - Oehring, Michael A1 - Appel, Fritz ED - Kim, Young-Won T1 - Surface Strengthening for Enhanced Fatigue Performance of Gamma Titanium Aluminides T2 - Structural aluminides for elevated temperatures, proceedings of the Structural Aluminides for Elevated Temperatures Symposium, held during TMS 2008 annual meeting & exhibition, New Orleans, Louisiana, USA, March 9 - 13, 2008 KW - Gamma titanium aluminides KW - Shot peening KW - Roller burnishing KW - High cycle fatigue Y1 - 2008 SN - 978-0-87339-720-9 SP - 111 EP - 118 PB - TMS CY - Warrendale, Pa. ER - TY - JOUR A1 - Zhang, Ping A1 - Lindemann, Janny A1 - Leyens, Christoph T1 - Influence of texture and microstructure on mechanical properties of high-strength wrought magnesium alloy AZ80 Y1 - 2006 ER - TY - CHAP A1 - Zhang, Ping A1 - Lindemann, Janny A1 - Leyens, Christoph T1 - Surface rolling on the high-strength wrought magnesium alloy AZ80 Y1 - 2007 ER - TY - JOUR A1 - Zhang, Pang A1 - Lindemann, Janny T1 - Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80 Y1 - 2005 ER - TY - JOUR A1 - Zhang, Ping A1 - Lindemann, Janny T1 - Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ80 Y1 - 2005 ER -