TY - GEN A1 - Krzywiński, Kamil A1 - Sadowski, Łukasz A1 - Stefaniuk, Damian A1 - Obrosov, Aleksei A1 - Weiß, Sabine T1 - Engineering and Manufacturing Technology of Green Epoxy Resin Coatings Modified with Recycled Fine Aggregates T2 - International Journal of Precision Engineering and Manufacturing-Green Technology N2 - Nowadays, the recycled fine aggregate sourced from construction and demolition waste is not frequently used in manufacturing of epoxy resin coatings. Therefore, the main novelty of the article is to prepare green epoxy resin coatings modified with recycled fine aggregate in a replacement ratio of natural fine aggregate ranged from 20 to 100%. The microstructural properties of the aggregates and epoxy resin were analyzed using micro-computed tomography, scanning electron microscopy and nanoindentation. The macroscopic mechanical properties were examined using pull-off strength tests. The highest improvement of the mechanical properties was observed for epoxy resin coatings modified with 20% of natural fine aggregate and 80% of recycled fine aggregate. It has been found that even 100% of natural fine aggregate can be successfully replaced using the recycled fine aggregate with consequent improvement of the pull-off strength of analyzed epoxy resin coatings. In order to confirm the assumptions resulting from the conducted research, an original analytical and numerical failure model proved the superior behavior of modified coating was developed. KW - Manufacturing KW - Wear KW - Composite KW - Epoxy resin coating KW - Recycled aggregate KW - Green material Y1 - 2022 UR - https://link.springer.com/article/10.1007/s40684-021-00377-w U6 - https://doi.org/10.1007/s40684-021-00377-w SN - 2198-0810 VL - 9 IS - 1 SP - 253 EP - 271 ER -