TY - CHAP A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian T1 - Kinetic study of methanol and ethanol oxidation in presence of NOx T2 - Workshop on Gas-phase reaction kinetics of biofuels oxygenated molecules KW - Gas-phase Reaction Y1 - 2018 UR - https://www.researchgate.net/publication/324731559 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Detailed Kinetic Mechanism for the Oxidation of Ammonia Including the Formation and Reduction of Nitrogen Oxides T2 - Energy & Fuels N2 - This work introduces a newly developed reaction mechanism for the oxidation of ammonia in freely propagating and burner-stabilized premixed flames as well as shock-tube, jet-stirred reactor, and plug-flow reactor experiments. The paper mainly focuses on pure ammonia and ammonia–hydrogen fuel blends. The reaction mechanism also considers the formation of nitrogen oxides as well as the reduction of nitrogen oxides depending upon the conditions of the surrounding gas phase. Doping of the fuel blend with NO2 can result in acceleration of H2 autoignition via the reaction NO2 + HO2 ⇋ HONO + O2, followed by the thermal decomposition of HONO, or deceleration of H2 oxidation via NO2 + OH ⇋ NO + HO2. The concentration of HO2 is decisive for the active reaction pathway. The formation of NO in burner-stabilized premixed flames is shown to demonstrate the capability of the mechanism to be integrated … KW - Energy & Fuels Y1 - 2018 U6 - https://doi.org/10.1021/acs.energyfuels.8b01056 SN - 1520-5029 SN - 0887-0624 VL - 32 IS - 10 SP - 10202 EP - 10217 ER - TY - CHAP A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Zeuch, Thomas ED - Bockhorn, Henning ED - Scala, F. ED - Commodo, M. ED - Tregrossi, A. T1 - Development of a kinetic mechanism for NOx fuel interaction T2 - Proceedings, Joint Meeting of the German and Italian Sections of the Combustion Institute, 41st Meeting on Combustion, Sorrento, May 2018 N2 - This work introduces a newly developed reaction mechanism to predict fuel/NOx interaction in freely propagating, burner stabilized premixed flames, shock tubes, jet stirred reactors and plug flow reactors experiments. The study focuses on pure ammonia as fuel as well as H₂,H₂/CO, CH₄ doped with NO, NO₂ and N₂O. The kinetic scheme also focuses on the formation and consumption of nitrogen oxides at different experimental conditions. It is found that the doping with N₂O has almost no sensitivity on the H₂ chemistry, while small amount of NO₂ is enough to change the pressure dependence of H₂ auto ignition. The experiments with N₂O still show the significant influence of the chain breaking reaction H+O₂(+M)⇋HO₂(+M) on the H₂ ignition delay times, resulting in the crossing lines for the ignition delay times, which are moved at higher pressure to higher temperature. The concentration of HO₂ is decisive for the active reaction pathway in shock tube oxidation as well as in jet stirred and flow reactor. Reaction NO+HO₂⇋NO₂+OH and NO₂+H⇋NO+OH are very important because they strongly influence the inter conversion process of NO and NO₂ in jet stirred reactor and flow reactor for cases studied herein. The formation of NO in burner stabilized premixed flames is shown to demonstrate the capability of the mechanism to be integrated into mechanisms for hydrocarbon oxidation. KW - Development of a Kinetic Y1 - 2018 UR - http://www.combustion-institute.it/proceedings/XXXXI-ASICI/proceedings2018.pdf SN - 978-88-88104-22-5 PB - Associazione Sezione Italiana del Combustion Institute CY - Napoli ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Kinetic Modeling of NOx Formation and Consumption during Methanol and Ethanol Oxidation T2 - Combustion Science and Technology KW - Kinetic Modeling of NOx Formation Y1 - 2019 U6 - https://doi.org/10.1080/00102202.2019.1606804 SN - 1563-521X VL - 191 IS - 9 SP - 1628 EP - 1660 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Vin, Nicolas A1 - Herbinet, Olivier A1 - Seidel, Lars A1 - Battin-Leclerc, Frédérique A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Insights into nitromethane combustion from detailed kinetic modeling – Pyrolysis experiments in jet-stirred and flow reactors T2 - Fuel N2 - The pyrolysis of nitromethane highly diluted in helium was studied in a plug flow reactor and in a jet-stirred reactor at 1.07 bar and over the temperature range from 500 to 1100 K. Mole fraction profiles of major products and of intermediates were identified with gas chromatography and Fourier transform infrared spectroscopy. Using these experimental data, as well as published ones, we have developed a newly compiled model for the prediction of the pyrolysis and of the oxidation of nitromethane in jet-stirred and flow reactors, freely propagating, and burner-stabilized premixed flames, as well as in shock-tubes. The experimental results from the present work and from the literature are interpreted with the help of the kinetic model derived here. This study mainly focuses on the analysis of speciation in different reactors. Among the nitrogenous species, NO is found to be a major product for pyrolysis and oxidation. The model suggests that for nitromethane pyrolysis and oxidation the thermal dissociation channel to CH3 and NO2 is the main reaction path for the nitromethane degradation followed by the H-atom abstraction channel. The most sensitive reactions for nitromethane pyrolysis in a flow reactor and during pyrolysis and oxidation in a jet-stirred reactor are found to be CH3NO2(+M) ⇋ CH3 + NO2(+M) and CH3 + NO2 ⇋ CH3O + NO. The reaction CH3 + NO2 ⇋ CH3O + NO is found to be the most important reaction for all conditions studied. In a burner-stabilized premixed flame, as the mixture gets richer, the thermal dissociation channel CH3NO2(+M) ⇋ CH3 + NO2(+M) becomes more important as the contribution of the H-atom abstraction channel is decreased. Furthermore, in the burner-stabilized premixed flames, it was found that NO is mainly formed via NO2: NO2 + H ⇋ NO + OH, NO2 + CH3 ⇋ CH3O + NO. The model provided an overall reasonable agreement with the experimental data. However, for pyrolysis conditions, future work is desirable to improve predictions of intermediate species. This work extends the kinetic database and helps to improve the understanding of nitromethane chemistry. The kinetic model presented in this work can serve as a base model for hydrocarbons and oxygenated fuels higher than C2 and nitrogen-containing compounds higher than C1 as well as for pure nitrogen compounds. Y1 - 2020 UR - https://www.sciencedirect.com/science/article/pii/S001623611931703X#! U6 - https://doi.org/https://doi.org/10.1016/j.fuel.2019.116349 SN - 0016-2361 VL - 261 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Modeling for Nitromethane oxidation T2 - 1st International Conference on Smart Energy Carriers Napoli, 2019 N2 - The diminishing availability of conventional fuels and stricter regulations on pollution control and CO2 emission targets have led scientist and engineers to look for alternative fuels. Recently nitromethane has slowly gained interest as alternative fuel over conventional fuel for internal combustion engines. In the past, it was mostly used as rocket propellant or as an explosives [1,2]. Nitromethane is an energetic compound with a wide variety of applications, including its use as a monopropellant, a liquid explosive, a solvent for chemical processing and analysis, and a highperformance fuel additive for internal combustion engines and pulsed detonation engines [3]. The chemical formula of nitromethane is CH3NO2. As the name suggests, the molecule is essentially methane with one of the four hydrogens replaced by a nitro group. In essence, it is the simplest of possible energetic CHON molecules that contain nitro groups, which is why it is often used in reaction studies as a prototype for more complex energetic materials. There is no reliable kinetic model for nitromethane combustion, which is validated over a wide range of experimental conditions. There are a few published studies [4–8] both numerically and experimentally focusing often on a single reactor at very specific conditions. The aim of the present work is to extend our recently published mechanism [9] for syngas, methane and ammonia oxidation to include CH3NO2 as fuel and validate against the available experimental data from the literature. The development and compilation strategy for our mechanism is described in our recent work [9] and this study is conducted in a similar manner. Rates are taken mainly from [7,10–16]. This makes the kinetic model more robust and reliable for combustion modelling. Y1 - 2019 UR - http://logesoft.com/loge-16/wp-content/uploads/2019/01/Abstract_1stICSEC_SMARTCATs_Napoli_Shrestha-et-al_2018-11-28.pdf ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Zeuch, Thomas T1 - Kinetic Modeling for NOx prediction with improved base Chemistry T2 - COST 1404, SMARTCATs, Chemistry of smart energy carriers and technologies, 3rd General Meeting and Workshop on SECs in Industry of SMARTCATs Action KW - COST 1404, SMARTCATs, Chemistry of smart energy carriers and technologies, 3rd General Meeting and Workshop on SECs in Industry of SMARTCATs Action Y1 - 2017 UR - http://www.smartcats.eu/wp-content/uploads/2017/10/AM3_02_01.pdf ER - TY - GEN A1 - León, Larisa A1 - Ruwe, Lena A1 - Moshammer, Kai A1 - Seidel, Lars A1 - Shrestha, Krishna Prasad A1 - Wang, Xiaoxiao A1 - Mauß, Fabian A1 - Kohse-Höinghaus, Katharina A1 - Hansen, Nils T1 - Chemical insights into the larger sooting tendency of 2-methyl-2-butene compared to n-pentane T2 - Combustion and Flame N2 - A comprehensive, chemically detailed mechanism for the combustion of 2-methyl-2-butene and n-pentane is presented to provide insights into the different sooting tendencies of these two structurally different C5 hydrocarbons. A hierarchically assembled mechanism has been developed to specifically target speciation data from low-pressure premixed flames of 2-methyl-2-butene [Ruwe et al., Combust. Flame, 175, 34-46, 2017] and newly measured mole fraction data for a fuel-rich (ɸ=1.8) n-pentane flame, in which species profiles up to phenol were quantified. The partially isomer-resolved chemical composition of this flame was determined using flame-sampling molecular-beam mass spectrometry with single-photon ionization by tunable, synchrotron-generated vacuum-ultraviolet radiation. The presented model, which includes a newly determined, consistent set of the thermochemistry data for the C5 species, presents overall satisfactory capabilities to predict the mole fraction profiles of common combustion intermediates. The analysis of the model predictions revealed the fuel-structure dependencies (i.e. saturated vs. unsaturated and linear vs. branched) of the formation of small aromatic species that are considered as soot precursors. The propensity of the 2-methyl-2-butene flame to form larger concentrations of aromatic species was traced back to the readily available formation routes of several small precursor molecules and the efficient formation of “first aromatic rings” beyond benzene. KW - 2-Methyl-2-butene KW - n-Pentane KW - Laminar premixed flames KW - Molecular-beam mass spectrometry KW - Kinetic modeling KW - PAH formation Y1 - 2019 UR - https://www.sciencedirect.com/science/article/abs/pii/S0010218019302883#! U6 - https://doi.org/10.1016/j.combustflame.2019.06.029 SN - 0010-2180 VL - 208 SP - 182 EP - 197 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Eckart, Sven A1 - Elbaz, Ayman M. A1 - Giri, Binod Raj A1 - Fritsche, Chris A1 - Seidel, Lars A1 - Roberts, William L. A1 - Krause, Hartmut A1 - Mauß, Fabian T1 - A comprehensive kinetic model for dimethyl ether and dimethoxymethane oxidation and NOx interaction utilizing experimental laminar flame speed measurements at elevated pressure and temperature T2 - Combustion and Flame N2 - Laminar flame speeds of dimethyl ether and dimethoxymethane at pressures from 1 to 5 bar and initial temperatures from 298 to 373 K were determined experimentally using a constant volume spherical vessel and a heat flux burner setup. This study is the first to report dimethoxymethane laminar flame speeds at a pressure higher than 1 bar. Using these experimental data along with data available in the literature, a new kinetic model for the prediction of the oxidation behavior of dimethyl ether and dimethoxymethane in freely propagating and burner stabilized premixed flames, in shock tubes, rapid compression machines, flow reactors, and a jet-stirred reactor has been developed. The experimental results from the present work and literature are interpreted with the help of the derived kinetic model. This newly developed reaction mechanism considers the redox chemistry of NOx to accommodate the influence of the oxygen level on the onset of fuel conversion and interconversion of NO and NO2. The current model suggests that an increased O2 level promotes the HO2 production, which in turn leads to the formation of OH radicals, which promotes the combustion of the fuel/air mixture under lean conditions. The increase of OH radical concentrations is mainly via the NO/NO2 interconversion reaction channel, NO+HO2=NO2+OH, NO2+H=NO+OH, CH3OCH3+NO2=CH3OCH2+HONO, followed by the thermal decomposition of HONO. This work extends the kinetic database and helps to improve the understanding of dimethyl ether and dimethoxymethane combustion behavior. The kinetic model presented in this work can serve as a base model for hydrocarbons and oxygenated fuels higher than C2. KW - Dimethyl ether KW - Dimethoxymethane KW - Laminar flame speed KW - Kinetic modeling KW - NOx Y1 - 2020 U6 - https://doi.org/10.1016/j.combustflame.2020.04.016 SN - 1556-2921 VL - 218 SP - 57 EP - 74 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Lhuillier, Charles A1 - Barbosa, Amanda Alves A1 - Brequigny, Pierre A1 - Contino, Francesco A1 - Mounaïm-Rousselle, Christine A1 - Seidel, Lars A1 - Mauß, Fabian T1 - An experimental and modeling study of ammonia with enriched oxygen content and ammonia/hydrogen laminar flame speed at elevated pressure and temperature T2 - Proceedings of the Combustion Institute N2 - Laminar flame speeds of ammonia with oxygen-enriched air (oxygen content varying from 21 to 30 vol.%) and ammonia-hydrogen-air mixtures (fuel hydrogen content varying from 0 to 30 vol.%) at elevated pressure (1–10 bar) and temperature (298–473 K) were determined experimentally using a constant volume combustion chamber. Moreover, ammonia laminar flame speeds with helium as an inert were measured for the first time. Using these experimental data along with published ones, we have developed a newly compiled kinetic model for the prediction of the oxidation of ammonia and ammonia-hydrogen blends in freely propagating and burner stabilized premixed flames, as well as in shock tubes, rapid compression machines and a jet-stirred reactor. The reaction mechanism also considers the formation of nitrogen oxides, as well as the reduction of nitrogen oxides depending on the conditions of the surrounding gas phase. The experimental results from the present work and the literature are interpreted with the help of the kinetic model derived here. The experiments show that increasing the initial temperature, fuel hydrogen content, or oxidizer oxygen content causes the laminar flame speed to increase, while it decreases when increasing the initial pressure. The proposed kinetic model predicts the same trends than experiments and a good agreement is found with measurements for a wide range of conditions. The model suggests that under rich conditions the N2H2 formation path is favored compared to stoichiometric condition. The most important reactions under rich conditions are: NH2+NH=N2H2+H, NH2+NH2=N2H2+H2, N2H2+H=NNH+H2 and N2H2+M=NNH+H+M. These reactions were also found to be among the most sensitive reactions for predicting the laminar flame speed for all the cases investigated. KW - Ammonia KW - Laminar flame speed KW - Kinetic modeling KW - Ammonia-hydrogen KW - NOx Y1 - 2020 UR - https://www.sciencedirect.com/science/article/pii/S1540748920302881#! U6 - https://doi.org/10.1016/j.proci.2020.06.197 SN - 1540-7489 VL - 2020 SP - 1 EP - 12 ER - TY - GEN A1 - Issayev, Gani A1 - Giri, Binod Raj A1 - Elbaz, Ayman M. A1 - Shrestha, Krishna Prasad A1 - Mauß, Fabian A1 - Roberts, William L. A1 - Farooq, Aamir T1 - Combustion behavior of ammonia blended with diethyl ether T2 - Proceedings of the Combustion Institute N2 - Ammonia (NH3) is recognized as a carbon-free hydrogen-carrier fuel with a high content of hydrogen atoms per unit volume. Recently, ammonia has received increasing attention as a promising alternative fuel for internal combustion engine and gas turbine applications. However, the viability of ammonia fueling future combustion devices has several barriers to overcome. To overcome the challenge of its low reactivity, it is proposed to blend it with a high-reactivity fuel. In this work, we have investigated the combustion characteristics of ammonia/diethyl ether (NH3/DEE) blends using a rapid compression machine (RCM) and a constant volume spherical reactor (CVSR). Ignition delay times (IDTs) of NH3/DEE blends were measured using the RCM over a temperature range of 620 to 942 K, pressures near 20 and 40 bar, equivalence ratios (Φ) of 1 and 0.5, and a range of mole fractions of DEE, χDEE, from 0.05 to 0.2 (DEE/NH3 = 5 – 20%). Laminar burning velocities of NH3/DEE premixed flames were measured using the CVSR at 298 K, 1 bar, Φ of 0.9 to 1.3, and χDEE from 0.1 to 0.4. Our results indicate that DEE promotes the reactivity of fuel blends resulting in significant shortening of the ignition delay times of ammonia under RCM conditions. IDTs expectedly exhibited strong dependence on pressure and equivalence ratio for a given blend. Laminar burning velocity was found to increase with increasing fraction of DEE. The burnt gas Markstein length increased with equivalence ratio for χDEE = 0.1 as seen in NH3-air flames, while the opposite evolution of Markstein length was observed with Φ for 0.1 < χDEE ≤ 0.4, as observed in isooctane-air flames. A detailed chemical kinetics model was assembled to analyze and understand the combustion characteristics of NH3/DEE blends. KW - Ammonia KW - Diethyl ether KW - Ignition delay times KW - Laminar flame speed Y1 - 2020 U6 - https://doi.org/10.1016/j.proci.2020.06.337 SN - 1540-7489 VL - 38 (2021) IS - 1 SP - 499 EP - 506 ER - TY - GEN A1 - Elbaz, Ayman M. A1 - Giri, Binod Raj A1 - Issayev, Gani A1 - Shrestha, Krishna Prasad A1 - Mauß, Fabian A1 - Farooq, Aamir A1 - Roberts, William L. T1 - Experimental and Kinetic Modeling Study of Laminar Flame Speed of Dimethoxymethane and Ammonia Blends T2 - Energy & Fuels N2 - Ammonia (NH3) is considered a promising carbon-neutral fuel, with a high hydrogen content, that can diversify the global energy system. Blending ammonia with a highly reactive fuel is one possible strategy to enhance its combustion characteristics. Here, an investigation of blends of NH3 and dimethoxymethane (DMM), a biofuel with high fuel-born oxygen content and no carbon–carbon bonds, is reported. Unstretched laminar burning velocity (SL) and Markstein length of different NH3/DMM blends were experimentally determined using spherically propagating premixed flames. The DMM mole fraction was varied from 0.2 to 0.6 while measuring SL at 298 K, 0.1 MPa, and equivalence ratios (Φ) over the range of 0.8–1.3. The addition of DMM was found to immensely enhance the combustion characteristics of ammonia. DMM 20% (by mole fraction) in the NH3/DMM blend increased SL by more than a factor of 3 over neat ammonia; such enhancement was found to be comparable to 60% CH4 in NH3 (Φ = 0.9–1.1) blends. Increasing Φ was found to significantly decrease the burned gas Markstein length for lean cases, whereas a negligible effect was observed for rich mixtures. A composite chemical kinetic model of DMM/NH3, aimed at interpreting the high-temperature combustion chemistry, was able to reliably predict SL for neat NH3 and DMM flames. Also, the predictive capability of the kinetic model to describe SL for DMM/NH3 blends is reasonably good. Sensitivity analysis and reaction path analysis indicated that the NH3/DMM blends could be understood as dual oxidation processes of the individual fuels that are competing for the same radical pool. KW - Ammonia KW - Dimethoxymethane KW - Laminar flame speed KW - Kinetic modeling Y1 - 2020 UR - https://pubs.acs.org/doi/abs/10.1021/acs.energyfuels.0c02269 U6 - https://doi.org/10.1021/acs.energyfuels.0c02269 SN - 1520-5029 VL - 34 IS - 11 SP - 14727 EP - 14740 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Moréac, Gladys A1 - Dagaut, Philippe A1 - Mauß, Fabian T1 - On the implications of nitromethane – NOx chemistry interactions for combustion processes T2 - Fuel N2 - In this work, we report a detailed investigation of the CH3NO2 chemistry effect on fuel-NO interactions for the fuels methane and n-heptane using a recently developed and extensively validated H2/O2/CO/NOx/NH3/CH3NO2 baseline chemistry. In general, the model predictions show good agreement with temperature profiles of major and intermediate species in jet-stirred reactor experiments and they capture the subtle effect of NO addition. For both fuels, the CH3NO2 kinetics retard the system reactivity in the low temperature range by delaying the production of key radicals like OH and HO2. This explains the retarding effect of NO for n-heptane low temperature ignition and the overprediction of reactivity enhancement by NO in earlier studies on methane combustion. For methane, the recently explored roaming mediated dissociation channel of CH3NO2 to CH3O + NO is a major reaction pathway for CH3NO2 consumption. Our analysis suggests that at higher pressure, relevant to engine conditions, the two key intermediate species HONO and CH3NO2 feature strongly increased concentrations during n-heptane combustion and they may be detectable under such conditions in combustion experiments of this fuel-NOx system. The results of this work call for detailed future investigations of the CH3NO2 chemistry effect in the context of exhaust gas recirculation, also with regard to the suppression of engine knock. KW - Nitromethane KW - NOx KW - Fuel-NOx KW - Kinetic modeling KW - EGR Y1 - 2021 UR - https://www.sciencedirect.com/science/article/pii/S001623612032857X#! U6 - https://doi.org/10.1016/j.fuel.2020.119861 SN - 0016-2361 VL - 289 ER - TY - GEN A1 - Franken, Tim A1 - Seidel, Lars A1 - Shrestha, Krishna Prasad A1 - Gonzalez Mestre, Laura Catalina A1 - Mauß, Fabian T1 - Multi-objective Optimization of Gasoline, Ethanol, and Methanol in Spark Ignition Engines N2 - In this study, an engine and fuel co-optimization is performed to improve the efficiency and emissions of a spark ignition engine utilizing detailed reaction mechanisms and stochastic combustion modelling. The reaction mechanism for gasoline surrogates (Seidel 2017), ethanol, and methanol (Shrestha et al. 2019) is validated for experiments at different thermodynamic conditions. Liquid thermophysical properties of the RON95E10 surrogate (iso-octane, n-heptane, toluene, and ethanol mixture), ethanol, and methanol are determined using the NIST standard reference database (NIST 2018) and Yaws database (Yaws 2014). The combustion chemistry, laminar flame speed, and thermophysical data are pre-compiled in look-up tables to speed up the simulations (tabulated chemistry). The auto-ignition in the stochastic reactor model is predicted by the detailed chemistry and subsequently evaluated using the Bradley Detonation Diagram (Bradley et al. 2002, Gu et al. 2003, Neter 2019), which assigns two dimensionless parameters (resonance parameter and reactivity parameter). According to the defined developing detonation limits, the auto-ignition is either in deflagration, sub-sonic auto-ignition, or developing detonation mode. Ethanol and methanol show a knock-reducing characteristic, which is mainly due to the high heat of vaporization. The multi-objective optimization process includes mathematical algorithms for design space exploration with Uniform Latin Hypercube, pareto front convergence with Non-dominated Sorting Genetic Algorithm II (NSGA-II), and multi-criteria decision making (Deb et al. 2002). The optimization input parameter ranges are selected according to the previous sensitivity analysis, and the objectives are to minimize specific CO2 and specific CO and maximize indicated efficiency. The performance study of different optimization algorithms shows that the incorporation of metamodels is beneficial to improve the design space exploration, while keeping the optimization duration low. The comparison of different reaction mechanisms, which are applied in the optimization process, shows a strong impact on the pareto front solutions. This is due to differences in the emission formation and auto-ignition between the different reaction schemes. Overall, the engine efficiency is increased by 3.5 % points, and specific CO2 emissions are reduced by 99 g/kWh for ethanol and 142 g/kWh for methanol combustion compared to the base case. This is achieved by advanced spark timing, lean combustion, and reduced C:H ratio of ethanol and methanol in relation to RON95E10. KW - Optimization KW - Methanol KW - Ethanol KW - Spark Ignition Engine KW - Gasoline KW - Simulation Y1 - 2021 UR - https://www.researchgate.net/publication/351688526_Multi-objective_Optimization_of_Gasoline_Ethanol_and_Methanol_in_Spark_Ignition_Engines ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Giri, Binod Raj A1 - Adil, Mohammad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Farooq, Aamir A1 - Mauß, Fabian T1 - Detailed Chemical Kinetic Study of Acetaldehyde Oxidation and Its Interaction with NOx T2 - Energy & fuels N2 - This work entails a detailed modeling and experimental study for the oxidation kinetics of acetaldehyde (CH3CHO) and its interaction with NOx. The ignition behavior of CH3CHO/O2/Ar has been investigated in a shock tube over the temperature range of 1149 to 1542 K, with equivalence ratios of 0.5 and 1.0 and pressures near 1.2 bar. Absorbance−time profiles of acetaldehyde were recorded using a mid-IR laser during the autoignition measurements. A comprehensive kinetic model has been developed to quantitatively predict the oxidation of acetaldehyde and its interaction with NOx. The kinetic model has been validated using experimental data of this work and available literature data from shock tube, plug flow, and jet-stirred reactors, freely propagating, and burner-stabilized premixed flames. For better accuracy of the kinetic model, the thermochemistry of 14 important species in the acetaldehyde submechanism was calculated using ab initio methods. The heat of formation of these species was computed using atomization and isodesmic reaction schemes. For the first time, this modeling study examines the effect of NO on acetaldehyde oxidation behavior over a wide range of experimental conditions. In most cases, the proposed kinetic model captures the experimental trends remarkably well. Interestingly, the doping of NO in CH3CHO did not perturb the NTC behavior of CH3CHO in contrast to other fuels, such as n-heptane and dimethyl ether. However, for flow reactor conditions at 1 atm, doping with 504 ppm of NO was found to promote the reactivity of acetaldehyde by lowering the onset temperature for CH3CHO oxidation by ∼140 K. The hydroxyl radical is the main cause of this shift, which originates from the NO + HO2 = OH + NO2 reaction. Further evolution of hydroxyl radicals occurs via the “NO−NO2” looping mechanism and expedites the reactivity of the system. This experimental and modeling work sheds new light on acetaldehyde oxidation behavior and its interaction with NOx under combustion-relevant conditions. KW - NOx KW - Kinetic modeling KW - Acetaldehyde KW - Ignition delay time Y1 - 2021 UR - https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c01948?ref=pdf U6 - https://doi.org/10.1021/acs.energyfuels.1c01948 SN - 1520-5029 SN - 0887-0624 VL - 35 IS - 18 SP - 14963 EP - 14983 ER - TY - GEN A1 - Issayev, Gani A1 - Giri, Binod Raj A1 - Elbaz, Ayman M. A1 - Shrestha, Krishna Prasad A1 - Mauß, Fabian A1 - Roberts, William L. A1 - Farooq, Aamir T1 - Ignition delay time and laminar flame speed measurements of ammonia blended with dimethyl ether: A promising low carbon fuel blend T2 - Renewable Energy N2 - Ammonia (NH3) has recently received much attention as a promising future fuel for mobility and power generation. The use of ammonia as a fueling vector can help curb global warming by cutting CO2 emissions because it is a carbon-free fuel and a hydrogen carrier with a high percentage of hydrogen atoms per unit volume. Liquid ammonia contains a higher volumetric density of hydrogen than liquid hydrogen. The low reactivity of ammonia, however, hinders its direct usage as a combustible fuel. One feasible way to boost the reactivity of ammonia is to target a dual-fuel system comprising of ammonia and a suitable combustion promoter. In this work, combustion properties of ammonia were investigated by blending it with various proportions of dimethyl ether (DME) using a rapid compression machine (RCM) and a constant volume spherical reactor (CVSR) over a wide range of experimental conditions. DME is a highly reactive fuel that may be produced in a sustainable carbon cycle with a net zero-carbon emission. Ignition delay times (IDTs) of NH3/DME blends were measured over a temperature (T) range of 649e950 K, pressures (P) of 20 and 40 bar, equivalence ratios (F) of 0.5 and 1 for a range of DME mole fractions (cDME) of 0.05e0.5 in the blends. In addition, the laminar burning velocities of NH3/DME blends were measured at P ¼ 1, 3 and 5 bar, F ¼ 0.8e1.3 and T ¼ 300 K for cDME ranging from 0.18 to 0.47. Our results suggest that DME is a good ignition promoter, resulting in a significant shortening of IDTs and an increase of flame speeds of NH3. A detailed chemical model has been developed and validated against the experimental data. Overall, our kinetic model offered reasonable predictive capabilities capturing the experimental trends over a wide range of conditions. In the worst-case scenario, our model underpredicted IDTs by a factor of ~2.5 while overpredicting laminar flame speed by ~20%. KW - DME KW - Lamianr flame speed KW - Ignition delay time KW - Kinetic modeling KW - Ammonia Y1 - 2022 UR - https://www.sciencedirect.com/science/article/pii/S0960148121014440?via%3Dihub#! U6 - https://doi.org/10.1016/j.renene.2021.09.117 SN - 1879-0682 VL - 181 SP - 1353 EP - 1370 ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Giri, Binod Raj A1 - Seidel, Lars A1 - Farooq, Aamir A1 - Mauß, Fabian T1 - A Kinetic Modeling Study for the Effect of NOx on Oxymethylene ethers (OMEn, n = 0 and 1) oxidation T2 - 10th European Combustion Meeting, Neapel N2 - We present a detailed kinetic model for the oxidation of dimethyl ether (OME0) and dimethoxymethane (OME1) in presence of NOx. We further explored the effect of NOx chemistry on the oxidation kinetics of the two OMEs. Our kinetic model is validated against the recent flow reactor data from Zhang et al. (Combust. Flame. 224 (2021) 94– 107). The results indicated that NO doping severely alters the oxidation kinetics of both fuels. The onset temperature for total fuel consumption is significantly shifted to lower temperatures for both fuels, which is in line with the experimental observation. We found that the addition of NO significantly inhibited the NTC behaviour of dimethyl ether. This inhibiting effect appears to stem from the competition between CH3OCH2O2 radical consumption by NO directly and the isomerization/dissociation reactions of CH3OCH2O2. Unlike dimethyl ether, dimethoxymethane does not exhibit a strong NTC behavior, and NO addition completely inhibited its weak NTC behavior. KW - DME KW - DMM KW - Oxymethylene ethers KW - NOx KW - Kinetic Modeling Y1 - 2021 UR - https://www.researchgate.net/publication/353620538_A_Kinetic_Modeling_Study_for_the_Effect_of_NOx_on_Oxymethylene_ethers_OMEn_n_0_and_1_oxidation CY - Neapel ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Giri, Binod Raj A1 - Elbaz, Ayman M. A1 - Issayev, Gani A1 - Roberts, William L. A1 - Seidel, Lars A1 - Mauß, Fabian A1 - Farooq, Aamir T1 - A detailed chemical insights into the kinetics of diethyl ether enhancing ammonia combustion and the importance of NOx recycling mechanism T2 - Fuel Communications N2 - In this work, we investigated the combustion characteristics of ammonia (NH3) by blending it with various proportions of diethyl ether (DEE). We measured laminar flame speed of various NH3/DEE blends (DEE, 10–40% by mole) using a constant volume spherical vessel at Ti = 298 K and Pi = 3 and 5 bar and Φ = 0.8–1.3. We developed a detailed kinetic model to describe the trends of the current and previously published experimental data. For the robustness of the model, we first developed a comprehensive diethyl ether kinetic mechanism to accurately characterize neat DEE oxidation behavior. We validated the kinetic model using a large pool of experimental data comprising shock tube, rapid compression machine, jet-stirred and flow reactors, freely propagating, and burner-stabilized premixed flames. The developed kinetic model performs remarkably in capturing the combustion behavior of pure DEE and NH3. Importantly, our model captures the experimental data of laminar flame speed and ignition delay times of various NH3/DEE blends over a wide range of conditions. We found that DEE is a promising candidate to promote the combustion characteristics of NH3. A small portion of DEE (10%) enhances the laminar flame speed of NH3 by a factor of 2 at Pi = 1 bar, Ti = 298 K, and Φ = 1.0. A further doubling of the DEE mole fraction to 20% did not enhance the laminar flame speed of NH3 with the same propensity. At low temperatures, adding 5% DEE in NH3 blend has significantly expedited the system reactivity by lowering the autoignition temperature. A further 5% increment of DEE (i.e., 10% DEE in NH3) lowers the autoignition temperature by ∼120 K to achieve the same ignition delay time. The “NOsingle bondNO2” looping mechanism predominantly drives such reactivity accelerating effect. Here, the reactions, NO + HO2 = NO2 + OH and NO2 + H = NO + OH, appear to enhance the reactive radical pool by generating OH radicals. We observed that the HNO path is favored more with increasing DEE content which eventually liberates NO. Other key reactions in “NOsingle bondNO2” looping mechanism are: CH3 + NO2 = CH3O + NO, CH3O2 + NO = CH3O + NO2, C2H5 + NO2 = C2H5O + NO, C2H5O2 + NO = C2H5O + NO2. In addition, CH3 + NH2(+M) = CH3NH2(+M) reaction is also one of the important cross-reactions which leads to the formation of HCN. Therefore, cross-reactions between the nitrogen and carbon family are crucial in accurately predicting autoignition timing. This work provides a detailed chemical insight into the NH3 and DEE interaction, which could be applied to other fuel blends of NH3. The kinetic model is also validated for several C1single bondC3 fuels including their interaction with NOx. KW - DEE KW - Ammonia KW - Kinetic Model KW - Laminar flame speed KW - Ignition delay time Y1 - 2022 U6 - https://doi.org/10.1016/j.jfueco.2022.100051 SN - 2666-0520 VL - 10 ER - TY - GEN A1 - Fritsche, Chris A1 - Eckart, Sven A1 - Shrestha, Krishna Prasad A1 - Mauß, Fabian A1 - Krause, Hartmut T1 - Methane flames with a substitution of 50 to 100 percent hydrogen: Experimental and numerical investigation of the temperature and pressure dependence of the laminar burning velocities T2 - 10th European Combustion Meeting, Proceedings of the European Combustion Meeting N2 - This work reports the laminar burning velocities for CH4/H2 blends in mixtures with air utilizing the constant volume chamber at temperatures from 300 to 423 K, pressures from 2 to 10 bar and equivalence ratios from 0.7 to 2.4. A detailed chemical kinetic model based on our previous work is used to reproduce the experimental data. The chemical kinetic model can reproduce the experimental data better at lean conditions compared to rich conditions. It is observed that with an increase in H2 fraction in fuel blend, laminar burning velocities increase. Model reveals that with increasing H2 fraction in the fuel blend, formation of key radicals H, OH and O are promoted leading to higher laminar burning velocities. The most sensitive reactions are O2+H=OH+O, CO+OH=CO2+H, CH4+H=CH3+H2 and CH4+OH=CH3+H2O. It is found that as initial mixture temperature increases, the laminar burning velocity increases and shows a linear trend whereas this trend is reversed as the initial pressure increases. KW - Methane KW - Hydrogen KW - Kinetic Model KW - Laminar burning velocity KW - Constant Volume chamber Y1 - 2021 UR - https://www.researchgate.net/publication/358415279_Methane_flames_with_a_substitution_of_50_to_100_percent_hydrogen_Experimental_and_numerical_investigation_of_the_temperature_and_pressure_dependence_of_the_laminar_burning_velocities ER - TY - GEN A1 - Fritsche, Chris A1 - Shrestha, Krishna Prasad A1 - Eckart, Sven A1 - Mauß, Fabian A1 - Krause, Hartmut T1 - Temperature and pressure dependency of the burning velocity in laminar premixed methanol and polyoxymethylene dimethyl ether (OME1, OME2, and OME3) flames T2 - 10th European Combustion Meeting, Proceedings of the European Combustion Meeting N2 - This work reports the laminar burning velocities (LBV) for the liquid fuels methanol, and polyoxymethylene dimethyl ethers (OMEn, n = 1-3) in mixtures with air utilizing the heat flux burner and constant volume chamber at temperature 393 to 443 K, pressure 1 to 10 bar, and equivalence ratio 0.6 to 1.9. Laminar burning velocities for OME2 and OME3 higher than 1 bar are reported for the first time. A detailed chemical kinetic model for OME2 and OME3 was developed based on our previous work utilizing experimental data from this work. Overall, model predictions are in good agreement with the experimental data. It is previously shown that with increases in unburned gas temperature laminar burning velocity increases and shows a linear trend with respect to temperature. Further, laminar burning velocity decreases with an increase of initial pressure. The dependence of burning velocity is not linear for all the fuels investigated. For comparable temperature and pressure conditions, it was found that with an additional CH2O group the laminar burning velocities increase marginally and there is no shift of maximum laminar burning velocity with respect to equivalence ratio. KW - Oxymethylene ethers KW - Lamianr burning velocity KW - Kinetic Modeling KW - heat flux burne KW - constant volume chamber Y1 - 2021 UR - https://www.researchgate.net/publication/358415681_Temperature_and_pressure_dependency_of_the_burning_velocity_in_laminar_premixed_methanol_and_polyoxymethylene_dimethyl_ether_OME1_OME2_and_OME3_flames ER - TY - GEN A1 - Shrestha, Krishna Prasad A1 - Seidel, Lars A1 - Zeuch, Thomas A1 - Mauß, Fabian T1 - Modeling of NOx Formation and Consumption during Oxidation of Small Alcohols T2 - 9th European Combustion Meeting, Proceedings of the European Combustion Meeting N2 - This work presents a newly developed kinetic mechanism extending our recent work (Shrestha et al. [1]) for the oxidation of methanol and ethanol and their fuel interaction with NO x chemistry in jet-stirred reactors, flow reactors, and burner-stabilized premixed flames. The work mainly focuses on fuel interaction with nitrogen chemistry and NO formation in laminar premixed flames. It is found that for methanol oxidation in jet-stirred reactor doping of the fuel blends with NO increase the reactivity of the system by increasing the net production of OH radicals. The increased amount of OH is formed via NO/NO 2 interconversion reaction channels NO+HO 2 ⇋NO 2 +OH, NO 2 +H⇋NO+OH, NO 2 +HO 2 ⇋HONO+O 2, followed by the thermal decomposition of HONO producing NO and OH. In burner-stabilized premixed flames studied here for methanol/air and ethanol/air, NO is mainly formed via the NCN route (CH+N 2 ⇋NCN+H) and minor contribution comes from the NNH route (NNN⇋N 2 +H). Y1 - 2019 UR - https://hal.archives-ouvertes.fr/hal-02334906 ER - TY - GEN A1 - Rakhi, Rakhi A1 - Shrestha, Krishna Prasad A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Thermodynamic analysis to develop a detailed surface reaction mechanism T2 - Fuel Science - From Production to Propulsion, Aachen, Germany, May 2022 N2 - The reduction of greenhouse gasses such as CO2 and CH4 is becoming necessary due to global environmental problems. The reforming of light hydrocarbons is a particularly efficient process for producing synthesis gas, H2 and CO, from greenhouse gasses [1]. The steam reforming of methane is the most important method to produce syngas in industry by using a nickel catalyst. Nickel-based catalysts are the conventional catalysts in industrial applications due to their fast turnover rates, good availability, and low costs, however, limited by their tendency towards coke formation. In this study, a detailed surface reaction mechanism is developed for steam reform-ing of methane over nickel and results are compared with the reference data. Y1 - 2022 UR - https://www.researchgate.net/publication/361279412_Thermodynamic_analysis_to_develop_a_detailed_surface_reaction_mechanism ER -