TY - GEN A1 - Krautz, Hans Joachim A1 - Nimtz, Michael T1 - Flexible Operation of CCS Power Plants to Match Variable Renewable Energies T2 - Energy Procedia N2 - The German Energiewende is resulting in high grid load changes caused by renewable energies. Therefore flexibility of power plants is getting more and more important. Future CCS power plants are usually equipped with more components than conventional power plants, resulting in a more complex and inert reaction on changes in power output. Additionally, due to the change in price structures and higher fixed and operational costs for CCS power plants, it is harder for them to be economically efficient. This study will show different options to increase the flexibility of CCS power plants and evaluate their benefits. KW - CCS; Flexibility; Post combustion capture; Oxyfuel; Solvent storage; Pipeline Y1 - 2013 U6 - https://doi.org/10.1016/j.egypro.2013.08.034 SN - 1876-6102 VL - 2013 IS - 40 SP - 294 EP - 303 ER - TY - GEN A1 - Krautz, Hans Joachim A1 - Corrêa da Silva, Rodrigo A1 - Kangwanpongpan, Tanin T1 - Flame pattern, temperatures and stability limits of pulverized oxy-coal combustion T2 - Fuel : the science and technology of fuel and energy N2 - The challenges in maintaining a stable oxy-coal flame have been reported in the open literature. In case of pulverized coal combustion, narrower flammable regimes arise not only of differences in the feed gas composition, but also due to changes in the flow dynamics because of reduced volume flow rate through the burners to match similar temperatures and radiative heat transfer within the furnace. The present work focuses on the study of flame structure and stability of pre-dried lignite fired by a staged feed-gas burner. Experimental runs were carried out in a 0.40 MWth laboratory facility, with the objective of investigating the effects of swirl strength and feed gas distribution in the burner registers. To assess the experimental data, a numerical study of the non-reacting flow in the near burner region is performed. Predicted flow pattern and flame images show that the primary fuel jet penetrates the internal recirculation zone, forming an annular doughnut reverse flow region for both firing conditions and resembling a type-1 flame pattern. Temperature measurements indicate that the feed gas distribution among the burner registers control the flame temperature in parallel with the swirl number in both air-fired and oxy-fired environments. The oxy-fuel cases exhibite markedly reduced temperatures on the flame axis. This difference in the core arises not just from the more pronounced penetration depth of the primary jet, but also due to reaction mechanisms including pyrolysis and gasification reactions at the higher concentrations of CO2 and water vapor. Flame stabilization is shown to be strongly dependent on an appropriate distribution of the feed gas and strength of swirling flow in the burner front. The results correlated in terms of swirl number, secondary/tertiary flow ratio and secondary/primary axial momentum point to similarities in the stability limits between air-firing and oxy-firing. KW - Oxy-fuel; Pulverized coal combustion; Flame pattern; Stability limits Y1 - 2014 U6 - https://doi.org/10.1016/j.fuel.2013.07.049 SN - 0016-2361 IS - Vol. 115 SP - 507 EP - 520 ER - TY - CHAP A1 - Tannert, Daniel A1 - Krüger, Perco A1 - Krautz, Hans Joachim T1 - Untersuchung der alkalischen Druckelektrolysetechnologie am Wasserstoff-Forschungszentrum der BTU Cottbus-Senftenberg T2 - 45. Kraftwerkstechnisches Kolloquium, Dresden, Oktober 2013 Y1 - 2013 SN - 978-3-944310-04-6 ER - TY - GEN A1 - Lechner, Stefan A1 - Merzsch, Matthias A1 - Krautz, Hans Joachim T1 - Heat-transfer from horizontal tube bundles into fluidized beds with Geldart A lignite particles T2 - Powder Technology N2 - This work investigates the heat transfer mechanism in fluidized beds equipped with horizontal heat exchanger surfaces such as single tubes and especially tube bundles. Previous works were performed for varying operating conditions and solids' material properties, leading to a heterogeneous and therefore not applicable spectrum of derived correlations for the influence of tube diameter and tube bundle geometry on heat transfer. Based on a wide range validation of the correlation for the influence of single tube diameter on heat transfer coefficient, tube bundles with different tube diameters and horizontal and vertical spacings and alignments were investigated. Experiments were carried out using electrical heat transfer probes in a 0.15 m2 fluidized bed test facility at ambient conditions. Geldart A lignite and Geldart D solids were used in order to distinguish between predominant particle-convective and gas-convective heat transfer mechanisms. The tube bundle reduction factor on heat transfer coefficient was derived as a key parameter based on dimensionless geometric numbers. This factor predicts the reduction of the heat transfer coefficient compared to that of the single tube due to the particle and gas flow disturbances caused by the immersed tubes. Tube diameter as well as tube bundle geometry were successfully implemented into useful correlations for predicting tube bundles' heat transfer of gas–solid fluidized bed systems operating with fine particles. KW - Fluidized bed KW - Lignite KW - Drying KW - Heat transfer KW - Horizontal tubes KW - Tube bundle Y1 - 2014 U6 - https://doi.org/10.1016/j.powtec.2013.10.041 IS - 253 SP - 14 EP - 21 ER - TY - CHAP A1 - Fischer, Ulrich A1 - Voigt, Andre A1 - Tannert, Daniel A1 - Krautz, Hans Joachim T1 - Pressure and Temperature Influence on Alkine Electrolysis Performance T2 - Proceedings of 5th European PEFC and H2 Forum, Luzern, Schweiz, June/July 2015 Y1 - 2015 SN - 978-3-905592-19-1 PB - European Fuel Cell Forum AG CY - Luzern-Adligenswil ER - TY - CHAP A1 - Fischer, Ulrich A1 - Voigt, Andre A1 - Tannert, Daniel A1 - Krautz, Hans Joachim T1 - Influence of variable operating parameters on the process of the advanced alkaline pressurised electrolysis T2 - 9th International Renewable Energy Storage Conference and Exhibition (IRES 2015), 09 - 11 March 2015, Düsseldorf, Germany Y1 - 2015 PB - EUROSOLAR [u.a.] CY - Bonn ER - TY - CHAP A1 - Fischer, Ulrich A1 - Rabann, Bernd A1 - Krautz, Hans Joachim T1 - Wasserstoff – Elektrolyse T2 - Erneuerbare Energien : VBI-Leitfaden Y1 - 2015 SP - 85 EP - 92 PB - Verband Beratender Ingenieure CY - Berlin ET - 1. Auflage ER - TY - CHAP A1 - Krüger, Perco A1 - Nimtz, Michael A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim ED - Schulz, Detlef T1 - Einsatzsimulation zur Erbringung von Primärregelleistung mit Batteriespeichern T2 - Nachhaltige Energieversorgung und Integration von Speichern, Tagungsband zur NEIS 2015 Y1 - 2015 SN - 978-3-658-10957-8 SP - 95 EP - 101 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Fischer, Ulrich A1 - Voigt, Andre A1 - Tannert, Daniel A1 - Krautz, Hans Joachim T1 - Druckelektrolyse zur Wasserstoffherstellung- eine Kurzübersicht zu energetischen Vor- und Nachteilen T2 - Nutzung regenerativer Energiequellen und Wasserstofftechnik 2015, 22. Symposium Nutzung Regenerativer Energiequellen und Wasserstofftechnik, Stralsund, 5. - 7. November 2015 Y1 - 2015 SN - 978-3-9817740-0-9 SP - 30 EP - 36 PB - Fachhochschule Stralsund CY - Stralsund ER - TY - CHAP A1 - Krüger, Perco A1 - Nimtz, Michael A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim T1 - Simulation des Einsatzes von kapazitiv begrenzten Anlagen in der Primärregelleistung T2 - Kraftwerkstechnik 2015, Strategien, Anlagentechnik und Betrieb,Beiträge des 47. Kraftwerkstechnischen Kolloquiums vom 13. und 14. Oktober 2015 in Dresden Y1 - 2015 SN - 978-3-934409-70-5 SP - 667 EP - 682 PB - SAXONIA CY - Freiberg ER - TY - GEN A1 - Katzer, Christian A1 - Klatt, Matthias A1 - Lisk, Alexander A1 - Krautz, Hans Joachim T1 - Erste Untersuchungsergebnisse an einem elektrisch zündenden Kohlenstaubbrennersystem T2 - Verbrennung und Feuerung, 27. Deutscher Flammentag, Clausthal-Zellerfeld, 16. und 17. September 2015 Y1 - 2015 SN - 978-3-18-092267-6 SP - 17 EP - 28 PB - VDI-Verlag CY - Düsseldorf ER - TY - CHAP A1 - Katzer, Christian A1 - Klatt, Matthias A1 - Lisk, Alexander A1 - Krautz, Hans Joachim T1 - Experimentelle Untersuchungen zur Entwicklung eines elektrisch zündenden Kohlestaubbrenners T2 - Kraftwerkstechnik 2015, Strategien, Anlagentechnik und Betrieb, Beiträge des 47. Kraftwerkstechnischen Kolloquiums vom 13. und 14. Oktober 2015 in Dresden Y1 - 2015 SN - 978-3-934409-70-5 SP - 279 EP - 288 PB - SAXONIA CY - Freiberg ER - TY - CHAP A1 - Katzer, Christian A1 - Babul, Konrad A1 - Klatt, Matthias A1 - Krautz, Hans Joachim T1 - Quantitative and qualitative relationship between the flame stability and flame length T2 - Proceedings of the XXII International Symposium on Combustion Processes, Polish Jurassic Highland (Jura Region), Poland, September 22-25, 2015 Y1 - 2015 SN - 978-83-61506-28-7 PB - Instytut Techniki Cieplnej Politechniki Śląskiej CY - Gliwice ER - TY - CHAP A1 - Krautz, Hans Joachim A1 - Guerrero Amezcua, Cinthya Larissa A1 - Ziems, Christian T1 - Future Developments of the Photovoltaic Technologies in germany and their Consequences in the Power Network stability, the System security and the demand of chemical long-term storage T2 - SASEC 2015, Third Southern African Solar Energy Conference, 11 – 13 May 2015, Kruger National Park, South Africa Y1 - 2015 UR - http://hdl.handle.net/2263/49472 SP - 383 EP - 388 ER - TY - GEN A1 - Katzer, Christian A1 - Babul, Konrad A1 - Klatt, Matthias A1 - Krautz, Hans Joachim T1 - Quantitative und qualitative relationship between swirl burner operating conditions and pulverized coal flame length T2 - Fuel Processing Technology KW - Flame length KW - Flame stability KW - Swirl burner KW - Pulverized coal KW - Image processing Y1 - 2017 U6 - https://doi.org/10.1016/j.fuproc.2016.10.013 SN - 0378-3820 VL - 156 SP - 138 EP - 155 ER - TY - CHAP A1 - Ziems, Christian A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim A1 - Luschtinetz, Thomas A1 - Lehmann, Jochen T1 - Project presentation-Novel 3D porous electrode materials for more efficient alkaline water electrolysis-AEL3D T2 - Nutzung regenerativer Energiequellen und Wasserstofftechnik 2016, 23. Symposium Nutzung Regenerativer Energiequellen und Wasserstofftechnik, Stralsund, 3. - 5. November 2016 Y1 - 2016 SN - 978-3-9817740-1-6 SP - 175 EP - 181 PB - Fachhochschule CY - Stralsund ER - TY - CHAP A1 - Fischer, Ulrich A1 - Tannert, Daniel A1 - Voigt, Andre A1 - Ziems, Christian A1 - Krautz, Hans Joachim A1 - Barz, Mirko A1 - Dinkler, Konstantin T1 - Renewable Energy Storage by Hydrogen Production from Water Electrolysis T2 - Technical and Economic Aspects of Renewable Energies - Know-How Transfer as Development Opportunity for Southern Europe Y1 - 2016 SN - 978-3-86387-721-7 SP - 118 EP - 126 PB - Mensch und Buch CY - Berlin ER - TY - CHAP A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim A1 - Wenske, Michael A1 - Tannert, Daniel A1 - Krüger, Perco A1 - Ziems, Christian A1 - Stolten, Detlef A1 - Emonts, Bernd T1 - Hydrogen Hybrid Power Plant in Prenzlau, Brandenburg T2 - Hydrogen Science and Engineering - Materials, Processes, Systems and Technology, Bd. 2 Y1 - 2016 SN - 978-3-5273323-8-0 SP - 1033 EP - 1052 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Guerrero, Cinthya A1 - Klatt, Matthias A1 - Krautz, Hans Joachim T1 - Energy transition in Germany: a case study on renewable energy integration and its impact in the operation and efficiency of coal-fired power plants T2 - Southern African Energy Efficiency Convention (SAEEC 2017), 14th and 15th November 2017, Gauteng, Südafrika Y1 - 2017 UR - http://www.saee.org.za/cproceedings2017.aspx#K SN - 978-0-6399125-0-9 ER - TY - GEN A1 - Mieck, Sebastian A1 - Krautz, Hans Joachim T1 - Systematic analysis and preparation of high resolution in-situ measurements for the estimation of PV module parameters T1 - Systematische Analyse und Aufbereitung von hoch-aufgelösten in-situ Messdaten für die Identifikation von Photovoltaik Modulparametern T2 - VGB PowerTech N2 - In the last two decades, a rapid expansion of photovoltaic (PV) power plants of different sizes has taken place. Along with this, the interest from science and industry is growing, exploring the strengths and weaknesses of this technology as well as further developing the efficiency in its production and operation. For planning and operating of PV power plants, valid energy yield forecasts are desirable. These forecasts are also important to draw conclusions for the monitoring of future PV technologies. The analysis, evaluation and processing of meteorological and technical measurement datasets play an essential role. In this article, high-resolution measurement data sets of a mobile, autarkic test system are analyzed firstly. The measured data are checked for plausibility and validity with the corresponding methods. After this observations and phenomena with meteorological cause are described. In a second step, a practicable procedure for the preparation of the measurement data is presented, in order to make it suitable for further calculations, e.g. identification of photovoltaic module parameters for energy yield calculations. The focus is particularly on the flexibility, adaptability and code performance of the processing procedure. Results, evaluations and outlooks on the methods used, measurement data and selected software packages are made. N2 - In den letzten zwei Dekaden ist ein rascher Zubau von Photovoltaik(PV)-Kraftwerken verschiedener Leistungsgrößen zu konstatieren. Damit einhergehend wächst das Interesse aus Wissenschaft und Wirtschaft, Stärken und Schwächen der Technologie zu ergründen sowie die Effizienz in Herstellung und Betrieb weiter zu entwickeln. Für Planung und Betrieb von PV-Kraftwerken sind z.B. valide Ertragsprognosen anzustreben, aber auch Rückschlüsse aus dem Monitoring für zukünftige PV-Technologien zu ziehen. Die Analyse, Auswertung und Verarbeitung von meteorologischen und technischen Messdatensätzen spielt dabei eine wesentliche Rolle. Im diesem Artikel werden zeitlich hoch aufgelöste Messdatensätze eines mobilen, autarken Testsystems in einem ersten Schritt analysiert. Dabei werden die Messdaten auf Plausibilität und Validität mit entsprechenden Methoden überprüft, spezielle Beobachtungen und Phänomene mit meteorologischer Ursache beschrieben. In einem zweiten Schritt wird eine praktikable Vorgehensweise für die Aufbereitung der Messdaten vorgestellt, um diese für weiterführende Berechnungen, z.B. Identifikation von Photovoltaik Modulparametern für Ertragsberechnungen, verfügbar zu machen. Im Vordergrund stehen insbesondere die Flexibilität, Adaptierbarkeit sowie Codeperformanz der Aufbereitungsprozedur. Es werden Ergebnisse, Einschätzungen und Ausblicke zu den verwendeten Methoden, Messdaten, sowie gewählter Software Pakete vorgenommen. KW - Photovoltaic KW - Data preparation Y1 - 2018 SN - 1435-3199 VL - 98 IS - 8 SP - 75 EP - 81 ER - TY - GEN A1 - Abang, Roger Atini A1 - Weiß, Sabine A1 - Krautz, Hans Joachim T1 - Impact of increased power plant cycling on the oxidation and corrosion of coal-fired superheater materials T2 - Fuel N2 - As power generation from variable renewable energy sources such as wind and solar power continues to increase in the future, fewer baseload power plants will be needed. As a result, high operational flexibility is becoming a vital requirement for conventional power plants to allow for the smooth integration of the variable renewable energy sources (v-RES) into the grid. To understand the impact of high operational flexibility (increased cycling) for coal-fired power plant materials, five commercial coal boiler superheater and reheater materials were investigated under isothermal and cyclic conditions for 1000 h each. The candidate alloys investigated were: T91, VM12-SHC, TP347-HFG, DMV304 HCu and DMV310 N. The results (weight change kinetics and metallographic analysis) after exposure at a metal surface temperature of 650 °C clearly showed the impact of increased flexibility on the corrosion and oxidation of the materials. Oxide growth (weight gain), metal loss, oxide spallation, and grain boundary attack were found to be more severe under cyclic conditions than under isothermal conditions. KW - Power plant flexibility, Isothermal oxidation, Cyclic oxidation, High temperature corrosion, Superheaters Y1 - 2018 U6 - https://doi.org/10.1016/j.fuel.2018.02.047 SN - 0016-2361 VL - 2018 IS - 220 SP - 521 EP - 534 ER - TY - GEN A1 - Dahash, Abdulrahman A1 - Mieck, Sebastian A1 - Ochs, Fabian A1 - Krautz, Hans Joachim T1 - A comparative study of two simulation tools for the technical feasibility in terms of modeling district heating systems: An optimization case study T2 - Simulation Modelling Practice and Theory N2 - District heating dynamic models arise as an alternative approach to in-situ experimental investigations. The main advantage of dynamic modeling and simulation is the possibility to avoid technical and operational risks that might occur during in-situ experimental investigations (e.g. heat demand is not met, damages in the energy systems etc.). Within this study, the authors present two models for an existing district heating system in Cottbus, Germany. One model is developed using the tool EBSILON Professional, while the other one is developed using the Simscape toolbox for physical modeling in Matlab/Simulink. The models were experimentally validated against measured data from the considered district heating system. The results show that the Simscape model has a better fit and better response than the EBSILON model. Yet, some discrepancies were found between the measured and the simulated data and, therefore, the uncertainties of the models were addressed. A comparative study between both tools is presented. The EBSILON models permit only unidirectional flow, whereas the Simscape toolbox permits reverse flow. Nevertheless, the EBSILON model outperforms the Simscape model in computation time. In addition, this study presents an approach for dynamic thermo-hydraulic modeling of district heating networks. This approach is utilized to examine the role of district heating networks as heat storage as an optimization configuration. The numerical results show less start-ups for additional heat sources. Yet, higher heat losses from the network are observed due to the installation of unburied pipelines. KW - Dynamic thermo-hydraulic modeling and simulation KW - Simscape KW - EBSILON Professional KW - District heating systems KW - Heating network as heat storage Y1 - 2019 U6 - https://doi.org/10.1016/j.simpat.2018.11.008 SN - 1569-190X VL - 91 SP - 48 EP - 68 ER - TY - GEN A1 - Tannert, Daniel A1 - Ziems, Christian A1 - Voigt, André A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim T1 - Wasserstoff- und Elektrolyseforschung an der BTU Cottbus - Senftenberg T2 - VGB PowerTech Y1 - 2018 SN - 1435-3199 VL - 98 IS - 8 SP - 65 EP - 69 ER - TY - GEN A1 - Ziems, Christian A1 - Fischer, Ulrich A1 - Krautz, Hans Joachim T1 - Entwicklung und anwendungsbezogene Charakterisierung von effizienten, hochleistungsfähigen 3D-Elektrodenmaterialien für die alkalische Druckelektrolysetechnologie T2 - VGB PowerTech Y1 - 2018 SN - 1435-3199 VL - 98 IS - 8 SP - 70 EP - 74 ER - TY - GEN A1 - Voigt, André A1 - Fischer, Ulrich A1 - Tannert, Daniel A1 - Krautz, Hans Joachim T1 - Analyse erneuerbarer P2H2 Energiesystemkonfigurationen unter Verwendung von Matlab T2 - Nutzung regenerativer Energiequellen und Wasserstofftechnik 2017 ; 24. Symposium Nutzung Regenerativer Energiequellen und Wasserstofftechnik, Stralsund, 09. bis 11. November 2017 Y1 - 2017 SN - 978-3-9817740-3-0 SP - 143 EP - 147 PB - HOST - Hochschule Stralsund CY - Stralsund ER - TY - GEN A1 - Fischer, Ulrich A1 - Voigt, André A1 - Tannert, Daniel A1 - Krautz, Hans Joachim T1 - Standortevaluierung und System-pfadanalyse im Forschungsprojekt WESpe – Wissenschaftliche Forschung zu Windwasserstoff-Energiespeichern T2 - Nutzung regenerativer Energiequellen und Wasserstofftechnik 2016 ; energie-symposium, 23. Symposium Nutzung Regenerativer Energiequellen und Wasserstofftechnik, Stralsund, 3. - 5. November 2016 Y1 - 2016 SN - 978-3-9817740-1-6 VL - 2016 SP - 143 EP - 147 PB - Fachhochschule Stralsund CY - Stralsund ER - TY - GEN A1 - Katzer, Christian A1 - Krautz, Hans Joachim T1 - Untersuchungen zur messtechnischen Erfassung von instationären Effekten eines Gas-/Kohle-Kombibrenners T2 - 29. Deutscher Flammentag : 17. - 18. September 2019 Ruhr-Universität Bochum N2 - In diesem Beitrag wird ein Flammenbewertungsverfahren auf Basis eines Flammenwächtersignals vorgestellt. Mit zunehmender Flexibilisierung der Verbrennungsanlagen und der Absenkung von Emissionsgrenzwerten wird eine unmittelbare Flammenanalyse für die Regelung der Brennersysteme zunehmend erforderlich. Auf Basis eines Flammenwächtersignals wird mittels Frequenzanalyse ein ergänzendes Auswertungsverfahren dargestellt. Anhand der vorgestellten Untersuchungen an einem Erdgas-/Kohle-Kombibrenner wird die Qualifizierung der Prozessmesstechnik für die Flammenbewertung und Brennersteuerung überprüft. Die Ergebnisse im Erdgas- und Kohlebetrieb belegen, dass mit der erweiterten Signalanalyse eine Veränderung des Flammenverhaltens mit dem Flammenwächtersignal in Zusammenhang gebracht werden kann. Dabei konnte einmal das Emissionsverhalten bei verschiedenen Brennereinstellungen beurteilt werden und andererseits ein Zugriff auf das Stabilitätsverhalten der Kohleflamme ermöglicht werden. Durch die Analyse des Strahlungssignals der Chemilumineszenz des OH* bzw. CH*-Radikals ist ein Bezug zur Veränderung in der Reaktionszone hergestellt. Die entwickelte Bewertungsmethodik kann für die Entwicklung und Etablierung von Beobachter- und Regelmodellen von Brennersystemen genutzt werden. Y1 - 2019 UR - http://www.leat.rub.de/deutsch/Flammentag/Tagungsprogramm.pdf ER - TY - GEN A1 - Katzer, Christian A1 - Schierack, Frank A1 - Krautz, Hans Joachim T1 - Die TBK- Feuerung im Labor und an einem Großdampfer-zeuger: Parallelen im Last- und Emissionsverhalten T2 - Verbrennung und Feuerung, 28. Deutscher Flammentag, Darmstadt, 06. und 07. September 2017 N2 - Mit der steigenden Erzeugung volatilen Stroms aus erneuerbaren Energien werden die Anforderungen an die Flexibilität der konventionellen Kraftwerke erhöht. Der Einsatz von Stützfeuerungssystemen auf Basis von Trockenbraunkohle (TBK) ermöglicht die Erweiterung des Lastbereiches und der Lastgradienten am Dampferzeuger. Untersuchungen zum Teillastverhalten von TBK-Brennern wurden an der BTU Cottbus – Senftenberg an einem 400 kWth Verbrennungsversuchstand und an dem industriellen 30 MWth TBK-Staubbrenner der Firma BBS (Babcock Borsig Steinmüller GmbH) durchgeführt. Der verfügbare Einsatzbereich des Brenners ist maßgeblich von der Intensität den brennernahen Mischungsvorgang abhängig. Mit der Absenkung der Brennerleistung ist beispielsweise eine signifikante Steigerung der NOx-Emission verbunden. Dieser Effekt ist auf die Veränderung des brennernahen Strömungsprofiles zurückzuführen. Mit Maßnahmen wie der Erhöhung der Drallzahl, Verteilung der Luftimpulsströme und Veränderung des Primärimpulses konnte eine Stabilisierung und Intensivierung der Reaktionszone und somit eine Verbesserte des Teillastverhaltens nachgewiesen werden. 1. Y1 - 2017 SN - 978-3-18-092302-4 SP - 39 EP - 51 PB - Düsseldorf CY - VDI-Verl. ER - TY - GEN A1 - Katzer, Christian A1 - Schierack, Frank A1 - Tappe, Stephanie A1 - Krautz, Hans Joachim ED - Beckmann, Michael T1 - Ergebnisse der Untersuchungen zur Betriebsstabilität und des Emissionsverhaltens der TBK-Feuerung im Labor und an einem Großdampferzeuger T2 - Kraftwerkstechnik 2017 : Strategien, Anlagentechnik und Betrieb Y1 - 2017 SN - 978-3-934409-79-8 SP - 269 EP - 278 PB - Saxonia Standortentwicklungs und -verwaltungsgesellschaft mbH CY - Freiberg ER - TY - RPRT A1 - Krautz, Hans Joachim A1 - Möhlenkamp, Georg A1 - Sakkas, Nikolaos Panagiotis A1 - Gillung, Frank A1 - Lenivova, Veronika T1 - Verbundvorhaben AEL3D - Neuartige poröse 3D-Elektrodenmaterialen zur effizienteren alkalischen Wasserelektrolyse; Teilprojekt: Zellbau und Systemtests : fachlicher Abschlussbericht : Projektlaufzeit: 01.09.2016-31.12.2021 KW - Dimension 3 KW - Alkalische Reaktion KW - Wasser KW - Elektrode KW - Poröser Stoff KW - Elektrolyse Y1 - 2022 U6 - https://doi.org/10.2314/KXP:1859085385 PB - KWT Lehrstuhl Kraftwerkstechnik, BTU Brandenburgische Technische Universität Cottbus-Senftenberg CY - Cottbus ER - TY - RPRT A1 - Krautz, Hans Joachim A1 - Möhlenkamp, Georg A1 - Katzer, Christian A1 - Klatt, Matthias T1 - Konzepte und Betriebsstrategien für lastflexible Feuerungs- und Dampfsysteme : Abschlussbericht : Laufzeit des Vorhabens: 01.09.2016 bis 31.12.2021 KW - Feuerung KW - Dampfsystem KW - lastflexibel Y1 - 2022 U6 - https://doi.org/10.2314/KXP:1861122357 PB - btu Brandenburgische Technische Universität Cottbus-Senftenberg CY - Cottbus ER -