TY - CHAP A1 - Köhler, Ekkehard A1 - Möhring, Rolf H. A1 - Nökel, K. A1 - Wünsch, Gregor T1 - Optimization of signalized traffic networks Y1 - 2008 ER - TY - CHAP A1 - Hilsenbeck, Jochen A1 - Lenk, Friedrich A1 - Lossy, Richard A1 - Würfl, Joachim A1 - Kohler, K. A1 - Obloh, H. T1 - DC and microwave properties of 0.5 um AlGaN/GaN high electron mobility transistors fabricated on 2-inch process line T2 - IEEE International Symposium on Compound Semiconductors, held in Monterey, California, 2 - 5 October 2000 N2 - DC and RF characteristics of AlGaN/GaN HEMTs processed by 2-inch stepper lithography are presented. The devices, grown by MOVPE on 2" sapphire wafers consist of: GaN buffer, Al0.25Ga0.75 N spacer, doped Al0.25Ga0.75N supply layer, Al0.25Ga0.75N barrier, GaN cap. Refractory source and gate contacts along with mesa isolation and air bridge technology are applied. Typical values for maximum saturation current, transconductance and pinch-off voltage are: 616 m/A/mm, 203 mS/mm, -3.5 V with very good homogeneity across 2". The cut off frequencies fT and fmax are 24 and 54 GHz respectively. A standard small signal equivalent circuit model exactly describes DC- and microwave properties Y1 - 2000 SN - 0-7803-6258-6 U6 - https://doi.org/10.1109/ISCS.2000.947181 SP - 351 EP - 356 PB - IEEE Service Center CY - Piscataway, NJ ER - TY - GEN A1 - Richter, Sandra A1 - Kukkadapu, Goutham A1 - Westbrook, Charles K. A1 - Braun-Unkhoff, Marina A1 - Naumann, Clemens A1 - Köhler, Markus A1 - Riedel, Uwe T1 - A combined experimental and modeling study of combustion properties of an isoparaffinic alcohol-to-jet fuel T2 - Combustion and Flame Y1 - 2022 U6 - https://doi.org/10.1016/j.combustflame.2022.111994 SN - 0010-2180 VL - 240 PB - Elsevier BV ER - TY - GEN A1 - Opitz, Joerg A1 - Wunderlich, Christian A1 - Bendjus, B. A1 - Cikalova, U. A1 - Wolf, C. A1 - Naumann, S. A1 - Lehmann, A. A1 - Barth, M. A1 - Duckhorn, Frank A1 - Köhler, B. A1 - Tschöke, K. A1 - Windisch, T. A1 - Tschöpe, Constanze A1 - Moritz, T. A1 - Scheithauer, U. T1 - Materialdiagnose und integrale Prüfverfahren für keramische Bauteile T2 - Keramische Zeitschrift N2 - Hochleistungskeramiken findet man heute häufig als kritische Komponente in neuentwickelten Systemen für Zukunftsanwendungen. Die Zuverlässigkeit des gesamten Systems basiert hierbei oft auf der kritischen keramischen Komponente. Für diese oft neuentwickelten keramischen Materialien werden neue Methoden für die Prozesssteuerung, Materialdiagnostik und Strukturüberwachung benötigt. In diesem Artikel werden drei für die Keramikcharakterisierung am Fraunhofer-Institut für Keramische Technologien und Systeme IKTS weiter entwickelte Technologien und Verfahren beschrieben und deren Einsatz anhand von Beispielen illustriert. Dazu werden die Laser-Speckle-Photometrie, die optische Kohärenztomographie und die Klanganalyse in Kombination mit einer entsprechenden akustischen Mustererkennung als leistungsfähige Verfahren für die Materialdiagnostik im Bereich der keramischen Materialien vorgestellt. T2 - Materials diagnostics and integrated testing technology for ceramic parts Y1 - 2016 U6 - https://doi.org/10.1007/BF03400267 SN - 0023-0561 VL - 68 IS - 4-5 SP - 249 EP - 254 PB - Springer Science and Business Media LLC CY - Berlin ; Heidelberg ER -