TY - JOUR A1 - Kühhorn, Arnold A1 - Klauke, Thomas A1 - Golze, Mark T1 - Simulation und Verifikation der sukzessiven Bruchabfolge eines CFK-Bauteils mittels neuartiger Bruchkriterien KW - CFK-Bauteile KW - Bruchkriterien KW - Simulation Bruchabfolge Y1 - 2003 ER - TY - JOUR A1 - Kühhorn, Arnold A1 - Beirow, Bernd A1 - Klauke, Thomas A1 - Golze, Mark T1 - Simulation der Mistuningeffekte von Hochdruckverdichter-Schaufelscheiben zur Bestimmung kritischer Schwingungen in Flugtriebwerken KW - Mistuningeffekte KW - Blisks Y1 - 2004 ER - TY - CHAP A1 - Klauke, Thomas A1 - Beirow, Bernd A1 - Kühhorn, Arnold T1 - Experimental and numerical investigations of blade mistuning and strain gauge application effects in aero engine development Y1 - 2005 ER - TY - CHAP A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Golze, Mark A1 - Klauke, Thomas T1 - Strukturdynamische Untersuchungen an Hochdruckverdichterschaufelscheiben unter Berücksichtigung von Mistuningeffekten T2 - Modalanalyse und Identifikation, Verfahren und Anwendungen bei dynamischen Systemen, Tagung Wiesloch, 25. und 26. Mai 2004 KW - Verdichterschaufelscheiben KW - Mistuningeffekte Y1 - 2004 SN - 3-18-091825-X SP - 351 EP - 372 PB - VDI-Verlag CY - Düsseldorf ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Beirow, Bernd T1 - Numerische Untersuchung des Schwingverhaltens von Hochdruckverdichter-Blisks mit fertigungsbedingten Anweichungen KW - Blisks KW - Schwingverhalten Y1 - 2004 ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Liang, Luo A1 - Kober, Markus T1 - Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge N2 - Internationale AVK-Tagung, 13.-14. September 2010, Essen Y1 - 2010 ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Liang, Luo A1 - Kober, Markus A1 - Sieghart, D. A1 - Führer, M. A1 - Viehweger, Bernd A1 - Fritzsche, Christoph A1 - Sarradj, Ennes T1 - Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge N2 - Deutscher Luft- und Raumfahrkongress 2010, 31.08. - 02.09.2010, Hamburg Y1 - 2010 ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Kober, Markus T1 - Application of a Newer Inter-Fiber-Failure Criteria on CFRPs in Aero Engine Development Y1 - 2010 ER - TY - CHAP A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Klauke, Thomas T1 - Lokalisierungsphänomen bei Hochdruckverdichterschaufelscheiben KW - Schaufelscheiben KW - Hochdruckverdichter Y1 - 2006 ER - TY - JOUR A1 - Kühhorn, Arnold A1 - Beirow, Bernd A1 - Klauke, Thomas T1 - Theoretische und experimentelle Untersuchungen von Schaufelschwingungen bei Verdichterintegralrädern KW - Schaufelschwingungen Y1 - 2006 ER - TY - CHAP A1 - Kober, Markus A1 - Kühhorn, Arnold A1 - Klauke, Thomas T1 - Auslegung einer Flanschverbindung aus faserverstärktem Kunststoff durch Optimierung der Faserorientierungen und Schichtdicken mit Hilfe von Altair HyperStudy unter Verwendung eines Wirkebenenbruchkriteriums als Nebenbedingung Y1 - 2007 ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Beirow, Bernd T1 - Blade Mistuning Induced Blisk Vibration T2 - 1st CEAS European Air and Space Conference 2007, Deutscher Luft- und Raumfahrtkongress 2007, 10 - 13 September 2007, Berlin, Germany, Bd. 1 Y1 - 2007 SP - 335 EP - 345 PB - Dt. Ges. für Luft- und Raumfahrt CY - Bonn ER - TY - CHAP A1 - Kober, Markus A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Lenk, Olaf T1 - Einbindung eines modernen Wirkebenenbruchkriteriums für faserverstärkte Kunststoffe in eine Parameteroptimierung mit Altair HyperStudy Y1 - 2006 ER - TY - CHAP A1 - Kober, Markus A1 - Kühhorn, Arnold A1 - Klauke, Thomas A1 - Lenk, Olaf T1 - Topology-Optimized Intermediate Casing of Aero Engine and Comparative Evaluation of Titanium and Composite Architecture in Terms of Load Capacity and Weight Reduction T2 - Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol. 5, part A Y1 - 2008 SN - 978-0-7918-4315-4 N1 - GT2008-50644 SP - 69 EP - 79 PB - ASME CY - New York, NY ER - TY - CHAP A1 - Klauke, Thomas A1 - Kühhorn, Arnold A1 - Beirow, Bernd A1 - Parchem, Roland T1 - Blade Vibration Phenomena of HPC Bliscs Considering Manufacturing Effects and Strain Gauge Application T2 - Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol. 5, part A Y1 - 2008 SN - 978-0-7918-4315-4 SP - 403 EP - 413 PB - ASME CY - New York, NY ER - TY - GEN A1 - Klauke, Thomas A1 - Strehlau, Ulrik A1 - Kühhorn, Arnold T1 - Integer Frequency Veering of Mistuned Blade Integrated Disks T2 - Journal of Turbomachinery N2 - As a result of more balanced blade aspect ratios of modern blade-integrated disks (blisks), interactions between disk-dominated and blade-dominated modes are becoming more and more important, especially if blade mistuning is considered. The specific vibration behavior in these transition regions is characterized by a mix of both fundamental mode types into “coupled” modes. In this paper, numerical and experimental investigations based on a front high-pressure compressor (HPC) blisk stage were carried out in order to determine the effect of blade mistuning on those regions in detail. At this, effects like mode localization and amplitude magnification are found to be weakened in an integer frequency-veering zone. Contrary to this, blisks are very sensitive to mistuning in regions of pure blade-dominated mode families with high modal density. KW - Disks KW - Blades Y1 - 2013 U6 - https://doi.org/10.1115/1.4024022 SN - 1528-8900 VL - 135 IS - 6 SP - 061004-1 EP - 061004-7 ER - TY - GEN A1 - Gambitta, Marco A1 - Beirow, Bernd A1 - Klauke, Thomas T1 - Investigation of Rear Blisk Drum Dynamics Under Consideration of Multi-Stage Coupling T2 - ASME Journal of Engineering for Gas Turbines and Power N2 - The analysis of the structural dynamics of multistage cyclic structures as linked components is required to model the interstage coupling. In turbomachinery, this can result in a collaboration between different compressor or turbine stages. This paper investigates the coupling between two rear drum blade integrated disk stages of an axial compressor to support the mechanical design process. Considering the vibration modeshapes of a multistage system, different components may coparticipate in the dynamics. For this reason, criteria to identify the modes affected by the coupling and to quantify this coupling are defined. This allows to distinguish between modes with interstage coupling, requiring the multistage system for their description, and uncoupled modes, involving a single stage. In addition, it is of interest to research methods to reduce the impact of the coupling on the vibrating system without drastically altering the geometry of the components. The vibration analyses of a two-stage compressor generalized geometry, representative of a compressor rear drum blisk, are presented as a study case. The use of a reducing method allows to describe the behavior of the nominal multistage system with a computationally efficient technique, enabling a parametric analysis of the stages' coupling. The investigation considers the effect of a set of geometrical and mechanical parameters on the dynamics, identifying the driving parameters of the coupled vibration characteristics. Y1 - 2024 U6 - https://doi.org/10.1115/1.4063633 VL - 146 IS - 2 ER - TY - CHAP A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Golze, Mark A1 - Klauke, Thomas T1 - Experimentelle Untersuchungen des strukturdynamischen Verhaltens von Hochdruckverdichterschaufeln in Integralbauweise (Blisks) mittels Laser-Doppler-Vibrometrie KW - Blisks KW - Integralbauweise Y1 - 2004 ER - TY - THES A1 - Klauke, Thomas T1 - Schaufelschwingungen integraler, realer Verdichterräder im Hinblick auf Verstimmung und Lokalisierung KW - Schaufelschwingung KW - Verdichter KW - Flattern Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-4081 ER - TY - GEN A1 - Weber, Robby A1 - Kühhorn, Arnold A1 - Klauke, Thomas A1 - Schrape, Sven T1 - The Effect of Sand Erosion on a Compressor Blade and its Modal Properties T2 - Proceedings of ASME Turbo Expo 2020, Turbomachinery Technical Conference and Exposition, GT2020, September 21-25, 2020, Virtual, Online N2 - The wear and damage of High-Pressure Compressor (HPC) blades due to erosion or Foreign Object Damage (FOD) have a significant influence on HPC aerodynamic performance, vibration resistance against High-Cycle Fatigue (HCF) and thus component lifetime. The changes in airfoil geometry reduce the overall engine efficiency. Furthermore extended off-wing engine maintenances due to blade failures are increasing the cost of ownership. The safe operation of every engine within a reduced number of shop visits requires a reliable prediction of future deterioration. This enables the optimization of services and off-wing time. One contribution to this is a better understanding of the component’s dynamics and based on this providing an improved wear modeling to reliably predict the remaining lifetime and the decreased efficiency. This contribution determines the material removal of HPC blades due to sand erosion. Originally, this stage was built as a blisk (Blade Integrated Disk). After sand erosion test completion, the blisk was cut into segments containing one airfoil only. First, the material removal is determined for ten blades of one exemplary rotor. A blue light fringe projector is employed to identify the geometrical differences between the eroded blades and the nominal design. Second, realistic finite element models are generated to enable comparable modal analyses of eroded blades. This procedure suffers from unavoidable and mostly random imperfections due to the manufacturing process, which significantly affects the blade surface before the erosion test can be conducted. Therefore, an already published approach is implemented in the third step to predict the blade surface after erosion based on nominal blade design. The investigation is completed by comparing measured and predicted surfaces. Finally, the aforementioned tool is employed to predict the locations and intensities of the material losses and the accompanying change in modal properties of this compressor blade concerning operational time. Y1 - 2020 ER -