TY - GEN A1 - Morozova, Iuliia A1 - Kehm, Christian A1 - Obrosov, Aleksei A1 - Yang, Yitong A1 - Miah, Kamal Uddin Mohammad A1 - Uludintceva, Elena A1 - Fritzsche, Sebastian A1 - Weiß, Sabine A1 - Michailov, Vesselin T1 - On the Heat Treatment of Selective-Laser-Melted 316L T2 - Journal of Materials Engineering and Performance N2 - The effect of heat treatment at various temperatures (650, 850, 1050, and 1100°C) and dwell times (10 min and 1 h) on the metallurgical and microstructural evolution as well as on the related tensile properties of stainless steel 316L processed by selective laser melting (SLM) has been systematically evaluated. The metallurgical and microstructural features such as defects, stability of the columnar–cellular structure and substructure, second phase particles, and phase transformation imparted by SLM and heat treatment have been discussed. It has been shown that the processing conditions specific to SLM significantly alter the kinetics of phase evolution compared to standard welding techniques which affects the accuracy of the prediction. The influence of these characteristics on tensile properties and hardness was elucidated. It was disclosed that with increasing heat treatment temperature there was a gradual increase in elongation but a decrease in strength related to the dislocation density and the development of the microstructure. KW - 316L KW - grain structure KW - phase evolution KW - SLM KW - tensile properties Y1 - 2023 U6 - https://doi.org/10.1007/s11665-022-07404-0 SN - 1544-1024 VL - 32 (2023) IS - 10 SP - 4295 EP - 4305 ER - TY - GEN A1 - Miah, Kamal Uddin Mohammad A1 - Kloshek, Alexander A1 - González-Castaño, Miriam A1 - Kehm, Christian A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Herstellen hocheffektiver Mikroreaktoren durch selektives Laserstrahlschmelzen T2 - DVS Congress 2022, Große Schweißtechnische Tagung, DVS Campus ; Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 ; (Langfassungen der Beiträge auf USB-Karte) N2 - Das pulverbasierte 3D-Metalldrucken ermöglicht die Fertigung von hochkomplexen Integralbauteilen, die als Trägerstruktur für Mikroreaktoren benutzt werden. Nach einer Beschichtung der Struktur mit einem Katalysatormaterial, können diese Mikroreaktoren höchst effizient für die CO2-Methanisierung eingesetzt werden. Durch die additive Fertigung mit dem selektiven Laserstrahlschmelzen (SLM) wurden adaptierte dreidimensionale periodische Gitterstrukturen mit sehr geringen Wandstärken hergestellt. Diese weisen ein sehr günstiges Verhältnis von Oberfläche zu Volumen (TPMS - Triply periodic minimal surface) auf. Des Weiteren zeigen die TPMS-Strukturen vorteilhafte Strömungseigenschaften, die sowohl für die Beschichtung mit dem Katalysator-Material als auch die Durchströmung mit den Reaktionsmedien im Betrieb essentiell sind. So ist es beispielsweise möglich, durch die Variation der Dimension einer TPMS-Struktur die Oberfläche pro Volumeneinheit, den hydraulischen Durchmesser des Reaktors und somit auch den Transportprozess des Fluids deutlich zu verbessern. Diese Faktoren ermöglichen eine effektivere Gas-Katalysator-Reaktion. Im Vergleich zu Mikroreaktorstrukturen aus den traditionellen Herstellungsverfahren liefern die additiv gefertigten Strukturen sowohl eine höhere CO2-Umwandlungsrate als auch eine CH4-Selektivität innerhalb des diffusionskontrollierten Bereichs. Y1 - 2022 SN - 978-3-96144-189-1 SP - 708 EP - 713 PB - DVS Media GmbH CY - Düsseldorf ER - TY - GEN A1 - Kehm, Christian A1 - Wasilewski, Eric A1 - Miah, Kamal Uddin Mohammad A1 - Ossenbrink, Ralf A1 - Seidlitz, Holger T1 - Effects of extended shielding gas coverage on component contour accuracy in Wire Arc Additive Manufacturing T2 - 4th Symposium on Materials and Additive Manufacturing, Additive 2024, 22. - 24. Mai 2024, Book of Abstracts N2 - Producing near-net-shape components with Wire Arc Additive Manufacturing (WAAM) is a challenging task. Compared to laser-based additive manufacturing technologies, WAAM is characterized by a lower contour accuracy with higher surface roughness and more uneven surface profiles. Therefore, the WAAM requires a high degree of post-processing (machining) which reduces economic efficiency and increases material consumption. Therefore, topics such as process optimization with regard to the component contour are increasingly in the focus of research. This study presents the application of an extended shielding gas coverage in the WAAM process of steel to improve part contour accuracy. A specially adapted shielding gas coverage was manufactured with laser powder bed fusion and following used to study the influence on the resulting component contour and properties in comparison to standard shielding gas nozzles. The investigations include the analysis of temperature profiles, shape deviations, hardness and porosity in the component. In addition, process parameters such as gas flow rate and nozzle geometry were varied in order to evaluate their influence on the accuracy of the component contour. The extended shielding gas coverage reduces the average deviation from the target contour significantly by a degree of 49,44%. In addition, the maximum of the occurring deviation height could be decreased by 42,39%. The results show an improvement in the dimensional accuracy of the contour and the surface quality, resulting in higher reproducibility and less post-processing effort. Y1 - 2024 UR - https://acmit.at/wp-content/uploads/2024/08/Additive-2024_Book-of-abstracts.pdf SN - 978-3-88355-440-2 SP - 29 PB - Deutsche Gesellschaft für Materialkunde (DGM) e.V. CY - Bremen, Berlin ER -