TY - GEN A1 - Nikiruy, Kristina A1 - Pérez, Eduardo A1 - Baroni, Andrea A1 - Dorai Swamy Reddy, Keerthi A1 - Pechmann, Stefan A1 - Wenger, Christian A1 - Ziegler, Martin T1 - Blooming and pruning: learning from mistakes with memristive synapses T2 - Scientific Reports N2 - AbstractBlooming and pruning is one of the most important developmental mechanisms of the biological brain in the first years of life, enabling it to adapt its network structure to the demands of the environment. The mechanism is thought to be fundamental for the development of cognitive skills. Inspired by this, Chialvo and Bak proposed in 1999 a learning scheme that learns from mistakes by eliminating from the initial surplus of synaptic connections those that lead to an undesirable outcome. Here, this idea is implemented in a neuromorphic circuit scheme using CMOS integrated HfO2-based memristive devices. The implemented two-layer neural network learns in a self-organized manner without positive reinforcement and exploits the inherent variability of the memristive devices. This approach provides hardware, local, and energy-efficient learning. A combined experimental and simulation-based parameter study is presented to find the relevant system and device parameters leading to a compact and robust memristive neuromorphic circuit that can handle association tasks. KW - RRAM KW - Neural network Y1 - 2024 U6 - https://doi.org/10.1038/s41598-024-57660-4 SN - 2045-2322 VL - 14 IS - 1 ER - TY - GEN A1 - Dorai Swamy Reddy, Keerthi A1 - Pérez, Eduardo A1 - Baroni, Andrea A1 - Mahadevaiah, Mamathamba Kalishettyhalli A1 - Marschmeyer, Steffen A1 - Fraschke, Mirko A1 - Lisker, Marco A1 - Wenger, Christian A1 - Mai, Andreas T1 - Optimization of technology processes for enhanced CMOS-integrated 1T-1R RRAM device performance T2 - The European Physical Journal B N2 - Implementing artificial synapses that emulate the synaptic behavior observed in the brain is one of the most critical requirements for neuromorphic computing. Resistive random-access memories (RRAM) have been proposed as a candidate for artificial synaptic devices. For this applicability, RRAM device performance depends on the technology used to fabricate the metal–insulator–metal (MIM) stack and the technology chosen for the selector device. To analyze these dependencies, the integrated RRAM devices in a 4k-bit array are studied on a 200 mm wafer scale in this work. The RRAM devices are integrated into two different CMOS transistor technologies of IHP, namely 250 nm and 130 nm and the devices are compared in terms of their pristine state current. The devices in 130 nm technology have shown lower number of high pristine state current devices per die in comparison to the 250 nm technology. For the 130 nm technology, the forming voltage is reduced due to the decrease of HfO2 dielectric thickness from 8 nm to 5 nm. Additionally, 5% Al-doped 4 nm HfO2 dielectric displayed a similar reduction in forming voltage and a lower variation in the values. Finally, the multi-level switching between the dielectric layers in 250 nm and 130 nm technologies are compared, where 130 nm showed a more significant number of conductance levels of seven compared to only four levels observed in 250 nm technology. KW - RRAM Y1 - 2024 U6 - https://doi.org/10.1140/epjb/s10051-024-00821-1 SN - 1434-6028 VL - 97 PB - Springer Science and Business Media LLC ER - TY - GEN A1 - Perez-Bosch Quesada, Emilio A1 - Mistroni, Alberto A1 - Jia, Ruolan A1 - Dorai Swamy Reddy, Keerthi A1 - Reichmann, Felix A1 - Castan, Helena A1 - Dueñas, Salvador A1 - Wenger, Christian A1 - Perez, Eduardo T1 - Forming and resistive switching of HfO₂-based RRAM devices at cryogenic temperature T2 - IEEE Electron Device Letters N2 - Reliable data storage technologies able to operate at cryogenic temperatures are critical to implement scalable quantum computers and develop deep-space exploration systems, among other applications. Their scarce availability is pushing towards the development of emerging memories that can perform such storage in a non-volatile fashion. Resistive Random-Access Memories (RRAM) have demonstrated their switching capabilities down to 4K. However, their operability at lower temperatures still remain as a challenge. In this work, we demonstrate for the first time the forming and resistive switching capabilities of CMOS-compatible RRAM devices at 1.4K. The HfO2-based devices are deployed following an array of 1-transistor-1-resistor (1T1R) cells. Their switching performance at 1.4K was also tested in the multilevel-cell (MLC) approach, storing up to 4 resistance levels per cell. KW - RRAM Y1 - 2024 U6 - https://doi.org/10.1109/LED.2024.3485873 SN - 0741-3106 VL - 45 IS - 12 SP - 2391 EP - 2394 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - GEN A1 - Maldonado, David A1 - Cantudo, Antonio A1 - Swamy Reddy, Keerthi Dorai A1 - Pechmann, Stefan A1 - Uhlmann, Max A1 - Wenger, Christian A1 - Roldan, Juan Bautista A1 - Pérez, Eduardo T1 - Influence of stop and gate voltage on resistive switching of 1T1R HfO2-based memristors, a modeling and variability analysis T2 - Materials Science in Semiconductor Processing Y1 - 2024 U6 - https://doi.org/10.1016/j.mssp.2024.108726 SN - 1873-4081 SN - 1369-8001 VL - 182 ER - TY - GEN A1 - Vinuesa, Guillermo A1 - Garcia, Hector A1 - Duenas, Salvador A1 - Castan, Helena A1 - Iñiguez de la Torre, Ignacio A1 - Gonzalez, Tomas A1 - Dorai Swamy Reddy, Keerthi A1 - Uhlmann, Max A1 - Wenger, Christian A1 - Perez, Eduardo T1 - Effect of the temperature on the performance and dynamic behavior of HfO2-Based Rram Devices T2 - ECS Meeting Abstracts N2 - Over the past decades, the demand for semiconductor memory devices has been steadily increasing, and is currently experiencing an unprecedented boost due to the development and expansion of artificial intelligence. Among emerging high-density non-volatile memories, resistive random-access memory (RRAM) is one of the best recourses for all kind of applications, such as neuromorphic computing or hardware security [1]. Although many materials have been evaluated for RRAM development, some of them with excellent results, HfO2 is one of the established materials in CMOS domain due to its compatibility with standard materials and processes [2]. The main goal of this work is to study the switching capability and stability of HfO2-based RRAMs, as well as to explore their ability in the field of analogue applications, by analyzing the evolution of the resistance states that allow multilevel control. Indeed, analogue operation is a key point for achieving electronic neural synapses in neuromorphic systems, with synaptic weight information encoded in the different resistance states. This research has been carried out over a wide temperature range, between 40 and 340 K, as we are interested in testing the extent to which performance is maintained or modified, with a view to designing neuromorphic circuits that are also suitable in the low-temperature realm. We aim to prove that these simple, fast, high integration density structures can also be used in circuits designed for specific applications, such as aerospace systems. The RRAM devices studied in this work are TiN/Ti/8 nm-HfO2/TiN metal-insulator-metal (MIM) capacitors. Dielectric layers were atomic layer deposited (ALD). It has been demonstrated that the Ti coat in the top electrode acts as a scavenger that absorbs oxygen atoms from the HfO2 layer, and facilitates the creation of conductive filaments of oxygen vacancies [3]. In fact, the oxygen reservoir capability of Ti is well known, as it is able to attract and release oxygen atoms from or to the HfO2 layer during the RRAM operation [4]. The clustering of vacancies extends through the entire thickness of the oxide and, after an electroformig step, it joins the upper and lower electrodes and the device reaches the low resistance state (LRS). By applying adequate electrical signals, the filaments can be partially dissolved, which brings the device into the high-resistance state (HRS), with lower current values. The set process brings the device to the LRS state, while the reset one brings it to the HRS. The dependence of electrical conductivity on external applied electrical excitation allows triggering the device between the both states in a non-volatile manner [5]. The experimental equipment used consisted of a Keithley 4200-SCS semiconductor parameter analyzer and a Lake Shore cryogenic probe station. Fig.1 shows current-voltage cycles measured at different temperatures; the averages values at each temperature, both in logarithmic and linear scale, are also shown. The functional window increases as temperature decreases. The evolutions of set and reset voltage values with temperature are depicted in Fig.2, whereas the current values (measured at 0.1 V) corresponding to the LRS and HRS can be seen in Fig.3. LRS resistance decreases as temperature increases, in agreement with semiconductor behaviour, probably due to a hopping conduction mechanism. Both set and reset voltages decrease as temperature increases; the reset process is smoother at high temperatures. The reduction in reset voltage variability as temperature increases is very notable. Finally, Fig. 4 shows a picture of the transient behaviour; in the right panel of the same figure, the amplitudes of the current transients in the reset state have been included in the external loop. To sum up, the resistive switching phenomena is studied in a wide temperature range. The LRS shows semiconducting behavior with temperature, most likely related to a hopping conduction mechanism. Switching voltages decrease as temperature increases, with a notable reduction in reset voltage variability. An excellent control of intermediate resistance state is shown through current transients at several voltages in the reset process. REFERENCES [1] M. Asif et al., Materials Today Electronics 1, 100004 (2022). [2] S. Slesazeck et al., Nanotechnology 30, 352003 (2019). [3] Z. Fang et al., IEEE Electron Device Letters 35, 9, 912-914 (2014). [4] H. Y. Lee et al., IEEE Electron Device Letters 31, 1, 44-46 (2010). [5] D. J. Wouters et al., Proceedings of the IEEE 103, 8, 1274-1288 (2015). Figure 1 KW - RRAM Y1 - 2024 U6 - https://doi.org/10.1149/MA2024-01211297mtgabs SN - 2151-2043 VL - MA2024-01 IS - 21 SP - 1297 EP - 1297 PB - The Electrochemical Society ER - TY - GEN A1 - Maldonado, David A1 - Baroni, Andrea A1 - Aldana, Samuel A1 - Dorai Swamy Reddy, Keerthi A1 - Pechmann, Stefan A1 - Wenger, Christian A1 - Roldán, Juan Bautista A1 - Pérez, Eduardo T1 - Kinetic Monte Carlo simulation analysis of the conductance drift in Multilevel HfO2-based RRAM devices T2 - Nanoscale N2 - The drift characteristics of valence change memory (VCM) devices have been analyzed through both experimental analysis and 3D kinetic Monte Carlo (kMC) simulations. KW - RRAM Y1 - 2024 U6 - https://doi.org/10.1039/d4nr02975e SN - 2040-3364 VL - 16 IS - 40 SP - 19021 EP - 19033 PB - Royal Society of Chemistry (RSC) ER - TY - GEN A1 - Uhlmann, Max A1 - Krysik, Milosz A1 - Wen, Jianan A1 - Frohberg, Max A1 - Baroni, Andrea A1 - Reddy, Keerthi Dorai Swamy A1 - Pérez, Eduardo A1 - Ostrovskyy, Philip A1 - Piotrowski, Krzysztof A1 - Carta, Corrado A1 - Wenger, Christian A1 - Kahmen, Gerhard T1 - A compact one-transistor-multiple-RRAM characterization platform T2 - IEEE transactions on circuits and systems I : regular papers N2 - Emerging non-volatile memories (eNVMs) such as resistive random-access memory (RRAM) offer an alternative solution compared to standard CMOS technologies for implementation of in-memory computing (IMC) units used in artificial neural network (ANN) applications. Existing measurement equipment for device characterisation and programming of such eNVMs are usually bulky and expensive. In this work, we present a compact size characterization platform for RRAM devices, including a custom programming unit IC that occupies less than 1 mm2 of silicon area. Our platform is capable of testing one-transistor-one-RRAM (1T1R) as well as one-transistor-multiple-RRAM (1TNR) cells. Thus, to the best knowledge of the authors, this is the first demonstration of an integrated programming interface for 1TNR cells. The 1T2R IMC cells were fabricated in the IHP’s 130 nm BiCMOS technology and, in combination with other parts of the platform, are able to provide more synaptic weight resolution for ANN model applications while simultaneously decreasing the energy consumption by 50 %. The platform can generate programming voltage pulses with a 3.3 mV accuracy. Using the incremental step pulse with verify algorithm (ISPVA) we achieve 5 non-overlapping resistive states per 1T1R device. Based on those 1T1R base states we measure 15 resulting state combinations in the 1T2R cells. KW - RRAM KW - Vector Matrix Multiplication Y1 - 2025 U6 - https://doi.org/10.1109/TCSI.2025.3555234 SN - 1549-8328 SP - 1 EP - 12 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - New York ER - TY - GEN A1 - Baroni, Andrea A1 - Pérez, Eduardo A1 - Reddy, Keerthi Dorai Swamy A1 - Pechmann, Stefan A1 - Wenger, Christian A1 - Ielmini, Daniele A1 - Zambelli, Cristian T1 - Enhancing RRAM reliability : exploring the effects of Al doping on HfO2-based devices T2 - IEEE transactions on device and materials reliability N2 - This study provides a comprehensive evaluation of RRAM devices based on HfO2 and Al-doped HfO2 insulators, focusing on critical performance metrics, including Forming yield, Post-Programming Stability (PPS), Fast Drift, Endurance, and Retention at elevated temperatures (125 ∘C). Aluminum doping significantly enhances device reliability and stability, improving Forming yield, reducing current drift during programming and Retention tests, and minimizing variability during Endurance cycling. While Al5%:HfO2 achieves most of the observed benefits compared to pure HfO2, Al7%:HfO2 offers incremental advantages for scenarios requiring extreme reliability. These findings position Al-doped HfO2 devices as a promising solution for RRAM-based systems in memory and neuromorphic computing, highlighting the potential trade-off between performance gains and increased fabrication complexity. This work underlines the importance of material engineering for optimizing RRAM devices in application-specific contexts. KW - RRAM KW - Memristive device Y1 - 2025 U6 - https://doi.org/10.1109/TDMR.2025.3581061 SN - 1530-4388 SN - 1558-2574 SP - 1 EP - 9 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - New York ER - TY - GEN A1 - Perez, Eduardo A1 - Maldonado, David A1 - Pechmann, Stefan A1 - Reddy, Keerthi Dorai Swamy A1 - Uhlmann, Max A1 - Hagelauer, Amelie A1 - Roldan, Juan Bautista A1 - Wenger, Christian T1 - Impact of the series resistance on switching characteristics of 1T1R HfO₂-based RRAM devices T2 - 2025 15th Spanish Conference on Electron Devices (CDE) N2 - This study investigates the influence of the series resistance (RS) on the switching characteristics of 1-transistor-1-resistor (1T1R) RRAM devices based on HfO2 and Al:HfO₂ dielectrics. Intrinsic RS values were extracted from I-V characteristics measured over 50 Reset-Set cycles at various gate voltages (VG) by using a numerical transformation method. Results reveal the contribution of the transistor’s resistance to the overall RS. A linear relationship between RS values and Set transition voltages (VTS) was found, with larger RS values amplifying the variability in switching parameters. Comparative analysis of cumulative distribution functions (CDFs) highlights differences between technologies, showing lower VTS values as well as lower sensitivity to RS for Al:HfO₂-based devices. These findings underscore the critical role of RS in modeling and optimizing the performance of RRAM devices for reliable operation. KW - RRAM KW - Memristive device Y1 - 2025 SN - 979-8-3315-9618-7 U6 - https://doi.org/10.1109/CDE66381.2025.11038868 SP - 1 EP - 4 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - Piscataway, NJ ER -