TY - GEN A1 - Worlitz, Jane A1 - Woll, Ralf T1 - Lernen durch Lehren mit Video-Tutorials Y1 - 2015 UR - https://www.vdi.de/bildung/qualitaetsdialoge/5-qualitaetsdialog-studienerfolg-verbessern/posterausstellung/ N1 - 5. Qualitätsdialog - Studienerfolg verbessern PB - VDI ER - TY - GEN A1 - Worlitz, Jane A1 - Woll, Ralf T1 - Auf Format gebracht - Six Sigma für Kleinunternehmen T2 - Qualität und Zuverlässigkeit Y1 - 2015 SN - 0720-1214 VL - 60 IS - 11 SP - 24 EP - 25 ER - TY - GEN A1 - Worlitz, Jane A1 - Stabler, Anne A1 - Peplowsky, Stefan A1 - Woll, Ralf T1 - Video Tutorials: An Appropriate Way of Teaching QM Tools Applied with Software T2 - Quality Innovation Prosperity N2 - Purpose: The aim of this research is to verify the applicability of video tutorials for the improvement of software skills. Methodology/Approach: Video tutorial prototypes were created according to design criteria found in literature and tested as teaching material of selforganized/self-regulated learning. 65 students were parted in two groups and asked to work on an assignment concerning the use of quality tools in Microsoft Excel. One group used video tutorials and the other group was guided by a teacher. Before and after the assignment the students were asked to fill out a survey evaluating their software skills as well as the aid used during the test. Findings: The results of the survey do not show a significant difference between the evaluation of video tutorials and guidance of the teacher. Also the performance of both groups concerning the assignment was comparable. From these findings it can be concluded that video tutorials and classroom teaching are equal ways of teaching in the investigated field. Research Limitation/implication: The suitability of video tutorials for the application of quality-tools with the use of appropriate software has been confirmed. The results do not show conclusions about the extent to which video tutorials can be suitable for the mediation of complex issues. Follow-up studies are required for this purpose. Originality/Value of paper: The study demonstrates that video tutorials, as a form of self-organized/self-regulated learning, are suitable to improve skills in applying quality tools by using software. KW - video tutorial KW - education KW - knowledge transfer KW - quality tools KW - software Y1 - 2016 UR - http://www.qip-journal.eu/index.php/QIP/article/view/754 U6 - https://doi.org/10.12776/qip.v20i2.754 SN - 1335-1745 SN - 1338-984X VL - 20 IS - 2 SP - 169 EP - 184 ER - TY - GEN A1 - Rich, Beatrice Monique A1 - Worlitz, Jane A1 - Goldmann, Christine A1 - Schulze, Mathias A1 - Kazula, Stefan A1 - Woll, Ralf T1 - Preparing STEM Students for Leading Positions through Supervising Younger Students T2 - 2018 International Conference on Teaching, Assessment, and Learning for Engineering (TALE), 4-7 December 2018, Wollongong, NSW, Australia N2 - Social and leadership skills are often neglected during studies (especially in STEM subjects). It is precisely these skills that are urgently needed in professional life. The CoMeT “Concepts, Methods and Techniques for Project Management” module was developed to meet the need to acquire social and leadership skills. After a preliminary consideration an overview of the module is given. First, the teaching and learning concept is presented and insights into the seminar work are given. In addition to the competence-oriented examination methods, the integration of digital elements are presented. The continuous further development of the module, adapted to the needs of students and the economy, is a constant goal of the teachers. For this reason, there are already transmission possibilities of the module in planning. Instead of instructing groups of students in project work, pupils are to be introduced to science and study through small projects. Y1 - 2018 UR - https://ieeexplore.ieee.org/document/8615359 SN - 978-1-5386-6522-0 U6 - https://doi.org/10.1109/TALE.2018.8615359 SP - 835 EP - 839 PB - IEEE CY - Piscataway, NJ ER - TY - GEN A1 - Worlitz, Jane A1 - Kotal, Janina A1 - Woll, Ralf ED - Schmitt, Robert H. T1 - Die Bereitstellung von Warteinformationen über digitale Anzeigetafeln und ihr Einfluss auf die Kundenzufriedenheit am Beispiel der stationären Aufnahme in einem Krankenhaus T2 - Potenziale Künstlicher Intelligenz für die Qualitätswissenschaft : Bericht zur GQW-Jahrestagung 2018 in Nürnberg N2 - Untersuchungsziel: Immer mehr digitale Anwendungen helfen Dienstleistungsunternehmen, den Service für ihre Kunden zu verbessern. Durch Echtzeit-Informationen, bereitgestellt über digitale Anzeigetafeln oder Apps, sind Kunden und Kundinnen über Vorgänge informiert. In Wartesituationen können über digitale Anzeigetafeln allgemeine Informationen, Warteposition, Wartedauer und Wartegrund kommuniziert werden. Diese Studie untersucht, welchen Einfluss die Bereitstellung von Warteinformationen auf die Wartezufriedenheit der Kunden hat und wie diese bereitgestellt werden sollten. Methode: Zur Untersuchung der Forschungsfrage wird ein Versuch in der stationären Aufnahme von Patientinnen und Patienten eines Krankenhauses durchgeführt. An zwei Versuchstagen vor, und zwei Versuchstagen nach der Einführung einer digitalen Anzeigetafel mit Warteinformationen werden Patientinnen und Patienten im Wartebereich mittels einer schriftlichen Befragung zu ihrer Wartezufriedenheit befragt. Ergebnisse und Implikationen: Aus wirtschaftlichen Gründen ist eine Wartezeit von null Minuten nicht immer geeignet. Statt die Reduzierung von Wartezeit zu betrachten, untersucht diese Studie, wie das Warten angenehm gestaltet werden kann. Untersuchungen zeigen, dass Warteinformationen die Wartezufriedenheit beeinflussen. Diese Studie zeigt am Beispiel der stationären Aufnahme eines Krankenhauses, dass die Art der Bereitstellung von Warteinformationen bedeutsam ist. Bei der Bereitstellung sollte darauf geachtet werden, dass die Präsentation der Warteinformationen nicht zur visuellen und akustischen Überforderungen der Kunden führt. Limitationen: Es wurde die Wartephase vor der Erstellung der Dienstleistung betrachtet. Die Untersuchungen sollten für andere Wartephasen und Branchen wiederholt werden. Folgeuntersuchungen sind erforderlich. Wert der Arbeit: Die Zufriedenheit der Kunden mit der Wartezeit beeinflusst die Gesamtbeurteilung der Dienstleistung. Die Studie zeigt, wie Warteinformationen die Kundenzufriedenheit steigern. Die Ergebnisse leisten einen Beitrag zur Steigerung der Wartezufriedenheit des Kunden und zur langfristigen Kundenbindung. KW - Wartezufriedenheit KW - Warteinformationen KW - wahrgenommene Wartezeit KW - akzeptable Wartezeit Y1 - 2019 SN - 978-3-662-60692-6 SN - 978-3-662-60691-9 SP - 17 EP - 38 PB - Springer Verlag CY - Berlin ER - TY - GEN A1 - Worlitz, Jane A1 - Vu, Duy Linh A1 - Hettling, Laura A1 - Woll, Ralf T1 - Perceived Waiting Time and Waiting Satisfaction: a Systematic Literature Review T2 - Proceedings, 22st QMOD-ICQSS Conference in Krakau, 2019 N2 - Purpose: The waiting time of the customer has an impact on the quality evaluation of services. Therefore, strategies to reduce waiting time are required. In addition to strategies to reduce actual waiting time, strategies to reduce the perceived waiting time are investigated. Several factors influencing perceived waiting time and waiting satisfaction of customers. The purpose of the following research is to capture the current state of perceived waiting time and waiting satisfaction through a systematic literature review. Design/methodology/approach: Among other, the paper will answer the following questions. “In which industries are perceived waiting time and waiting satisfaction particularly frequently investigated?” “How does the interest of the topic change over time?” “Which factors influence perceived waiting time and customer waiting satisfaction?” The work presented in this paper is based on a systematic literature review of 152 empirical studies that were published on perceived waiting time and waiting satisfaction in academic databases from 1984 to 2018. Findings: Pre-process waiting is the waiting period before the service is provided. Pre-process waiting is considered in a large number of studies. The majority of the studies relate to the health sector. Mostly surveys were based on questionnaires. 121 different characteristics of factors were identified in the studies. Originality/Value of paper: Research results on the topic of perceived waiting time and waiting satisfaction were structured and presented thematically, by a systematic literature analysis. This provides the basis for further developments in the subject area. The results enable new ways to apply strategies to reducing perceived waiting time and increasing waiting satisfaction. KW - acceptable waiting time; customer satisfaction; positive waiting; service quality; waiting satisfaction; waiting time Y1 - 2019 UR - https://www.researchgate.net/publication/338336943_Perceived_Waiting_Time_and_Waiting_Satisfaction_a_Systematic_Literature_Review ER - TY - GEN A1 - Wirsig, Madlen A1 - Worlitz, Jane A1 - Woll, Ralf T1 - Entwicklung des Qualitätsmanagements in Brandenburg T2 - Qualitätskollegium Berlin-Brandenburg 2019 N2 - Das Ziel dieser Arbeit besteht darin, die Entwicklung des Qualitätsmanagements in Bran-denburger Unternehmen aufzuzeigen (Betrachtungszeitraum 2015-2019). Zu diesem Zweck wird der aktuelle Stand des Qualitätsmanagements in Brandenburger Unternehmen erfasst und mit Daten aus 2015 verglichen. Das Six Sigma Konzept erreicht im Brandenburger Land einen immer größer werdenden Bekanntheitsgrad unter den Unternehmensführenden und Quali-tätsmanagementbeauftragten, aber es kommt nur kaum bis gar nicht zur Anwendung. Die Umfragen lassen den Schluss zu, dass die meisten Unternehmen eher reine Qualitätsprüfungs- und einfache Qualitätslenkungskonzepte einsetzen. Aus technischer Sicht spielt die Digitalisierung dabei eine Rolle. Y1 - 2019 UR - https://www.researchgate.net/publication/338337123_Entwicklung_des_Qualitatsmanagements_in_Brandenburg CY - Berlin ER - TY - CHAP A1 - Worlitz, Jane A1 - Peplowsky, Stefan A1 - Woll, Ralf ED - Dahlgaard-Park, Su Mi ED - Dahlgaard, Jens Jörn T1 - Practical Guide to Project Groups, Presentation of the KoMet teaching concept T2 - 17th QMOD-ICQSS Conference, Prague, Czech Republic: Entering the Experience Economy – from product quality to experience quality Y1 - 2014 SN - 978-91-7623-086-2 PB - Lund University Library Press CY - Lund ER - TY - CHAP A1 - Worlitz, Jane A1 - Reichl, Sebastian A1 - Woll, Ralf T1 - How long are you ready to wait? - How our experience influences our expectation T2 - Proceedings, 21st QMOD-ICQSS Conference in Cardiff, 2018 N2 - Purpose: Customers are willing to wait for services. But how long? When are customers satisfied or dissatisfied with the waiting time and how should companies organize their waiting times? How do waiting experiences influence expectations and satisfactions? According to the assumptions of the expectation disconfirmation theory, customer satisfaction arises when the expectations of the service are fulfilled or exceeded. The aim of this study is to examine whether waiting experiences influence expectations and thus customer satisfaction. A further objective is to investigate the relationship between waiting experiences and acceptable waiting time. Methodology/Approach: 57 students of a course of the Brandenburg University of Technology took part in a 2-day trial. The actual purpose of the trial was not disclosed. Instead, students were given appointments to evaluate the quality of vehicle surfaces. After arriving to their appointments, they either waited 0 minutes, 5 minutes or 20 minutes alone in a room. On the second day, they waited the same length, longer or shorter under the same conditions. Students answered a questionnaire about their waiting satisfaction right after their waiting period. Supplementary questions distracted them from the actual aim of the questionnaire. Finally, the students evaluated the quality of vehicle surfaces on both days. The specified waiting times of 0 minutes, 5 minutes and 20 minutes were defined by the results of a pretest. The course was asked about its satisfaction with different waiting times. The times represent the transitions from very satisfied (0 minutes) with the waiting time, to satisfied (from 5 minutes) to dissatisfied (20 minutes). Findings: It can be stated that an acceptable waiting time describes a time which causes neither satisfaction, nor dissatisfaction. Already experienced waiting time affects expectations of a future waiting situation. Students who repeatedly waited 20 minutes were less dissatisfied with the waiting time than students who previously waited 0 or 5 minutes. Implication/Research Limitation: It is recommended to keep the waiting time constant. Strong variations in waiting time leads to particularly strong dissatisfaction of the customers and this can lead to avoiding the company. The study does not deal with strategies to reduce waiting time. For economic reasons, a target value of 0 minutes is not always useful. The acceptable waiting time can be used to determine the targeted waiting time. In addition, other factors such as the competitive situation should be taken into account. The results are based on an experiment. Therefore, the examination should be repeated in different waiting environments. Follow-up studies are required. Originality/Value of paper: The satisfaction of the customers regarding the waiting time is very important in order to bind customers to their company on a long-term basis. On the one hand the study gives advices for the organization of waiting times. On the other hand, the study gives an approach for the record of target values for waiting times. By using these advices, service companies can increase the waiting satisfaction of their customers and increase the long-term customer loyalty. KW - waiting satisfaction KW - waiting time KW - acceptable waiting time KW - customer satisfaction KW - service quality KW - positive waiting Y1 - 2018 UR - https://www.researchgate.net/publication/330542324_How_long_are_you_ready_to_wait_-_How_our_experience_influences_our_expectation ER - TY - CHAP A1 - Worlitz, Jane A1 - Branke, Marcus A1 - Troike, Marie A1 - Hettling, Laura A1 - Woll, Ralf T1 - The Contribution of Learning, Teaching and Assessment Activities to the Development of 21st Century STEM Competencies T2 - 2018 International Conference on Teaching, Assessment, and Learning for Engineering (TALE), 4-7 December 2018, Wollongong, NSW, Australia N2 - The aim of this research is to identify how learning, teaching and assessment activities promote the acquisition of Science, Technology, Engineering and Mathematics (STEM) competencies. Students of a statistical course were asked to evaluate the contribution of various learning, teaching and assessment activities to STEM relevant work activities. The course activities lecture, flipped classroom, project work, experiments, laboratory exercises and assessments are suitable to prepare for selected work activities. A mix of activities should be used. KW - STEM competencies KW - flipped classroom KW - project-based learning KW - video tutorials KW - eLearning KW - learning environment Y1 - 2018 UR - https://ieeexplore.ieee.org/document/8615320 SN - 978-1-5386-6522-0 U6 - https://doi.org/10.1109/TALE.2018.8615320 SP - 316 EP - 321 PB - IEEE CY - Piscataway, NJ ER -