TY - GEN A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Carbon-plot-microstructuring for all-polymer-transistors T2 - Synthetic Metals N2 - This contribution describes the use of a low-cost technology to produce organic microstructures for electronically applications. With a computer driven plotter, substrates like printing foil and colloidal graphite (diluted in water) for the electrodes, we realised channel lengths of 20±10 microm. Compared with transistor devices, fabricated using conventional photolithographic methods and the same semiconducting material, this technique is a hopeful approach to produce microelectronic structures that are low-cost and all-organic. KW - Ten micrometer carbon-plot KW - Organic field-effect-transistors KW - Low-cost-technique Y1 - 2003 SN - 0379-6779 VL - 138 IS - 1-2 SP - 271 EP - 273 ER - TY - JOUR A1 - Paloumpa, Ioanna A1 - Yfantis, Alexandros D. A1 - Hoffmann, Patrick A1 - Burkov, Yevgen A1 - Yfantis, Alexandros D. A1 - Schmeißer, Dieter T1 - Mechanisms to inhibit corrosion of Al alloys by polymeric conversion coatings N2 - We introduce a recently developed novel polypyrrole-based coating, which can be formed on the aluminium surface from an aqueous pyrrole solution of fluorozirconic and fluorotitanic acid neutralised with zinc oxide. The composite layer consists of polypyrrole (Ppy) chemisorbed on titanium and zinc oxides and exhibits advanced corrosion resistance. For the investigation of the structure and the corrosion mechanism of the composite corrosion resistant layer we use a photo-electron emission microscope (PEEM). PEEM is especially suitable because it can deliver topographic contrast as well as elemental contrast and chemical information in connection with a variable X-ray source. Additionally, in order to investigate further the corrosion mechanism, but also the role of the alloy in the corrosion process, we examine the aluminium samples with SEM/EDX. The structure of the corrosion resistant layer was investigated before and after accelerated corrosion tests. Our results pointed out the important role of titanium oxide and zinc in the corrosion resistance of our Ppy coating on aluminium. KW - Polypyrrole KW - Fluorozirconates KW - Fluorotitanates KW - Aluminium KW - Corrosion Y1 - 2004 ER - TY - GEN A1 - Yfantis, Alexandros D. A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter ED - Kainer, Karl Ulrich T1 - Corrosion Protection by Conductive Polymers for Magnesium Alloys T2 - Magnesium, proceedings of the 6th International Conference on Magnesium Alloys and their Applications, November 2003 in Wolfsburg N2 - In this work, we present the experimental data related to the effect of the polypyrrole concentration and the film thickness on the corrosion inhibition properties of these novel polymer coatings. The relative corrosion resistance properties of the films formed from the matrix solutions, where polypyrrole was in situ polymerized and in cases where polypyrrole is dispersed in a form of powder (pigment) in the polyaclylic polymer, are further examined. The evaluation of the experimental data provides significant evidence regarding the mechanism of corrosion inhibition, as well as the optimization of the synthesis and application conditions. KW - corrosion protection KW - conductive polymers for magnesium alloys KW - polypyrrole Y1 - 2004 SN - 3-527-30975-6 SP - 605 EP - 610 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Goryachko, Andriy A1 - Paloumpa, Ioanna A1 - Beuckert, Guido A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - The Interaction of Pr2O3 with 4H-SiC(0001)surface JF - Physica status solidi / C N2 - Praseodymium oxide (Pr2O3) as a hetero-oxide on SiC(0001) represents a promising semiconductor / high-K dielectric material combination. We prepared thin films (<3 nm) of Pr2O3 on 4H-SiC(0001) surfaces by a wet chemical process involving aqueous solutions of Pr(NO3)3. Synchrotron radiation photoelectron spectroscopy (SR-PES) is used to study the chemical composition of these films after deposition and annealing in 300-900 %B0C range. The Si2p and C1s core level emissions are analysed in detail and reveal that praseodymium-silicate is formed at the interface. Our data are compared to corresponding studies of the Pr2O3 interaction with Si(001) surfaces. Y1 - 2004 SN - 1610-1634 VL - 1 IS - 2 SP - 265 EP - 268 ER - TY - GEN A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - A polymer high-k dielectric insulator for organic field effect Transistors T2 - Journal of Applied Physics Y1 - 2005 SN - 0021-8979 VL - 98 IS - 5 SP - S. 056104 ER - TY - GEN A1 - Henkel, Karsten A1 - Sohal, Rakesh A1 - Torche, Mohamed A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Grenzflächenoptimierung für funktionale Dünnschichtsysteme: Oxide und Polymere T2 - Forum der Forschung Y1 - 2005 SN - 0947-6989 VL - 9 IS - 18 SP - 49 EP - 56 ER - TY - JOUR A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter A1 - Henkel, Karsten T1 - Organic thin film transistors with polymer high-k dielectric insulator KW - high-k Y1 - 2006 ER - TY - JOUR A1 - Schmeißer, Dieter A1 - Burkov, Yevgen A1 - Paloumpa, Ioanna A1 - Mandal, Dipankar A1 - Henkel, Karsten T1 - Microscopic and Spectroscopic Characterization of Interfaces and Dielectric Layers for OFET Devices Y1 - 2008 ER - TY - GEN A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Spin coated organic ferroelectric films for non volatile memories KW - organic KW - ferroelectric Y1 - 2011 ER - TY - GEN A1 - Henkel, Karsten A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Buffer layer incestigaions on MFIS capacitors consisting of ferroelectric poly[vinylidene fluoride trifluoroethylene] T2 - IOP conference series : Materials Science and Engineering KW - MFIS capacitors KW - ferroelectric Y1 - 2010 SN - 1757-899X VL - 8 IS - 1 SP - 012036 ER - TY - CHAP A1 - Müller, Klaus A1 - Burkov, Yevgen A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Goryachko, Andriy A1 - Schmeißer, Dieter ED - Wöll, Christof T1 - Microscopic and spectroscopic characterization of interfaces and dielectric layers for OFET devices T2 - Organic Electronics : structural and Electronic Properties of OFETs KW - microscopic KW - spectrocsopic KW - dielectric Y1 - 2009 SN - 978-3-527-40810-8 SP - 445 EP - 468 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Henkel, Karsten A1 - Lazareva, I. A1 - Mandal, Dipankar A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Koval, Yuri A1 - Müller, P. A1 - Schmeißer, Dieter T1 - Electrical investigations on metal/ferroelectric/insulator/semiconductor structures using Poly[vinylidene fluoride trifluoroethylene] as ferroelectric layer for organic nonvolatile memory applications KW - metal KW - frerroelectric KW - insulator KW - semiconductor Y1 - 2009 ER - TY - JOUR A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Ferroelectric properties of spin-coated ultrathin (down to 10nm) copolymer films KW - ferroelectric KW - spin-coated KW - copolymer Y1 - 2008 ER - TY - CHAP A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Lazareva, I. A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Electrical investigations on MFIS structures consisting P[VDF/TrFE] as ferro-electric layer for non-volatile memory applications T2 - Proceedings of 15th Workshop on Dielectrics in Microelectronics, Bad Saarow, 23 - 25 June 2008, Bad Saarow (Berlin) KW - MFIS, P[VDF/TrFE] KW - ferroelectric KW - non-volatile Y1 - 2008 SP - 159 EP - 160 ER - TY - GEN A1 - Henkel, Karsten A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Optimization of MFIS structures containing poly(vinylidene-fluoride trifluoroethylene) for non-volatile memory applications Y1 - 2010 ER - TY - GEN A1 - Henkel, Karsten A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Buffer layer investigations on MFIS capacitors consisting of ferroelectric poly[vinylidene fluoride trifluoroethylene] Y1 - 2010 ER - TY - CHAP A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Carbon-Plot-Micostructuring for All-Polymer-Transistors Y1 - 2001 ER - TY - CHAP A1 - Yfantis, Alexandros D. A1 - Bourdas, N. A1 - Lambrakopoulos, S. A1 - Yfantis, N. A1 - Paloumpa, Ioanna A1 - Yfantis, Alexandros D. T1 - Conductive polymers precoats-application on metallisation of ABS Y1 - 2003 ER - TY - CHAP A1 - Yfantis, Alexandros D. A1 - Bourdas, N. A1 - Lambrakopoulos, S. A1 - Yfantis, N. A1 - Paloumpa, Ioanna A1 - Yfantis, Alexandros D. T1 - Primers of conductive polymers-application in powder coatings technology Y1 - 2003 ER - TY - CHAP A1 - Yfantis, Alexandros D. A1 - Bourdas, N. A1 - Yfantis, N. A1 - Yfantis, Alexandros D. A1 - Lambrakopoulos, S. A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - A study of anticorrosive conversion coatings based on conductive polymers of pyrrole Y1 - 2002 ER - TY - RPRT A1 - Schwiertz, Carola A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter A1 - Kamieth, P. A1 - Schnegber, P. T1 - Aufbau eines Sensorarrays zur Detektion von umwelt- und tierphysiologisch relevanten Komponenten Y1 - 2001 ER - TY - RPRT A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schwiertz, D. A1 - Schmeißer, Dieter A1 - Kamieth, P. A1 - Schengber, P. T1 - Gezielte Entwicklung von Sensormaterialien und Sensoren zur spezifischen Detektion von schwefel- und stickstoffhaltigen Stoffgruppen Y1 - 2001 ER - TY - JOUR A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schwiertz, B. A1 - Elling, B. A1 - Danz, R. A1 - Büchtemann, A. A1 - Straube, Oliver A1 - Schmeißer, Dieter T1 - Kraftsensoren aus Polymerfolien-Piezoelektrische Polymersensoren für Hochdruckanwendungen Y1 - 2001 ER -