TY - JOUR A1 - Yfantis, Alexandros D. A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter A1 - Yfantis, Alexandros D. T1 - Novel corrosion-resistant films for Mg alloys N2 - A novel method for the corrosion inhibition of Mg, alloys, based on the formation of a thin polyacrylic-polypyrrole film, is presented. The film was created after simpleimmersion of the samples in a specially formulated emulsion of polyacrylic and polypyrrole polymers. The synthesis conditions were studied, as well as the resultingcorrosion resistance of coated magnesium foils (AZ31) in terms of corrosion rate in neutral aqueous NaCl solutions. The relative ratio of polyacrylic polymer topolypyrrole was found to be important for the film properties. Furthermore, only in situ polymerisation of pyrrole in the polyacrylic emulsion can provide advancedcorrosion proper-ties in relatively thin films (2-5 mum). Blending of polypyrrole powder with the polyacrylic emulsion gives rise to thick films (20 mum) with reducedcorrosion-inhibition properties. The corrosion rate was only weakly dependent on the film thickness of these novel coatings. We argue that the mechanism of corrosioninhibition is related to the formation of a thin passive layer of chemisorbed polypyrrole polymers or oligomers on the native magnesium oxide of the C surface. Thestructure is further stabilised by polyacrylic polymer chains interacting as dopants of polypyrrole. The method is environmentally friendly: non-toxic chemicals are used,no rinsing is required, etc. The advanced corrosion-inhibition properties of the films. as well as the simple application process on the metal surface, provide significantpotential for the industrial application of the method. KW - polypyrrole KW - polyacrylic KW - coating KW - magnesium KW - corrosion inhibition Y1 - 2002 ER - TY - GEN A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Mikalo, Ricardo Pablo A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Elektronik mit organischen Materialien N2 - Plastikelektronik, flexible Solarzellen, intelligente Kleidung, neuartige und maßgeschneiderte Transducer für die Gas-, Flüssigkeits- und Biosensorik, all dies sind Anwendungen, die ohne halbleitende Polymere nicht denkbar wären und die Bereiche erschließen, in denen zur Zeit eine regelrechte Goldgräberstimmung herrscht. Mit wichtigen Beiträgen im Grundlagen- und Anwendungsbereich nimmt die BTU Cottbus an dieser Entwicklung teil, u. a. auch durch eine Kooperation mit dem Institut für Mikrobiologie des Carl-Thiem-Klinikums Cottbus.In diesem Artikel werden die Voraussetzungen für die Konstruktion organischer Feldeffekt-Transistoren mit gassensitiver Gate-Elektrode vorgestellt. Untersuchungen zur elektronischen Struktur des organischen Halbleiters Poly(3-Hexylthiophen), die Anwendung dieses Materials als aktive Schicht in organischen Feldeffekt-Transitoren, die Gassensitivität von Polypyrrolelektroden auf Quarz-Mikrowaagen und die Mikrorstukturierung organischer Elektroden werden beschrieben. Y1 - 2002 PB - BTU Cottbus, Eigenverlag ER - TY - CHAP A1 - Schwiertz, Carola A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Sensorsystem zur Unterscheidung von Geruchsmustern in Tierställen N2 - Es wurde ein kontinuierlich arbeitendes, preiswertes Schwingquarz-Mess-System zur olfaktometrischen Überwachung von Tierställen aufgebaut, mit dessen Hilfe im Arbeitsbereich von 65%B0C spezifische Gerüche verschiedener Tierarten unterschieden werden können. Zur Geruchsmustererkennung wurde ein einfaches neuronales Netz verwendet. Olfaktometrische Verdünnungen auf 33% sowie Messwertschwankungen von 5-10% wurden simuliert, wobei die richtige Musterzuordnung durch das Netz nicht beeinflusst wurde. Y1 - 2002 ER - TY - CHAP A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Low-cost-Plot-Technologie fur die Mikrostrukturierung von Gassensoren T2 - Sensoren im Fokus neuer Anwendungen, 5. Dresdner Sensor-Symposium, 10. - 12. Dezember 2001, Dresden N2 - Bei der Herstellung von Mikrosensoren ist die Strukturierung von Elektroden oder elektrischen Zu-leitungen mit einem hohen Miniaturisierungsgrad ein entscheidender Punkt. Dazu müs-sen häufig teure Verfahren (Lithographie, Maskentechniken) herangezogen werden.Dieser Beitrag beschreibt eine low-cost-Technologie zur Herstellung organischer Mikrostrukturen für elektronische und messtechnische Anwendungen im Bereich der Sensorik. Geplottete Strukturen mit Polypyrrol und Poly(3,4-Ethylen-Dioxy-Thiophen), dotiert mit Polystyrolsulfonat (PEDOT/PSS) wurden als Widerstandssensoren für die Detektion von Luftfeuchte ein-gesetzt. Die prinzipielle Ein-satzmöglichkeit unserer Technik im Bereich der organischen Elektronik konnten wir mit dem Bau organischer Feldeffekttransistoren nachweisen. Mit einem computergesteu-erten Plotter des Typs Rol-land DXY-1150A, Plot-Kapillaren für das Tuschezeichnen, handelsüblichen Folien für wasserlösliche Tinten als Substrat und kolloidalen Graphit als leitendes Material konnten wir Auflösungen, das heißt insbesondere Kanalbreiten bzw. Elektrodenabstände im Bereich von 20+10%B5m (auf 2cm Länge) her-stellen. Y1 - 2002 SN - 3-935712-71-5 SP - 166 EP - 169 PB - w.e.b. Universitätsverlag CY - Dresden ER - TY - GEN A1 - Henkel, Karsten A1 - Oprea, A. A1 - Paloumpa, Ioanna A1 - Appel, Günter A1 - Schmeißer, Dieter A1 - Kamieth, P. T1 - Selective polypyrrole electrodes for quartz microbalances : NO2 and gas flux sensitivities T2 - Sensors and Actuators : B, Chemical 76(2001)1-3 Y1 - 2001 SN - 0925-4005 VL - 76 IS - 1-3 SP - 124 EP - 129 ER - TY - CHAP A1 - Henkel, Karsten A1 - Elling, B. A1 - Danz, R. A1 - Büchtemann, A. A1 - Straube, Oliver A1 - Paloumpa, Ioanna A1 - Yfantis, Alexandros D. A1 - Schmeißer, Dieter T1 - Piezoelectric polymer sensor for high pressures in forming machines Y1 - 2001 UR - http://www.materialsweek.org/proceedings/index.htm ER - TY - JOUR A1 - Schmeißer, Dieter A1 - Paloumpa, Ioanna A1 - Hoffmann, Patrick A1 - Burkov, Yevgen A1 - Yfantis, Alexandros D. A1 - Yfantis, Alexandros D. T1 - Preventing Corrosion of Aluminium Alloys by Polymeric Coatings N2 - Aluminium is a material of everyday use in many applications,like automobile,aero-space or cookware,due to its specialproperties (low density,low weight,strength,easy to form and cast,abundance etc).Although aluminium is a reactive metal,italso has a significant corrosion resistance because of a thin,protective oxide layer which is generally stable in air and aqueous solutions.However,pores within the oxide film and other defects caused from alloying elements can lead to local corrosion and the formation of pits. Y1 - 2003 ER - TY - GEN A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Carbon-plot-microstructuring for all-polymer-transistors T2 - Synthetic Metals N2 - This contribution describes the use of a low-cost technology to produce organic microstructures for electronically applications. With a computer driven plotter, substrates like printing foil and colloidal graphite (diluted in water) for the electrodes, we realised channel lengths of 20±10 microm. Compared with transistor devices, fabricated using conventional photolithographic methods and the same semiconducting material, this technique is a hopeful approach to produce microelectronic structures that are low-cost and all-organic. KW - Ten micrometer carbon-plot KW - Organic field-effect-transistors KW - Low-cost-technique Y1 - 2003 SN - 0379-6779 VL - 138 IS - 1-2 SP - 271 EP - 273 ER - TY - JOUR A1 - Paloumpa, Ioanna A1 - Yfantis, Alexandros D. A1 - Hoffmann, Patrick A1 - Burkov, Yevgen A1 - Yfantis, Alexandros D. A1 - Schmeißer, Dieter T1 - Mechanisms to inhibit corrosion of Al alloys by polymeric conversion coatings N2 - We introduce a recently developed novel polypyrrole-based coating, which can be formed on the aluminium surface from an aqueous pyrrole solution of fluorozirconic and fluorotitanic acid neutralised with zinc oxide. The composite layer consists of polypyrrole (Ppy) chemisorbed on titanium and zinc oxides and exhibits advanced corrosion resistance. For the investigation of the structure and the corrosion mechanism of the composite corrosion resistant layer we use a photo-electron emission microscope (PEEM). PEEM is especially suitable because it can deliver topographic contrast as well as elemental contrast and chemical information in connection with a variable X-ray source. Additionally, in order to investigate further the corrosion mechanism, but also the role of the alloy in the corrosion process, we examine the aluminium samples with SEM/EDX. The structure of the corrosion resistant layer was investigated before and after accelerated corrosion tests. Our results pointed out the important role of titanium oxide and zinc in the corrosion resistance of our Ppy coating on aluminium. KW - Polypyrrole KW - Fluorozirconates KW - Fluorotitanates KW - Aluminium KW - Corrosion Y1 - 2004 ER - TY - GEN A1 - Yfantis, Alexandros D. A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter ED - Kainer, Karl Ulrich T1 - Corrosion Protection by Conductive Polymers for Magnesium Alloys T2 - Magnesium, proceedings of the 6th International Conference on Magnesium Alloys and their Applications, November 2003 in Wolfsburg N2 - In this work, we present the experimental data related to the effect of the polypyrrole concentration and the film thickness on the corrosion inhibition properties of these novel polymer coatings. The relative corrosion resistance properties of the films formed from the matrix solutions, where polypyrrole was in situ polymerized and in cases where polypyrrole is dispersed in a form of powder (pigment) in the polyaclylic polymer, are further examined. The evaluation of the experimental data provides significant evidence regarding the mechanism of corrosion inhibition, as well as the optimization of the synthesis and application conditions. KW - corrosion protection KW - conductive polymers for magnesium alloys KW - polypyrrole Y1 - 2004 SN - 3-527-30975-6 SP - 605 EP - 610 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Goryachko, Andriy A1 - Paloumpa, Ioanna A1 - Beuckert, Guido A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - The Interaction of Pr2O3 with 4H-SiC(0001)surface JF - Physica status solidi / C N2 - Praseodymium oxide (Pr2O3) as a hetero-oxide on SiC(0001) represents a promising semiconductor / high-K dielectric material combination. We prepared thin films (<3 nm) of Pr2O3 on 4H-SiC(0001) surfaces by a wet chemical process involving aqueous solutions of Pr(NO3)3. Synchrotron radiation photoelectron spectroscopy (SR-PES) is used to study the chemical composition of these films after deposition and annealing in 300-900 %B0C range. The Si2p and C1s core level emissions are analysed in detail and reveal that praseodymium-silicate is formed at the interface. Our data are compared to corresponding studies of the Pr2O3 interaction with Si(001) surfaces. Y1 - 2004 SN - 1610-1634 VL - 1 IS - 2 SP - 265 EP - 268 ER - TY - GEN A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - A polymer high-k dielectric insulator for organic field effect Transistors T2 - Journal of Applied Physics Y1 - 2005 SN - 0021-8979 VL - 98 IS - 5 SP - S. 056104 ER - TY - GEN A1 - Henkel, Karsten A1 - Sohal, Rakesh A1 - Torche, Mohamed A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter T1 - Grenzflächenoptimierung für funktionale Dünnschichtsysteme: Oxide und Polymere T2 - Forum der Forschung Y1 - 2005 SN - 0947-6989 VL - 9 IS - 18 SP - 49 EP - 56 ER - TY - JOUR A1 - Müller, Klaus A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter A1 - Henkel, Karsten T1 - Organic thin film transistors with polymer high-k dielectric insulator KW - high-k Y1 - 2006 ER - TY - JOUR A1 - Schmeißer, Dieter A1 - Burkov, Yevgen A1 - Paloumpa, Ioanna A1 - Mandal, Dipankar A1 - Henkel, Karsten T1 - Microscopic and Spectroscopic Characterization of Interfaces and Dielectric Layers for OFET Devices Y1 - 2008 ER - TY - GEN A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Spin coated organic ferroelectric films for non volatile memories KW - organic KW - ferroelectric Y1 - 2011 ER - TY - GEN A1 - Henkel, Karsten A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Buffer layer incestigaions on MFIS capacitors consisting of ferroelectric poly[vinylidene fluoride trifluoroethylene] T2 - IOP conference series : Materials Science and Engineering KW - MFIS capacitors KW - ferroelectric Y1 - 2010 SN - 1757-899X VL - 8 IS - 1 SP - 012036 ER - TY - CHAP A1 - Müller, Klaus A1 - Burkov, Yevgen A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Goryachko, Andriy A1 - Schmeißer, Dieter ED - Wöll, Christof T1 - Microscopic and spectroscopic characterization of interfaces and dielectric layers for OFET devices T2 - Organic Electronics : structural and Electronic Properties of OFETs KW - microscopic KW - spectrocsopic KW - dielectric Y1 - 2009 SN - 978-3-527-40810-8 SP - 445 EP - 468 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Henkel, Karsten A1 - Lazareva, I. A1 - Mandal, Dipankar A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Koval, Yuri A1 - Müller, P. A1 - Schmeißer, Dieter T1 - Electrical investigations on metal/ferroelectric/insulator/semiconductor structures using Poly[vinylidene fluoride trifluoroethylene] as ferroelectric layer for organic nonvolatile memory applications KW - metal KW - frerroelectric KW - insulator KW - semiconductor Y1 - 2009 ER - TY - JOUR A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Ferroelectric properties of spin-coated ultrathin (down to 10nm) copolymer films KW - ferroelectric KW - spin-coated KW - copolymer Y1 - 2008 ER - TY - CHAP A1 - Henkel, Karsten A1 - Mandal, Dipankar A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Lazareva, I. A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Electrical investigations on MFIS structures consisting P[VDF/TrFE] as ferro-electric layer for non-volatile memory applications T2 - Proceedings of 15th Workshop on Dielectrics in Microelectronics, Bad Saarow, 23 - 25 June 2008, Bad Saarow (Berlin) KW - MFIS, P[VDF/TrFE] KW - ferroelectric KW - non-volatile Y1 - 2008 SP - 159 EP - 160 ER -