TY - GEN A1 - Mahmoodinezhad, Ali A1 - Morales, Carlos A1 - Naumann, Franziska A1 - Plate, Paul A1 - Meyer, Robert A1 - Janowitz, Christoph A1 - Henkel, Karsten A1 - Kot, Małgorzata A1 - Flege, Jan Ingo T1 - Low-temperature atomic layer deposition of indium oxide thin films using trimethylindium and oxygen plasma T2 - Verhandlungen der DPG - SurfaceScience21 N2 - Indium oxide thin films were deposited on Si (100) by plasma-enhanced atomic layer deposition (PEALD) using trimethylindium (TMIn) and oxygen plasma (O2) in a low-temperature range of 80 to 200 °C. The In2O3 layers were characterized by in-situ spectroscopic ellipsometry (SE), ex-situ X-ray photoelectron spectroscopy (XPS) and electrical measurements. The SE data show a growth rate of 0.56 Å/cycle within the ALD window (100 to 150 °C) with a thickness inhomogeneity of ≤1.2%. In addition, the highest refractive index is 2.07 (at 632.8 nm) for the layer grown at 150 °C, and the films exhibit indirect and direct band gaps of 2.8±0.1 eV and 3.3±0.2 eV, respectively. XPS characterization indicates no carbon incorporation and a temperature-dependent off-stoichiometry of the layers. The chemical analysis of the In 3d and O 1s core levels confirms the formation of In-O bonds and suggests the additional presence of hydroxyl groups and defects. With increasing temperature, the contribution of OH groups and defects decreases whereas that of In-O bonds increases. Notably, higher growth temperatures result in an indium rich phase within the layers. KW - Indium oxide KW - Plasma enhanced atomic layer deposition KW - Spectroscopic ellipsometry KW - X-ray photoelectron spectroscopy Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/74/contribution/8 VL - 2021 PB - Deutsche Physikalische Gesellschaft e.V. CY - Bad Honnef ER - TY - GEN A1 - Morales, Carlos A1 - Mahmoodinezhad, Ali A1 - Schubert, Andreas Markus A1 - Wenger, Christian A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Functional ultra-thin oxide films deposited by atomic layer deposition on structured substrates T2 - Verhandlungen der DPG - SurfaceScience21 N2 - In the last decades, atomic layer deposition (ALD) has gained prominence in the materials and surface science communities owing to its high potential for integration as a scalable process in microelectronics. ALD's largest strengths are its well-controlled layer-by-layer deposition and growth conformity on 3D structures. Yet, the ALD technique is also well known to lead to amorphous and defective, non-stoichiometric thin films, resulting in modified materials properties that may even preferentially be used in certain applications. To study these issues, we have developed an in-situ ALD reactor attached to an X-ray photoelectron spectroscopy (XPS) system, capable of switching between both pump and flow-type operation. This novel tool allows to cover the entire range of compounds and recipes used in ALD, thus clarifying the role of such defects at different deposition stages, growth conditions and film/substrate interfaces. To exemplify these sorts of studies, we show the deposition of Al2O3 5-10 nm films on nanostructured Si, and their use as substrates for functional CeOx ALD deposits. KW - Atomic layer deposition KW - sensors KW - structured substrates KW - in-situ X-ray photoelectron spectroscopy Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/74/contribution/5 VL - 2021 PB - Deutsche Physikalische Gesellschaft e.V. CY - Bad Honnef ER - TY - GEN A1 - Mahmoodinezhad, Ali A1 - Morales, Carlos A1 - Naumann, Franziska A1 - Plate, Paul A1 - Meyer, Robert A1 - Janowitz, Christoph A1 - Henkel, Karsten A1 - Kot, Małgorzata A1 - Zöllner, Marvin Hartwig A1 - Wenger, Christian A1 - Flege, Jan Ingo T1 - Low-temperature atomic layer deposition of indium oxide thin films using trimethylindium and oxygen plasma T2 - Journal of Vacuum Science and Technology A N2 - Indium oxide (InxOy) thin films were deposited by plasma-enhanced atomic layer deposition (PEALD) using trimethylindium and oxygen plasma in a low-temperature range of 80–200 °C. The optical properties, chemical composition, crystallographic structure, and electrical characteristics of these layers were investigated by spectroscopic ellipsometry (SE), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), as well as current-voltage and capacitance-voltage measurements. The SE results yielded a nearly constant growth rate of 0.56 Å per cycle and a thickness inhomogeneity of ≤1.2% across 4-in. substrates in the temperature range of 100–150 °C. The refractive index (at 632.8 nm) was found to be 2.07 for the films deposited at 150 °C. The PEALD-InxOy layers exhibit a direct (3.3 ± 0.2 eV) and an indirect (2.8 ± 0.1 eV) bandgap with an uptrend for both with increasing substrate temperature. Based on XPS characterization, all InxOy samples are free of carbon impurities and show a temperature-dependent off-stoichiometry indicating oxygen vacancies. XRD diffraction patterns demonstrate an onset of crystallization at 150 °C. Consistent with the optical, XPS, and XRD data, the films deposited at ≥150 °C possess higher electrical conductivity. Our findings prove that a low-temperature PEALD process of InxOy is feasible and promising for a high-quality thin-film deposition without chemical impurities on thermally fragile substrates. KW - Indium oxide KW - Plasma-enhanced atomic layer deposition KW - X-ray photoelectron spectroscopy KW - Ellipsometry KW - X-ray diffraction KW - Electrical properties Y1 - 2021 U6 - https://doi.org/10.1116/6.0001375 SN - 0734-2101 SN - 1520-8559 VL - 39 IS - 6 ER - TY - GEN A1 - Janowitz, Christoph A1 - Mahmoodinezhad, Ali A1 - Kot, Małgorzata A1 - Morales, Carlos A1 - Naumann, Franziska A1 - Plate, Paul A1 - Zöllner, Marvin Hartwig A1 - Bärwolf, Florian A1 - Stolarek, David A1 - Wenger, Christian A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Toward controlling the Al2O3/ZnO interface properties by in situ ALD preparation T2 - Dalton Transactions N2 - An Al2O3/ZnO heterojunction was grown on a Si single crystal substrate by subsequent thermal and plasma-assisted atomic layer deposition (ALD) in situ. The band offsets of the heterointerface were then studied by consecutive removal of the layers by argon sputtering, followed by in situ X-ray photoelectron spectroscopy. The valence band maximum and conduction band minimum of Al2O3 are found to be 1.1 eV below and 2.3 eV above those of ZnO, resulting in a type-I staggered heterojunction. An apparent reduction of ZnO to elemental Zn in the interface region was detected in the Zn 2p core level and Zn L3MM Auger spectra. This suggests an interface formation different from previous models. The reduction of ZnO to Zn in the interface region accompanied by the creation of oxygen vacancies in ZnO results in an upward band bending at the interface. Therefore, this study suggests that interfacial properties such as the band bending as well as the valence and conduction band offsets should be in situ controllable to a certain extent by careful selection of the process parameters. KW - ALD heterojunction KW - band alignement KW - ZnO KW - Al2O3 KW - interface properties Y1 - 2022 U6 - https://doi.org/10.1039/D1DT04008A SN - 1477-9234 SN - 1477-9226 VL - 51 SP - 9291 EP - 9301 ER - TY - GEN A1 - Tschammer, Rudi A1 - Kosto, Yuliia A1 - Morales, Carlos A1 - Schmickler, Marcel A1 - Henkel, Karsten A1 - Devi, Anjana A1 - Flege, Jan Ingo T1 - Atomic layer deposition of cerium oxide monitored by operando ellipsometry and in-situ X-ray photoelectron spectroscopy T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) has been used extensively to grow homogeneous films with excellent coverage and atomic-scale thickness control for a variety of applications. However, remaining challenges include the investigation of novel precursor-oxidant combinations for low-temperature deposition as well as unraveling the complex interplay between substrate and coating for ultrathin films. In this work, we present a detailed investigation of ultrathin cerium oxide films grown using the novel Ce(dpdmg)3 precursor with H2O and O2. Following a surface science-based approach, we have combined operando spectroscopic ellipsometry and in-situ X-ray photoelectron spectroscopy to allow rapid process optimization and determination of the complex relation between oxide stoichiometry, film thickness and ALD growth parameters, revealing a distinct dependence of inital Ce3+ content on the film thickness and choice of oxidant. This offers the possibility of adjusting the oxide properties to application requirements e.g. in gas sensing by choosing a suitable precursor-oxidant combination. KW - Atomic layer deposition (ALD) KW - ceria KW - low-temperature deposition KW - operando spectroscopic ellipsometry KW - in-situ X-ray photoelectron spectroscopy KW - film thickness KW - oxidant choice KW - cerium oxidation state Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/49/contribution/4 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Gertig, Max A1 - Morales, Carlos A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - In situ X-ray photoelectron spectroscopy study of atomic layer deposited ceria on SiO2: substrate influence on the reaction mechanism during the early stages of growth T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) is known to produce amorphous and defect-rich films in a layer-by-layer fashion, which can potentially give rise to unexpected material properties. In particular, ultrathin films (few monolayers) will show the highest complexity, as the substrate-material interaction will play a major role during deposition. Therefore, it is crucial to understand the early stages of growth of the ALD process to control and potentially tailor this interfacial interaction. Applying a surface science approach combined with complementary ex-situ characterization, we have studied by in-situ X-ray photoelectron spectroscopy (XPS) the early stages of ceria (CeOx) growth on SiO2 substrates deposited by thermal-ALD using Ce(thd)4/O3. Interestingly, an initial mixture of Ce3+ and Ce4+ was observed, although only Ce4+ may be expected considering the used precursor and oxidant. This fact, together with a deviation from the ideal layer-by-layer growth and a higher growth rate during the first cycles, indicates a significant influence of the substrate of the ALD reaction mechanism as well as a correlation between morphology and ceria oxidation state. KW - Atomic layer deposition (ALD) KW - X-ray photoelectron spectroscopy (XPS) KW - in-situ KW - ceria Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/67/contribution/7 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Kosto, Yuliia A1 - Kapuscik, Paulina A1 - Tschammer, Rudi A1 - Guttmann, Dominic A1 - Mankowska, Ewa A1 - Matvija, Peter A1 - Morales, Carlos A1 - Mazur, Michał A1 - Henkel, Karsten A1 - Matolinova, Iva A1 - Domaradzki, Jarosław A1 - Flege, Jan Ingo T1 - Bare and Pd-doped ceria thin films prepared by ALD and EBE for hydrogen detection T2 - Verhandlungen der DPG N2 - The need to store and use hydrogen safely as part of green economy based on renewable energy evokes a necessity to reliably detect it at ambient conditions. The majority of currently used sensors are working at elevated temperatures (200-500 °C). In this work, we demonstrate that ceria films deposited on a commercial electrode by atomic layer deposition (ALD) and electron beam evaporation (EBE) electrically respond to hydrogen (from 20 to 500 ppm) at much lower temperatures (50-200 °C). The results reveal that <1.5 nm thin Pd adlayer increases the electrical response by several orders of magnitude for both ceria films. The NAP-XPS study under changing oxidative/reductive atmospheres sheds light on the mechanism of Pd-CeOx thermal activation and the role of the deposition technique in the reactivity of the oxide. KW - Hydrogen sensor KW - Atomic layer deposition (ALD) KW - ceria KW - Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/59/contribution/5 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Morales, Carlos A1 - Kosto, Yuliia A1 - Tschammer, Rudi A1 - Henkel, Karsten A1 - Flege, Jan Ingo T1 - Unraveling the effects of substrate interaction on the chemical properties of atomic layer deposited ultra-thin ceria layers T2 - Verhandlungen der DPG N2 - Atomic layer deposition (ALD) is well known to lead to amorphous and defective, non-stoichiometric films, potentially resulting in modified material properties that can also be affected by film/substrate interaction in the case of ultra-thin growths. For example, the formation, diffusion, and recovery of oxygen vacancies can be favored in disordered, reducible metal oxides compared to more ordered deposits, whereas interdiffusion processes can critically affect the film/substrate interface region. These effects have extensively been studied for thin thermal-ALD ceria films (below 15 nm) by combining in-situ and ex-situ characterization techniques in our lab and at synchrotron radiation facilities. While using alumina or silica substrates modifies the initial growth rate, Ce3+/Ce4+ ratio, and ceria morphology, the formation of different species at the interface affects its reactivity. Interestingly, the experiments have shown high reducibility of ALD-ceria ultrathin films on silica for very low hydrogen concentrations, even at room temperature, whereas for alumina substrates the formation of aluminates at the interface prevents further oxidation. Moreover, the comparison with more ordered films indicates a key role of the defective structure of ALD films in Ce3+/Ce4+ conversion. KW - Atomic layer deposition (ALD) KW - ceria KW - interface reaction KW - morphology KW - reducibility KW - hydrogen detection Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/49/contribution/8 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Kot, Małgorzata A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Internal chemical potential in mixed covalent-ionic photosensitive systems T2 - Journal of Vacuum Science & Technology A N2 - The internal chemical potential Γ of mixed covalent-ionic systems represents the potential differences between the covalent and the ionic intrinsic defect states located within the ionic gap. It is the key parameter to control the carrier densities, the stability regimes, and the photosensitive properties of materials. In this work, we describe first the quantitative analysis of the carrier densities in dependence on the internal potential Nπ(Γ) based on the common features of the electronic structure of mixed covalent-ionic materials. Subsequently, this method is applied on two mixed covalent-ionic materials, i.e., formamidinium lead triiodide and gallium oxide, as representatives of the respective families of perovskites (halides) and transparent conducting oxide thin films. Based on this analysis, the carrier densities as well as the photosensitivity mechanisms and the related specific properties of these materials in dependence on their internal chemical potential are discussed. KW - Polarons KW - Transport properties KW - Rectifier KW - Electrical properties and parameters KW - Perovskites KW - Thin films KW - Chemical compounds KW - Chemical potential KW - Photodissociation Y1 - 2025 U6 - https://doi.org/10.1116/6.0004179 SN - 0734-2101 VL - 43 (2025) IS - 1 SP - 1 EP - 9 PB - American Vacuum Society ER - TY - GEN A1 - Kosto, Yuliia A1 - Tschammer, Rudi A1 - Morales, Carlos A1 - Henkel, Karsten A1 - Flege, Jan Ingo A1 - Ratzke, Markus A1 - Fischer, Inga Anita A1 - Costina, Ioan A1 - Alvarado Chavarin, Carlos A1 - Wenger, Christian T1 - Rational design and development of room temperature hydrogen sensors compatible with CMOS technology: a necessary step for the coming renewable hydrogen economy T2 - Proceedings of iCampus Conference Cottbus 2024 N2 - The transition towards a new, renewable energy system based on green energy vectors, such as hydrogen, requires not only direct energy conversion and storage systems, but also the development of auxiliary components, such as highly sensitive hydrogen gas sensors integrated into mass devices that operate at ambient conditions. Despite the recent advances in nanostructured metal oxide thin films in terms of simple fabrication processes and compatibility with integrated circuits, high sensitivity, and short response/recovery times usually require the use of expensive noble metals or elevated tem-peratures (>250 ºC), which results in high power consumption and poor long-term stability. This article presents the first steps of the work on developing a novel resistive hydrogen gas sensor based on ultrathin cerium oxide films, compatible with complementary metal oxide semiconductor technology and capable of operating at room temperature. Here, we show a multidisciplinary bottom-up approach combining different work areas for the sensor development, such as sensor architecture, sensing mechanism and deposition strategy of the active layer, electrical contact design depending on the desired electrical output, and fast testing under controlled environments. KW - gas sensors KW - micro-structering KW - atomic layer deposition KW - sensor platform Y1 - 2024 SN - 978-3-910600-00-3 U6 - https://doi.org/10.5162/iCCC2024/P21 SP - 182 EP - 185 PB - AMA Service GmbH CY - Wunstorf ER -