TY - GEN A1 - Amirov, Fariz A1 - Abbasov, Vaqif A1 - Amirli, Samir A1 - Hasanli, Shalala A1 - Frana, Karel ED - Simon, Sylvio T1 - Formation of shaft accuracy during mechanical processing on CNC machines T2 - Machine Building and Energy: New Concepts and Technologies (MBENCT) N2 - The article discusses the study of the deformation of shafts with a diameter of ø30mm and a length of 400 mm during processing on CNC lathes. Experiments have revealed that during rough turning of the shafts, the magnitude of shaft deformation is 2.2-2.5 times greater compared to finish turning. It has been determined that during processing shafts on a CNC lathe, the maximum deformation is observed near the tailstock side of the machine. KW - Shaft turning, CNC machines, shaft deformation, tailstock, machine spindle. Y1 - 2024 U6 - https://doi.org/10.4028/p-N5uKb8 SN - 1662-0356 SP - 81 EP - 86 ER - TY - GEN A1 - Bürger, Andreas A1 - Simon, Sylvio A1 - Fritzsche, Pascal Dirk A1 - Hasanli, Shalala ED - Valiyev, Vilayat ED - Namazov, Subhan ED - Yusubov, Nizami ED - Simon, Sylvio T1 - Sensor-integrated machine elements : a brief overview of products and current technical developments T2 - Reliability : Theory and Applications N2 - Digitalisation offers enormous potential for significant innovations. In order to utilise this potential, comprehensive and reliable data on the operating status of machines is required. Almost every machine contains standardised machine elements (screws, bearings, gears, seals, etc.) in the immediate vicinity of the process and thus offer the possibility of obtaining and evaluating process-related measurement data by integrating sensor systems into these machine elements. A brief overview of commercially available sensor-integrated machine elements and a presentation of some current developments will be given. In addition, solutions for the power supply and data transmission of sensor-integrating machine elements are also briefly presented. KW - Machine elements KW - Energy harvesting KW - Bearings KW - Seals KW - Screws KW - Couplings KW - Splined shafts KW - Idlers Y1 - 2025 UR - https://www.gnedenko.net/Journal/2025/SI_072025/RTA_SI072025-056_56+28-b6-32%20tam-p442.pdf U6 - https://doi.org/10.24412/1932-2321-2025-783-442-449 SN - 1932-2321 VL - 20 IS - Special Issue 7 (83) SP - 442 EP - 449 PB - Gnedenko Forum CY - Medford MA; USA ER -