TY - GEN A1 - Shafiee, Parisa A1 - Mbuya, Christel-Olivier Lenge A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Novel approaches for preparation of 3D Ni-Al2O3 core with zeolite shell catalysts for dry reforming of methane T2 - 18th International Congress on Catalysis Y1 - 2024 UR - https://www.researchgate.net/publication/388109598_Novel_Approaches_for_Preparation_of_3D_Ni-Al2O3_Core_with_Zeolite_Shell_Catalysts_for_Dry_Reforming_of_Methane ER - TY - GEN A1 - Cunha Cordeiro, José Luiz A1 - Silva de Aquino, Gabrielle A1 - Santos da Silva, Jefferson A1 - Safdar, Muddasar A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey A1 - Valverde Pontes, Karen A1 - Santos Mascarenhas, Artur José T1 - Estudo do efeito do suporte em catalisadores de Ni preparados pelo método da combustão aplicados na reforma a seco do biogás para produção de hidrogênio sustentável T2 - 63rd Brazilian Chemistry Congress Y1 - 2024 UR - https://www.researchgate.net/publication/388109502_Estudo_do_efeito_do_suporte_em_catalisadores_de_Ni_preparados_pelo_metodo_da_combustao_aplicados_na_reforma_a_seco_do_biogas_para_producao_de_hidrogenio_sustentavel ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Farhadi, Maryam A1 - Arellano-García, Harvey T1 - Conceptual design of a reactive distillation column for the catalytic upgrade of ABE T2 - Jahrestreffen der DECHEMA-Fachgruppe Fluidverfahresntechnik Y1 - 2024 UR - https://www.researchgate.net/publication/388143625_Conceptual_design_of_a_reactive_distillation_column_for_the_catalytic_upgrade_of_ABE ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Mappas, Vassileios A1 - Vassiliadis, Vassilios S. A1 - Arellano-García, Harvey T1 - A second-order linesearch procedure within Newton’s method for highly nonlinear steady-state systems simulation T2 - 2024 AIChE Annual Meeting N2 - Linesearch, a crucial component of Newton’s method, ensures global convergence, guaranteeing convergence to a local solution from any starting point while satisfying all simultaneous nonlinear equations (Bellavia and Morini, 2003). Despite Newton’s method being considered established both theoretically and algorithmically, leaving little room for further improvements, this contribution focuses on enhancing the linesearch procedure and revealing significant advancements over existing methods. Specifically, this study aims to incorporate second-order information in a computationally efficient manner to improve the performance of the linesearch procedure, especially for highly nonlinear equation systems. Nonlinearity, particularly near the starting point, can substantially hinder algorithmic efficiency, necessitating frequent step reductions at the expense of function evaluations and major iterations involving Jacobian evaluations and factorizations (Gill and Zhang, 2024). The proposed approach leverages a a higher-order Taylor series expansion around the operating point of a major iteration in Newton’s algorithm, coupled with a custom Jacobian vector product finite difference scheme. This combination requires only one additional Jacobian evaluation to construct a locally accurate fourth-degree polynomial approximating the merit function along the search direction. In addition to the theoretical advancements, this contribution provides computational evidence supporting the claim that for highly nonlinear systems, significant computational savings and enhanced solution procedure stability can be achieved. Utilizing a Python implementation, linear subsets of equations are treated separately to boost the efficiency of function and Jacobian evaluations, aligning with standard practices in professional software development. While Python may not be a high-performance language, its suitability for rapid algorithm prototyping and validation precedes potential transfer to higher-performance languages like C++. Moreover, given Newton’s method central roles in various iterative solution tools, such as its repeated use within a Differential-Algebraic Equations (DAEs) integrators and potentially Partial Differential-Algebraic Equations (PDAEs) solvers, the significance of this work extends even further. Future research endeavors will explore these areas, building upon the foundations laid by this study. Y1 - 2024 UR - https://aiche.confex.com/aiche/2024/meetingapp.cgi/Paper/689676 ER - TY - GEN A1 - Shafiee, Parisa A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Improving catalysts and operating conditions using machine learning in Fischer-Tropsch synthesis of jet fuels (C8-C16) T2 - Chemical Engineering Journal Advances N2 - Fischer-Tropsch synthesis (FTS) offers a promising route for producing sustainable jet fuels from syngas. However, optimizing catalyst design and operating conditions for the ideal C8-C16 jet fuel range is challenging. Thus, this work introduces a machine learning (ML) framework to enhance Co/Fe-supported FTS catalysts and optimize their operating conditions for a better jet fuel selectivity. For this purpose, a dataset was implemented with 21 features, including catalyst structure, preparation method, activation procedure, and FTS operating parameters. Moreover, various machine-learning models (Random Forest (RF), Gradient Boosted, CatBoost, and artificial neural networks (ANN)) were evaluated to predict CO conversion and C8-C16 selectivity. Among these, the CatBoost model achieved the highest accuracy (R2 = 0.99). Feature analysis revealed that FTS operational conditions mainly affect CO conversion (37.9 %), while catalyst properties were primarily crucial for C8-C16 selectivity (40.6 %). The proposed ML framework provides a first powerful tool for the rational design of FTS catalysts and operating conditions to maximize jet fuel productivity. KW - Jet fuels (C8-C16) KW - Machine learning (ML) KW - Fischer-Tropsch synthesis (FTS) KW - Operational conditions KW - Catalyst preparation Y1 - 2025 U6 - https://doi.org/10.1016/j.ceja.2024.100702 VL - 21 (2025) PB - Elsevier ER - TY - GEN A1 - Shezad, Nasir A1 - Safdar, Muddasar A1 - Arellano-Garcia, Harvey A1 - Tai, Cheuk-Wai A1 - Chen, Shaojiang A1 - Seo, Dong-Kyun A1 - You, Shujie A1 - Vomiero, Alberto A1 - Akhtar, Farid T1 - Deciphering the role of APTES in tuning the metal support interaction of NiO nanolayers over hierarchical zeolite 13X for CO2 methanation T2 - Carbon Capture Science & Technology N2 - The development of robust nickel catalysts on porous substrates offers great potential for converting carbon dioxide (CO2) into methane, thereby helping to address the global warming and sustainability challenges. This study investigates the dispersion and stability of Ni nanolayers by grafting bifunctional groups over the hierarchical zeolite 13X (h13X) support using (3-aminopropyl)triethoxysilane (APTES). The Ni nanolayers, with a thickness of 1.5-7 nm, were deposited around the edges of h13X and analyzed using STEM imaging. A clear shift in the binding energies was observed by XPS analysis, substantiating the enhanced metalsupport interaction (MSI) between NiO and h13X. The influence of reaction temperature on APTES incorporation into h13X was revealed by H2-TPR and CO2-TPD, with notable variations in the reducibility and surface basicity profiles of the catalysts. The optimized catalyst exhibited CO2 conversion of 61% with CH4 selectivity of 97% under GHSV of 60,000 mlgCat-1h-1 at 400 oC and 1 bar and demonstrated robust stability over a period of 150 h without discernible degradation. The enhanced performance could be attributed to the strengthened MSI and reduced size of Ni nanolayers over h13X. These findings highlight the development of robust heterogeneous catalysts by changing the surface chemistry of support material for various catalytic applications. KW - CO2 methanation KW - Catalyst stability KW - Metal-support interaction KW - APTES functionalization KW - Nickel nanolayers KW - Hierarchical zeolite Y1 - 2025 UR - https://www.sciencedirect.com/science/article/pii/S2772656825000636 U6 - https://doi.org/10.1016/j.ccst.2025.100424 VL - 15 SP - 1 EP - 11 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Mappas, Vasileios A1 - Dorneanu, Bogdan A1 - Nolasco, Eduardo A1 - Vassiliadis, Vassilios A1 - Arellano-Garcia, Harvey T1 - Towards scalable quantum annealing for pooling and blending problems : a methodological proof-of-concept T2 - Chemical engineering research and design N2 - Industrial optimization challenges, such as the pooling and blending problem (PBP), require advanced computational methods to address non-convexity and scalability limitations in classical solvers. This work introduces a novel methodological framework for solving PBPs using quantum annealing (QA) that transforms the PBP into quadratic unconstrained binary optimization (QUBO) formulations at two resolution levels, enabling direct deployment on quantum annealers. Key innovations include a discretization technique tailored for PBP’s bilinear constraints and an embedding method optimized for current quantum hardware. Benchmarking against classical solvers focuses on Haverly’s classical three-stream PBP, enabling transparent comparison and development of quantum embedding and solution techniques. The proposed framework offers a scalable template for adapting similar engineering systems to quantum annealing architectures. Addressing genuine industrial-scale instances will require future advances in quantum hardware and embedding algorithms. The results demonstrate that QA exhibits the best performance among the examined alternatives, providing foundational insights towards leveraging QA in Process Systems Engineering. KW - Quantum annealing KW - Bilinear programming KW - Pooling/blending problem KW - Quadratic unconstrained binary optimization (QUBO) Y1 - 2025 U6 - https://doi.org/10.1016/j.cherd.2025.08.031 SN - 1744-3563 VL - 221 SP - 560 EP - 576 PB - Elsevier BV CY - Amsterdam ER - TY - GEN A1 - Mappas, Vasileios K. A1 - Dorneanu, Bogdan A1 - Heinzelmann, Norbert A1 - Arellano-Garcia, Harvey T1 - Capturing multiscale phenomena in trickle bed reactors : a flexible framework for flow and reaction analysis T2 - Jahrestreffen der DECHEMA/VDI-Fachgruppe Fluidverfahrenstechnik 2025 N2 - Multiphase systems, particularly trickle bed reactors (TBRs), are critical in various industrial applications and widely employed in catalytic processes such as hydrogenation and oxidation due to their high surface area, low operational and minimal catalyst loss. Despite advancements in modelling techniques, accurately capturing the complex multiphysics and multiscale phenomena remains challenging. Conventional approaches, relying on empirical correlations or Computational Fluid Dynamics (CFD) simulations, often fall short due to high computational demands, limited accuracy, and constraints on the number of catalytic particles that can be effectively simulated [3]. To address these limitations, this contribution presents a new framework tailored for the design and analysis of multiphase systems operating in the low-interaction regimes. This approach is based on the local structure of the packed bed and employs a Lagrangian approach, where flow dynamics within the reactor is represented by various discrete elements. The framework's modular and flexible setup enables the incorporation of multiscale information of both local and global levels, allowing for the additions of new modules or features to enhance modelling fidelity. Y1 - 2025 UR - www.researchgate.net/publication/388846704_Capturing_multiscale_phenomena_in_trickle_bed_reactors_A_flexible_framework_for_flow_and_reaction_analysis ER - TY - GEN A1 - Park, Haryn A1 - Lee, Joowha A1 - Kim, Jin-Kuk A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Pathways to industrial decarbonization : renewable energy integration and electrified hydrogen production T2 - Jahrestreffen der DECHEMA/VDI-Fachgruppe Fluidverfahrenstechnik 2025 N2 - Industrial sectors contribute substantially to global CO2 emissions, emphasizing the need for low-carbon, reliable energy supplies to meet operational demands. Achieving net-zero emissions in industrial processes involves transitioning from fossil fuels to renewable energy sources. However, the intermittent nature of renewables poses challenges to energy reliability and resilience, particularly in utility systems. This contribution addresses industrial decarbonisation and sustainable hydrogen production by developing a comprehensive design and optimization framework for integrating renewable energy systems into industrial operations. This framework incorporates energy storage and grid connections to improve flexibility and stability and is evaluated through two case studies. Both case studies analyse the operational and configurational changes necessary for renewable-powered hydrogen production, estimating the cost of hydrogen or CO2 avoidance cost to analyse economic viability. These insights provide guidelines for sustainable and economically viable energy management in industrial and hydrogen production sectors, supporting broader global energy transition goals. Y1 - 2025 UR - https://www.researchgate.net/publication/388846958_Pathways_to_industrial_decarbonization_Renewable_energy_integration_and_electrified_hydrogen_production ER - TY - GEN A1 - Schowarte, Julia A1 - Riedel, Ramona A1 - Safdar, Muddasar A1 - Helle, Sven A1 - Fischer, Thomas A1 - Arellano-García, Harvey T1 - Photocatalytic degradation of PFOA with porous lanthanoid perovskites nano catalyst T2 - Chemie - Ingenieur - Technik : CIT N2 - Perfluorooctanoic acid (PFOA), a persistent environmental pollutant, poses significant health and ecological risks. This study investigates for the first time the photocatalytic degradation of PFOA using novel doped perovskite catalysts under polychromatic UV–VIS irradiation with a peak emission at 366 nm. A series of nickel- and lanthanide-doped perovskites (NiMn2O4, LaMnO3, NdMnO3, and their nickel-doped variants) were synthesized via a facile co-precipitation technique and characterized using X-ray diffraction (XRD), UV–VIS diffuse reflectance spectroscopy (UV–VIS-DRS), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDX), N2-physisorption, and microwave plasma atomic emission spectroscopy (MP-AES). Photocatalytic experiments revealed that Ni/NdMnO3 exhibited the highest degradation efficiency toward PFOA, likely due to its small band gap energy of 1.5 eV, facilitating efficient C–C bond cleavage. KW - Lanthanoids KW - Perovskites KW - PFAS KW - PFOA KW - Photocatalysis Y1 - 2025 U6 - https://doi.org/10.1002/cite.70027 SN - 1522-2640 SP - 1 EP - 11 PB - Wiley-VCH GmbH CY - Weinheim ER - TY - GEN A1 - Yentumi, Richard A1 - Jurischka, Constantin A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Optimal design and analysis of thermochemical storage and release of hydrogen via the reversible redox of iron oxide/iron T2 - Systems and control transactions N2 - In this contribution, a thermodynamic model-based approach for the optimal design of a solid-state hydrogen storage and release system utilizing the reversible iron oxide/iron thermochemical redox mechanism is presented. Existing storage processes using this mechanism face significant limitations, including low hydrogen conversion, high energy input requirements, limited storage density, and slow charging/discharging kinetics. To address these challenges, a custom thermodynamic model using NIST thermochemistry data is developed, enabling an in-depth analysis of redox reaction equilibria under different conditions. Unlike previous studies, this approach integrates a multi-objective optimization framework that explicitly balances competing objectives: maximizing hydrogen yield while minimizing thermal energy demand. By systematically identifying optimal trade-offs, the study provides new insights into improving process efficiency and reactor design for thermochemical hydrogen storage. These findings contribute to advancing energy-efficient and scalable hydrogen storage technologies. KW - Hydrogen KW - Hydrogen fuel cells KW - Energy storage KW - Modelling and simulations KW - Optimisation KW - Thermochemical storage KW - Green hydrogen Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.121492 SN - 2818-4734 VL - 4 SP - 631 EP - 636 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Mappas, Vasileios K. A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Solving complex combinatorial optimization problems using quantum annealing approaches T2 - Systems and control transactions N2 - Currently, state-of-the-art approaches to solving complex optimization problems have focused solely on methods requiring high computational time and unable to find the global optimal solution. In this work, a methodology based on quantum computing is presented to overcome these drawbacks. The novelty of this framework stems from the quantum computer's architecture and taking into consideration the quantum phenomena that take place to solve optimization problems with specific structure. The proposed methodology includes steps for the transformation of the initial optimization problem into an unconstrainted optimization problem with binary variables and its embedding onto a quantum device. Moreover, different resolution levels for the transformation step and different architectures for the embedding process are utilized. To illustrate the procedure, a case study based on Haverly's pooling and blending problem is examined while demonstrating the potential of the proposed approach. The results indicate that the succinct formulation exhibited higher success rate during the embedding procedure for the different examined architectures, and the quantum annealing solver exhibited the best performance among the various solvers investigated. This highlights the potential of the approach for solving this type of problems with the rapid development and improvement of quantum hardware and expanding it to more complex chemical engineering optimization systems. KW - Optimization KW - Scheduling KW - Algorithms KW - Quantum Computing KW - Quantum Annealing Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.188358 SN - 2818-4734 VL - 4 SP - 1561 EP - 1566 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Shafiee, Parisa A1 - Jafari, Mitra A1 - Schowarte, Julia A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Streamlining catalyst development through machine learning : insights from heterogeneous catalysis and photocatalysis T2 - Systems and control transactions N2 - Catalysis design and reaction condition optimization are considered the heart of many chemical and petrochemical processes and industries; however, there are still significant challenges in these fields. Advances in machine learning (ML) have provided researchers with new tools to address some of these obstacles, offering the ability to predict catalyst behaviour, optimal reaction conditions, and product distributions without the need for extensive laboratory experimentation. In this contribution, the potential applications of ML in heterogeneous catalysis and photocatalysis are explored by analysing datasets from different reactions, including Fischer-Tropsch synthesis and photocatalytic pollutant degradation. First, datasets were collected from literature. After cleaning and preparing the datasets, they were employed to train and test several models. The best model for each dataset was selected and applied for optimization. KW - Catalysis KW - Machine learning KW - Modelling KW - Optimization KW - Alternative fuels KW - Environment KW - FischerTropsch synthesis KW - Photocatalysis Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.135551 SN - 2818-4734 VL - 4 SP - 1866 EP - 1871 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Park, Haryn A1 - Lee, Joowha A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey A1 - Kim, Jin-Kuk T1 - Cost-effective process design and optimization for decarbonized utility systems integrated with renewable energy and carbon capture systems T2 - Systems and control transactions N2 - Industrial decarbonization is considered one of the key objectives in mitigating global climate change. To achieve a net-zero industry requires actively transitioning from fossil fuel-based energy sources to renewable alternatives. However, the intermittent nature of renewable energy sources poses challenges to a reliable and robust supply of energy for industrial sites. Therefore, the integration of renewable energy systems with existing industrial processes, subject to energy storage solutions and main grid interconnections, is essential to enhance operational reliability and overall energy resilience. This study proposes a novel framework for the design and optimization of industrial utility systems integrated with renewable energy sources. A monthly-based analysis is adopted to consider variable demand and non-constant availability in renewable energy supply. Moreover, carbon capture is considered in this work as a viable decarbonization measure, which can be strategically combined with renewable-based electrification. The proposed optimization model evaluates the economic trade-offs of integrating carbon capture, renewable energy, and energy storage. By applying this approach, systematic design guidelines are developed for the transition of a conventional steady-state utility system toward renewable energy integration, ensuring economically viable and sustainable energy management in process industries. KW - Renewable energy KW - CO2 capture KW - Industrial utility operation KW - Cost optimization KW - Process integration Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.107403 SN - 2818-4734 VL - 4 SP - 1175 EP - 1180 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Mappas, Vasileios K. A1 - Dorneanu, Bogdan A1 - Heinzelmann, Norbert A1 - Schnitzlein, Klaus A1 - Arellano-Garcia, Harvey T1 - An efficient and unified modeling framework for trickle bed reactors : a modular approach T2 - Chemie - Ingenieur - Technik : CIT N2 - Trickle bed reactors (TBRs) involve complex and multiscale dynamics that challenge their design, modeling, and optimization. Current approaches often suffer from high computational cost and limited scalability, restricting their applicability in large-scale cases. This work introduces a modular, computationally efficient framework to address these issues by systematically capturing key transport and reaction phenomena. Furthermore, it provides a critical review of existing modeling strategies for TBRs, outlining their strengths and limitations and highlighting opportunities for enhancement through modularization. By offering a structured and scalable approach, the proposed framework improves predictive capabilities and supports the development of optimized and adaptable reactor designs. KW - Catalytic multiphase reactors KW - Modeling KW - Trickle bed reactors Y1 - 2025 U6 - https://doi.org/10.1002/cite.70035 SN - 1522-2640 VL - 97 IS - 11-12 SP - 1110 EP - 1126 PB - Wiley CY - Weinheim ER - TY - GEN A1 - Cunha Cordeiro, José Luiz A1 - Safdar, Muddasar A1 - Santos da Silva, Jefferson A1 - De Aquino, Gabrielle A1 - Dos Santos, Mauricio A1 - Cruz, Fernanda A1 - Fiuza-Junior, Raildo A. A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey A1 - Pontes, Karen A1 - Mascarenhas, Artur T1 - Influência do Suporte em Catalisadores de Ni Obtidos Pelo Método da Combustão na Reforma a Seco do Biogás para Produção de Hidrogênio Sustentável T2 - 23º CBCAT : Congresso Brasileiro de Catalise T2 - 23rd Brazilian Congress of Catalysis N2 - Este estudo avaliou catalisadores de NiO suportados em MgO, ZrO₂, Al₂O₃, La₂O₃ e CeO₂ para reforma a seco do biogás. As caracterizações revelaram variações na dispersão metálica, área metálica e morfologia superficial. Os catalisadores NiO-Al₂O₃ e NiO-CeO₂ apresentaram maior área metálica e melhor dispersão de Ni, favorecendo altas conversões de CH₄ e CO₂ e bom rendimento em H₂. O NiO-Al₂O₃ foi o mais eficiente e estável por 8 horas de reação. O NiO-La₂O₃ mostrou aumento progressivo da atividade e boa resistência ao coque. O NiO-CeO₂, embora ativo no início, desativou com o tempo devido à deposição de coque (6,4%). A análise pós-reação mostrou baixa formação de coque na maioria dos catalisadores. Os resultados indicam que o suporte tem papel determinante na atividade, estabilidade e resistência dos catalisadores na reforma a seco do biogás. Palavras-chave: Hidrogênio sustentável; Reforma a seco do biogás; Catalisadores de NiO; efeito do suporte ABSTRACT-This study evaluates NiO-based catalysts supported on MgO, ZrO₂, Al₂O₃, La₂O₃, and CeO₂ for the dry reforming of biogas. Characterization of the samples revealed differences in metal dispersion, metallic area, and surface morphology. NiO-Al₂O₃ and NiO-CeO₂ show higher metallic areas and better Ni dispersion, leading to higher CH₄ and CO₂ conversions and good H₂ yield. NiO-Al₂O₃ is the most efficient and stable catalyst over 8 hours of reaction. NiO-La₂O₃ shows a gradual increase in activity and good coke resistance. Conversely, NiO-CeO₂, despite high initial activity, deactivates over time due to coke deposition (6.4%). Post-reaction analysis confirmed low coke formation for most catalysts. The results indicate that the choice of support directly affects catalyst activity, stability, and resistance. KW - Hidrogêniosustentável KW - Reforma a secodo biogás KW - Catalisadores de NiO KW - Efeito dosuporte KW - Sustainable hydrogen KW - Biogas dry reforming KW - NiO Catalysts KW - Supportrole Y1 - 2025 UR - https://submissao.cbcat.sbcat.org/index.php/23CBCAT/article/view/203 UR - https://submissao.cbcat.sbcat.org/index.php/23CBCAT/article/view/203/303 VL - 1 IS - 1 SP - 1 EP - 6 ER - TY - GEN A1 - Mbuya, Christel Olivier Lenge A1 - Pawar, Kunal A1 - Jafari, Mitra A1 - Shafiee, Parisa A1 - Okoye Chine, Chike George A1 - Tarifa, Pilar A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey T1 - Tuning catalyst performance in methane dry reforming via microwave irradiation of Nickel-Silicon carbide systems T2 - Journal of CO2 utilization N2 - The dry reforming of methane (DRM) is a promising route for converting greenhouse gases such as methane (CH4) and carbon dioxide (CO2) into valuable syngas, hydrogen (H2) and carbon monoxide (CO). However, traditional nickel (Ni)-based catalysts suffer from rapid deactivation due to carbon deposition and sintering, especially when supported on low thermal conductivity materials. In this work, a novel post-synthesis microwave irradiation (MIR) treatment is introduced to systematically optimize the performance of Ni – β – SiC and Ni – Ti – Cβ – SiC catalysts for DRM. Unlike previous studies that have used MIR during reaction or with different supports, this approach tunes the metal – support interactions and textural properties of Ni – β – SiC and Ni – Ti – Cβ – SiC catalysts by varying the MIR exposure time after catalyst synthesis. MIR post-treatment (10–25 s) increased the CH4 conversion to 65 % and the CO2 conversions to 62 % for Ni–β–SiC catalysts and improved the H₂/CO ratio to 0.80, with stable performance over 20 h. For Ni–Ti–Cβ–SiC, MIR (10–20 s) maintained CH4 conversion up to 60 % and CO2 conversion to 58 % over 20 h, while the untreated catalyst, though initially higher, deactivated rapidly. Excessive MIR (30 s) reduced performance for both catalyst types, underscoring the need for optimal exposure time. These findings demonstrate post-synthesis MIR provides a tuneable approach for enhancing both the activity and durability of Ni/SiC – based DRM catalysts through controlled modification of metal – support interactions. This work offers new insights for the design of robust catalysts aimed at greenhouse gas utilization and sustainable syngas production, with activity and stability enhancements linked to controlled changes in metal – support interactions. KW - Carbon dioxide KW - Dry reforming KW - Methane KW - Microwave irradiation KW - Ni Silicon carbide catalysts Y1 - 2025 U6 - https://doi.org/10.1016/j.jcou.2025.103270 SN - 2212-9839 VL - 102 SP - 1 EP - 9 PB - Elsevier BV CY - Amsterdam ER - TY - GEN A1 - Cunha Cordeiro, José Luiz A1 - Safdar, Muddasar A1 - Santos da Silva, Jefferson A1 - Silva de Aquino, Gabrielle A1 - Vaz dos Santos Rios, João Gabriel A1 - Brandão dos Santos, Maurício A1 - Teixeira Cruz, Fernanda A1 - Alves Fiuza-Junio, Raildo A1 - Dorneanu, Bogdan A1 - Arellano-Garcia, Harvey A1 - Valverde Pontes, Karen A1 - Santos Mascarenhas, Artur José T1 - Effect of support on Ni catalysts prepared by the combustion method applied in the dry reforming of biogas for production of sustainable hydrogen T2 - International journal of hydrogen energy N2 - This work investigated Ni catalysts on different supports (MgO, ZrO2, NiAl2O4, CeO2 and La2O3) prepared by the combustion method aiming for sustainable hydrogen production via simulated biogas dry reforming. The Ni/NiAl2O4 catalyst stood out among the materials due to its high Ni dispersion, low crystallite size and strong metal-support interaction, being stable for 8 h of reaction with high H2 yield and low coke deposition. The Ni/CeO2 catalyst showed good catalytic activity, but with high coke deposition (11.7 %). The Ni/La2O3 catalyst showed an increase over the reaction time, due to the dynamic reconstruction of the surface. The Ni/MgO and Ni/ZrO2 catalysts did not present satisfactory performance when compared to the other catalysts, due to the low Ni dispersion and high crystallite size. The Ni/NiAl2O4 catalyst is very promising, due to the high production of H2, low coke deposition, thermal stability, but new studies on durability and economic viability are necessary. KW - Sustainable hydrogen production KW - Biogas dry reforming KW - Ni-supported catalysts KW - Support effect KW - Combustion synthesis method Y1 - 2026 U6 - https://doi.org/10.1016/j.ijhydene.2025.153150 SN - 1879-3487 VL - 204 SP - 1 EP - 25 PB - Elsevier BV CY - Amsterdam ER - TY - GEN A1 - Lee, Joohwa A1 - Park, Haryn A1 - Dorneanu, Bogdan A1 - Kim, Jin-Kuk A1 - Arellano-Garcia, Harvey T1 - Decarbonized hydrogen production : integrating renewable energy into electrified SMR process with CO₂ capture T2 - Systems and control transactions N2 - Electrified steam methane reforming has emerged as a promising technology for electrifying the hydrogen production process industries. Unlike conventional fossil fuel-based steam methane reforming, the electrified steam methane reforming process relies exclusively on electrical heating, eliminating the need for fossil fuel combustion. Beyond that, however, significant amounts of electricity required for the electrified process should be imported from the renewable energy-based system rather than fossil fuel-based grid electricity to have an environmental advantage over the conventional process. This study suggests a framework for integrating renewable energy systems into the electrified process for decarbonized hydrogen production. Considering the variability of renewable energy, wind and solar power are supplemented by battery storage, to facilitate a stable electricity supply to the electrified hydrogen production process. A Mixed-Integer Linear Programming (MILP) model is developed to optimally size and operate both the renewable system and potential grid imports. Case studies under various carbon tax scenarios, using historical weather data from a region in Germany, are conducted, followed by a techno-economic assessment to estimate the Cost of Hydrogen (COH). The results show that higher carbon taxes and reduced capital costs for wind, solar, and storage technologies significantly increase the share of renewable-based electricity. These findings highlight the importance of more stringent carbon taxation and improvements in the technology readiness level (TRL) of renewable energy are critical for accelerating large-scale, clean hydrogen production and industrial decarbonization. KW - Hydrogen KW - Renewable energy KW - Electrification Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.152295 SN - 2818-4734 VL - 4 SP - 613 EP - 618 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Mappas, Vasileios K. A1 - Arellano-Garcia, Harvey T1 - A novel approach to gradient evaluation and efficient deep learning : a hybrid method T2 - Systems and control transactions N2 - Deep learning faces significant challenges in efficiently training large-scale models. These issues are closely linked, as efficient training often depends on precise and computationally feasible gradient calculations. This work introduces innovative methodologies to improve deep learning network (DLN) training in complex systems. A novel approach to DLN training is proposed by adapting the block coordinate descent (BCD) method, which optimizes individual layers sequentially. This is combined with traditional batch-based training to create a hybrid method that harnesses the strengths of both techniques. Additionally, the study explores Iterated Control Random Search (ICRS) for initializing parameters and applies quasi-Newton methods like L-BFGS with restricted iterations to enhance optimization. By tackling DLN training efficiency, this contribution offers a comprehensive framework to address key challenges in modern machine learning. The proposed methods improve scalability and effectiveness, especially for handling complex real-world problems. Examples from Process Systems Engineering illustrate how these advancements can directly enhance the training of large-scale systems. KW - Artificial intelligence KW - Machine learning KW - Numerical methods Y1 - 2025 SN - 978-1-7779403-3-1 U6 - https://doi.org/10.69997/sct.120349 SN - 2818-4734 VL - 4 SP - 1872 EP - 1877 PB - PSE Press CY - Notre Dame, IN ER - TY - GEN A1 - Shezad, Nasir A1 - Samikannu, Ajaikumar A1 - Safdar, Muddasar A1 - Arellano-Garcia, Harvey A1 - Mikkola, Jyri-Pekka A1 - Seo, Dong-Kyun A1 - Akhtar, Farid T1 - Nickel supported over hierarchical zeolite 13X catalysts for enhanced conversion of carbon dioxide into methane T2 - International journal of energy research N2 - Catalytic conversion of carbon dioxide (CO2) into useful chemicals such as methane (CH4) is a promising carbon utilization method that effectively mitigates CO2 and partially meets energy needs. The characteristics of commonly used nickel (Ni) supported meso/microporous catalysts for CO2 methanation can be tailored by tuning the structural properties of the support and adding promoters. This work investigated the Ni supported over hierarchical zeolite 13X (h13X) and incorporated with different promoters (Mg, Ca, Ce, and La) developed using the wet-impregnation method. The catalysts were thoroughly characterized using SEM, EDS, XRD, H2-TPR, CO2-TPD, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and N2 sorption and desorption techniques and evaluated for CO2 methanation. The impact of promoters on the characteristics of the catalysts was observed with improved surface basicity in CO2-TPD and metal-support interaction in H2-TPR analysis. Among the promoted catalysts, the NiLa/h13X catalyst exhibited the highest catalytic activity with a maximum conversion of 76% and CH4 selectivity of 98.5% at 400°C and 20 bar at GHSV of 60,000 mL gcat−1 h−1, respectively. Regarding stability, the Mg-promoted catalyst exhibited better stability during 24 h of reaction than other catalysts, demonstrating better resilience against deactivation. The enhanced performance of the NiLa/h13X catalyst could be credited to the increased surface basicity, high surface area, and dispersion. This study highlights the potential of hierarchical porous zeolites for CO2 methanation and other heterogeneous reactions. KW - Carbon dioxide KW - Catalyst KW - Hierarchical zeolite KW - Methane KW - Nickel KW - Promoters Y1 - 2025 U6 - https://doi.org/10.1155/er/4728304 SN - 1099-114X VL - 2025 SP - 1 EP - 14 PB - Wiley CY - Hoboken, NJ ER - TY - GEN A1 - Safdar, Muddasar A1 - Sher, Farooq A1 - Arellano-Garcia, Harvey T1 - Perovskite materials for catalytic CO₂ valorisation : structural characteristics, synthesis and lattice substitutions for gas-phase reactions T2 - Journal of environmental chemical engineering N2 - Perovskites are emerging materials that are being extensively investigated for converting greenhouse gases (GHGs) through thermochemical processes due to their versatile properties. Given their distinct physical and chemical characteristics and their unique structure (ABO3, general formula), they are desirable candidates for designing state-of-the-art catalytic systems. For instance, they can be prepared with modified oxygen vacancies, enhanced redox potential, and tailored nanoparticle formulations for use in various catalytic gas-phase CO2 conversion processes, thereby facilitating the formation of valuable, renewable raw materials such as fuels and chemicals. This comprehensive review explains the perovskite structures, including their crystallographic properties, standard synthesis methods, recent advancements in A, B, and X-site substitutions, and their effectiveness in upgrading CO2 to produce valuable commodities via different synthetic routes in gas-phase reactions via methanation, reverse water gas shift reaction (rWGS), and dry reforming of methane (DRM). To achieve a sustainable clean energy supply, application-oriented, efficient, and advanced catalytic systems that support the necessary reaction conditions and serve as the most active and selective catalysts are reported in each synthetic gas-phase production section. This study highlights current advancements and optimised research efforts to design potential catalytic materials that meet future requirements for developing efficient decarbonised energy systems. The proposed synthesis methods are the most effective techniques for conserving time and energy. They can also yield favourable morphology and allow manipulation of nanoparticle size, both of which are essential for designing innovative catalysts. To address concerns about CO2 emissions harming the environment, this study focuses on adaptable, sustainable gas-phase reaction methods with diverse industrial applications. The primary emphasis is on effective, robust perovskite-based catalysts that enable the efficient conversion of CO2 into value-added chemicals and fuels, thereby supporting low-carbon energy and chemical technologies. This review delineates explicit correlations among synthesis, structure, properties, performance, and stability by relating perovskite lattice design, defect chemistry, and compositional flexibility to catalytic activity, selectivity, and durability in heterogeneous catalytic reactions. KW - Perovskites KW - Advanced materials KW - Clean energy KW - CO2 utilization KW - Substitutional sites KW - Catalytic applications Y1 - 2026 U6 - https://doi.org/10.1016/j.jece.2026.121473 SN - 2213-3437 VL - 14 IS - 2 SP - 1 EP - 35 PB - Elsevier BV CY - Amsterdam ER -