TY - GEN A1 - Arellano-García, Harvey A1 - El Bari, Hassan A1 - Kalibe Fanezoune, Casimir A1 - Dorneanu, Bogdan A1 - Majozi, Thokozani A1 - Elhenawy, Yasser A1 - Bayssi, Oussama A1 - Hirt, Ayoub A1 - Peixinho, Jorge A1 - Dhahak, Asma A1 - Gadalla, Mamdouh A. A1 - Khashaba, Nourhan H. A1 - Ashour, Fatma T1 - Catalytic Fast Pyrolysis of Lignocellulosic Biomass: Recent Advances and Comprehensive Overview T2 - Journal of Analytical and Applied Pyrolysis N2 - Using biomass as a renewable resource to produce biofuels and high-value chemicals through fast pyrolysis offers significant application value and wide market possibilities, especially in light of the current energy and environmental constraints. Bio-oil from fast-pyrolysis has various conveniences over raw biomass, including simpler transportation and storage and a higher energy density. The catalytic fast pyrolysis (CFP) is a complex technology which is affected by several parameters, mainly the biomass type, composition, and the interaction between components, process operation, catalysts, reactor types, and production scale or pre-treatment techniques. Nevertheless, due to its complicated makeup, high water and oxygen presence, low heating value, unstable nature, elevated viscosity, corrosiveness, and insolubility within conventional fuels, crude bio-oil has drawbacks. In this context, catalysts are added to reactor to decrease activation energy, substitute the output composition, and create valuable compounds and higher-grade fuels. The study aim is to explore the suitability of lignocellulosic biomasses as an alternative feedstock in CFP for the optimization of bio-oil production. Furthermore, we provide an up-to-date review of the challenges in bio-oil production from CFP, including the factors and parameters that affect its production and the effect of used catalysis on its quality and yield. In addition, this work describes the advanced upgrading methods and applications used for products from CFP, the modeling and simulation of the CFP process, and the application of life cycle assessment. The complicated fluid dynamics and heat transfer mechanisms that take place during the pyrolysis process have been better understood due to the use of CFD modeling in studies on biomass fast pyrolysis. Zeolites have been reported for their superior performance in bio-oil upgrading. Indeed, Zeolites as catalyses have demonstrated significant catalytic effects in boosting dehydration and cracking process, resulting in the production of final liquid products with elevated H/C ratios and small C/O ratios. Combining ex-situ and in-situ catalytic pyrolysis can leverage the benefits of both approaches. Recent studies recommend more and more the development of pyrolysis-based bio-refinery processes where these approaches are combined in an optimal way, considering sustainable and circular approaches. KW - Catalytic fast pyrolysis KW - Lignocellulosic Biomass KW - Bio-Oil KW - Modelling Y1 - 2024 U6 - https://doi.org/10.1016/j.jaap.2024.106390 SN - 0165-2370 VL - Vol. 178 ER - TY - GEN A1 - Arellano-García, Harvey A1 - Safdar, Muddasar A1 - Shezad, Nasir A1 - Akhtar, Farid T1 - Development of Ni-doped A-site lanthanides-based perovskite-type oxide catalysts for CO2 methanation by auto-combustion method T2 - RSC Advances N2 - Engineering the interfacial interaction between the active metal element and support material is a promising strategy for improving the performance of catalysts toward CO2 methanation. Herein, the Ni-doped rare-earth metal-based A-site substituted perovskite-type oxide catalysts (Ni/AMnO3; A = Sm, La, Nd, Ce, Pr) were synthesized by auto-combustion method, thoroughly characterized, and evaluated for CO2 methanation reaction. The XRD analysis confirmed the perovskite structure and the formation of nano-size particles with crystallite sizes ranging from 18 to 47 nm. The Ni/CeMnO3 catalyst exhibited a higher CO2 conversion rate of 6.6 × 10−5 molCO2 gcat−1 s−1 and high selectivity towards CH4 formation due to the surface composition of the active sites and capability to activate CO2 molecules under redox property adopted associative and dissociative mechanisms. The higher activity of the catalyst could be attributed to the strong metal–support interface, available active sites, surface basicity, and higher surface area. XRD analysis of spent catalysts showed enlarged crystallite size, indicating particle aggregation during the reaction; nevertheless, the cerium-containing catalyst displayed the least increase, demonstrating resilience, structural stability, and potential for CO2 methanation reaction. KW - perovskite KW - CO2 methanation KW - lanthanide KW - auto-combustion method Y1 - 2024 UR - https://pubs.rsc.org/en/content/articlelanding/2024/ra/d4ra02106a U6 - https://doi.org/10.1039/d4ra02106a VL - 2024 IS - 14 SP - 20240 EP - 20253 ER - TY - GEN A1 - Medina Méndez, Juan Ali A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Homogeneous modeling for laminar flows in structured catalysts: CO2 methanation T2 - Book of Abstracts zur Jahrestagung der DECHEMA/VDI-Fachgruppe Fluidverfahrenstechnik, 04. – 06. März 2024 Y1 - 2024 UR - https://www-docs.b-tu.de/fg-stroemungsmodellierung/public/Medina_2024_AbstractDechemaFluidverfahrenstechnik_Catalysts.pdf PB - Ruhr Universität CY - Bochum ER - TY - GEN A1 - Medina Méndez, Juan Ali A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Homogeneous modeling for laminar flows in structured catalysts: CO2 methanation Y1 - 2024 UR - https://www-docs.b-tu.de/fg-stroemungsmodellierung/public/Medina_2024_Poster_DECHEMA2024_Fluidverfahrenstechnik.pdf CY - Bochum ER - TY - GEN A1 - Medina Méndez, Juan Ali A1 - Dorneanu, Bogdan A1 - Schmidt, Heiko A1 - Arellano-García, Harvey T1 - Revisiting homogeneous modeling with volume averaging theory: structured catalysts for steam reforming and CO2 methanation T2 - Journal of Physics: Conference Series N2 - Progress in the modeling of structured catalysts is crucial for enhancing efficiency and scalability in industrial applications. Extensive research has investigated reactive flows over catalyst surfaces, covering chemical kinetics analysis and (direct) numerical simulations of the complete fluid flow in fixed-bed or structured catalysts. Nonetheless, this comes at a high computational cost. This study focuses on the homogeneous modeling of structured catalysts utilizing volume-averaging theory (VAT) as a more efficient method for representing the behaviour of such systems. We discuss modeling strategies for both 1-D and 3-D simulations. For steady 1-D flow simulations, we assess the influence of simplified gas chemical kinetics versus detailed surface chemistry, comparing with experimental data from the literature for a CO2 methanation processes. We also simulate 3-D flows of a steam reforming process, previously studied in the literature, using models which rely on different assumptions regarding the nature of the porous catalyst. Our findings reveal significant discrepancies based on different modeling assumptions, underscoring the necessity for accurate modeling of permeability and diffusivity tensors in homogeneous models. Y1 - 2024 U6 - https://doi.org/10.1088/1742-6596/2899/1/012004 SN - 1742-6596 VL - 2899/2024 ER - TY - GEN A1 - Medina Méndez, Juan Alí A1 - Dorneanu, Bogdan A1 - Schmidt, Heiko A1 - Arellano-García, Harvey T1 - Revisiting homogeneous modeling with volume averaging theory: structured catalysts for steam reforming and CO2 methanation T2 - Book of Abstracts XXVI Fluid Mechanics Conference (FMC 2024), Warsaw, Poland, September 10-13, 2024 Y1 - 2024 UR - https://www-docs.b-tu.de/fg-stroemungsmodellierung/public/Medina_2024_AbstractFMC26_Catalysts.pdf PB - University of Technology CY - Warsaw ER - TY - GEN A1 - Dorneanu, Bogdan A1 - Mappas, Vassileios A1 - Vassiliadis, Vassilios S. A1 - Arellano-García, Harvey T1 - Novel parametric gradient calculation method for multistage systems with generalized constraints T2 - 2024 AIChE Annual Meeting N2 - Sensitivity and gradient evaluations are essential for understanding the variability of a system subject to changes in input parameters, aiding in applications such as optimization, control, or decision-making processes (Castillo et al., 2008; Logsdon and Biegler, 1989, Horn and Tsai, 1967). Various approaches are available for the gradient evaluation in the simulation of large-scale steady-state systems, utilizing techniques such as automatic differentiation, sensitivity analysis, optimization or machine learning (Amaran et al., 2016). The term large-scale refers to problems with a substantial number of design variables, structural state variables, or constraint functions, or a combination thereof, necessitating significant high-performance parallel computing resources to solve within a reasonable timeframe (Kennedy and Martins, 2014). However, the evaluation of gradients in large-scale multistage systems simulation poses significant challenges due to computational complexity, numerical instability, scalability issues, and the limitations of the traditional differentiation techniques. Additionally, model complexity, sensitivity to noise, and data requirements of machine learning-based approaches further amplify these challenges. Overcoming these obstacles necessitates the development of efficient, scalable and robust gradient evaluation techniques that can effectively handle the characteristics of large-scale systems while offering reliable insights for a wide array of applications. This contribution focuses on re-examining and advancing the evaluation of parametric sensitivities within the context of simulating highly complex, hierarchical multiscale modular systems of very large size. The models being analyzed may necessitate sensitivity evaluations concerning their response to parametric inputs. These evaluations serve not only to test and verify their robustness, but also to integrate them into modular structures within a comprehensive optimization framework. Such an optimization framework aims to enhance system performance based on selected criteria, while simultaneously adhering to essential optimality constraints. While gradient-free optimization methods have been successfully applied to important design problems, their applications typically involve no more than O(102) design variables, and these methods exhibit very poor scalability with the dimensionality of the design variables (Kennedy and Martins, 2014). For large-scale, high-fidelity applications, gradient-based methods are deemed more suitable, although the challenges related to computational time and accuracy need to be addressed. To address these challenges, the use of either sensitivities or appropriately generalized adjoint equations for efficient calculation of constraint and objective functions gradients for generalized multistage systems, irrespective of whether they are dynamic in nature or they are steady-state. The proposed approach adopts a generalized modular strategy suitable for any type of system, starting from a traditional sensitivity-based calculations initially, and subsequently developing a novel generalized adjoint-based method. The resulting algorithm comprises a sequence of forward and backward sweep computational steps, which are entirely equivalent, and serve as a generalization of the adjoint-based calculation methods for gradients of constraints. These methods find application in various numerical analysis computations related to dynamical systems, including optimal control problems. It has to be noted that the model is regarded as a general modular representation of any coupled system, without making a distinction between dynamic or steady-state systems. In this context, a dynamic system is perceived as having state profiles as private internal variables, while interacting with its external environment through the input of initial conditions and parameter values. Its output consists of final conditions or any internal trajectory points that require reporting to the external environment during dynamic simulation. The proposed strategy using a novel adjoint scheme generalizes this approach to any multistage system model, of which the stages need not be of dynamic nature, such as in the use of adjoint equations in optimal control of multistage Differential- Algebraic Equation (DAE) systems (Morison and Sargent, 1986). The choice between the use of the adjoint- and the sensitivity-based approach depends on the balance between the number of constraints/functions requiring gradient evaluation, and the number of states in the underlying dynamical system. The adjoint-based approach may be advantageous when dealing with a smaller number of constraints than state variables that require gradient evaluation, whereas the sensitivity-based approach could be more computationally efficient for a larger number of constraints than state variables in the modular treatment of the underlying dynamic system. The simulation of a multistage system is demonstrated using an example consisting of steady-state feedforward blocks, employing both the sensitivity- and the proposed adjoint-based approach. The results obtained reveal that the numerical values derived from the gradient evaluation are identical for both methods. Therefore, it can be concluded that the newly introduced approach for general multistage sequential systems is entirely non-restrictive. This indicates its effectiveness and applicability, offering flexibility and robustness in gradient evaluation for such systems. Y1 - 2024 UR - https://www.researchgate.net/publication/388185581_Novel_parametric_gradient_calculation_method_for_multistage_systems_with_generalized_constraints ER - TY - GEN A1 - Safdar, Muddasar A1 - Dorneanu, Bogdan A1 - Santos da Silva, Jefferson A1 - Santos Mascarenhas, Artur Jose A1 - Valverde Pontes, Karen A1 - Arellano-García, Harvey T1 - Advancements in CO2 methanation: customized heterogeneous Ni-Perovskite catalyst for sustainable SNG production T2 - Annual Meeting on Reaction Engineering and Electrochemical Processes 2024 Y1 - 2024 UR - https://www.researchgate.net/publication/388185658_Advancements_in_CO2_methanation_Customized_Heterogeneous_Ni-Perovskite_Catalyst_for_Sustainable_SNG_Production ER - TY - GEN A1 - Mappas, Vassileios A1 - Dorneanu, Bogdan A1 - Heinzelmann, Norbert A1 - Schnitzlein, Klaus A1 - Arellano-García, Harvey T1 - A unified modular framework for modeling multiphase reactors T2 - Annual Meeting of Process Engineering and Materials Technology 2024 Y1 - 2024 UR - https://www.researchgate.net/publication/388143505_A_unified_modular_framework_for_modeling_multiphase_reactors ER - TY - GEN A1 - Jafari, Mitra A1 - Shafiee, Parisa A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Towards efficient material design: use of machine learning to predict chemical reactions and retrosynthesis T2 - Annual Meeting of Process Engineering and Materials Technology 2024 Y1 - 2024 UR - https://www.researchgate.net/publication/388143384_Towards_efficient_material_design_Use_of_Machine_Learning_to_predict_chemical_reactions_and_retrosynthesis ER - TY - GEN A1 - Yentumi, Richard A1 - Jurischka, Constantin A1 - Dorneanu, Bogdan A1 - Arellano-García, Harvey T1 - Optimal design of a thermochemical hydrogen storage and release system via the reversible redox of iron oxide/iron T2 - Annual Meeting of Process Engineering and Materials Technology 2024 Y1 - 2024 UR - https://www.researchgate.net/publication/388143925_Thermochemical_Hydrogen_Storage_via_the_Reversible_Reduction_and_Oxidation_of_Metal_Oxides ER -