TY - CHAP A1 - Michailov, Vesselin A1 - Hantelmann, Cord A1 - Kloshek, Alexander T1 - Impulsrührreibschweißen - ein Verfahren mit neuen Möglichkeiten T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 171 EP - 176 PB - DVS Media GmbH CY - Düsseldorf ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Paulinus, Dietmar T1 - Utilisation of aluminium foam sandwich components in welded structures T2 - Welding and Cutting Y1 - 2016 SN - 1612-3433 IS - 5 SP - 317 EP - 325 ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Paulinus, Dietmar T1 - Einsatz von Aluminiumschaum-Sandwich-Bauteilen in Schweißkonstruktionen T2 - Schweissen und Scheiden Y1 - 2016 SN - 0036-7184 VL - 68 IS - 3 SP - 106 EP - 114 ER - TY - CHAP A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Paulinus, Dietmar T1 - Einsatz von Aluminiumschaumsandwich in Schweißkonstruktionen T2 - DVS Congress 2014, Große Schweißtechnische Tagung, DVS-Studentenkongress, Vorträge der Veranstaltungen in Berlin am 15. und 16. September 2014 Y1 - 2014 SN - 978-3-945023-03-7 PB - DVS Media GmbH CY - Düsseldorf ER - TY - GEN A1 - Kondratyev, Alex A1 - Morozova, Iuliia A1 - Golubev, Iurii A1 - Hantelmann, Cord A1 - Naumov, Alexander A1 - Michailov, Vesselin T1 - Микроструктура и механические свойства швов после различных режимов импульсной сварки Al – Mg – Si сплавов трением с перемешиванием T1 - Untersuchung von Mikrostruktur und mechanischen Eigenschaften der Al-Mg-Si Legierungen beim Impuls-Rührreibschweißen mit unterschiedlichen Schweißparametern T2 - Metallovedenie i termicheskaya obrabotka metallov N2 - Welded joints of aluminum alloy 6082-T6 formed by the method of pulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization. KW - pulse friction stir welding KW - power and frequency of pulses KW - microstructure KW - mechanical properties KW - Al – Mg – Si alloy Y1 - 2017 SN - 0026-0819 IS - 11 SP - 25 EP - 30 ER - TY - CHAP A1 - Golubev, Iurii A1 - Doynov, Nikolay A1 - Hantelmann, Cord A1 - Michailov, Vesselin T1 - Wärmequellemodell und FE-Temperaturfeldsimulation für das Rührreibschweißen T2 - DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vorträge der Veranstaltungen in Düsseldorf vom 26. bis 29. September 2017 KW - Wärmequellemodell KW - FE-Temperaturfeldsimulation KW - Rührreibschweißen Y1 - 2017 SN - 978-3-96144-008-5 SP - 112 PB - DVS Media CY - Düsseldorf ER - TY - GEN A1 - Shapovalov, Oleg A1 - Hantelmann, Cord A1 - Michailov, Vesselin A1 - Kodgaspirov, G. E. T1 - Influence of welding method on fatigue strength and destruction character of aluminum foam sandwiches T2 - Deformatsiya i Razrushenie materialov N2 - An influence of the arc welding and the laser welding on fatigue properties and destruction mechanisms of aluminum foam sandwich has been studied. It was found that specimens made by the arc welding had the best fatigue strength. Comparative results of four point bending fatigue tests of the non-welded specimens such as butt welded joints made by different welding methods are presented. KW - aluminum foam KW - metallic foam sandwich KW - fatigue strength KW - four-point bending KW - butt welded joint Y1 - 2017 UR - http://www.nait.ru/journals/number.php?p_number_id=2612 SN - 1814-4632 IS - 5 ER - TY - CHAP A1 - Golubev, Iurii A1 - Morozova, Iuliia A1 - Naumov, Anton A1 - Hantelmann, Cord A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Numerical simulation and experimental investigation on Numerical simulation of 6082-T6 aluminum alloy T2 - Materials Science and Technology 2017, (MS&T17), Pittsburgh, Pennsylvania, USA, October 8-12, 2017, volume 2 N2 - The series of impulse friction stir welding (IFSW) experiments for aluminum alloy 6082-T6 butt joints was performed to obtain micrographs, tensile and hardness test samples and to receive the validation data for a numerical model of the process. Impulse force and frequency were varied to determine the effect of individual process parameters on microstructure evolution and mechanical properties of the welded butt joints. A three-dimensional model was established to simulate temperature distribution, heat generation and contact state between the tool and the workpiece during IFSW. Based on the numerical simulation, the influence of the impulses on heat input, maximum weld temperatures and contact state was found. The combination of impulse force and frequency effected the grain refinement. The influence of impulses on the elongation and hardness of the welded joints during IFSW were determined. KW - Aluminum alloy KW - Numerical simulation Y1 - 2017 SN - 978-1-5108-5058-3 SP - 987 EP - 994 PB - Curran Associates, Inc. CY - Red Hook, NY ER - TY - CHAP A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf T1 - Einsatz von Aluminiumschaumsandwich in Schweißkonstruktionen T2 - DVS Congress 2017 : Große Schweißtechnische Tagung : DVS-Studentenkongress : Vorträge der Veranstaltungen in Düsseldorf vom 26. bis 29. September 2017 N2 - In der vorgestellten Arbeit wird die Anwendbarkeit von Aluminiumschaumsandich in Schweißkonstruktionen vorgestellt. Systematische Betrachtungen zur Schweißbarkeit mittels Laserstrahlschweißen, MSG - Kurzlichtbogen und Rührreibschweißen sowohl im geschäumten als auch im ungeschäumten Zustand werden beschrieben. Dazu wurden verschiedene Knotenformen wie I-Stoß- bzw. T-Stoßverbindungen hergestellt und deren mechanischtechnologische Eigenschaften ermittelt. Neben der quasistatischen Prüfung, wurde jede Ausführungsform des Knotens auf deren Schwingfestigkeit hin geprüft und die Anwendbarkeit bestehender Regelwerke wie die FKMRichtlinie oder der Eurocode 9 für die Nachweisführung betrachtet. Die Ergebnisse sind abschließend in einem Gestaltungskatalog als Hilfsmittel für den Konstrukteur zusammengefasst. Parallel dazu wurden die experimentellen Untersuchungen mittels FEM begleitet. Es wird die FE-Modellentwicklung für die Berechnung des Sandwichverbundes an sich als auch von Fügeknoten dargestellt wie auch die Modellvalidierung mit einem Musterbauteil aus einer Hubarbeitsbühne. KW - Aluminiumschäume KW - FE-Simulation KW - Aluminiumschaumsandwich KW - Schweißkonstruktionen Y1 - 2017 SN - 978-3-96144-008-5 SP - 173 PB - DVS Media CY - Düsseldorf ER - TY - GEN A1 - Kondrat’ev, Sergey A1 - Morozova, Iuliia A1 - Golubev, Iurii A1 - Hantelmann, Cord A1 - Naumov, Alexander A1 - Michailov, Vesselin T1 - Microstructure and Mechanical Properties of Welds of Al – Mg – Si Alloys After Different Modes of Impulse Friction Stir Welding T2 - Metal Science and Heat Treatment N2 - Welded joints of aluminum alloy 6082-T6 formed by the method of impulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization. KW - impulse friction stir welding KW - power and frequency of pulses KW - microstructure KW - mechanical properties KW - Al – Mg – Si alloy Y1 - 2018 UR - https://link.springer.com/article/10.1007%2Fs11041-018-0213-6 U6 - https://doi.org/10.1007/s11041-018-0213-6 SN - 0026-0673 VL - 59 IS - 11-12 SP - 697 EP - 702 ER - TY - GEN A1 - Michailov, Vesselin A1 - Fritzsche, Sebastian A1 - Hantelmann, Cord A1 - Ossenbrink, Ralf T1 - Aluminium foam sandwiches for lightweight structures T2 - Metal Science and Heat Treatment N2 - The properties of sandwiches with aluminum foam and the special features of their use in lightweight welded structures are determined. The weldability of such sandwiches in foamed and non-foamed conditions is analyzed under friction stir welding, laser beam welding and short arc welding in protective gas. The process and mechanical properties of the welds are studied. The results are generalized in a catalog that may be useful for materials scientists and designers. KW - aluminum KW - aluminum foam KW - welded structures KW - composite materials KW - structure KW - mechanical properties Y1 - 2018 U6 - https://doi.org/10.1007/s11041-018-0238-x SN - 1573-8973 VL - 60 IS - 1-2 SP - 44 EP - 49 ER - TY - GEN A1 - Golubev, Iurii A1 - Morozova, Iuliia A1 - Naumov, Anton A1 - Hantelmann, Cord A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Numerical Simulation and Experimental Investigation on Impulse Friction Stir Welding of 6082-T6 Aluminum Alloy T2 - Papers from Materials Science and Technology 2017 (MS&T17), October 8 – 12, 2017, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania USA N2 - The series of impulse friction stir welding (IFSW) experiments for aluminum alloy 6082-T6 butt joints was performed to obtain micrographs, tensile and hardness test samples and to receive the validation data for a numerical model of the process. Impulse force and frequency were varied to determine the effect of individual process parameters on microstructure evolution and mechanical properties of the welded butt joints. A three-dimensional model was established to simulate temperature distribution, heat generation and contact state between the tool and the workpiece during IFSW. Based on the numerical simulation, the influence of the impulses on heat input, maximum weld temperatures and contact state was found. The combination of impulse force and frequency effected the grain refinement. The influence of impulses on the elongation and hardness of the welded joints during IFSW were determined. Y1 - 2017 UR - https://www.researchgate.net/publication/326434324_Numerical_Simulation_and_Experimental_Investigation_on_Impulse_Friction_Stir_Welding_of_6082-T6_Aluminum_Alloy U6 - https://doi.org/10.7449/2017/mst_2017_987_994 SP - 987 EP - 994 ER - TY - GEN A1 - Shapovalov, Oleg A1 - Kodzhaspirov, Georgii A1 - Hantelmann, Cord A1 - Michailov, Vesselin T1 - Effect of a Welding Method on the Fatigue Strength and Fracture of Foam–Aluminum Sandwiches T2 - Russian Metallurgy (Metally) N2 - The influence of argon-arc welding and laser welding on the fatigue properties and the fracture of a foam–aluminum sandwich is studied. Argon-arc-welded samples are found to have the highest fatigue strength. KW - aluminum sandwich KW - fatigue strength KW - four-point bending KW - butt weld Y1 - 2019 UR - https://link.springer.com/journal/11505/2019/10/page/2 U6 - https://doi.org/10.1134/S0036029519100239 SN - 0036-0295 VL - Vol. 2019 IS - 10 SP - 1063 EP - 1066 ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf T1 - Entwicklung geschweißter Konstruktionen aus Aluminiumsandwich T2 - DVS Congress 2022, Große Schweißtechnische Tagung, DVS Campus ; Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 ; (Langfassungen der Beiträge auf USB-Karte) N2 - Im vorgestellten Projekt wurden werkstoff- und konstruktionsgerechte Knotenformen aus Aluminiumschaumsandwich gestaltet und mit unterschiedlichen Schweißverfahren, wie dem Metall-Inertgas-Schweißen und dem Rührreibschweißen, gefügt und geprüft. In umfangreichen Untersuchungen wurden die Knoten, der Sandwichverbund und die Einzelkomponenten des Sandwich, Schaum und Decklagen, anhand der statischen Festigkeit und Schwingfestigkeit bewertet. Zusätzlich wurden innere Schädigungsmechanismen betrachtet. Mit experimentellen und numerischen Nachweismethoden konnte die anwendungssichere Knotengestaltung, -anbindung und -berechnung der unterschiedlichen Verbindungstypen umgesetzt werden. Die Ergebnisse wurden im Rahmen der Nachweisführung gegenübergestellt und hinsichtlich eines praxisgerechten Einsatzes nach FKM-Richtlinie bzw. Eurocode9 bewertet. Mit den ermittelten Ergebnissen wurde die bisherige Gestaltungs- und Fügerichtlinie um neue Verbindungstypen erweitert. Y1 - 2022 SN - 978-3-96144-189-1 SP - 245 EP - 251 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Pöge, Matthias A1 - Vogelsang, Jörg A1 - Cramer, Heidi T1 - Geschweißte Konstruktionen aus Aluminiumschaumsandwich T1 - Welded structures made of aluminium foam sandwich T2 - Jahrbuch Schweisstechnik 2025 : ein Leitfaden durch die Branche der Füge-, Trenn- und Beschichtungstechnik N2 - Im vorgestellten Projekt wurden werkstoff- und konstruktionsgerechte Knotenformen aus Aluminiumschaumsandwich (engl. Aluminium Foam Sandwich, AFS) gestaltet und mit unterschiedlichen Schweißverfahren wie dem Metall-Inertgasschweißen und dem Rührreibschweißen gefügt sowie geprüft. Im Rahmen der Arbeiten stand dabei die schweißtechnische Verarbeitung von AFS mit anderen Produkten, wie den Strangpressprofilen oder dem Aluminiumvollmaterial, und deren Beanspruchbarkeit im Vordergrund. In umfangreichen Untersuchungen wurden hierzu sowohl die Verbindungsknoten selbst als auch der Sandwichverbund und die Einzelkomponenten des Sandwich, Schaum und Decklagen, anhand der statischen Festigkeit und Schwingfestigkeit bewertet. Zusätzlich wurden innere Schädigungsmechanismen betrachtet. Mit experimentellen und numerischen Nachweismethoden konnte die anwendungssichere Knotengestaltung, -anbindung und -berechnung der unterschiedlichen Verbindungstypen umgesetzt werden. Die Ergebnisse wurden im Rahmen der Nachweisführung gegenübergestellt und hinsichtlich eines praxisgerechten Einsatzes nach FKM-Richtlinie bzw. Eurocode9 bewertet. Mit den ermittelten Ergebnissen wurde die bisherige Gestaltungs- und Fügerichtlinie um neue Verbindungstypen erweitert N2 - In this project presentation material- and construction-specific node shapes were designed from aluminium foam sandwich (AFS) and joined and tested using different welding processes, such as metal-inert gas (MIG) welding and friction stir welding. Within the scope of the work, the focus was on the welding processing with other products such as extruded profiles or solid aluminium material and their stress resistance. Extensive tests were performed to assess the static strength and fatigue strength of the joint nodes themselves, the sandwich composite and the individual components of the sandwich, foam and cover layers. In addition, internal damage mechanisms were considered. With experimental and numerical verification methods, the application-safe node design, connection and calculation of the different connection types could be implemented. The results were compared within the framework of the verification and evaluated with regard to a practical application according to the FKM guideline and Eurocode9. With the obtained results, the previous design and joining guideline was extended to include new connection types. KW - Festigkeit KW - Reibschweißen KW - Richtlinien KW - Schutzgasschweißen KW - Werkstofffragen KW - Werkstoffkombination KW - strength KW - friction welding KW - guidelines KW - gas-shielded arc welding KW - material questions KW - material combinations Y1 - 2024 SN - 978-3-96144-271-3 SP - 356 EP - 370 PB - DVS Media CY - Düsseldorf ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Pöge, Matthias A1 - Vogelsang, Jörg A1 - Cramer, Heidi T1 - Geschweißte Konstruktionen aus Aluminiumschaumsandwich T2 - Schweißen und Schneiden N2 - Im vorgestellten Projekt wurden werkstoff- und konstuktionsgerechte Knotenformen aus Aluminiumschaumsandwich (engl. Aluminium Foam Sandwich, AFS) gestaltet und mit unterschiedlichen Schweißverfahren wie dem Metall-Inertgasschweißen und dem Rührreibschweißen gefügt und geprüft. Im Rahmen der Arbeiten stand dabei die schweißtechnische Verarbeitung von AFS mit anderen Produkten, wie den Strangpressprofilen oder dem Aluminiumvollmaterial, und deren Beanspruchbarkeit im Vordergrund. In umfangreichen Untersuchungen wurden hierzu sowohl die Verbindugsknoten selbst als auch der Sandwichverbund und die Einzelkomponenten des Sandwich, Schaum und Decklagen, anhand der statischen Festigkeit und Schwingfestigkeit bewertet. Zusätzlich wurden innere Schädigungsmechanismen betrachtet. Mit experimentellen und numerischen Nachweismethoden konnte die anwendungssichere Knotengestaltung, -anbindung und -berechnung der unterschiedlichen Verbindungstypen umgesetzt werden. Die Ergebnisse wurden im Rahmen der Nachweisführung gegenübergestellt und hinsichtlich eines praxisgerechten Einsatzes nach FKM-Richtlinie bzw. Eurocode9 bewertet. Mit den ermittelten Ergebnissen wurde die bisherige Gestaltungs- und Fügerichtlinie um neue Verbindungstypen erweitert. KW - Festigkeit KW - Reibschweißen KW - Richtlinien KW - Schutzgasschweißen KW - Werkstofffragen KW - Werkstoffkombination Y1 - 2023 SN - 0036-7184 VL - 75 IS - 12 SP - 912 EP - 922 ER -