TY - GEN A1 - Dudek, Piotr T. A1 - Lupina, Grzegorz A1 - Kozłowski, Grzegorz A1 - Zaumseil, Peter A1 - Bauer, Jakob A1 - Fursenko, Oksana A1 - Dabrowski, Jarek Marek A1 - Schmidt, R. A1 - Lippert, Gunther A1 - Müssig, Hans-Joachim A1 - Schröder, Thomas A1 - Schmeißer, Dieter A1 - Zschech, Ehrenfried T1 - Atomic-scale engineering of future high-k dynamic random access memory dielectrics: The example of partial Hf substitution by Ti in BaHfO3 T2 - Journal of Vacuum Science and Technology / B Y1 - 2011 SN - 2166-2754 VL - 29 IS - 1 ER - TY - CHAP A1 - Dudek, Peter A1 - Lupina, Grzegorz A1 - Kozłowski, Grzegorz A1 - Dabrowski, Jarek Marek A1 - Lippert, Gunther A1 - Müssig, Hans-Joachim A1 - Schmeißer, Dieter A1 - Schroeder, Thomas T1 - Band structure and electrical properties of MBE grown HfO2 - based alkaline earth perovskites T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 45 N2 - Ultra thin dielectric films (<20 nm) deposited on TiN electrodes are interesting for MIM capacitor application. High capacitance density and dielectric permittivity must be accompanied by extremely low leakage currents (10−8 A/cm2) at bias 0.5 V. To achieve such low leakage currents, high band gap and proper band alignment is required. Occupied electronic states can be probed with standard laboratory photoemission methods. Probing of unoccupied states is more challenging. Synchrotron based PES in combination with XAS forms a powerful method to study the band alignment. ASAM end station located at the U 49/2 PGM 2 beamline of BESSY II (Berlin) offers excellent conditions for performing such measurements. We investigated HfO2 - based alkaline earth perovskite - BaHfO3 with subsequent admixture of TiO2, resulting in formation of BaHf0.5Ti0.5O3 compound. The analysis of data indicates that band gap for HfO2 is similar to BaHfO3 and amounts 5.8 eV; for BaHf0.5Ti0.5O3 it decreases to 3.8 eV. We conclude that the addition of TiO2 to BaHfO3 increases significantly the dielectric permittivity but also impacts the band gap alignment. The conduction band offset shrinks, influencing the leakage current behavior. Y1 - 2010 UR - http://www.dpg-verhandlungen.de/year/2010/conference/regensburg/part/ds/session/24/contribution/4 SN - 0420-0195 SP - S. 232 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Lupina, Grzegorz A1 - Dabrowski, Jarek Marek A1 - Formanek, Peter A1 - Schmeißer, Dieter A1 - Sorge, Roland A1 - Wenger, Christian A1 - Zaumseil, Peter A1 - Müssig, Hans-Joachim T1 - Solid-state reaction between Pr and SiO2 studied by photoelectron spectroscopy and ab initio calculations T2 - Materials Science in Semiconductor Processing N2 - We report on the structural and electrical properties of Pr-based high-k dielectric films fabricated by solid-state reaction between metallic Pr and SiO2 underlayers. A non-destructive depth profiling using synchrotron radiation excited photoelectron spectroscopy (SR-PES), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were employed to examine the chemical composition and microstructure. Ab initio calculations were done to gain insight into the physical processes involved. SR-PES results indicate that Pr deposition at room temperature (RT) leads to the formation of a Pr silicide and a Pr oxide, what is in good agreement with the scenario expected from ab initio calculations. As revealed by TEM and electrical measurements, oxidation of the reacted structures, followed by annealing, results in a stacked dielectric composed of a SiO2-based buffer with an enhanced permittivity and a Pr silicate film with a high dielectric constant. The leakage current density of 10-4 A/cm2 was measured for stacks with capacitance equivalent thickness (CET) of 1.5 nm prepared by evaporation of the Pr layer on a 1.8 nm SiO2 film, followed by oxidation in air ambient and annealing in N2 atmosphere. The capacitance-voltage (C-V) curves exhibit a large flatband voltage (VFB) shift indicating the presence of a positive charge in the stack. Switching away from the Al contacts to Au gate electrodes introduces a significant reduction of the VFB by 1.3 eV, what is much more than the change expected from the work function difference between Al and Au (not, vert, similar0.9 eV). This in turn implies that VFB is strongly affected by the gate interface electrode. KW - High-k dielectrics KW - Photoelectron spectroscopy KW - Interface reaction Y1 - 2004 SN - 1369-8001 VL - 7 IS - 4-6 SP - 215 EP - 220 ER - TY - GEN A1 - Müssig, Hans-Joachim A1 - Dabrowski, Jarek Marek A1 - Wenger, Christian A1 - Lupina, Grzegorz A1 - Sorge, Roland A1 - Formanek, Peter A1 - Zaumseil, Peter A1 - Schmeißer, Dieter T1 - Ultrathin Dielectric Films Grown by Solid Phase Reaction of Pr with SiO2 T2 - MRS Proceedings Y1 - 2004 SN - 1946-4274 VL - 811 ER - TY - GEN A1 - Lupina, Grzegorz A1 - Schroeder, Thomas A1 - Dabrowski, Jarek Marek A1 - Schmeißer, Dieter A1 - Hoffmann, Patrick T1 - Praseodymium silicate layers with atomically abrupt interface on Si(100) T2 - Applied Physics Letters Y1 - 2005 SN - 0003-6951 VL - 87 IS - 5 ER - TY - JOUR A1 - Lupina, Grzegorz A1 - Schroeder, Thomas A1 - Schmeißer, Dieter A1 - Dabrowski, Jarek Marek T1 - Praseodymium Silicate Films on Si(100) for Gate Dielectric Applications: Physical and Electrical Characterization Y1 - 2006 ER - TY - CHAP A1 - Lippert, Gunther A1 - Dabrowski, Jarek Marek A1 - Costina, Ioan A1 - Lupina, Grzegorz A1 - Ratzke, Markus A1 - Zaumseil, Peter A1 - Müssig, Hans-Joachim T1 - Morphology and Composition of Praseodymium Based High-k Materials and Their Relevance to Dielectric Properties of Thin-Films Y1 - 2007 ER - TY - GEN A1 - Zöllner, Marvin Hartwig A1 - Dabrowski, Jarek Marek A1 - Zaumseil, Peter A1 - Giussani, A. A1 - Schubert, Markus Andreas A1 - Lupina, Grzegorz A1 - Wilkens, Henrik A1 - Wollschläger, Joachim A1 - Bäumer, Marcus A1 - Reichling, M. A1 - Schröder, Thomas T1 - On the unusual stacking behavior of twin-free, type B oriented CeO2(111) films on hexagonal Pr2O3(0001) / Si(111) systems T2 - Physical Review Y1 - 2012 UR - http://link.aps.org/doi/10.1103/PhysRevB.85.035302 U6 - https://doi.org/10.1103/PhysRevB.85.035302 SN - 1098-0121 VL - 85 IS - 3 SP - 035302 EP - 035311 ER - TY - GEN A1 - Lippert, Gunther A1 - Dabrowski, Jarek Marek A1 - Oberbeck, Lars A1 - Schroeder, Uwe A1 - Costina, Ioan A1 - Lupina, Grzegorz A1 - Ratzke, Markus A1 - Zaumseil, Peter A1 - Müssig, Hans-Joachim T1 - Morphology and composition of selected high-k materials and their relevance to dielectric properties of thin films T2 - Journal of the electrochemical society Y1 - 2008 U6 - https://doi.org/10.1149/1.2875741 SN - 1945-7111 VL - 155 IS - 5 SP - G97 EP - G114 ER - TY - CHAP A1 - Lupina, Grzegorz A1 - Schroeder, Thomas A1 - Dabrowski, Jarek Marek A1 - Schmeißer, Dieter A1 - Müssig, Hans-Joachim T1 - Ti-doping of Pr silicate layers for high-k dielectrics applications T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - Near-term downscaling of the metal-oxide-semiconductor field-effect transistors (MOSFETs) requires the replacement of the SiO2 gate oxide with a material having a higher dielectric constant. Recent studies indicate that silicate materials are the most promising candidates; among them are Pr silicates. Applying a combination of x-ray photoelectron spectroscopy (XPS), electrical measurements (C-V), and ab initio calculations, we investigated the effect of thin Ti doping on the structural and electrical properties of the gate stacks composed of a Pr silicate film and a SiO2-based interfacial buffer layer. Metallic Ti was deposited at room temperature after the formation of the Pr silicate dielectric. The resulting layered structures were annealed under ultra-high vacuum (UHV) at various temperatures between 70∘C and 880∘C. XPS indicates that the evaporated layer preserves its metallic character over the whole range of UHV annealing temperatures. Synchrotron radiation XPS at BESSY II shows that large amounts of Ti atoms incorporated into the Pr silicate remain metallic even after air exposure at room temperature. Annealing in nitrogen ambient at 300∘C leads to the oxidation of these atoms so that a mixed Pr:Ti silicate is formed. We show that the so formed dielectrics exhibit an improved equivalent oxide thickness and a reduced density of interface states. KW - high-k KW - X-ray photoelectron spectroscopy KW - ab inito calculations KW - Capacitance-voltage measurements KW - Pr silicate Y1 - 2005 UR - http://www.dpg-verhandlungen.de/year/2005/conference/berlin/part/df/session/6/contribution/5?lan=en PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -