TY - GEN A1 - Mertin, Chris A1 - Naumov, Andreas A1 - Mosecker, Linda A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum T2 - Key Engineering Materials Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/KEM.611-612.1429 SN - 1662-9795 SN - 1013-9826 VL - 611-612 SP - 1429 EP - 1436 ER - TY - GEN A1 - Henke, Thomas A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process T2 - Materials Science Forum Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/MSF.762.354 SN - 1662-9752 VL - 762 SP - 354 EP - 359 ER - TY - GEN A1 - Voswinckel, Holger A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Process Limits of Stretch and Shrink Flanging by Incremental Sheet Metal Forming T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.45 SN - 1662-9795 VL - 549 SP - 45 EP - 52 ER - TY - GEN A1 - Russig, Christoph A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Experimental Investigations of Different Tool Concepts for Rotary Peen Forming T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.53 SN - 1662-9795 VL - 549 SP - 53 EP - 60 ER - TY - GEN A1 - Mosecker, Linda A1 - Göttmann, Alexander A1 - Saeed-Akbari, Alireza A1 - Bleck, Wolfgang A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.549.372 SN - 1662-9795 VL - 549 SP - 372 EP - 380 ER - TY - GEN A1 - Henke, Thomas A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Die and process design for hot forging of a gear wheel – a case study T2 - Key Engineering Materials Y1 - 2013 U6 - https://doi.org/10.4028/www.scientific.net/KEM.554-557.307 SN - 1662-9795 VL - 554-557 SP - 307 EP - 316 ER - TY - GEN A1 - Güvenç, Onur A1 - Henke, Thomas A1 - Laschet, Gottfried A1 - Böttger, Bernd A1 - Apel, Markus A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Modeling of Static Recrystallization Kinetics by Coupling Crystal Plasticity FEM and Multiphase Field Calculations T2 - Computer Methods in Material Science Y1 - 2013 SN - 1641-8581 VL - 13 IS - 2 SP - 368 EP - 374 ER - TY - GEN A1 - Göttmann, Alexander A1 - Bailly, David A1 - Bergweiler, Georg A1 - Bambach, Markus A1 - Stollenwerk, Jochen A1 - Hirt, Gerhard A1 - Loosen, P. T1 - A novel approach for temperature control in ISF supported by laser and resistance heating T2 - The International Journal of Advanced Manufacturing Technology Y1 - 2013 U6 - https://doi.org/10.1007/s00170-012-4640-z SN - 0268-3768 SN - 1433-3015 VL - 67 IS - 9 SP - 2195 EP - 2205 ER - TY - GEN A1 - Henke, Thomas A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model T2 - Advanced Materials Research Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/AMR.922.254 SN - 1662-8985 SN - 1022-6680 VL - 922 SP - 254 EP - 259 ER - TY - GEN A1 - Bambach, Markus A1 - Pietryga, Michael P. A1 - Mikloweit, Alexander A1 - Hirt, Gerhard A1 - Karhausen, Kai-Friedrich T1 - Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength T2 - Materials Science Forum Y1 - 2014 U6 - https://doi.org/10.4028/www.scientific.net/MSF.783-786.644 SN - 1662-9752 SN - 0255-5476 VL - 783-786 SP - 644 EP - 650 ER - TY - GEN A1 - Russig, Christoph A1 - Bambach, Markus A1 - Hirt, Gerhard A1 - Holtmann, N. T1 - Shot peen forming of fiber metal laminates on the example of GLARE® T2 - International Journal of Material Forming Y1 - 2014 U6 - https://doi.org/10.1007/s12289-013-1137-8 SN - 1960-6206 SN - 1960-6214 VL - 7 IS - 4 SP - 425 EP - 438 ER - TY - GEN A1 - Henke, Thomas A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging T2 - CIRP Annals - Manufacturing Technology Y1 - 2013 U6 - https://doi.org/10.1016/j.cirp.2013.03.121 SN - 0007-8506 SN - 1726-0604 VL - 62 IS - 1 SP - 287 EP - 290 ER - TY - CHAP A1 - Seuren, Simon A1 - Willkomm, Johannes A1 - Bücker, Hans A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling T2 - Metal Forming 2012, proceedings of the 14th International Conference on Metal forming, September 16 - 19, 2012, Krakow, Poland Y1 - 2012 SN - 978-3-514-00797-0 SP - 91 EP - 94 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas A1 - Heppner, Stephan A1 - Xiong, Wei A1 - Hirt, Gerhard T1 - Konzepte zur integrierten Modellierung von Gefüge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen T2 - Tagungsband, 13. RoundTable Simulation in der Umformtechnik, 23. bis 26. April 2012, Bamberg Y1 - 2012 SN - 978-3-9813814-1-2 SP - 117 EP - 139 PB - Simufact Engineering GmbH CY - Hamburg ER - TY - CHAP A1 - Göttmann, Alexander A1 - Korinth, Marcus Christopher A1 - Schäfer, V. A1 - Taleb-Araghi, Babak A1 - Bambach, Markus A1 - Hirt, Gerhard ED - Schuh, Günther ED - Neugebauer, Reimund ED - Uhlmann, Eckart T1 - Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming T2 - Future Trends in Production Engineering, Proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011 Y1 - 2013 SN - 978-3-642-24490-2 U6 - https://doi.org/10.1007/978-3-642-24491-9_28 SP - 287 EP - 295 PB - Springer CY - Berlin [u.a.] ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bambach, Markus A1 - Seuren, Simon A1 - Henke, Thomas T1 - Current aspects of modelling in hot rolling T2 - Conference papers, 4th International Conference on Thermomechanical Processing of Steels : 10 - 12 September 2012, Sheffield, UK Y1 - 2012 SP - 36 EP - 38 PB - IOM Communications CY - London ER - TY - CHAP A1 - Seuren, Simon A1 - Romans, T. A1 - Recker, D. A1 - Rosenstock, D. A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Void closure in heavy ingots – a comparison of rolling and open die forging T2 - Proceedings, ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging, 3 - 7 June 2012, Aachen, Germany, Eurogress Y1 - 2012 N1 - DVD-ROM SP - 1 EP - 5 CY - Aachen ER - TY - GEN A1 - Laugwitz, Marvin A1 - Voswinckel, Holger A1 - Hirt, Gerhard A1 - Bambach, Markus T1 - Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging T2 - International Journal of Material Forming Y1 - 2018 U6 - https://doi.org/10.1007/s12289-017-1356-5 SN - 1960-6206 SN - 1960-6214 VL - 11 IS - 4 SP - 471 EP - 477 ER - TY - GEN A1 - Bambach, Markus A1 - Voswinckel, Holger A1 - Hirt, Gerhard T1 - A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming T2 - Procedia Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.proeng.2014.10.325 SN - 1877-7058 VL - 81 SP - 2305 EP - 2310 ER - TY - GEN A1 - Lohmar, Johannes A1 - Bambach, Markus A1 - Hirt, Gerhard T1 - Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel T2 - Procedia Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.proeng.2014.09.162 SN - 1877-7058 N1 - 11th International Conference on Technology of Plasticity, ICTP 2014, 19 - 24 October 2014, Nagoya, Japan VL - 81 SP - 268 EP - 273 ER - TY - GEN A1 - Imran, Muhammad A1 - Afzal, Muhammad Junaid A1 - Buhl, Johannes A1 - Bambach, Markus A1 - Dunlap, Anthony A1 - Schwedt, Alexander A1 - Aretz, Anke A1 - Wang, Shuhan A1 - Lohmar, Johannes A1 - Hirt, Gerhard T1 - Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling T2 - Production Engineering Y1 - 2020 U6 - https://doi.org/10.1007/s11740-019-00932-0 SN - 1863-7353 SN - 0944-6524 VL - 14 IS - 1 SP - 5 EP - 16 ER -