TY - GEN A1 - Amirli, Samir A1 - Fritzsche, Pascal A1 - Abbasov, Ilgar A1 - Wichmann, Steffen A1 - Simon, Sylvio A1 - Amirov, Fariz A1 - Mammadov, Arastun T1 - The İmpact of High Speed Mechanical Processing Efficiency on the Production Process T1 - Влияние высокоскоростной механической обработки на производственный процесс T2 - HERALD of the Azerbaijan Engineering Academy N2 - The main purpose of the article is to increase productivitiy, reduce processing time and the same time increase the cutting speed. The results are also displayed in Excel using a number of cutting parameters. For this purpose, the article shows the results of both high-speed milling and high-speed turning of a machine with different types of tools, as well as processing of one tool on different types of machines. Unlike other machines, in general, the work on the machines of universal processing centers turned out to be more productive. The feed rate of the machine tools is the focus area here. If we increase cutting values, then the tool life is reduced and that leads to higher tool costs. With universal high-performance machines we cannot save costs for tools (we can only save machine tool costs). Compared to universal high-performance machines, we can save tool costs with Universal Machining Center. Therefore, it is suggested to the machining with the universal machining center, although the machining time and cutting time is faster with the universal high-performance machine. N2 - В статье показаны результаты как высокоскоростной фрезерной, так и высокоскоростной токарной обработки станка с разными типами инструментов, а также обработки одного инструмента на разных типах станков. В отличие от других станков, работа на станках универсальных обрабатывающих центров оказалась более производительной. В центре внимания здесь скорости подачи станков. Если мы увеличиваем параметры резания, то срок службы инструмента снижается, что приводит к увеличению затрат на инструмент. С универсальными высокопроизводительными станками мы не можем сэкономить на инструментах (мы можем сэкономить только на станках). По сравнению с универсальными высокопроизводительными станками, мы можем сэкономить на инструментальных средствах с помощью универсального обрабатывающего центра. Поэтому рекомендуется выполнять обработку на универсальном обрабатывающем центре, хотя время обработки и время резки меньше на универсальном высокопроизводительном станке. KW - Energy efficiency KW - High speed mechanical processing KW - Production KW - Neseff Y1 - 2022 U6 - https://doi.org/10.52171/2076-0515_2022_14_01_41_51 SN - 2076-0515 SN - 2789-8245 VL - 14 IS - 1 SP - 41 EP - 51 ER - TY - GEN A1 - Simon, Sylvio A1 - Abbasov, Ilgar A1 - Fritzsche, Pascal Dirk T1 - Influence of optimization of cutting parameters and tools in turning roughing on surface roughness and energy efficiency T2 - "Machine -building and Energy: New Concepts and Technologies" I nternational S cientific -practical C onference MATER IALS, December 2-3, 2021, AzTU, Baku, Azerbaijan N2 - This paper examines the surface roughness and power consumption of the machine when using different inserts and cutting parameters in rough turning. For this purpose, the surface quality of the parts, cutting parameters at different levels (cutting speed, feed rate, depth of cut) and optimal tools that influence the energy when machining S355JR steel material of different cutting tools were used in the turning process. KW - Turning KW - roughing KW - surface roughness KW - energy efficiency Y1 - 2021 UR - https://www.researchgate.net/publication/366517207_Machine_-building_and_Energy_New_Concepts_and_Technologies_I_nternational_S_cientific_-practical_C_onference_MATER_IALS SP - 12 EP - 14 PB - Universität CY - Baku ER - TY - RPRT A1 - Bürger, Andreas A1 - Simon, Sylvio A1 - Hernschier, Stephan A1 - Fritzsche, Pascal A1 - Magister, Jan A1 - Fritsch, Tim T1 - Untersuchungen zur Eigenerwärmung von Labyrinthdichtringen in Tragrollen N2 - Labyrinthdichtringe (LDR) in Tragrollen von Gurtförderern bestehen aus mehreren Elementen welche im Betrieb aneinander "reiben" sollten (LDR außen, Fett, LDR innen) und sich infolge dessen erwärmen können. Eine weitere Erwärmung kann durch die wirkenden Kräfte und Wettereinflüsse erfolgen. Die Erwärmung überträgt sich auf das Schmiermittel und beeinflusst damit die Schmierfähigkeit sowie das Fließverhalten des Schmiermittels. Der Labyrinthdichtring einer Tragrolle wurde für die Untersuchung der Eigenerwärmung mit Temperatursensoren ausgerüstet. Auf einem Tragrollenprüfstand der BTU Cottbus-Senftenberg wurden während mehrerer Langzeitversuche die Temperaturen gemessen und aufgezeichnet. Die aufgenommenen Temperaturkurven zeigen den typischen Verlauf eines Verzögerungsgliedes 1.Ordnung wobei die Aufheiz- und Abkühlkurven unterschiedliche Zeitkonstanten aufweisen. Außerdem zeigen sich teilweise kurz vor dem Übergang zum stationären Zustand weitere kurzzeitige Temperaturerhöhungen. Die Untersuchungen dienen als Vorarbeiten für weitere Messungen und Optimierungen an Labyrinthdichtringen von Tragrollen. KW - Sensor KW - Tragrolle KW - Labyrinthdichtung KW - Gurtförderer KW - EnergyHarvesting KW - Fett KW - Schmiermittel Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.11057426 SP - 1 EP - 5 ER -