TY - GEN A1 - Figaschewsky, Felix A1 - Hanschke, Benjamin A1 - Kühhorn, Arnold T1 - Efficient Generation of Engine Representative Tip Timing Data Based on a Reduced Order Model for Bladed Rotors T2 - ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, Volume 7C: Structures and Dynamics, Oslo, Norway, June 11–15, 2018 N2 - In modern compressors the assessment of blade vibration levels as well as health monitoring of the components are fundamental tasks. Traditionally, this assessment is done by the application of strain gauges to some blades of the assembly. In contrast to strain gauges, blade tip timing (BTT) offers a contactless monitoring of all blades of a rotor and there is no need of a telemetry system. A major issue in the interpretation of BTT data is the heavily undersampled nature of the signal. Usually, newly developed BTT algorithms are tested with sample data created by simplified structural models neglecting many of the uncertainties and disturbing influences of real applications. This work focuses on the creation of simulated BTT datasets as close as possible to real case measurements. For this purpose a subset of nominal system modes (SNM) representation of a compressor rotor is utilized. This model is able to include a large number of features present in real measurements, such as mistuning, static blade deflections due to centrifugal loads, aerodynamic damping and multiple mode resonances. Additionally, manufacturing deviations of the blade geometry, probe positioning errors in the BTT system and noise in the time of arrivals (TOAs) are captured by the BTT simulation environment. The main advantage of the created data is the possibility to steadily increase the signal complexity. Starting with a “perfect” signal the simulation environment is able to add different uncertainties one after the other. This allows the assessment of the influence of different features occurring in real measurements on the performance and accuracy of the analysis algorithms. Finally, a comparison of simulated BTT data and real data acquired from a rig test is shown to validate the presented approach of BTT data generation. Copyright © 2018 by Rolls-Royce Deutschland Ltd & Co KG KW - Engines KW - Rotors Y1 - 2018 SN - 978-0-7918-5115-9 U6 - https://doi.org/10.1115/GT2018-76342 PB - ASME CY - New York, NY ER - TY - CHAP A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Figaschewsky, Felix A1 - Bornholm, Alfons A1 - Repetckii, Oleg V. T1 - Forced Response Reduction of a Blisk by Means of Intentional Mistuning T2 - ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, Volume 7C: Structures and Dynamics, Oslo, Norway, June 11–15, 2018 N2 - The effect of intentional mistuning has been analyzed for an axial turbocharger blisk with the objective of limiting the forced response due to low engine order excitation (LEO). The idea behind the approach was to increase the aerodynamic damping for the most critical fundamental mode in a way that a safe operation is ensured without severely losing aerodynamic performance. Apart from alternate mistuning a more effective mistuning pattern is investigated, which has been derived by means of optimization employing genetic algorithms. In order to keep the manufacturing effort as small as possible only two blade different geometries have been allowed which means that an integer optimization problem has been formulated. Two blisk prototypes have been manufactured for the purpose of demonstrating the benefit of the intentional mistuning pattern identified in this way: A first one with and a second one without employing intentional mistuning. The real mistuning of the prototypes has been experimentally identified. It is shown that the benefit regarding the forced response reduction is retained in spite of the negative impact of unavoidable additional mistuning due to the manufacturing process. Independently, further analyzes have been focused on the robustness of the solution by considering increasing random structural mistuning and aerodynamic mistuning as well. The latter one has been modeled by means of varying aerodynamic influence coefficients (AIC) as part of Monte Carlo simulations. Reduced order models have been employed for these purposes. KW - Engines KW - Manufactoring KW - Simulation KW - Turbochargers KW - Damping KW - Optimization Y1 - 2018 SN - 978-0-7918-5115-9 U6 - https://doi.org/10.1115/GT2018-76584 PB - ASME CY - New York, NY ER - TY - GEN A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Figaschewsky, Felix A1 - Hönisch, Peter A1 - Giersch, Thomas A1 - Schrape, Sven T1 - Model update and validation of a mistuned high-pressure compressor blisk T2 - The Aeronautical Journal N2 - In order to prepare an advanced 4-stage high-pressure compressor rig test campaign, details regarding both accomplishment and analysis of preliminary experiments are provided in this paper. The superior objective of the research project is to contribute to a reliable but simultaneously less conservative design of future high pressure blade integrated disks (blisk). It is planned to achieve trend-setting advances based on a close combination of both numerical and experimental analyses. The analyses are focused on the second rotor of this research compressor, which is the only one being manufactured as blisk. The comprehensive test program is addressing both surge and forced response analyses e.g. caused by low engine order excitation. Among others the interaction of aeroelastics and blade mistuning is demanding attention in this regard. That is why structural models are needed, allowing for an accurate forced response prediction close to reality. Furthermore, these models are required to support the assessment of blade tip timing (BTT) data gathered in the rig tests and strain gauge (s/g) data as well. To gain the maximum information regarding the correlation between BTT data, s/g-data and pressure gauge data, every blade of the second stage rotor (28 blades) is applied with s/g. However, it is well known that s/g on blades can contribute additional mistuning that had to be considered upon updating structural models. Due to the relevance of mistuning, efforts are made for its accurate experimental determination. Blade-by-blade impact tests according to a patented approach are used for this purpose. From the research point of view, it is most interesting to determine both the effect s/g-instrumentation and assembling the compressor stages on blade frequency mistuning. That is why experimental mistuning tests carried out immediately after manufacturing the blisk are repeated twice, namely, after s/g instrumentation and after assembling. To complete the pre-test program, the pure mechanical damping and modal damping ratios dependent on the ambient pressure are experimentally determined inside a pressure vessel. Subsequently the mistuning data gained before is used for updating subset of nominal system mode (SNM) models. Aerodynamic influence coefficients (AICs) are implemented to take aeroelastic interaction into account for forced response analyses. Within a comparison of different models, it is shown for the fundamental flap mode (1F) that the s/g instrumentation significantly affects the forced response, whereas the impact of assembling the compressor plays a minor role. KW - Blisk KW - Mistuning KW - Aerodynamic damping Y1 - 2019 U6 - https://doi.org/10.1017/aer.2018.149 SN - 2059-6464 SN - 0001-9240 VL - 123 IS - 1260 SP - 230 EP - 247 ER - TY - GEN A1 - Figaschewsky, Felix A1 - Kühhorn, Arnold A1 - Beirow, Bernd A1 - Giersch, Thomas A1 - Schrape, Sven T1 - Analysis of mistuned forced response in an axial high-pressure compressor rig with focus on Tyler–Sofrin modes T2 - The Aeronautical Journal N2 - This paper aims at contributing to a better understanding of the effect of Tyler–Sofrin Modes (TSMs) on forced vibration responses by analysing a 4.5-stage research axial compressor rig. The first part starts with a brief review of the involved physical mechanisms and necessary prerequisites for the generation of TSMs in multistage engines. This review is supported by unsteady CFD simulations of a quasi 2D section of the studied engine. It is shown that the amplitude increasing effect due to mistuning can be further amplified by the presence of TSMs. Furthermore, the sensitivity with respect to the structural coupling of the blades and the damping as well as the shape of the expected envelope is analysed. The second part deals with the Rotor 2 blisk of the research compressor rig. The resonance of a higher blade mode with the engine order of the upstream stator is studied in two different flow conditions realised by different variable stator vane (VSV) schedules which allows to separate the influence of TSMs from the impact of mistuning. A subset of nominal system modes representation of the rotor is used to describe its mistuned vibration behaviour, and unsteady CFD simulations are used to characterise the present strength of the TSMs in the particular operating conditions. Measured maximum amplitude vs blade pattern and frequency response functions are compared against the predictions of the aeromechanical models in order to assess the strength of the TSMs as well as its influence on vibration levels. Y1 - 2019 U6 - https://doi.org/10.1017/aer.2018.163 SN - 2059-6464 IS - 123 SP - 356 EP - 377 ER - TY - GEN A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Figaschewsky, Felix A1 - Bornholm, Alfons T1 - Vibration analysis of a mistuned axial turbine blisk T2 - ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, June 17–21, 2019, Phoenix, Arizona, USA N2 - An axial turbine blisk for turbocharger applications is analyzed with respect to the effect of intentional mistuning on the forced response. Originally, the intentional mistuning pattern has been designed by employing a genetic algorithm optimization in order to reduce the forced response caused by low engine order excitation (LEO) of the fundamental flap mode. The solution found has been implemented in a prototype of that blisk. For the purpose of comparison, a second reference blisk has been manufactured without intentional mistuning. The actual mistuning distributions of the blisks have been identified by employing blade-by-blade impact testing. Alternatively, a new inverse approach has been employed, which is based on a least squares formulation and benefits from less experimental effort. Based on the information gained by the aforementioned testing procedures, subset of nominal systems (SNM)-models have been updated, which allow for considering the aeroelastic coupling by means of aerodynamic influence coefficients (AIC). Despite of small but unavoidable deviations from the design intention it could be proved within numerical simulations that the intended 70 per cent reduction of the maximum forced response is nevertheless achieved. In addition, the paper is addressing the effect of the aforementioned intentional mistuning pattern on a higher mode, which is relevant for the durability as well. Hence, new SNM-models have to be updated in order to calculate the forced response due to EO-excitation caused by the nozzle guide vane. Although the original mistuning pattern has been optimized solely for reducing the forced response of the fundamental flap mode, it hardly affects the higher mode forced response in a negative manner. KW - Turbines KW - Vibration analysis KW - Blades KW - Excitation KW - Computer simulation KW - Design Y1 - 2019 UR - https://asmedigitalcollection.asme.org/GT/GT2019/volume/58691 SN - 978-0-7918-5869-1 U6 - https://doi.org/10.1115/GT2019-92047 ER - TY - GEN A1 - Figaschewsky, Felix A1 - Kühhorn, Arnold A1 - Beirow, Bernd A1 - Giersch, Thomas A1 - Schrape, Sven A1 - Nipkau, Jens T1 - An inverse approach to identify tuned aerodynamic damping, system frequencies and mistuning – Part 3: Application to engine data T2 - ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, June 17–21, 2019, Phoenix, Arizona, USA N2 - A novel approach for the identification of tuned aerodynamic damping, system frequencies, forcing and mistuning has been introduced in the first part of this paper. It is based on the forced response equations of motion for a blade dominated mode family. A least squares formulation allows to identify the system’s parameters directly from measured frequency response functions (FRFs) of all blades recorded during a sweep through a resonance. The second part has dealt with its modification and application to experimental modal analyses of blisks at rest. This 3rd part aims at presenting the application of the approach to blade tip timing (BTT) data acquired in rig tests. Therefore, blisk rotors of two different engines are studied: a single stage fan rig and a 4.5 stage high pressure compressor (HPC) rig. The rig test campaign of the fan blisk included also an intentional mistuning experiment that allows to study the performance of the identification approach for a similar rotor with two different mistuning levels. It is demonstrated that the approach can identify aerodynamic damping curves, system frequencies, mistuning pattern and forced travelling wave modes (TWMs) from state of the art BTT data monitored during rig or engine tests. All derived mistuning patterns could be verified with reference measurements at standstill. The derived aerodynamic damping curves and system frequencies show a reasonable agreement with simulations. For the HPC case a multitude of excited TWMs could be identified which also lines up with previous simulations. KW - Damping KW - Engines KW - Blades KW - Engineering simulation KW - Rotors KW - Compressors KW - Modal analysis Y1 - 2019 UR - https://asmedigitalcollection.asme.org/GT/proceedings-abstract/GT2019/58684/V07AT36A014/1067111 SN - 978-0-7918-5868-4 U6 - https://doi.org/10.1115/GT2019-91337 ER - TY - GEN A1 - Franz, Falco A1 - Kühhorn, Arnold A1 - Giersch, Thomas A1 - Schrape, Sven A1 - Figaschewsky, Felix T1 - Influence of Inlet Distortions on the Forced Vibration of a High Pressure Compressor Rig T2 - ASME 2020 Turbo Expo - Virtual Conference, September 2020 N2 - The accurate prediction of blade vibrations is a key factor for the development of reliable turbomachines. This paper focusses on forced vibrations. The excitation frequency is an integer multiple of the rotor revolution frequency, which is commonly called engine order. Aerodynamic excitation of blades is created by stator wakes or the potential fields of downstream obstacles, which usually leads to high engine orders correlating to the number of vanes. Resonance crossings appear at higher frequencies corresponding to higher modes. Besides high engine orders, low engine orders not related to the number of vanes may exist. They can be caused by a disturbance of the perfect cyclic symmetry of the flow pattern due to geometry variations or inlet distortions. Inlet distortions result from installation effects, maneuvers or crosswind. Low engine orders affect fundamental modes at high engine speeds. High static loads due to centrifugal forces combined with dynamic excitation and low damping may lead to unacceptable high stresses. This paper aims at getting a better understanding of the simulative prediction of low engine order excitation with special focus on inlet distortions. Under investigation is a 4.5 stage research compressor rig, for which an extensive amount of test data is available. A three dimensional CFD-model of the compressor is used to compute the forcings generated by different distortion patterns. The first two stages are modeled as a full-annulus, which allows to fully resolve the spatial content of the inlet distortion patterns. The rotor 2 blisk is of special interest in this investigation. The propagation of the distortion after stage 2 with rotor 2 is not of interest, therefore the downstream stages are modeled as single passages in order to save computational time. The distortion patterns are the outcome of traversals of different screens with total pressure probes. During distortion measurements, the screens located in the inlet duct were rotated relative to the fixed instrumentation. The traversals in resonance of the first bending mode of rotor 2 with a low engine order four showed a dependency of the screen angle on the vibration amplitude. Acceleration and deceleration maneuvers through this resonance were conducted with screen angles set to those of smallest and highest response. Vibration amplitudes of the blisk rotor are measured by strain gauges and a blade tip timing system. Simulation results are compared against vibration measurements. Aerodynamic damping is calculated with the influence coefficient method. The effects of mistuning are included in the calculation of vibration amplitudes via a subset of nominal system modes model to give a meaningful comparison against real engine hardware. The mistuning distribution of the blisk was identified at rest for the fundamental bending mode. The presence of a 2nd excitation mechanism of unknown source explains the observed test data. This unknown source is not included in the CFD model. A direct comparison of simulation and measurement is still possible by leveraging the observed superposition effects of both excitation sources. The consequent approach is to identify and substract the forcing due to the unknown source, leaving only the delta forcing due to inlet distortions. Y1 - 2020 UR - https://asme-turboexpo.secure-platform.com/a/solicitations/105/sessiongallery/4675/application/46115 ER - TY - GEN A1 - ElMasry, Seif A1 - Kühhorn, Arnold A1 - Figaschewsky, Felix T1 - Investigation of Working Line Variation Onto Forced Response Vibrations of a Compressor Blisk T2 - Turbo Expo 2021, Virtual Conference and Exhibition: September 21, 2020 N2 - Avoidance of high vibration amplitudes of rotor blades on the conventional working line of the compressor is a design requirement. However, rotors of aircraft engine compressors could temporarily operate near choke and stall conditions, due to transient manoeuvers or deterioration. As a result, the vibration levels might change, which could lead to a premature high cycle fatigue of the blades. This paper aims at studying the effect of different throttle positions at five constant aerodynamic speed lines ranging from 60% to 100% of the maximum speed onto the resulting vibration amplitudes and aerodynamic damping values on an integrally bladed disk (blisk) of a transonic research compressor. Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) simulations are performed via an automated workflow, which reads aerodynamic data of the operating points of interest and runs all necessary aeromechanic computations along with their corresponding post-processing routines to calculate the resulting system response and amplitude frequency values. Using this workflow, Eigenfrequencies and mode-shapes of the rotor blades are obtained through multiple FEA simulations that are automatically executed at all relevant shaft speeds. The time-averaged flow pressure field on the blades is extracted from steady CFD simulations of the whole compressor and mapped onto the structural mesh of the rotor. Through a Spokes diagram, operating points in close proximity to resonance spots are identified, as well as their corresponding excited vibration modes. To obtain the time-variable flow pressure fields on the blades, unsteady CFD simulations are performed using a single passage model of the rotor with its upstream and downstream stators, as space-time periodicity of the flow data across the annulus is assumed. Additionally, a CFD rotor model with only a quarter section of the full annulus is built, where a unidirectional coupling approach between the structure and the fluid is applied to calculate the aerodynamic damping values. The calculated vibration amplitudes at engine orders of interest are then compared to strain gauge readings of a corresponding rig test. After validation of the simulation data, the sensitivity of the forced response due to working line variations is studied. Looking at the maximum aerodynamic speed line, it is clear that operating points near compressor stall are accompanied by high vibration response relative to the aerodynamic design point. A possible reason for this amplification is the change of flow incidence and the increase of pressure loss at the upstream blade-row. However, this effect becomes less articulated in the lower speed lines, where amplitudes of the forced vibrations change only slightly between different throttling positions. In this paper, the three-dimensional flow inside the passages is also carefully studied, which allows to better understand the relationship between flow characteristics and the resulting vibration response of compressor blades. Y1 - 2020 UR - https://asme-turboexpo.secure-platform.com/a/solicitations/105/sessiongallery/5322/application/45655 ER -