TY - GEN A1 - Mante, Till A1 - Prehn, Sascha A1 - Theile, Martin A1 - Seidel, Lars A1 - Mestre, Laura A1 - Buchholz, Bert A1 - Mauß, Fabian ED - Heintzel, Alexander T1 - Investigation of An Ammonia Diesel Dual-Fuel Combustion Process on a Heavy-Duty Single Cylinder Research Engine for the Development of Suitable Simulation Tools for Maritime Applications T2 - Heavy-Duty-, On- und Off-Highway-Motoren 2022 : Stand der Energiewende im Heavy-Duty-Bereich N2 - This paper discusses the adaption of a single cylinder research engine for a retrofit application with an ammonia diesel dual-fuel combustion process and the build of an ammonia fuel system. The gaseous ammonia will be injected in the air intake pipe and the premixed ammonia air mixture will enter the combustion chamber. The diesel injection is carried out via a high-pressure common rail system. All relevant parameters can be freely adjusted via a freely programmable control unit. With the help of experimental data from a single cylinder research engine at the chair of piston machines and internal combustion engines of the University of Rostock (LKV), a dual-fuel combustion model based on detailed chemistry will be developed and optimized. This model will be integrated in a full research engine model, which ensures the best possible representation of the real engine. The combustion model is being developed by LOGE Deutschland GmbH. The full research engine model is developed by FVTR GmbH. The analysis of the combustion process starts with pure diesel operating points and is successively substituted by ammonia in the course of the measurement campaigns. Both the combustion characteristics are relevant, as they significantly influence the resulting performance and engine operation, as well as the exhaust emissions, as the carbon emissions can be reduced, but the nitrogen oxides and ammonia slip increase significantly in relevance due to the ammonia. The results obtained will be used to derive initial recommendations for action and to estimate the potential for application in the inland waterway shipping. In addition, the development of the systematic simulation tools covers a broad spectrum of research questions and aims to increase the efficiency of the necessary R&D. Y1 - 2022 SN - 978-3-658-41477-1 SN - 978-3-658-41476-4 U6 - https://doi.org/10.1007/978-3-658-41477-1_3 SP - 24 EP - 39 PB - Springer Vieweg CY - Wiesbaden ER - TY - GEN A1 - Turquand d'Auzay, Charles A1 - Shapiro, Evgeniy A1 - Prouvier, Matthieu A1 - Winkler, Axel A1 - Seidel, Lars A1 - Borg, Anders A1 - Mauß, Fabian T1 - Evaluation of Fast Detailed Kinetics Calibration Methodology for 3D CFD Simulations of Spray Combustion T2 - SAE Technical Paper N2 - Meeting strict current and future emissions legislation necessitates development of computational tools capable of predicting the behaviour of combustion and emissions with an accuracy sufficient to make correct design decisions while keeping computational cost of the simulations amenable for large-scale design space exploration. While detailed kinetics modelling is increasingly seen as a necessity for accurate simulations, the computational cost can be often prohibitive, prompting interest in simplified approaches allowing fast simulation of reduced mechanisms at coarse grid resolutions appropriate for internal combustion engine simulations in design context. In this study we present a simplified Well-stirred Reactor (WSR) implementation coupled with 3D CFD Ricardo VECTIS solver. A detailed evaluation of benchmark ECN spray problem is presented demonstrating that a single point calibration of such a model using a bulk reaction multiplier approach can provide correct representation of the solution across a wide range of temperatures on grid sizes typically employed for RANS internal combustion engine simulations with tabulated kinetics or zonal combustion models. Y1 - 2022 U6 - https://doi.org/10.4271/2022-01-1042 SN - 0148-7191 SN - 0096-5170 IS - 2022-01-1042 ER - TY - GEN A1 - Richter, Jana A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Reaction mechanism development and investigation on the convergence influence in a 1D catalyst model for a γ-alumina stabilized three-way catalyst T2 - The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines N2 - Accurate and computational cost-effective modeling tools for the optimization of processes and devices of all kinds are needed in nearly all scientific fields. While experimental optimization entails high expenses in terms of cost and time virtual optimization may be a promising alternative. In this work, the suitability and accuracy of a 1D heterogeneous catalytic model is investigated. First, the influence of cell discretization and residence time on the convergence in a 1D catalyst model are investigated. Second, the catalyst model is investigated and validated with use of a stoichiometric steady state three-way catalyst experiment. With the help of these investigations the reaction mechanism is further developed and new reaction rates for two reactions are presented. The modeling results are compared to a 2D simulation approach in terms of computational time and catalyst conversion behavior. The presented model is capable to capture the experimental results with a drastically reduced computational time in comparison to the 2D simulation presented in literature. Y1 - 2022 UR - https://www.jstage.jst.go.jp/article/jmsesdm/2022.10/0/2022.10_A10-3/_article/-char/en U6 - https://doi.org/10.1299/jmsesdm.2022.10.A10-3 SN - 2424-2918 ER - TY - GEN A1 - Rakhi, Rakhi A1 - Shrestha, Krishna Prasad A1 - Günther, Vivien A1 - Mauß, Fabian T1 - Kinetically consistent detailed surface reaction mechanism for steam reforming of methane over nickel catalyst T2 - Reaction Kinetics, Mechanisms and Catalysis KW - Nickel-based catalyst KW - Kinetic consistency KW - Thermodynamic analysis KW - Steam reforming KW - Detailed surface reaction mechanism Y1 - 2022 UR - https://link.springer.com/article/10.1007/s11144-022-02314-7 U6 - https://doi.org/10.1007/s11144-022-02314-7 SN - 1878-5204 SN - 1878-5190 VL - 135 IS - 6 SP - 3059 EP - 3083 ER -