TY - GEN A1 - Ewert, Moritz A1 - Schmidt, Thomas A1 - Flege, Jan Ingo A1 - Heidmann, Inga A1 - Grzela, Tomasz A1 - Klesse, Wolfgang Matthias A1 - Förster, M. A1 - Aballe, Lucia A1 - Schröder, Thomas T1 - Morphology and Chemical Composition of Co Germanide islands on Ge(001): in-situ nanoscale insights into contact formation for Ge-based device technology T2 - Nanotechnology Y1 - 2016 SN - 1361-6528 SN - 0957-4484 VL - 27 IS - 32 SP - 325705 ER - TY - GEN A1 - Buß, Lars A1 - Falta, Jens A1 - Ewert, Moritz A1 - Shao, Bin A1 - Wehling, Tim Oliver A1 - Flege, Jan Ingo T1 - The role of two-dimensional pressure in sulfur intercalation underneath graphene on ruthenium T2 - Verhandlungen der DPG - SurfaceScience21 N2 - Micrometer-sized single-layer graphene can epitaxially be grown on transition-metal substrates with excellent crystalline quality. However, due to strong binding these substrates have a detrimental influence on the intrinsic properties of the graphene. By lifting the interlayer coupling, e. g., via intercalating foreign atoms, its unique electronic properties can be restored. We have investigated the intercalation of sulfur underneath graphene on Ru(0001) with low-energy electron microscopy (LEEM) and micro-diffraction (µLEED). We find that sulfur deposited at elevated temperatures enters through the edge of the island, leading to wrinkle formation in the decoupled graphene. Interestingly, the presence of the graphene limits the possible S/Ru(0001) reconstructions that may form underneath, preventing less dense reconstructions like the p(2× 2) and (√3× √3) reconstructions. Based on density functional theory calculations, these findings are explained by a 2D pressure exerted by the overlying graphene, which results from the strong graphene-substrate interaction, only rendering the denser reconstructions of the S/Ru phase diagram energetically favorable. KW - Low energy elecron microscopy (LEEM) KW - Low energy electron diffraction LEED KW - graphene KW - ruthenium KW - sulfur intercalation Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/105/contribution/3 VL - 2021 PB - Deutsche Physikalische Gesellschaft e.V. CY - Bad Honnef ER - TY - GEN A1 - Ewert, Moritz A1 - Buß, Lars A1 - Genuzio, Francesca A1 - Menteş, Tevfik Onur A1 - Locatelli, Andrea A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - Transitions from single-layer MoS2 to bilayer growth: A LEEM study T2 - Verhandlungen der DPG - SurfaceScience21 N2 - Molybdenum disulfide (MoS2) is well-known to change from an indirect to a direct semiconductor as a single layer. We present insights from in-situ low-energy electron microscopy (LEEM) on the extended growth of MoS2 on the Au(111) surface at elevated temperatures of 720°C. Our continuous growth method leads to the formation of micron-sized single-layer MoS2 islands. The single-domain character of these islands is confirmed by employing dark-field imaging and micro-diffraction (LEED). This also reveals the distribution of 90:10 of the two expected MoS2 mirror domains on Au(111). Selected-area angle-resolved photoelectron spectroscopy (ARPES) measurements of these mirror domains underline the threefold symmetry of the two mirror domains and indicate the presence of MoS2 bilayer. Using X-ray photoemission electron microscopy (XPEEM) and intensity-voltage LEEM (I(V))-LEEM we identify the bilayer nucleation areas at nearly full surface coverage and propose a model pathway for their formation. KW - Molybdenum disulfide (MoS2) KW - Low energy electron microscopy (LEEM) KW - Lowenergy electron diffraction KW - Angle-resolved photoelecton spectroscopy Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/105/contribution/12 VL - 2021 CY - Bad Honnef ER - TY - GEN A1 - Angrick, Christoph A1 - Henriksen, Annika A1 - Mutzke, Nicole A1 - Reimann, Andre A1 - Ewert, Moritz A1 - Buß, Lars A1 - Falta, Jens A1 - Flege, Jan Ingo A1 - Donath, Markus T1 - Spin-polarized VLEED from single-layer MoS2/Au(111): Investigation of spin-orbit-induced effects T2 - Verhandlungen der DPG - SurfaceScience21 N2 - The influence of spin-orbit interaction on low-energy electron reflection from single-layer MoS2 on Au(111) was studied by VLEED (very-low-energy electron diffraction) [1,2]. The spin-dependent electron reflection was investigated for a wide range of electron incidence angles and kinetic energies. Since the adlayer coverage is about 30%, we studied the Au(111) substrate and a MoS2 bulk sample for comparison. This approach enabled us to distinguish between adlayer and substrate signals. For MoS2/Au(111), we detected a spin asymmetry of the reflected intensities, which shows a characteristic feature with alternating sign in the energy region of a VLEED fine structure [1]. The Au(111) substrate, in contrast, shows qualitatively different spin-asymmetry features, partially with reversed sign compared with MoS2/Au(111). The results of bulk MoS2 confirm that the characteristic feature in the single-layer data originates from MoS2. The influence of the adlayer-substrate interaction on the results will be discussed. [1] Burgbacher et al., Phys. Rev. B 87, 195411 (2013) [2] Angrick et al., J. Phys.: Condens. Matter 33, 115001 (2020) KW - Molybdenum disulfide (MoS2) KW - very-low-energy electron diffraction (VLEED) KW - spin-orbit interaction Y1 - 2021 UR - https://www.dpg-verhandlungen.de/year/2021/conference/surfacescience/part/o/session/78/contribution/3 VL - 2021 PB - Deutsche Physikalische Gesellschaft e.V. CY - Bad Honnef ER - TY - GEN A1 - Ewert, Moritz A1 - Buß, Lars A1 - Genuzio, Francesca A1 - Menteş, Tevfik Onur A1 - Locatelli, Andrea A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - On the transition from MoS2 single-layer to bilayer growth on the Au(111) surface T2 - Verhandlungen der DPG N2 - MoS2 is well known for changing from an indirect to a direct band-gap semiconductor as a single layer. Here, for the model system MoS2/Au(111), we present in-situ studies of the continued growth of micron-size single-layer MoS2 islands including the first formation of bilayer patches. We have used angle-resolved photoemission spectroscopy from micrometer sized regions to investigate the local band structure of the islands’ rims and centers, showing a prevalence for bilayer and single-layer formation at the rims and centers, respectively. The bilayer patches can clearly be identified locally on the few nanometer scale employing intensity-voltage low-energy electron microscopy as a fingerprinting method. Astonishingly, micro-spot low-energy electron diffraction hints toward the nucleation of the second layer of the MoS2 between the single layer MoS2 and the Au(111) substrate when the step bunches formed by the single-terrace growth mechanism become sufficiently high. KW - angle-resolved photoemission spectroscopy KW - low-energy electron microscopy KW - intensity-voltage KW - micro-spot low-energy electron diffraction KW - step bunches KW - single-terrace growth Y1 - 2022 UR - https://www.dpg-verhandlungen.de/year/2022/conference/regensburg/part/o/session/65/contribution/3 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Ewert, Moritz A1 - Buß, Lars A1 - Lauritsen, Jeppe V. A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - Growth Mechanism of Single-Domain Monolayer MoS2 Nanosheets on Au(111) Revealed by In Situ Microscopy: Implications for Optoelectronics Applications T2 - ACS Applied Nano Materials N2 - The nucleation and growth of single-layer molybdenum disulfide single-domain nanosheets is investigated by in situ low-energy electron microscopy. We study the growth of micrometer-sized flakes and the correlated flattening process of the gold surface for three different elevated temperatures. Furthermore, the influence of surface step edges on the molybdenum disulfide growth process is revealed. We show that both nanosheet and underlying terrace grow simultaneously by pushing the surface step in the expansion process. Our findings point to an optimized growth procedure allowing for step-free, single-domain, single-layer islands of several micrometers in size, which is likely transferable to other transition-metal dichalcogenides (TMDs), offering a very fine degree of control over the TMD nanosheet structure and thickness. KW - in situ methods KW - low-energy electron microscopy and diffraction KW - molybdenum disulfide KW - 2D material KW - epitaxial growth mechanism KW - Au(111) Y1 - 2022 U6 - https://doi.org/10.1021/acsanm.2c03584 SN - 2574-0970 VL - 5 IS - 12 SP - 17702 EP - 17710 ER - TY - GEN A1 - Buß, Lars A1 - Braud, Nicolas A1 - Ewert, Moritz A1 - Jugovac, Matteo A1 - Mentes, Tevfik Onur A1 - Locatelli, Andrea A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - In-situ growth characterization of 2D heterostructures: MoSe2 on intercalated graphene/Ru(0001) T2 - Verhandlungen der DPG N2 - Despite the great fundamental interest in 2D heterostructures, most of the investigated 2D heterostructures were realized by mechanical exfoliation or chemical vapor deposition in the millibar range, preventing true in-situ characterization of the growth process. Here, we have investigated the growth of MoSe2 on single-layer graphene on Ru(0001) via real-time in-situ low-energy electron microscopy and micro-diffraction. After preparation of the graphene by standard procedures from an ethylene precursor, MoSe2 has been prepared via co-deposition of Mo and Se. Prior Se intercalation of the graphene appears to enhance the subsequent growth of MoSe2 on the graphene. At elevated temperatures, rotational ordering of the MoSe2 is facilitated by the strongly enhanced mobility of single-domain MoSe2 islands that align with the high symmetry orientations of the underlying graphene, indicating a non-negligible interaction between the two van-der-Waals materials. Micro-spot angle-resolved photoemission proves the monolayer nature of the as-grown MoSe2 as well as the free-standing character of the Se-intercalated graphene underneath. KW - MoSe2 KW - low-energy electron microscopy (LEEM9 KW - micro-diffraction Y1 - 2023 UR - https://www.dpg-verhandlungen.de/year/2023/conference/skm/part/o/session/74/contribution/1 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Schewe, Lukas A1 - Sulaiman, Cathy A1 - Buß, Lars A1 - Ewert, Moritz A1 - Flege, Jan Ingo T1 - In-situ photoemission electron microscopy investigation of mono- and bilayer graphene growth on Ru(10-10) T2 - Verhandlungen der DPG N2 - Epitaxial graphene growth has often been studied on close-packed transition metal substrates, e. g., the Ru(0001) surface, which is a well-studied model system for strong graphene-support interaction. Here, we focus on a Ru surface with different symmetry, i. e., the Ru(10-10) surface, to investigate the influence of the presumably modified graphene-substrate interaction on the growth of epitaxial monolayer and bilayer graphene (MLG, BLG) islands. The structural and chemical differences of the graphene on the two different surfaces are investigated by photoemission electron microscopy (PEEM), delivering information on both morphology and electronic structure. In-situ PEEM observation of graphene growth on the Ru(10-10) substrate by ethylene decomposition reveals the growth characteristics of MLG and BLG, the latter showing second layer nucleation via surface segregation of carbon. Furthermore, depending on growth temperature and relative orientation of the growing islands and surface steps, different growth characteristics are observed, in contrast to previous studies of the graphene/Ru(0001) system whereas similar electronic properties seem to prevail. Yet, when the MLG is decoupled from the Ru(10-10) substrate via intercalation of oxygen a distinct shift in work function is identified, slightly different from the resulting shift on Ru(0001). KW - photoemission electron microscopy (PEEM) KW - graphene KW - ruthenium KW - growth characteristics Y1 - 2023 UR - https://www.dpg-verhandlungen.de/year/2023/conference/skm/part/o/session/93/contribution/7 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Angrick, Christoph A1 - Thiede, Christian A1 - Reimann, Andre A1 - Henriksen, Annika A1 - Mutzke, Nicole A1 - Ewert, Moritz A1 - Buß, Lars A1 - Falta, Jens A1 - Flege, Jan Ingo A1 - Donath, Markus T1 - Spin-polarized very-low-energy electron diffraction from spin-orbit- and/or exchange-influenced targets T2 - Verhandlungen der DPG N2 - Exchange (XC) or spin-orbit (SOC) interaction cause electron scattering from surfaces to be spin dependent. The resulting spin filtering of the scattered electron beam can be used in spin-polarization analyzers. These analyzers are implemented in, for instance, photoemission setups to obtain spin resolution. Therefore, for promising targets, electron reflectivity and resulting spin asymmetry of very-low-energy electrons are measured for a wide range of incident electron energies and angles. By this, the investigated target is put to a test regarding the usability as a scattering target in a spin-polarization analyzer. Here, several results of SOC- as well as XC-influenced targets are presented. The results of the SOC-influenced targets Au(111), single-layer MoS2/Au(111) and W(110) [1] are compared with the results of the XC-influenced target Fe(001)-p(1x1)O [2]. Additionally, the influence of SOC interaction in the case of the XC-influenced target is investigated. The spin asymmetry caused by SOC is found to be one order of magnitude smaller than the spin asymmetry caused by XC. [1] Angrick et al., J. Phys.: Condens. Matter 33, 115001 (2020). [2] Thiede et al., Phys. Rev. Applied 1, 054003 (2014). KW - spin-polarization analysis KW - very-low-energy electron diffraction Y1 - 2023 UR - https://www.dpg-verhandlungen.de/year/2023/conference/skm/part/o/session/67/contribution/8 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Buß, Lars A1 - Braud, Nicolas A1 - Ewert, Moritz A1 - Jugovac, Matteo A1 - Menteş, Tevfik Onur A1 - Locatelli, Andrea A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - Unraveling van der Waals epitaxy: A real-time in-situ study of MoSe2 growth on graphene/Ru(0001) T2 - Ultramicroscopy N2 - In the present work we investigate the growth of monolayer MoSe2 on selenium-intercalated graphene on Ru(0001), a model layered heterostructure combining a transition metal dichalcogenide with graphene, using low energy electron microscopy and micro-diffraction. Real-time observation of MoSe2 on graphene growth reveals the island nucleation dynamics at the nanoscale. Upon annealing, larger islands are formed by sliding and attachment of multiple nanometer-sized MoSe2 flakes. Local micro-spot angle-resolved photoemission spectroscopy reveals the electronic structure of the heterostructure, indicating that no charge transfer occurs within adjacent layers. The observed behavior is attributed to intercalation of Se at the graphene/Ru(0001) interface. The unperturbed nature of the proposed heterostructure therefore renders it as a model system for investigations of graphene supported TMD nanostructures. KW - Graphene KW - transition metal dichalcogenides (TMDs) KW - angle-resolved photoemission spectroscopy (ARPES) KW - Heterostructures KW - low energy electron microscopy (LEEM) KW - low energy electron diffraction (LEED) Y1 - 2023 U6 - https://doi.org/10.1016/j.ultramic.2023.113749 SN - 0304-3991 SN - 1879-2723 VL - 250 ER - TY - GEN A1 - Sulaiman, Cathy A1 - Schewe, Lukas A1 - Buß, Lars A1 - Ewert, Moritz A1 - Flege, Jan Ingo T1 - In-situ monolayer graphene growth on Ru(10-10): an electron microscopy study T2 - Verhandlungen der DPG N2 - During the last decade, the controlled growth of monolayer (MLG) and bilayer graphene has extensively been studied on the hexagonal Ru(0001) surface, which is a system that is known to form strong chemical bonds at the metal-graphene interface. Yet, little attention was paid to the influence of the substrate orientation that was demonstrated to have a significant impact for graphene growth on the Ir(001) and Ir(111) surfaces, the latter exhibiting a weak coupling between the graphene and the support. Therefore, in this study we have grown graphene on the rectangular Ru(10-10) surface by segregation and ethylene-supported chemical vapor deposition. A photoemission and low-energy electron microscope (PEEM & LEEM) has been utilized to directly characterize the MLG growth process with respect to variations in substrate temperature and step orientation. The expansion of the MLG islands is compared to the well-established carpet-growth mode on the Ru(0001) surface. These results have been complemented by probing of the occupied and unoccupied electronic structure of the islands using PEEM and intensity-voltage LEEM. Furthermore, the existence of two preferential surface reconstructions is identified via micro-illumination low-energy electron diffraction (LEED), whose spatial distribution is revealed by employing dark-field LEEM imaging. KW - photoemission electron microscopy (PEEM) KW - graphene KW - ruthenium KW - low-energy electron microscopy (LEEM) KW - low-energy electron diffraction (LEED) Y1 - 2023 UR - https://www.dpg-verhandlungen.de/year/2023/conference/skm/part/o/session/64/contribution/8 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Pożarowska, Emilia A1 - Pleines, Linus A1 - Ewert, Moritz A1 - Prieto, Mauricio J. A1 - Tănase, Liviu Christian A1 - Souza Caldas, Lucas de A1 - Tiwari, Aarti A1 - Schmidt, Thomas A1 - Falta, Jens A1 - Krasovskii, Eugene A1 - Morales, Carlos A1 - Flege, Jan Ingo T1 - Preparation and stability of the hexagonal phase of samarium oxide on Ru(0001) T2 - Ultramicroscopy N2 - We have used low-energy electron microscopy (LEEM), micro-illumination low-energy electron diffraction (µLEED) supported by ab initio calculations, and X-ray absorption spectroscopy (XAS) to investigate in-situ and in real-time the structural properties of Sm2O3 deposits grown on Ru(0001), a rare-earth metal oxide model catalyst. Our results show that samarium oxide grows in a hexagonal A-Sm2O3 phase on Ru(0001), exhibiting a (0001) oriented-top facet and (113) side facets. Upon annealing, a structural transition from the hexagonal to cubic phase occurs, in which the Sm cations exhibit the +3 oxidation state. The unexpected initial growth in the A-Sm2O3 hexagonal phase and its gradual transition to a mixture with cubic C-Sm2O3 showcases the complexity of the system and the critical role of the substrate in the stabilization of the hexagonal phase, which was previously reported only at high pressures and temperatures for bulk samaria. Besides, these results highlight the potential interactions that Sm could have with other catalytic compounds with respect to the here gathered insights on the preparation conditions and the specific compounds with which it interacts. KW - Samarium oxide (Sm2O3) KW - low-energy electron microscopy (LEEM) KW - X-ray photoemission electron microscopy (XPEEM) KW - Facets KW - Epitaxy KW - Hexagonal phase Y1 - 2023 U6 - https://doi.org/10.1016/j.ultramic.2023.113755 SN - 0304-3991 SN - 1879-2723 VL - 250 ER - TY - GEN A1 - Ewert, Moritz A1 - Buß, Lars A1 - Braud, Nicolas A1 - Kundu, Asish K. A1 - Sheverdyaeva, Polina M. A1 - Moras, Paolo A1 - Genuzio, Francesca A1 - Menteş, Tevfik Onur A1 - Locatelli, Andrea A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - The Transition From MoS2 Single-Layer to Bilayer Growth on the Au(111) Surface T2 - Frontiers in Physics N2 - The transition from single-layer to bilayer growth of molybdenum disulfide on the Au(111) surface is investigated by in situ low-energy electron and photoemission microscopy. By mapping the film morphology with nanometer resolution, we show that a MoS2 bilayer forms at the boundaries of single-layer single-domain MoS2 islands and next to merging islands whereas bilayer nucleation at the island centers is found to be suppressed, which may be related to the usage of dimethyl disulfide as sulfur precursor in the growth process. This approach, which may open up the possibility of growing continuous films over large areas while delaying bilayer formation, is likely transferable to other transition metal dichalcogenide model systems. KW - molybdenum disulfide (MoS2) KW - bilayer KW - in situ low-energy electron microscopy (LEEM) KW - in situ photoemission microscopy (PEEM) KW - micro-ARPES (angle-resolved photoelectron spectroscopy) KW - Au step bunches Y1 - 2021 U6 - https://doi.org/10.3389/fphy.2021.654845 SN - 2296-424X VL - 9 ER - TY - GEN A1 - Schmidt, Thomas A1 - Buß, Lars A1 - Ewert, Moritz A1 - Schönhoff, Gunnar A1 - Wehling, Tim Oliver A1 - Falta, Jens T1 - Adsorption of sulfur on Si(111) T2 - Surface Science N2 - The adsorption of S on Si(111)- 7 × 7 has been investigated for different preparation schemes and parameters. S was supplied from an electrochemical Ag2S cell. For room temperature adsorption and subsequent annealing, no ordered S induced reconstruction can be observed with spot profile analysis low-energy electron diffraction (SPALEED). S deposition at temperatures above about 400°C, however, leads to a well-ordered reconstruction. Judging from the LEED pattern, the same reconstruction was already observed by Metzner et al. [Surf. Sci. 377–379(1997) 71–74] who identified it as 4 × 4 reconstruction. The upper temperature limit for the pre-paration of this superstructure depends on S flux, which is needed to compensate for desorption. Prolonged S exposure leads to surface roughening, as observed with SPALEED and scanning tunneling microscopy (STM), pointing to surface etching by S. From our SPALEED data, we can conclude that the observed reconstruction is not a 4 × 4 reconstruction, but a 20/12 superstructure with a rectangular unit cell that exists in three rotational domains, as confirmed by STM. Different structural trial models have been assessed with density functional theory. Among these model structures, a configuration with dimers adsorbed on bridging sites, with a S coverage of 1 monolayer, is most likely, since it is energetically favorable and is in agreement with all experimental results. KW - Passivation KW - Low-energy electron diffraction KW - Scanning tunneling microscopy KW - Density functional theory KW - Auger electron spectroscopy Y1 - 2020 U6 - https://doi.org/10.1016/j.susc.2019.121561 SN - 0039-6028 SN - 1879-2758 VL - 694 ER - TY - GEN A1 - Bignardi, Luca A1 - Lizzit, Daniel A1 - Bana, Harsh A1 - Travaglia, Elisabetta A1 - Lacovig, Paolo A1 - Sanders, Charlotte E. A1 - Dendzik, Maciej A1 - Michiardi, Matteo A1 - Bianchi, Marco A1 - Ewert, Moritz A1 - Buß, Lars A1 - Falta, Jens A1 - Flege, Jan Ingo A1 - Baraldi, Alessandro A1 - Larciprete, Rosanna A1 - Hofmann, Philip A1 - Lizzit, Silvano T1 - Growth and structure of singly oriented single-layer tungsten disulfide on Au(111) T2 - Physical Review Materials N2 - A singly oriented, single layer of tungsten disulfide (WS2) was epitaxially grown on Au(111) and characterized at the nanoscale by combining photoelectron spectroscopy, photoelectron diffraction, and low-energy electron microscopy. Fast x-ray photoelectron spectroscopy revealed that the growth of a single crystalline orientation is triggered by choosing a low W evaporation rate and performing the process with a high temperature of the substrate. Information about the single orientation of the layer was obtained by acquiring x-ray photoelectron diffraction patterns, revealing a 1H polytype for the WS2 layer and, moreover, determining the structural parameters and registry with the substrate. The distribution, size, and orientation of the WS2 layer were further ascertained by low-energy electron microscopy. KW - tungsten disulfide (WS2) KW - Au (111) KW - photoelectron spectroscopy KW - photoelectron diffraction KW - low-energy electron microscopy Y1 - 2019 U6 - https://doi.org/10.1103/PhysRevMaterials.3.014003 SN - 2475-9953 VL - 3 IS - 1 ER - TY - GEN A1 - Ewert, Moritz A1 - Buß, Lars A1 - Moras, Paolo A1 - Falta, Jens A1 - Flege, Jan Ingo T1 - Unraveling the growth mechanism of single-domain molybdenum disulfide on Au(111) T2 - Verhandlungen der DPG N2 - As a transition metal dichalcogenide single-layer molybdenum disulfide (MoS2) is a heavily investigated system. Due to its direct band gap, the electronic properties of single-layer MoS2 have been subject to several surface science methods. A well-known model system is MoS2 on Au(111). We present in situ low-energy electron microscopy (LEEM) and micro-diffraction (LEED) observations of MoS2 growth on Au(111) at elevated temperature using two distinctly different deposition rates. Our investigations reveal similar but different expansion mechanisms of the MoS2 islands changing a balanced distribution of the two mirror domains towards a single domain distribution. Structural characterization by I(V)-LEEM and investigations of the electronic bandstructure using angle-resolved photoelectron spectroscopy both confirm single-layer nature of the MoS2 islands. We could identify step pushing of the growing MoS2 being responsible for this phenomena. KW - low-energy electron microscopy (LEEM) KW - micro-diffraction (LEED) KW - I(V)-LEEM KW - investigations of the electronic bandstructure using angle-resolved photoelectron spectroscopy Y1 - 2019 UR - https://www.dpg-verhandlungen.de/year/2019/conference/regensburg/part/o/session/35/contribution/6 SN - 0420-0195 SP - 329 EP - 329 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -