TY - GEN A1 - Mańkowska, Ewa A1 - Mazur, Michał A1 - Domaradzki, Jarosław A1 - Mazur, Piotr A1 - Kot, Małgorzata A1 - Flege, Jan Ingo T1 - Hydrogen Gas Sensing Properties of Mixed Copper–Titanium Oxide Thin Films T2 - Sensors N2 - Hydrogen is an efficient source of clean and environmentally friendly energy. However, because it is explosive at concentrations higher than 4%, safety issues are a great concern. As its applications are extended, the need for the production of reliable monitoring systems is urgent. In this work, mixed copper–titanium oxide ((CuTi)Ox) thin films with various copper concentrations (0–100 at.%), deposited by magnetron sputtering and annealed at 473 K, were investigated as a prospective hydrogen gas sensing material. Scanning electron microscopy was applied to determine the morphology of the thin films. Their structure and chemical composition were investigated by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The prepared films were nanocrystalline mixtures of metallic copper, cuprous oxide, and titanium anatase in the bulk, whereas at the surface only cupric oxide was found. In comparison to the literature, the (CuTi)Ox thin films already showed a sensor response to hydrogen at a relatively low operating temperature of 473 K without using any extra catalyst. The best sensor response and sensitivity to hydrogen gas were found in the mixed copper–titanium oxides containing similar atomic concentrations of both metals, i.e., 41/59 and 56/44 of Cu/Ti. Most probably, this effect is related to their similar morphology and to the simultaneous presence of Cu and Cu2O crystals in these mixed oxide films. In particular, the studies of surface oxidation state revealed that it was the same for all annealed films and consisted only of CuO. However, in view of their crystalline structure, they consisted of Cu and Cu2O nanocrystals in the thin film volume. KW - mixed copper–titanium oxides KW - Cu2O KW - TiO2 KW - (CuTi)Ox KW - hydrogen gas sensing KW - thin films KW - magnetron sputtering Y1 - 2023 U6 - https://doi.org/10.3390/s23083822 SN - 1424-8220 VL - 23 IS - 8 ER - TY - GEN A1 - Kosto, Yuliia A1 - Kapuscik, Paulina A1 - Tschammer, Rudi A1 - Guttmann, Dominic A1 - Mankowska, Ewa A1 - Matvija, Peter A1 - Morales, Carlos A1 - Mazur, Michał A1 - Henkel, Karsten A1 - Matolinova, Iva A1 - Domaradzki, Jarosław A1 - Flege, Jan Ingo T1 - Bare and Pd-doped ceria thin films prepared by ALD and EBE for hydrogen detection T2 - Verhandlungen der DPG N2 - The need to store and use hydrogen safely as part of green economy based on renewable energy evokes a necessity to reliably detect it at ambient conditions. The majority of currently used sensors are working at elevated temperatures (200-500 °C). In this work, we demonstrate that ceria films deposited on a commercial electrode by atomic layer deposition (ALD) and electron beam evaporation (EBE) electrically respond to hydrogen (from 20 to 500 ppm) at much lower temperatures (50-200 °C). The results reveal that <1.5 nm thin Pd adlayer increases the electrical response by several orders of magnitude for both ceria films. The NAP-XPS study under changing oxidative/reductive atmospheres sheds light on the mechanism of Pd-CeOx thermal activation and the role of the deposition technique in the reactivity of the oxide. KW - Hydrogen sensor KW - Atomic layer deposition (ALD) KW - ceria KW - Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) Y1 - 2024 UR - https://www.dpg-verhandlungen.de/year/2024/conference/berlin/part/o/session/59/contribution/5 SN - 0420-0195 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -