TY - GEN A1 - Kayatas, Zafer A1 - Bestle, Dieter A1 - Bestle, Pascal A1 - Reick, Robin T1 - Generation of Realistic Cut-in Maneuvers to Support Safety Assessment of Advanced Driver Assistance Systems T2 - Applied Mechanics Y1 - 2023 U6 - https://doi.org/10.3390/applmech4040054 SN - 2673-3161 VL - 4 IS - 4 SP - 1066 EP - 1077 ER - TY - JOUR A1 - Eberhard, Peter A1 - Hu, B. A1 - Bestle, Dieter T1 - Longitudinal Wave Propagation in Multiple Impacted Rods Y1 - 2001 ER - TY - JOUR A1 - Bestle, Dieter A1 - Zahariev, E. T1 - Virtual Nonlinear Multibody Systems Y1 - 2003 ER - TY - JOUR A1 - Bestle, Dieter A1 - Eberhard, Peter T1 - Optimization of a Contact Surface N2 - Zhe paper introduces ideas from shape optimization to multibody system dynamics. A disk rolling down a given slope is taken as a simple example, for which it is the goal of the optimization to shape the rolling contour of the disk such that it takes a minimum time to cover a certain distance. The shape of the sontour is described by its radius of curvature. The governing equations of motion result from the kinematics of relative motion and the Nowton-Euler formalism. Three different kinds of spirals are defined and optimized. KW - multibody system KW - contact surface KW - optimization KW - archimedes spiral Y1 - 2003 ER - TY - CHAP A1 - Bestle, Dieter A1 - Glora, Michael ED - Schiehlen, Werner T1 - Optimization of Passive and Active Dynamic Systems T2 - Virtual nonlinear multibody systems, proceedings of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, 23 June - 3 July 2002 Y1 - 2003 SN - 1-402-01339-6 PB - Kluwer CY - Dordrecht [u.a.] ER - TY - CHAP A1 - Bestle, Dieter T1 - Optimization of Dynamic Systems with Respect to Contact Surfaces Y1 - 2004 ER - TY - JOUR A1 - Bestle, Dieter A1 - Wachal, Andrej T1 - Multi-criterion Optimization of a Pneumatic Vibroinsulation System KW - Optimization Y1 - 2005 ER - TY - JOUR A1 - Bestle, Dieter A1 - Keskin, Akin T1 - Verbesserter Designprozess für moderne Hochdruckverdichter Y1 - 2004 ER - TY - CHAP A1 - Keskin, Akin A1 - Bestle, Dieter T1 - Application of Multi-objective Optimization to Axial Compressor Preliminary Design KW - axial compressor KW - aerodynamic design KW - meanline prediction KW - multi-objective optimization Y1 - 2005 ER - TY - CHAP A1 - Bestle, Dieter ED - Ulbrich, Heinz T1 - Design of a Laboratory Crane for Testing Control Approaches T2 - IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, proceedings of the IUTAM symposium held in Munich, Germany, 18-22 July 2005 KW - multibody dynamics KW - under-actuatd systems KW - control KW - optimization Y1 - 2005 SN - 1-4020-4160-8 SP - 101 EP - 110 PB - Springer CY - Dordrecht [u.a.] ER - TY - JOUR A1 - Bestle, Dieter T1 - Optimierung der Kontaktgeometrie einer Ringplattform Y1 - 2005 ER - TY - CHAP A1 - Nowicki, Daniel A1 - Bestle, Dieter A1 - Strasser, G. T1 - Empfindlichkeitsuntersuchung von Kraftfahrzeugen auf bremserregte Lenkraddrehschwingungen (LDS) mit Hilfe eines Komplettfahrzeugprüfstands Y1 - 2005 ER - TY - CHAP A1 - Beffinger, Marcin A1 - Bestle, Dieter T1 - Design of Progressive Shock Absorber Y1 - 2005 ER - TY - CHAP A1 - Wachal, Andrej A1 - Bestle, Dieter T1 - Use of Air Spring Elements for Vibration Insulation T2 - Proceedings, Fifth EUROMECH Nonlinear Dynamics Conference, August 7 - 12, 2005, Eindhoven University of Technology Y1 - 2005 SN - 90-386-2667-3 SP - 578 EP - 585 PB - Univ. of Technology CY - Eindhoven ER - TY - CHAP A1 - Keskin, Akin A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Modern Compressor Aerodynamic Blading Process using Multi-objective Optimization T2 - Proceedings of the ASME Turbo Expo 2006, presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain, Vol. 6, Part B Y1 - 2006 SN - 0-7918-4241-X SP - 1209 EP - 1216 PB - ASME CY - New York, NY ER - TY - CHAP A1 - Keskin, Akin A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Alternative Approach for Solving a Multi-Objective Optimization Problem in Aerodynamic Compressor Blade Design Y1 - 2006 ER - TY - JOUR A1 - Keskin, Akin A1 - Bestle, Dieter T1 - Application of Multi-objective Optimization to Axial Compressor Preliminary Design JF - Aerospace science and technology Y1 - 2006 SN - 0034-1223 SN - 1270-9638 VL - 10 IS - 7 SP - 581 EP - 589 ER - TY - GEN A1 - Swoboda, Marius A1 - Huppertz, André A1 - Bestle, Dieter T1 - Multidisziplinary Compressor Blading Design Process using Automation and Multi-Objective Optimization Y1 - 2006 ER - TY - CHAP A1 - Otto, Dierk A1 - Bestle, Dieter T1 - Automation and Optimisation of Compressor Blade Design with respect to Mechanical Criteria T2 - Deutscher Luft- und Raumfahrtkongress 2006, Braunschweig, 06. bis 09. November 2006, Bd. 2 Y1 - 2006 SP - 1209 EP - 1214 PB - DGLR CY - Bonn ER - TY - CHAP A1 - Bestle, Dieter T1 - Strategien der Mehrkriterien-Optimierung KW - Mehrkriterien-Optimierung Y1 - 2006 ER - TY - CHAP A1 - Eberhard, Peter A1 - Bestle, Dieter T1 - Computer-Aided Optimization of Mechanical Systems Y1 - 2005 ER - TY - CHAP A1 - Otto, Dierk A1 - Bestle, Dieter T1 - Multi-Disciplinary Blading Design by Means of Multi-Objective Optimisation KW - Optimisation KW - Multi-Disciplinary Blading Y1 - 2007 ER - TY - CHAP A1 - Dutta, Amit Kumar A1 - Flassig, Peter Michael A1 - Bestle, Dieter T1 - Multi-Objective Blade Design using a Quasi-3D Non-Dimensional Parameterization Approach KW - Quasi-3D Blading KW - Compressor KW - Multi-Objective Design Y1 - 2007 ER - TY - CHAP A1 - Bestle, Dieter T1 - Optimization of a Platform with respect to Force Contact Conditions KW - Optimization Y1 - 2007 ER - TY - CHAP A1 - Dutta, Amit Kumar A1 - Flassig, Peter Michael A1 - Bestle, Dieter T1 - A Non-Dimensional Quasi-3D Blade Design approach with respect to Aerodynamic Criteria T2 - Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C Y1 - 2008 SN - 978-0-7918-4316-1 SP - 2445 EP - 2455 PB - ASME CY - New York, NY ER - TY - CHAP A1 - Keskin, Akin A1 - Swoboda, Marius A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Accelerated Industrial Blade Design Based on Multi-Objective Optimization Using Surrogate Model Methodology T2 - Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C KW - Optimization KW - Blade Design Y1 - 2008 SN - 978-0-7918-4316-1 SP - 2339 EP - 2349 PB - ASME CY - New York, NY ER - TY - CHAP A1 - Funke, Torsten A1 - Bestle, Dieter T1 - Modellierung, Parameteridentifikation und Simulation passiver Fahrzeugstoßdämpfer KW - Modellierung KW - Parameteridentifikation KW - Simulation KW - Fahrzeugstoßdämpfer Y1 - 2008 ER - TY - JOUR A1 - Nguyen, Tuan-Anh A1 - Bestle, Dieter T1 - Application of Optimization Methods to Controller Design doe Active Suspensions Y1 - 2007 ER - TY - CHAP A1 - Keskin, Akin A1 - Bestle, Dieter T1 - A Method for Using Multi-objective Optimization within the Rolls-Royce meanline Prediction Process Y1 - 2005 ER - TY - CHAP A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Robustheits- und zuverlässigkeitsbasierte Mehrkriterien-Optimierung von Verdichterschaufeln Y1 - 2008 ER - TY - CHAP A1 - Dutta, Amit Kumar A1 - Flassig, Peter Michael A1 - Bestle, Dieter A1 - Keskin, Akin A1 - Swoboda, Marius T1 - Validierung optimierter Verdichterschaufeln mit Hilfe der 3D-CFD T2 - Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2 Y1 - 2008 N1 - DLRK 2008-081222 SP - 1023 EP - 1033 PB - Dt. Ges. für Luft- und Raumfahrt CY - Bonn ER - TY - CHAP A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Robuste Auslegung von Verdichterschaufeln T2 - Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2 Y1 - 2008 N1 - DLRK 2008-081174 SP - 1001 EP - 1010 PB - Dt. Ges. für Luft- und Raumfahrt CY - Bonn ER - TY - CHAP A1 - Sommer, Lars A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Krümmungs-Nebenbedingungen in der aerodynamischen Mehrkriterien-Optimierung von Verdichterschaufelprofilen T2 - Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2 Y1 - 2008 N1 - 2008-081195 SP - 1011 EP - 1022 PB - Dt. Ges. für Luft- und Raumfahrt CY - Bonn ER - TY - CHAP A1 - Dutta, Amit Kumar A1 - Flassig, Peter Michael A1 - Bestle, Dieter T1 - Validation of Q3D-Blade Optimisation Results by 3D-CFD Y1 - 2008 ER - TY - CHAP A1 - Hinz, Michel A1 - Bestle, Dieter T1 - A Topology Homogenisation Approach for Parameterising Compressors with Different Number of Stages within the Preliminary Meanline Design Process Y1 - 2008 ER - TY - CHAP A1 - Sommer, Lars A1 - Bestle, Dieter T1 - Speeding-up 2D Aerofoil Design by Using Curvature Constraints Y1 - 2008 ER - TY - CHAP A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - Robustheit und Zuverlässigkeit in der aerodynamischen Verdichterauslegung Y1 - 2008 ER - TY - CHAP A1 - Bestle, Dieter A1 - Keskin, Akin A1 - Otto, Dierk T1 - Process Integration and Automation for optimal Design Y1 - 2006 ER - TY - CHAP A1 - Dutta, Amit Kumar A1 - Flassig, Peter Michael A1 - Otto, Dierk A1 - Bestle, Dieter T1 - Process Integration for Multidisciplinary Multi-objective Blade Design Y1 - 2007 ER - TY - GEN A1 - Swoboda, Marius A1 - Huppertz, André A1 - Keskin, Akin A1 - Otto, Dierk A1 - Bestle, Dieter T1 - Multidisciplinary Compressor Blading Design Process using Automation and Multi-Objective optimization Y1 - 2006 ER - TY - JOUR A1 - Bestle, Dieter T1 - Optimization of a Platform with respect to Force Contact Conditions JF - Journal of computational and nonlinear dynamics Y1 - 2008 SN - 1555-1423 VL - 3 IS - 4 ER - TY - CHAP A1 - Keskin, Akin A1 - Swoboda, Marius A1 - Flassig, Peter Michael A1 - Dutta, Amit Kumar A1 - Bestle, Dieter T1 - New Optimization Strategy for Rapid industrial Blade Design Y1 - 2009 ER - TY - CHAP A1 - Hinz, Michel A1 - Bestle, Dieter T1 - Implementation of Individual iSIGHT-FD Components for Process Acceleration by Wrapping of FORTRAN-Routines Y1 - 2009 ER - TY - GEN A1 - Bestle, Dieter A1 - Hinz, Michel A1 - Rühle, Tobias T1 - Unterstützende Strategien für den robusten Triebwerksentwurf - Durch Prozessintegration, problemspezifische Parametrisierung und Mehrkriterien-Optimierung zum Erfolg KW - Mehrkriterien-Optimierung Y1 - 2009 ER - TY - CHAP A1 - Flassig, Peter Michael A1 - Bestle, Dieter T1 - Probabilistische Studien zur robusten aerodynamischen Verdichterauslegung Y1 - 2009 ER - TY - CHAP A1 - Schulz, Anatol A1 - Bestle, Dieter T1 - Acceleration of Compressor Blade Structural Design Process by Direct Use of Efficient 3D Aerofoil Parameterisation and Shell Elements Y1 - 2010 ER - TY - CHAP A1 - Funke, Torsten A1 - Bestle, Dieter T1 - Entwicklung eines physikalischen Dämpfermodells zur Analyse und Optimierung des Fahrverhaltens Y1 - 2010 ER - TY - CHAP A1 - Kahlbau, Sebastian A1 - Bestle, Dieter A1 - Matthies, Felix T1 - Mehrkriterielle Optimierung des Schaltablaufs von Automatikgetrieben Y1 - 2010 ER - TY - CHAP A1 - Rühle, Tobias A1 - Bestle, Dieter T1 - Ein Verfahren zur optimalen Hochdruckverdichterauslegung auf Basis der Meridianströmungsrechnung T2 - Deutscher Luft- und Raumfahrtkongress 2010, Hamburg, 31. August - 2. September 2010, Tagungsband KW - Optimierung KW - Meridianströmungsrechnung KW - Hochdruckverdichter Y1 - 2010 N1 - Dokument-ID: 161166 SP - 327 EP - 336 PB - DGLR CY - Bonn ER - TY - GEN A1 - Sommer, Lars A1 - Bestle, Dieter T1 - Curvature driven two-dimensional multi-objective optimization of compressor blade sections T2 - Aerospace Science and Technology Y1 - 2011 SN - 0034-1223 SN - 1270-9638 VL - 15 IS - 4 SP - 334 EP - 342 ER -